draft-ietf-ospf-ospfv3-mib-13.txt   draft-ietf-ospf-ospfv3-mib-14.txt 
Network Working Group D. Joyal (Editor) Network Working Group D. Joyal (Editor)
Internet Draft Nortel Internet Draft Nortel
Intended status: Standards Track V. Manral (Editor) Intended status: Standards Track V. Manral (Editor)
Expires: May 29, 2009 IP Infusion Expires: September 27, 2009 IP Infusion
November 25, 2008 March 26, 2009
Management Information Base for OSPFv3 Management Information Base for OSPFv3
draft-ietf-ospf-ospfv3-mib-13.txt draft-ietf-ospf-ospfv3-mib-14.txt
Status of this Memo Status of this Memo
By submitting this Internet-Draft, each author represents that any This Internet-Draft is submitted to IETF in full conformance with
applicable patent or other IPR claims of which he or she is aware the provisions of BCP 78 and BCP 79.
have been or will be disclosed, and any of which he or she becomes
aware will be disclosed, in accordance with Section 6 of BCP 79.
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as other groups may also distribute working documents as Internet-
Internet-Drafts. Drafts.
Internet-Drafts are draft documents valid for a maximum of six Internet-Drafts are draft documents valid for a maximum of six
months and may be updated, replaced, or obsoleted by other documents months and may be updated, replaced, or obsoleted by other documents
at any time. It is inappropriate to use Internet-Drafts as reference at any time. It is inappropriate to use Internet-Drafts as
material or to cite them other than as "work in progress." reference material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at The list of current Internet-Drafts can be accessed at
http://www.ietf.org/1id-abstracts.html http://www.ietf.org/ietf/1id-abstracts.txt.
The list of Internet-Draft Shadow Directories can be accessed at The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html http://www.ietf.org/shadow.html.
This Internet-Draft will expire on September, 2008. This Internet-Draft will expire on September 27, 2009.
Copyright Notice Copyright Notice
Copyright (C) The IETF Trust (2008). Copyright (c) 2009 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents in effect on the date of
publication of this document (http://trustee.ietf.org/license-
info). Please review these documents carefully, as they describe
your rights and restrictions with respect to this document.
This document may contain material from IETF Documents or IETF
Contributions published or made publicly available before November
10, 2008. The person(s) controlling the copyright in some of this
material may not have granted the IETF Trust the right to allow
modifications of such material outside the IETF Standards Process.
Without obtaining an adequate license from the person(s) controlling
the copyright in such materials, this document may not be modified
outside the IETF Standards Process, and derivative works of it may
not be created outside the IETF Standards Process, except to format
it for publication as an RFC or to translate it into languages other
than English.
Abstract Abstract
This memo defines a portion of the Management Information Base (MIB) This memo defines a portion of the Management Information Base (MIB)
for use with network management protocols in IPv6-based internets. for use with network management protocols in IPv6-based internets.
In particular, it defines objects for managing the Open Shortest Path In particular, it defines objects for managing the Open Shortest Path
First (OSPF) Routing Protocol for IPv6, otherwise known as OSPF First (OSPF) Routing Protocol for IPv6, otherwise known as OSPF
version 3 (OSPFv3). version 3 (OSPFv3).
Please send comments to ospf@ietf.org. Please send comments to ospf@ietf.org.
skipping to change at page 2, line 39 skipping to change at page 3, line 4
4.8. Area Aggregate Table.........................................7 4.8. Area Aggregate Table.........................................7
4.9. Notifications................................................8 4.9. Notifications................................................8
5. Definitions....................................................8 5. Definitions....................................................8
6. Security Considerations.......................................74 6. Security Considerations.......................................74
7. IANA Considerations...........................................74 7. IANA Considerations...........................................74
8. Acknowledgements..............................................75 8. Acknowledgements..............................................75
9. Normative References..........................................75 9. Normative References..........................................75
10. Informative References.......................................76 10. Informative References.......................................76
11. Contributors' Addresses......................................76 11. Contributors' Addresses......................................76
12. Authors' Addresses...........................................76 12. Authors' Addresses...........................................76
13. Full Copyright Statement.....................................77
14. Intellectual Property........................................77
1. The Internet-Standard Management Framework 1. The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to section 7 of Internet-Standard Management Framework, please refer to section 7 of
RFC 3410 [RFC3410]. RFC 3410 [RFC3410].
Managed objects are accessed via a virtual information store, termed Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. MIB objects are generally the Management Information Base or MIB. MIB objects are generally
accessed through the Simple Network Management Protocol (SNMP). accessed through the Simple Network Management Protocol (SNMP).
skipping to change at page 8, line 13 skipping to change at page 8, line 25
defined specifically as variables to be used with notifications. defined specifically as variables to be used with notifications.
5. Definitions 5. Definitions
OSPFV3-MIB DEFINITIONS ::= BEGIN OSPFV3-MIB DEFINITIONS ::= BEGIN
IMPORTS IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, mib-2, MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, mib-2,
Counter32, Gauge32, Integer32, Unsigned32 Counter32, Gauge32, Integer32, Unsigned32
FROM SNMPv2-SMI FROM SNMPv2-SMI
TEXTUAL-CONVENTION, TruthValue, RowStatus, TimeStamp, TEXTUAL-CONVENTION, TruthValue, RowStatus, TimeStamp
StorageType
FROM SNMPv2-TC FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF FROM SNMPv2-CONF
InterfaceIndex InterfaceIndex
FROM IF-MIB FROM IF-MIB
InetAddressType, InetAddress, InetAddressPrefixLength, InetAddressType, InetAddress, InetAddressPrefixLength,
InetAddressIPv6 InetAddressIPv6
FROM INET-ADDRESS-MIB FROM INET-ADDRESS-MIB
Metric, BigMetric, Status, Metric, BigMetric, Status,
HelloRange, DesignatedRouterPriority HelloRange, DesignatedRouterPriority
FROM OSPF-MIB; FROM OSPF-MIB;
ospfv3MIB MODULE-IDENTITY ospfv3MIB MODULE-IDENTITY
LAST-UPDATED "200811251200Z" LAST-UPDATED "200903261200Z"
ORGANIZATION "IETF OSPF Working Group" ORGANIZATION "IETF OSPF Working Group"
CONTACT-INFO CONTACT-INFO
"WG E-Mail: ospf@ietf.org "WG E-Mail: ospf@ietf.org
WG Chairs: Acee Lindem WG Chairs: Acee Lindem
acee@redback.com acee@redback.com
Abhay Roy Abhay Roy
akr@cisco.com akr@cisco.com
Editors: Dan Joyal Editors: Dan Joyal
skipping to change at page 8, line 43 skipping to change at page 9, line 4
acee@redback.com acee@redback.com
Abhay Roy Abhay Roy
akr@cisco.com akr@cisco.com
Editors: Dan Joyal Editors: Dan Joyal
Nortel Nortel
600 Technology Park Drive 600 Technology Park Drive
Billerica, MA 01821, USA Billerica, MA 01821, USA
djoyal@nortel.com djoyal@nortel.com
Vishwas Manral Vishwas Manral
IP Infusion IP Infusion
Bangalore Bangalore
India India
vishwas@ipinfusion.com" vishwas@ipinfusion.com"
DESCRIPTION DESCRIPTION
"The MIB module for OSPF version 3. "The MIB module for OSPF version 3.
Copyright (C) The IETF Trust (2008). Copyright (C) The IETF Trust (2009).
This version of this MIB module is part of This version of this MIB module is part of
RFC xxxx; see the RFC itself for full legal RFC xxxx; see the RFC itself for full legal
notices." notices."
