draft-ietf-ospf-ospfv3-mib-11.txt   draft-ietf-ospf-ospfv3-mib-12.txt 
Network Working Group Editors Network Working Group Editors
Internet Draft
Dan Joyal Intended status: Standards track Dan Joyal
Internet Draft Nortel Expires: March 18, 2007 Nortel
Vishwas Manral Vishwas Manral
IP Infusion IP Infusion
Document: draft-ietf-ospf-ospfv3-mib-11.txt August 2006 September 17, 2007
Expires: February 2007
Management Information Base for OSPFv3 Management Information Base for OSPFv3
draft-ietf-ospf-ospfv3-mib-12.txt
Revisions from version 11.
- Added standby enumeration to ospfv3IfState object
- Removed units clause from ospfv3IfDemandNbrProbeRetxLimit
- Re-numbered objects in Area Aggregate Table to correct a gap
in the numbering
- Removed section on differences from RFC 1850
- Added stub router support and stub router advertisement
objects
- Added discontinuity timer object
- Added link-local LSDB for virtual links
- Added section describing OSPFv3 Notifications
- Added additional values to OSPFv3 Notifications
- Make OSPFv3 Notifications optional
- Removed ospfv3MulticastExtensions and
ospfv3IfMulticastForwarding objects because
they are deprecated in OSPFv3
- Minor editoral changes
Status of this Memo Status of this Memo
By submitting this Internet-Draft, each author represents that any By submitting this Internet-Draft, each author represents that any
applicable patent or other IPR claims of which he or she is aware applicable patent or other IPR claims of which he or she is aware
have been or will be disclosed, and any of which he or she becomes have been or will be disclosed, and any of which he or she becomes
aware will be disclosed, in accordance with Section 6 of BCP 79. aware will be disclosed, in accordance with Section 6 of