REVISION "200811251200Z"
REVISION "200903261200Z"
DESCRIPTION -- RFC Editor assigns RFC xxxx DESCRIPTION -- RFC Editor assigns RFC xxxx
"Initial version, published as RFC xxxx" "Initial version, published as RFC xxxx"
-- RFC Ed.: replace xxxx with actual RFC number & remove this note -- RFC Ed.: replace xxxx with actual RFC number & remove this note
::= { mib-2 YYY } ::= { mib-2 YYY }
-- RFC Ed.: replace YYY with IANA-assigned number & remove this note -- RFC Ed.: replace YYY with IANA-assigned number & remove this note
-- Textual conventions -- Textual conventions
Ospfv3UpToRefreshIntervalTC ::= TEXTUAL-CONVENTION Ospfv3UpToRefreshIntervalTC ::= TEXTUAL-CONVENTION
skipping to change at page 9, line 47 skipping to change at page 10, line 8
DESCRIPTION DESCRIPTION
"A 32-bit, unsigned integer uniquely identifying the "A 32-bit, unsigned integer uniquely identifying the
router in the Autonomous System. To ensure router in the Autonomous System. To ensure
uniqueness, this may default to the value of one of uniqueness, this may default to the value of one of
the router's IPv4 host addresses if IPv4 is the router's IPv4 host addresses if IPv4 is
configured on the router." configured on the router."
REFERENCE REFERENCE
"OSPF Version 3, Section C.1 Global parameters" "OSPF Version 3, Section C.1 Global parameters"
SYNTAX Unsigned32 (1..'FFFFFFFF'h) SYNTAX Unsigned32 (1..'FFFFFFFF'h)
Ospfv3LsidTC ::= TEXTUAL-CONVENTION Ospfv3LsIdTC ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d" DISPLAY-HINT "d"
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A unique 32-bit identifier of the piece of the "A unique 32-bit identifier of the piece of the
routing domain that is being described by a Link routing domain that is being described by a Link
State advertisement. In contrast to OSPFv2, the State advertisement. In contrast to OSPFv2, the
LSID has no addressing semantics." LSID has no addressing semantics."
REFERENCE REFERENCE
"OSPF Version 2, Section 2.1.4 Link State ID" "OSPF Version 2, Section 2.1.4 Link State ID"
SYNTAX Unsigned32 (1..'FFFFFFFF'h) SYNTAX Unsigned32 (1..'FFFFFFFF'h)
skipping to change at page 11, line 35 skipping to change at page 11, line 48
the router's IPv4 interface addresses (if IPv4 the router's IPv4 interface addresses (if IPv4
is configured on the router). is configured on the router).
This object is persistent and when written the This object is persistent and when written the
entity SHOULD save the change to non-volatile entity SHOULD save the change to non-volatile
storage." storage."
REFERENCE REFERENCE
"OSPF Version 3, Section C.1 Global parameters" "OSPF Version 3, Section C.1 Global parameters"
::= { ospfv3GeneralGroup 1 } ::= { ospfv3GeneralGroup 1 }
ospfv3AdminStat OBJECT-TYPE ospfv3AdminStatus OBJECT-TYPE
SYNTAX Status SYNTAX Status
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The administrative status of OSPFv3 in the "The administrative status of OSPFv3 in the
router. The value 'enabled' denotes that the router. The value 'enabled' denotes that the
OSPFv3 Process is active on at least one OSPFv3 Process is active on at least one
interface; 'disabled' disables it on all interface; 'disabled' disables it on all
interfaces. interfaces.
skipping to change at page 20, line 43 skipping to change at page 21, line 4
"The number of times that the intra-area route "The number of times that the intra-area route
table has been calculated using this area's table has been calculated using this area's
link state database. This is typically done link state database. This is typically done
using Dijkstra's algorithm. using Dijkstra's algorithm.
Discontinuities in the value of this counter Discontinuities in the value of this counter
can occur at re-initialization of the management can occur at re-initialization of the management
system and at other times as indicated by the system and at other times as indicated by the
value of ospfv3DiscontinuityTime." value of ospfv3DiscontinuityTime."
::= { ospfv3AreaEntry 3 } ::= { ospfv3AreaEntry 3 }
ospfv3AreaBdrRtrCount OBJECT-TYPE ospfv3AreaBdrRtrCount OBJECT-TYPE
SYNTAX Gauge32 SYNTAX Gauge32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The total number of area border routers "The total number of area border routers
reachable within this area. This is initially zero, reachable within this area. This is initially zero,
and is calculated in each Shortest Path First(SPF) and is calculated in each Shortest Path First(SPF)
pass." pass."
DEFVAL { 0 }
::= { ospfv3AreaEntry 4 } ::= { ospfv3AreaEntry 4 }
ospfv3AreaAsBdrRtrCount OBJECT-TYPE ospfv3AreaAsBdrRtrCount OBJECT-TYPE
SYNTAX Gauge32 SYNTAX Gauge32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The total number of Autonomous System border "The total number of Autonomous System border
routers reachable within this area. This is routers reachable within this area. This is
initially zero, and is calculated in each SPF initially zero, and is calculated in each SPF
pass." pass."
DEFVAL { 0 }
::= { ospfv3AreaEntry 5 } ::= { ospfv3AreaEntry 5 }
ospfv3AreaScopeLsaCount OBJECT-TYPE ospfv3AreaScopeLsaCount OBJECT-TYPE
SYNTAX Gauge32 SYNTAX Gauge32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The total number of Area-Scope link state "The total number of Area-Scope link state
advertisements in this area's link state advertisements in this area's link state
database." database."
DEFVAL { 0 }
::= { ospfv3AreaEntry 6 } ::= { ospfv3AreaEntry 6 }
ospfv3AreaScopeLsaCksumSum OBJECT-TYPE ospfv3AreaScopeLsaCksumSum OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The 32-bit unsigned sum of the Area-Scope link state "The 32-bit unsigned sum of the Area-Scope link state
advertisements' LS checksums contained in this advertisements' LS checksums contained in this
area's link state database. The sum can be used area's link state database. The sum can be used
skipping to change at page 24, line 37 skipping to change at page 24, line 54
ospfv3AsLsdbRouterId, ospfv3AsLsdbRouterId,
ospfv3AsLsdbLsid } ospfv3AsLsdbLsid }
::= { ospfv3AsLsdbTable 1 } ::= { ospfv3AsLsdbTable 1 }
Ospfv3AsLsdbEntry ::= SEQUENCE { Ospfv3AsLsdbEntry ::= SEQUENCE {
ospfv3AsLsdbType ospfv3AsLsdbType
Unsigned32, Unsigned32,
ospfv3AsLsdbRouterId ospfv3AsLsdbRouterId
Ospfv3RouterIdTC, Ospfv3RouterIdTC,
ospfv3AsLsdbLsid ospfv3AsLsdbLsid
Ospfv3LsidTC, Ospfv3LsIdTC,
ospfv3AsLsdbSequence ospfv3AsLsdbSequence
Ospfv3LsaSequenceTC, Ospfv3LsaSequenceTC,
ospfv3AsLsdbAge ospfv3AsLsdbAge
Ospfv3LsaAgeTC, Ospfv3LsaAgeTC,
ospfv3AsLsdbChecksum ospfv3AsLsdbChecksum
Integer32, Integer32,
ospfv3AsLsdbAdvertisement ospfv3AsLsdbAdvertisement
OCTET STRING, OCTET STRING,
ospfv3AsLsdbTypeKnown ospfv3AsLsdbTypeKnown
TruthValue TruthValue
skipping to change at page 25, line 22 skipping to change at page 25, line 39
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The 32 bit number that uniquely identifies the "The 32 bit number that uniquely identifies the
originating router in the Autonomous System." originating router in the Autonomous System."
REFERENCE REFERENCE
"OSPF Version 2, Appendix C.1 Global parameters" "OSPF Version 2, Appendix C.1 Global parameters"
::= { ospfv3AsLsdbEntry 2 } ::= { ospfv3AsLsdbEntry 2 }
ospfv3AsLsdbLsid OBJECT-TYPE ospfv3AsLsdbLsid OBJECT-TYPE
SYNTAX Ospfv3LsidTC SYNTAX Ospfv3LsIdTC
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Link State ID is an LS Type Specific field "The Link State ID is an LS Type Specific field
containing a unique identifier; containing a unique identifier;
it identifies the piece of the routing domain it identifies the piece of the routing domain
that is being described by the advertisement. that is being described by the advertisement.
In contrast to OSPFv2, the LSID has no In contrast to OSPFv2, the LSID has no
addressing semantics." addressing semantics."
::= { ospfv3AsLsdbEntry 3 } ::= { ospfv3AsLsdbEntry 3 }
skipping to change at page 26, line 49 skipping to change at page 27, line 13
DESCRIPTION DESCRIPTION
"The entire Link State Advertisement, including "The entire Link State Advertisement, including
its header." its header."
::= { ospfv3AsLsdbEntry 7 } ::= { ospfv3AsLsdbEntry 7 }
ospfv3AsLsdbTypeKnown OBJECT-TYPE ospfv3AsLsdbTypeKnown OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates whether the LSA type is recognized by "The value true(1) indicates that the LSA type
this Router." is recognized by this Router."
::= { ospfv3AsLsdbEntry 8 } ::= { ospfv3AsLsdbEntry 8 }
-- OSPFv3 Area-Scope Link State Database -- OSPFv3 Area-Scope Link State Database
ospfv3AreaLsdbTable OBJECT-TYPE ospfv3AreaLsdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3AreaLsdbEntry SYNTAX SEQUENCE OF Ospfv3AreaLsdbEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The OSPFv3 Process's Area-Scope LSDB. "The OSPFv3 Process's Area-Scope LSDB.
The LSDB contains the Area-Scope Link State The LSDB contains the Area-Scope Link State
Advertisements from throughout the area that the Advertisements from throughout the area that the
device is attached to." device is attached to."
::= { ospfv3Objects 4 } ::= { ospfv3Objects 4 }
skipping to change at page 27, line 35 skipping to change at page 27, line 50
::= { ospfv3AreaLsdbTable 1 } ::= { ospfv3AreaLsdbTable 1 }
Ospfv3AreaLsdbEntry ::= SEQUENCE { Ospfv3AreaLsdbEntry ::= SEQUENCE {
ospfv3AreaLsdbAreaId ospfv3AreaLsdbAreaId
Ospfv3AreaIdTC, Ospfv3AreaIdTC,
ospfv3AreaLsdbType ospfv3AreaLsdbType
Unsigned32, Unsigned32,
ospfv3AreaLsdbRouterId ospfv3AreaLsdbRouterId
Ospfv3RouterIdTC, Ospfv3RouterIdTC,
ospfv3AreaLsdbLsid ospfv3AreaLsdbLsid
Ospfv3LsidTC, Ospfv3LsIdTC,
ospfv3AreaLsdbSequence ospfv3AreaLsdbSequence
Ospfv3LsaSequenceTC, Ospfv3LsaSequenceTC,
ospfv3AreaLsdbAge ospfv3AreaLsdbAge
Ospfv3LsaAgeTC, Ospfv3LsaAgeTC,
ospfv3AreaLsdbChecksum ospfv3AreaLsdbChecksum
Integer32, Integer32,
ospfv3AreaLsdbAdvertisement ospfv3AreaLsdbAdvertisement
OCTET STRING, OCTET STRING,
ospfv3AreaLsdbTypeKnown ospfv3AreaLsdbTypeKnown
TruthValue TruthValue
skipping to change at page 28, line 29 skipping to change at page 28, line 46
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The 32-bit number that uniquely identifies the "The 32-bit number that uniquely identifies the
originating router in the Autonomous System." originating router in the Autonomous System."
REFERENCE REFERENCE
"OSPF Version 2, Appendix C.1 Global parameters" "OSPF Version 2, Appendix C.1 Global parameters"
::= { ospfv3AreaLsdbEntry 3 } ::= { ospfv3AreaLsdbEntry 3 }
ospfv3AreaLsdbLsid OBJECT-TYPE ospfv3AreaLsdbLsid OBJECT-TYPE
SYNTAX Ospfv3LsidTC SYNTAX Ospfv3LsIdTC
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Link State ID is an LS Type Specific field "The Link State ID is an LS Type Specific field
containing a unique identifier; containing a unique identifier;
it identifies the piece of the routing domain it identifies the piece of the routing domain
that is being described by the advertisement. that is being described by the advertisement.
In contrast to OSPFv2, the LSID has no In contrast to OSPFv2, the LSID has no
addressing semantics." addressing semantics."
::= { ospfv3AreaLsdbEntry 4 } ::= { ospfv3AreaLsdbEntry 4 }
skipping to change at page 29, line 56 skipping to change at page 30, line 20
DESCRIPTION DESCRIPTION
"The entire Link State Advertisement, including "The entire Link State Advertisement, including
its header." its header."
::= { ospfv3AreaLsdbEntry 8 } ::= { ospfv3AreaLsdbEntry 8 }
ospfv3AreaLsdbTypeKnown OBJECT-TYPE ospfv3AreaLsdbTypeKnown OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates whether the LSA type is recognized "The value true(1) indicates that the LSA type is
by this Router." recognized by this Router."
::= { ospfv3AreaLsdbEntry 9 } ::= { ospfv3AreaLsdbEntry 9 }
-- OSPFv3 Link-Scope Link State Database, for non-virtual interfaces -- OSPFv3 Link-Scope Link State Database, for non-virtual interfaces
ospfv3LinkLsdbTable OBJECT-TYPE ospfv3LinkLsdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3LinkLsdbEntry SYNTAX SEQUENCE OF Ospfv3LinkLsdbEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The OSPFv3 Process's Link-Scope LSDB for non-virtual "The OSPFv3 Process's Link-Scope LSDB for non-virtual
skipping to change at page 30, line 43 skipping to change at page 31, line 9
Ospfv3LinkLsdbEntry ::= SEQUENCE { Ospfv3LinkLsdbEntry ::= SEQUENCE {
ospfv3LinkLsdbIfIndex ospfv3LinkLsdbIfIndex
InterfaceIndex, InterfaceIndex,
ospfv3LinkLsdbIfInstId ospfv3LinkLsdbIfInstId
Ospfv3IfInstIdTC, Ospfv3IfInstIdTC,
ospfv3LinkLsdbType ospfv3LinkLsdbType
Unsigned32, Unsigned32,
ospfv3LinkLsdbRouterId ospfv3LinkLsdbRouterId
Ospfv3RouterIdTC, Ospfv3RouterIdTC,
ospfv3LinkLsdbLsid ospfv3LinkLsdbLsid
Ospfv3LsidTC, Ospfv3LsIdTC,
ospfv3LinkLsdbSequence ospfv3LinkLsdbSequence
Ospfv3LsaSequenceTC, Ospfv3LsaSequenceTC,
ospfv3LinkLsdbAge ospfv3LinkLsdbAge
Ospfv3LsaAgeTC, Ospfv3LsaAgeTC,
ospfv3LinkLsdbChecksum ospfv3LinkLsdbChecksum
Integer32, Integer32,
ospfv3LinkLsdbAdvertisement ospfv3LinkLsdbAdvertisement
OCTET STRING, OCTET STRING,
ospfv3LinkLsdbTypeKnown ospfv3LinkLsdbTypeKnown
TruthValue TruthValue
skipping to change at page 31, line 45 skipping to change at page 32, line 10
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The 32 bit number that uniquely identifies the "The 32 bit number that uniquely identifies the
originating router in the Autonomous System." originating router in the Autonomous System."
REFERENCE REFERENCE
"OSPF Version 2, Appendix C.1 Global parameters" "OSPF Version 2, Appendix C.1 Global parameters"
::= { ospfv3LinkLsdbEntry 4 } ::= { ospfv3LinkLsdbEntry 4 }
ospfv3LinkLsdbLsid OBJECT-TYPE ospfv3LinkLsdbLsid OBJECT-TYPE
SYNTAX Ospfv3LsidTC SYNTAX Ospfv3LsIdTC
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Link State ID is an LS Type Specific field "The Link State ID is an LS Type Specific field
containing a unique identifier; containing a unique identifier;
it identifies the piece of the routing domain it identifies the piece of the routing domain
that is being described by the advertisement. that is being described by the advertisement.
In contrast to OSPFv2, the LSID has no In contrast to OSPFv2, the LSID has no
addressing semantics. However, in OSPFv3 addressing semantics. However, in OSPFv3
the Link State ID always contains the flooding the Link State ID always contains the flooding
skipping to change at page 33, line 22 skipping to change at page 33, line 39
DESCRIPTION DESCRIPTION
"The entire Link State Advertisement, including "The entire Link State Advertisement, including
its header." its header."
::= { ospfv3LinkLsdbEntry 9 } ::= { ospfv3LinkLsdbEntry 9 }
ospfv3LinkLsdbTypeKnown OBJECT-TYPE ospfv3LinkLsdbTypeKnown OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates whether the LSA type is recognized by this "The value true(1) indicates that the LSA type is
Router." recognized by this Router."
::= { ospfv3LinkLsdbEntry 10 } ::= { ospfv3LinkLsdbEntry 10 }
-- OSPF Host Table -- OSPF Host Table
ospfv3HostTable OBJECT-TYPE ospfv3HostTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3HostEntry SYNTAX SEQUENCE OF Ospfv3HostEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Host/Metric Table indicates what hosts are "The Host/Metric Table indicates what hosts are
skipping to change at page 34, line 14 skipping to change at page 34, line 31
Ospfv3HostEntry ::= SEQUENCE { Ospfv3HostEntry ::= SEQUENCE {
ospfv3HostAddressType ospfv3HostAddressType
InetAddressType, InetAddressType,
ospfv3HostAddress ospfv3HostAddress
InetAddress, InetAddress,
ospfv3HostMetric ospfv3HostMetric
Metric, Metric,
ospfv3HostRowStatus ospfv3HostRowStatus
RowStatus, RowStatus,
ospfv3HostAreaID ospfv3HostAreaID
Ospfv3AreaIdTC, Ospfv3AreaIdTC
ospfv3HostStorageType
StorageType
} }
ospfv3HostAddressType OBJECT-TYPE ospfv3HostAddressType OBJECT-TYPE
SYNTAX InetAddressType SYNTAX InetAddressType
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The address type of ospfv3HostAddress. Only IPv6 "The address type of ospfv3HostAddress. Only IPv6
global address type expected." global address type expected."
REFERENCE REFERENCE
"OSPF Version 2, Appendix C.6 Host route "OSPF Version 2, Appendix C.6 Host route
parameters" parameters"
::= { ospfv3HostEntry 1 } ::= { ospfv3HostEntry 1 }
ospfv3HostAddress OBJECT-TYPE ospfv3HostAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (16)) SYNTAX InetAddress
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The IPv6 Address of the Host. Must be an "The IPv6 Address of the Host. Must be an
IPv6 global address." IPv6 global address."
REFERENCE REFERENCE
"OSPF Version 2, Appendix C.6 Host route "OSPF Version 2, Appendix C.6 Host route
parameters" parameters"
::= { ospfv3HostEntry 2 } ::= { ospfv3HostEntry 2 }
skipping to change at page 35, line 29 skipping to change at page 35, line 44
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Area the Host Entry is to be found within. "The Area the Host Entry is to be found within.
By default, the area for the subsuming OSPFv3 By default, the area for the subsuming OSPFv3
interface or Area 0 if there is no subsuming interface or Area 0 if there is no subsuming
interface." interface."
REFERENCE REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters" "OSPF Version 2, Appendix C.2 Area parameters"
::= { ospfv3HostEntry 5 } ::= { ospfv3HostEntry 5 }
ospfv3HostStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
Manually configured entries will have a storage type
of nonVolatile while dynamically created entries
will have a storage type of volatile."
DEFVAL { nonVolatile }
::= { ospfv3HostEntry 6 }
-- OSPFv3 Interface Table -- OSPFv3 Interface Table
ospfv3IfTable OBJECT-TYPE ospfv3IfTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3IfEntry SYNTAX SEQUENCE OF Ospfv3IfEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The OSPFv3 Interface Table describes the "The OSPFv3 Interface Table describes the
interfaces from the viewpoint of OSPFv3." interfaces from the viewpoint of OSPFv3."
REFERENCE REFERENCE
"OSPF for IPv6, Appendix C.3 Router interface parameters "OSPF for IPv6, Appendix C.3 Router interface
parameters" parameters"
::= { ospfv3Objects 7 } ::= { ospfv3Objects 7 }
ospfv3IfEntry OBJECT-TYPE ospfv3IfEntry OBJECT-TYPE
SYNTAX Ospfv3IfEntry SYNTAX Ospfv3IfEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The OSPFv3 Interface Entry describes one "The OSPFv3 Interface Entry describes one
interface from the viewpoint of OSPFv3. interface from the viewpoint of OSPFv3.
skipping to change at page 36, line 27 skipping to change at page 36, line 30
Ospfv3IfEntry ::= SEQUENCE { Ospfv3IfEntry ::= SEQUENCE {
ospfv3IfIndex ospfv3IfIndex
InterfaceIndex, InterfaceIndex,
ospfv3IfInstId ospfv3IfInstId
Ospfv3IfInstIdTC, Ospfv3IfInstIdTC,
ospfv3IfAreaId ospfv3IfAreaId
Ospfv3AreaIdTC, Ospfv3AreaIdTC,
ospfv3IfType ospfv3IfType
INTEGER, INTEGER,
ospfv3IfAdminStat ospfv3IfAdminStatus
Status, Status,
ospfv3IfRtrPriority ospfv3IfRtrPriority
DesignatedRouterPriority, DesignatedRouterPriority,
ospfv3IfTransitDelay ospfv3IfTransitDelay
Ospfv3UpToRefreshIntervalTC, Ospfv3UpToRefreshIntervalTC,
ospfv3IfRetransInterval ospfv3IfRetransInterval
Ospfv3UpToRefreshIntervalTC, Ospfv3UpToRefreshIntervalTC,
ospfv3IfHelloInterval ospfv3IfHelloInterval
HelloRange, HelloRange,
ospfv3IfRtrDeadInterval ospfv3IfRtrDeadInterval
skipping to change at page 38, line 11 skipping to change at page 38, line 14
nbma(2), nbma(2),
pointToPoint(3), pointToPoint(3),
pointToMultipoint(5) pointToMultipoint(5)
} }
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The OSPFv3 interface type." "The OSPFv3 interface type."
::= { ospfv3IfEntry 4 } ::= { ospfv3IfEntry 4 }
ospfv3IfAdminStat OBJECT-TYPE ospfv3IfAdminStatus OBJECT-TYPE
SYNTAX Status SYNTAX Status
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The OSPFv3 interface's administrative status. "The OSPFv3 interface's administrative status.
The value formed on the interface, and the The value formed on the interface, and the
interface will be advertised as an internal route interface will be advertised as an internal route
to some area. The value 'disabled' denotes to some area. The value 'disabled' denotes
that the interface is external to OSPFv3." that the interface is external to OSPFv3.
Note that a value of 'disabled' for the object
ospfv3AdminStatus will override a value of
'enabled' for the interface."
DEFVAL { enabled } DEFVAL { enabled }
::= { ospfv3IfEntry 5 } ::= { ospfv3IfEntry 5 }
ospfv3IfRtrPriority OBJECT-TYPE ospfv3IfRtrPriority OBJECT-TYPE
SYNTAX DesignatedRouterPriority SYNTAX DesignatedRouterPriority
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The priority of this interface. Used in "The priority of this interface. Used in
multi-access networks, this field is used in multi-access networks, this field is used in
skipping to change at page 40, line 22 skipping to change at page 40, line 29
designatedRouter(5), designatedRouter(5),
backupDesignatedRouter(6), backupDesignatedRouter(6),
otherDesignatedRouter(7), otherDesignatedRouter(7),
standby(8) standby(8)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The OSPFv3 Interface State. An interface may be "The OSPFv3 Interface State. An interface may be
in standby state if there are multiple interfaces in standby state if there are multiple interfaces
on the link and another interface is active." on the link and another interface is active. The
interface may be in down state if the underlying
IPv6 interface is down or if the admin status is
'disabled' either globally or for the interface."
::= { ospfv3IfEntry 12 } ::= { ospfv3IfEntry 12 }
ospfv3IfDesignatedRouter OBJECT-TYPE ospfv3IfDesignatedRouter OBJECT-TYPE
SYNTAX Ospfv3RouterIdTC SYNTAX Ospfv3RouterIdTC
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Router ID of the Designated Router." "The Router ID of the Designated Router."
::= { ospfv3IfEntry 13 } ::= { ospfv3IfEntry 13 }
skipping to change at page 49, line 7 skipping to change at page 49, line 17
"Interface instance over which the neighbor "Interface instance over which the neighbor
can be reached. This ID has local link can be reached. This ID has local link
significance only." significance only."
::= { ospfv3NbrEntry 2 } ::= { ospfv3NbrEntry 2 }
ospfv3NbrRtrId OBJECT-TYPE ospfv3NbrRtrId OBJECT-TYPE
SYNTAX Ospfv3RouterIdTC SYNTAX Ospfv3RouterIdTC
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A 32-bit integer uniquely identifying the neighboring "A 32-bit unsigned integer uniquely identifying the
router in the Autonomous System." Neighboring router in the Autonomous System."
::= { ospfv3NbrEntry 3 } ::= { ospfv3NbrEntry 3 }
ospfv3NbrAddressType OBJECT-TYPE ospfv3NbrAddressType OBJECT-TYPE
SYNTAX InetAddressType SYNTAX InetAddressType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The address type of ospfv3NbrAddress. Only IPv6 "The address type of ospfv3NbrAddress. Only IPv6
addresses without zone index are expected." addresses without zone index are expected."
::= { ospfv3NbrEntry 4 } ::= { ospfv3NbrEntry 4 }
ospfv3NbrAddress OBJECT-TYPE ospfv3NbrAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (16)) SYNTAX InetAddress
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The IPv6 address of the neighbor associated with "The IPv6 address of the neighbor associated with
the local link." the local link."
::= { ospfv3NbrEntry 5 } ::= { ospfv3NbrEntry 5 }
ospfv3NbrOptions OBJECT-TYPE ospfv3NbrOptions OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-only MAX-ACCESS read-only
skipping to change at page 52, line 5 skipping to change at page 52, line 14
a topology change." a topology change."
::= { ospfv3NbrEntry 15 } ::= { ospfv3NbrEntry 15 }
-- OSPFv3 Configured Neighbor Table -- OSPFv3 Configured Neighbor Table
ospfv3CfgNbrTable OBJECT-TYPE ospfv3CfgNbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3CfgNbrEntry SYNTAX SEQUENCE OF Ospfv3CfgNbrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A table describing all configured neighbors." "A table describing all configured neighbors.
The configured neighbors table just gives
OSPFv3 information for sending OSPFv3 packets
to potential neighbors and is typically used
on nbma and point-to-multipoint networks.
Once a hello is received from a neighbor in
the configured neighbor table, an entry for
that neighbor is created in the neighbor table
and adjacency state is maintained there.
Neighbors on multi-access or point-to-point
networks can use multicast addressing, so only
neighbor table entries are created for them."
REFERENCE REFERENCE
"OSPF Version 2, Section 10 The Neighbor Data "OSPF Version 2, Section 10 The Neighbor Data
Structure" Structure"
::= { ospfv3Objects 10 } ::= { ospfv3Objects 10 }
ospfv3CfgNbrEntry OBJECT-TYPE ospfv3CfgNbrEntry OBJECT-TYPE
SYNTAX Ospfv3CfgNbrEntry SYNTAX Ospfv3CfgNbrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at page 53, line 22 skipping to change at page 53, line 44
ospfv3CfgNbrAddressType OBJECT-TYPE ospfv3CfgNbrAddressType OBJECT-TYPE
SYNTAX InetAddressType SYNTAX InetAddressType
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The address type of ospfv3NbrAddress. Only IPv6 "The address type of ospfv3NbrAddress. Only IPv6
addresses without zone index are expected." addresses without zone index are expected."
::= { ospfv3CfgNbrEntry 3 } ::= { ospfv3CfgNbrEntry 3 }
ospfv3CfgNbrAddress OBJECT-TYPE ospfv3CfgNbrAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (16)) SYNTAX InetAddress
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The IPv6 address of the neighbor associated with "The IPv6 address of the neighbor associated with
the local link." the local link."
::= { ospfv3CfgNbrEntry 4 } ::= { ospfv3CfgNbrEntry 4 }
ospfv3CfgNbrPriority OBJECT-TYPE ospfv3CfgNbrPriority OBJECT-TYPE
SYNTAX DesignatedRouterPriority SYNTAX DesignatedRouterPriority
MAX-ACCESS read-create MAX-ACCESS read-create
skipping to change at page 55, line 49 skipping to change at page 56, line 19
ospfv3VirtNbrAddressType OBJECT-TYPE ospfv3VirtNbrAddressType OBJECT-TYPE
SYNTAX InetAddressType SYNTAX InetAddressType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The address type of ospfv3VirtNbrAddress. Only IPv6 "The address type of ospfv3VirtNbrAddress. Only IPv6
addresses without zone index are expected." addresses without zone index are expected."
::= { ospfv3VirtNbrEntry 5 } ::= { ospfv3VirtNbrEntry 5 }
ospfv3VirtNbrAddress OBJECT-TYPE ospfv3VirtNbrAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (16)) SYNTAX InetAddress
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The IPv6 address advertised by this Virtual Neighbor. "The IPv6 address advertised by this Virtual Neighbor.
It must be a Global scope address." It must be a Global scope address."
::= { ospfv3VirtNbrEntry 6 } ::= { ospfv3VirtNbrEntry 6 }
ospfv3VirtNbrOptions OBJECT-TYPE ospfv3VirtNbrOptions OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A Bit Mask corresponding to the neighbor's options "A Bit Mask corresponding to the neighbor's options
field." field."
REFERENCE REFERENCE
"OSPF Version 3, Appendix A.2 the Options field" "OSPF Version 3, Appendix A.2 the Options field"
::= { ospfv3VirtNbrEntry 7 } ::= { ospfv3VirtNbrEntry 7 }
skipping to change at page 61, line 49 skipping to change at page 62, line 19
Ospfv3VirtLinkLsdbEntry ::= SEQUENCE { Ospfv3VirtLinkLsdbEntry ::= SEQUENCE {
ospfv3VirtLinkLsdbIfAreaId ospfv3VirtLinkLsdbIfAreaId
Ospfv3AreaIdTC, Ospfv3AreaIdTC,
ospfv3VirtLinkLsdbIfNeighbor ospfv3VirtLinkLsdbIfNeighbor
Ospfv3RouterIdTC, Ospfv3RouterIdTC,
ospfv3VirtLinkLsdbType ospfv3VirtLinkLsdbType
Unsigned32, Unsigned32,
ospfv3VirtLinkLsdbRouterId ospfv3VirtLinkLsdbRouterId
Ospfv3RouterIdTC, Ospfv3RouterIdTC,
ospfv3VirtLinkLsdbLsid ospfv3VirtLinkLsdbLsid
Ospfv3LsidTC, Ospfv3LsIdTC,
ospfv3VirtLinkLsdbSequence ospfv3VirtLinkLsdbSequence
Ospfv3LsaSequenceTC, Ospfv3LsaSequenceTC,
ospfv3VirtLinkLsdbAge ospfv3VirtLinkLsdbAge
Ospfv3LsaAgeTC, Ospfv3LsaAgeTC,
ospfv3VirtLinkLsdbChecksum ospfv3VirtLinkLsdbChecksum
Integer32, Integer32,
ospfv3VirtLinkLsdbAdvertisement ospfv3VirtLinkLsdbAdvertisement
OCTET STRING, OCTET STRING,
ospfv3VirtLinkLsdbTypeKnown ospfv3VirtLinkLsdbTypeKnown
TruthValue TruthValue
skipping to change at page 62, line 51 skipping to change at page 63, line 20
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The 32 bit number that uniquely identifies the "The 32 bit number that uniquely identifies the
originating router in the Autonomous System." originating router in the Autonomous System."
REFERENCE REFERENCE
"OSPF Version 2, Appendix C.1 Global parameters" "OSPF Version 2, Appendix C.1 Global parameters"
::= { ospfv3VirtLinkLsdbEntry 4 } ::= { ospfv3VirtLinkLsdbEntry 4 }
ospfv3VirtLinkLsdbLsid OBJECT-TYPE ospfv3VirtLinkLsdbLsid OBJECT-TYPE
SYNTAX Ospfv3LsidTC SYNTAX Ospfv3LsIdTC
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Link State ID is an LS Type Specific field "The Link State ID is an LS Type Specific field
containing a unique identifier; containing a unique identifier;
it identifies the piece of the routing domain it identifies the piece of the routing domain
that is being described by the advertisement. that is being described by the advertisement.
In contrast to OSPFv2, the LSID has no In contrast to OSPFv2, the LSID has no
addressing semantics." addressing semantics."
::= { ospfv3VirtLinkLsdbEntry 5 } ::= { ospfv3VirtLinkLsdbEntry 5 }
skipping to change at page 64, line 25 skipping to change at page 64, line 47
DESCRIPTION DESCRIPTION
"The entire Link State Advertisement, including "The entire Link State Advertisement, including
its header." its header."
::= { ospfv3VirtLinkLsdbEntry 9 } ::= { ospfv3VirtLinkLsdbEntry 9 }
ospfv3VirtLinkLsdbTypeKnown OBJECT-TYPE ospfv3VirtLinkLsdbTypeKnown OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates whether the LSA type is recognized by this "The value true(1) indicates that the LSA type is
Router." recognized by this Router."
::= { ospfv3VirtLinkLsdbEntry 10 } ::= { ospfv3VirtLinkLsdbEntry 10 }
-- The Ospfv3 Notification Table -- The Ospfv3 Notification Table
-- The Ospfv3 Notification Table records fields that are -- The Ospfv3 Notification Table records fields that are
-- required for notifications -- required for notifications
ospfv3NotificationEntry OBJECT IDENTIFIER ospfv3NotificationEntry OBJECT IDENTIFIER
::= { ospfv3Objects 14 } ::= { ospfv3Objects 14 }
ospfv3ConfigErrorType OBJECT-TYPE ospfv3ConfigErrorType OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
badVersion (1), badVersion (1),
areaMismatch (2), areaMismatch (2),
unknownNbmaNbr (3), -- Router is DR eligible unknownNbmaNbr (3), -- Router is DR eligible
unknownVirtualNbr (4), unknownVirtualNbr (4),
helloIntervalMismatch (5), helloIntervalMismatch (5),
skipping to change at page 64, line 54 skipping to change at page 65, line 24
deadIntervalMismatch (6), deadIntervalMismatch (6),
optionMismatch (7), optionMismatch (7),
mtuMismatch (8), mtuMismatch (8),
duplicateRouterId (9), duplicateRouterId (9),
noError (10) } noError (10) }
MAX-ACCESS accessible-for-notify MAX-ACCESS accessible-for-notify
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Potential types of configuration conflicts. "Potential types of configuration conflicts.
Used by the ospfv3ConfigError and Used by the ospfv3ConfigError and
ospfv3ConfigVirtError notifications. When the last value ospfv3ConfigVirtError notifications."
of a notification using this object is needed, but no
notifications of that type have been sent, the value
pertaining to this object should be returned as
noError."
::= { ospfv3NotificationEntry 1 } ::= { ospfv3NotificationEntry 1 }
ospfv3PacketType OBJECT-TYPE ospfv3PacketType OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
hello (1), hello (1),
dbDescript (2), dbDescript (2),
lsReq (3), lsReq (3),
lsUpdate (4), lsUpdate (4),
lsAck (5), lsAck (5),
nullPacket (6) } nullPacket (6) }
MAX-ACCESS accessible-for-notify MAX-ACCESS accessible-for-notify
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"OSPFv3 packet types. When the last value of a notification "OSPFv3 packet types."
using this object is needed, but no notifications of
that type have been sent, the value pertaining
to this object should be returned as nullPacket."
::= { ospfv3NotificationEntry 2 } ::= { ospfv3NotificationEntry 2 }
ospfv3PacketSrc OBJECT-TYPE ospfv3PacketSrc OBJECT-TYPE
SYNTAX InetAddressIPv6 SYNTAX InetAddressIPv6
MAX-ACCESS accessible-for-notify MAX-ACCESS accessible-for-notify
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The IPv6 address of an inbound packet that cannot "The IPv6 address of an inbound packet that cannot
be identified by a neighbor instance. When be identified by a neighbor instance.
the last value of a notification using this object is
needed, but no notifications of that type have been sent,
the value pertaining to this object should
be returned as 0.
Only IPv6 addresses without zone index are expected." Only IPv6 addresses without zone index are expected."
::= { ospfv3NotificationEntry 3 } ::= { ospfv3NotificationEntry 3 }
-- Notification definitions -- Notification definitions
-- The notifications need to throttled so as to not overwhelm the -- The notifications need to throttled so as to not overwhelm the
-- management agent, in case of rapid changes to the OSPFv3 module. -- management agent, in case of rapid changes to the OSPFv3 module.
ospfv3VirtIfStateChange NOTIFICATION-TYPE ospfv3VirtIfStateChange NOTIFICATION-TYPE
skipping to change at page 69, line 44 skipping to change at page 70, line 4
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An ospfv3VirtNbrRestartHelperStatusChange "An ospfv3VirtNbrRestartHelperStatusChange
notification signifies that there has been a notification signifies that there has been a
change in the graceful restart helper state for change in the graceful restart helper state for
the virtual neighbor. This notification should be the virtual neighbor. This notification should be
generated when the virtual neighbor restart helper status generated when the virtual neighbor restart helper status
transitions for a virtual neighbor." transitions for a virtual neighbor."
::= { ospfv3Notifications 14 } ::= { ospfv3Notifications 14 }
-- conformance information -- conformance information
ospfv3Groups OBJECT IDENTIFIER ::= { ospfv3Conformance 1 } ospfv3Groups OBJECT IDENTIFIER ::= { ospfv3Conformance 1 }
ospfv3Compliances OBJECT IDENTIFIER ::= { ospfv3Conformance 2 } ospfv3Compliances OBJECT IDENTIFIER ::= { ospfv3Conformance 2 }
-- compliance statements -- compliance statements
ospfv3Compliance MODULE-COMPLIANCE ospfv3FullCompliance MODULE-COMPLIANCE
STATUS current STATUS current
DESCRIPTION "The compliance statement" DESCRIPTION "The compliance statement"
MODULE -- this module MODULE -- this module
MANDATORY-GROUPS { MANDATORY-GROUPS {
ospfv3BasicGroup, ospfv3BasicGroup,
ospfv3AreaGroup, ospfv3AreaGroup,
ospfv3IfGroup, ospfv3IfGroup,
ospfv3VirtIfGroup, ospfv3VirtIfGroup,
ospfv3NbrGroup, ospfv3NbrGroup,
ospfv3CfgNbrGroup, ospfv3CfgNbrGroup,
skipping to change at page 71, line 6 skipping to change at page 71, line 17
DESCRIPTION DESCRIPTION
"This group is required for OSPFv3 systems that "This group is required for OSPFv3 systems that
support OSPFv3 notifications." support OSPFv3 notifications."
OBJECT ospfv3NbrAddressType OBJECT ospfv3NbrAddressType
SYNTAX InetAddressType { ipv6(2) } SYNTAX InetAddressType { ipv6(2) }
DESCRIPTION DESCRIPTION
"An implementation is only required to support IPv6 "An implementation is only required to support IPv6
address without zone index." address without zone index."
OBJECT ospfv3NbrAddress
SYNTAX InetAddress (SIZE (16))
DESCRIPTION
"An implementation is only required to support IPv6
address without zone index."
OBJECT ospfv3VirtNbrAddressType OBJECT ospfv3VirtNbrAddressType
SYNTAX InetAddressType { ipv6(2) } SYNTAX InetAddressType { ipv6(2) }
DESCRIPTION DESCRIPTION
"An implementation is only required to support IPv6 "An implementation is only required to support IPv6
address without zone index." address without zone index."
OBJECT ospfv3VirtNbrAddress
SYNTAX InetAddress (SIZE (16))
DESCRIPTION
"An implementation is only required to support IPv6
address without zone index."
::= { ospfv3Compliances 1 } ::= { ospfv3Compliances 1 }
ospfv3ReadOnlyCompliance MODULE-COMPLIANCE ospfv3ReadOnlyCompliance MODULE-COMPLIANCE
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"When this MIB is implemented without support for "When this MIB is implemented without support for
read-create (i.e., in read-only mode), the read-create (i.e., in read-only mode), the
implementation can claim read-only compliance. Such implementation can claim read-only compliance. Such
a device can then be monitored but cannot be a device can then be monitored, but cannot be
configured with this MIB." configured with this MIB."
MODULE -- this module MODULE -- this module
MANDATORY-GROUPS { MANDATORY-GROUPS {
ospfv3BasicGroup, ospfv3BasicGroup,
ospfv3AreaGroup, ospfv3AreaGroup,
ospfv3IfGroup, ospfv3IfGroup,
ospfv3VirtIfGroup, ospfv3VirtIfGroup,
ospfv3NbrGroup, ospfv3NbrGroup,
ospfv3CfgNbrGroup, ospfv3CfgNbrGroup,
skipping to change at page 72, line 19 skipping to change at page 72, line 43
GROUP ospfv3NotificationObjectGroup GROUP ospfv3NotificationObjectGroup
DESCRIPTION DESCRIPTION
"This group is required for OSPFv3 systems that "This group is required for OSPFv3 systems that
support OSPFv3 notifications." support OSPFv3 notifications."
GROUP ospfv3NotificationGroup GROUP ospfv3NotificationGroup
DESCRIPTION DESCRIPTION
"This group is required for OSPFv3 systems that "This group is required for OSPFv3 systems that
support OSPFv3 notifications." support OSPFv3 notifications."
OBJECT ospfv3NbrAddressType
SYNTAX InetAddressType { ipv6(2) }
DESCRIPTION
"An implementation is only required to support IPv6
address without zone index."
OBJECT ospfv3VirtNbrAddressType
SYNTAX InetAddressType { ipv6(2) }
DESCRIPTION
"An implementation is only required to support IPv6
address without zone index."
OBJECT ospfv3RouterId OBJECT ospfv3RouterId
MIN-ACCESS read-only MIN-ACCESS read-only
DESCRIPTION DESCRIPTION
"Write access is not required." "Write access is not required."
OBJECT ospfv3AdminStat OBJECT ospfv3AdminStatus
MIN-ACCESS read-only MIN-ACCESS read-only
DESCRIPTION DESCRIPTION
"Write access is not required." "Write access is not required."
OBJECT ospfv3ExtAreaLsdbLimit OBJECT ospfv3ExtAreaLsdbLimit
MIN-ACCESS read-only MIN-ACCESS read-only
DESCRIPTION DESCRIPTION
"Write access is not required." "Write access is not required."
OBJECT ospfv3ExitOverflowInterval OBJECT ospfv3ExitOverflowInterval
MIN-ACCESS read-only MIN-ACCESS read-only
DESCRIPTION DESCRIPTION
"Write access is not required." "Write access is not required."
OBJECT ospfv3DemandExtensions OBJECT ospfv3DemandExtensions
MIN-ACCESS read-only MIN-ACCESS read-only
DESCRIPTION DESCRIPTION
"Write access is not required." "Write access is not required."
OBJECT ospfv3ReferenceBandwidth OBJECT ospfv3ReferenceBandwidth
MIN-ACCESS read-only MIN-ACCESS read-only
DESCRIPTION DESCRIPTION
"Write access is not required." "Write access is not required."
OBJECT ospfv3RestartSupport OBJECT ospfv3RestartSupport
MIN-ACCESS read-only MIN-ACCESS read-only
DESCRIPTION DESCRIPTION
"Write access is not required." "Write access is not required."
skipping to change at page 73, line 29 skipping to change at page 73, line 39
OBJECT ospfv3RestartStrictLsaChecking OBJECT ospfv3RestartStrictLsaChecking
MIN-ACCESS read-only MIN-ACCESS read-only
DESCRIPTION DESCRIPTION
"Write access is not required." "Write access is not required."
OBJECT ospfv3NotificationEnable OBJECT ospfv3NotificationEnable
MIN-ACCESS read-only MIN-ACCESS read-only
DESCRIPTION DESCRIPTION
"Write access is not required." "Write access is not required."
OBJECT ospfv3StubRouterSupport
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ospfv3StubRouterAdvertisement OBJECT ospfv3StubRouterAdvertisement
MIN-ACCESS read-only MIN-ACCESS read-only
DESCRIPTION DESCRIPTION
"Write access is not required." "Write access is not required."
OBJECT ospfv3AreaImportAsExtern OBJECT ospfv3AreaImportAsExtern
MIN-ACCESS read-only MIN-ACCESS read-only
DESCRIPTION DESCRIPTION
"Write access is not required." "Write access is not required."
skipping to change at page 74, line 41 skipping to change at page 74, line 47
OBJECT ospfv3HostRowStatus OBJECT ospfv3HostRowStatus
MIN-ACCESS read-only MIN-ACCESS read-only
DESCRIPTION DESCRIPTION
"Write access is not required." "Write access is not required."
OBJECT ospfv3HostAreaID OBJECT ospfv3HostAreaID
MIN-ACCESS read-only MIN-ACCESS read-only
DESCRIPTION DESCRIPTION
"Write access is not required." "Write access is not required."
OBJECT ospfv3HostStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ospfv3IfAreaId OBJECT ospfv3IfAreaId
MIN-ACCESS read-only MIN-ACCESS read-only
DESCRIPTION DESCRIPTION
"Write access is not required." "Write access is not required."
OBJECT ospfv3IfType OBJECT ospfv3IfType
MIN-ACCESS read-only MIN-ACCESS read-only
DESCRIPTION DESCRIPTION
"Write access is not required." "Write access is not required."
OBJECT ospfv3IfAdminStatus
OBJECT ospfv3IfAdminStat
MIN-ACCESS read-only MIN-ACCESS read-only
DESCRIPTION DESCRIPTION
"Write access is not required." "Write access is not required."
OBJECT ospfv3IfRtrPriority OBJECT ospfv3IfRtrPriority
MIN-ACCESS read-only MIN-ACCESS read-only
DESCRIPTION DESCRIPTION
"Write access is not required." "Write access is not required."
OBJECT ospfv3IfTransitDelay OBJECT ospfv3IfTransitDelay
skipping to change at page 75, line 38 skipping to change at page 75, line 39
OBJECT ospfv3IfRtrDeadInterval OBJECT ospfv3IfRtrDeadInterval
MIN-ACCESS read-only MIN-ACCESS read-only
DESCRIPTION DESCRIPTION
"Write access is not required." "Write access is not required."
OBJECT ospfv3IfPollInterval OBJECT ospfv3IfPollInterval
MIN-ACCESS read-only MIN-ACCESS read-only
DESCRIPTION DESCRIPTION
"Write access is not required." "Write access is not required."
OBJECT ospfv3IfState
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ospfv3IfRowStatus OBJECT ospfv3IfRowStatus
MIN-ACCESS read-only MIN-ACCESS read-only
DESCRIPTION DESCRIPTION
"Write access is not required." "Write access is not required."
OBJECT ospfv3IfDemand OBJECT ospfv3IfDemand
MIN-ACCESS read-only MIN-ACCESS read-only
DESCRIPTION DESCRIPTION
"Write access is not required." "Write access is not required."
skipping to change at page 77, line 34 skipping to change at page 77, line 30
DESCRIPTION DESCRIPTION
"Write access is not required." "Write access is not required."
::= { ospfv3Compliances 2 } ::= { ospfv3Compliances 2 }
-- units of conformance -- units of conformance
ospfv3BasicGroup OBJECT-GROUP ospfv3BasicGroup OBJECT-GROUP
OBJECTS { OBJECTS {
ospfv3RouterId, ospfv3RouterId,
ospfv3AdminStat, ospfv3AdminStatus,
ospfv3VersionNumber, ospfv3VersionNumber,
ospfv3AreaBdrRtrStatus, ospfv3AreaBdrRtrStatus,
ospfv3ASBdrRtrStatus, ospfv3ASBdrRtrStatus,
ospfv3AsScopeLsaCount, ospfv3AsScopeLsaCount,
ospfv3AsScopeLsaCksumSum, ospfv3AsScopeLsaCksumSum,
ospfv3OriginateNewLsas, ospfv3OriginateNewLsas,
ospfv3RxNewLsas, ospfv3RxNewLsas,
ospfv3ExtLsaCount, ospfv3ExtLsaCount,
ospfv3ExtAreaLsdbLimit, ospfv3ExtAreaLsdbLimit,
ospfv3ExitOverflowInterval, ospfv3ExitOverflowInterval,
skipping to change at page 79, line 31 skipping to change at page 79, line 27
DESCRIPTION DESCRIPTION
"These objects are used for OSPFv3 systems "These objects are used for OSPFv3 systems
that display their Link-scope link state database that display their Link-scope link state database
for non-virtual interfaces." for non-virtual interfaces."
::= { ospfv3Groups 5 } ::= { ospfv3Groups 5 }
ospfv3HostGroup OBJECT-GROUP ospfv3HostGroup OBJECT-GROUP
OBJECTS { OBJECTS {
ospfv3HostMetric, ospfv3HostMetric,
ospfv3HostRowStatus, ospfv3HostRowStatus,
ospfv3HostAreaID, ospfv3HostAreaID
ospfv3HostStorageType
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"These objects are used for OSPFv3 systems "These objects are used for OSPFv3 systems
that support attached hosts." that support attached hosts."
::= { ospfv3Groups 6 } ::= { ospfv3Groups 6 }
ospfv3IfGroup OBJECT-GROUP ospfv3IfGroup OBJECT-GROUP
OBJECTS { OBJECTS {
ospfv3IfAreaId, ospfv3IfAreaId,
ospfv3IfType, ospfv3IfType,
ospfv3IfAdminStat, ospfv3IfAdminStatus,
ospfv3IfRtrPriority, ospfv3IfRtrPriority,
ospfv3IfTransitDelay, ospfv3IfTransitDelay,
ospfv3IfRetransInterval, ospfv3IfRetransInterval,
ospfv3IfHelloInterval, ospfv3IfHelloInterval,
ospfv3IfRtrDeadInterval, ospfv3IfRtrDeadInterval,
ospfv3IfPollInterval, ospfv3IfPollInterval,
ospfv3IfState, ospfv3IfState,
ospfv3IfDesignatedRouter, ospfv3IfDesignatedRouter,
ospfv3IfBackupDesignatedRouter, ospfv3IfBackupDesignatedRouter,
ospfv3IfEvents, ospfv3IfEvents,
skipping to change at page 85, line 45 skipping to change at line 4439
Nortel Nortel
600 Technology Park Drive 600 Technology Park Drive
Billerica, MA 01821 Billerica, MA 01821
Email: djoyal@nortel.com Email: djoyal@nortel.com
Vishwas Manral Vishwas Manral
IP Infusion IP Infusion
Bangalore Bangalore
India India
Email: vishwas@ipinfusion.com Email: vishwas@ipinfusion.com
13. Full Copyright Statement
Copyright (C) The IETF Trust (2008).
This document is subject to the rights, licenses and restrictions
contained in BCP 78, and except as set forth therein, the authors
retain all their rights.
This document and the information contained herein are provided
on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE
REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE
IETF TRUST AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY
WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE
ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE.
14. Intellectual Property
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be
claimed to pertain to the implementation or use of the technology
described in this document or the extent to which any license
under such rights might or might not be available; nor does it
represent that it has made any independent effort to identify any
such rights. Information on the procedures with respect to
rights in RFC documents can be found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the
use of such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR
repository at http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention
any copyrights, patents or patent applications, or other
proprietary rights that may cover technology that may be required
to implement this standard. Please address the information to the
IETF at ietf-ipr@ietf.org.
 End of changes. 69 change blocks. 
122 lines changed or deleted 115 lines changed or added

This html diff was produced by rfcdiff 1.35. The latest version is available from http://tools.ietf.org/tools/rfcdiff/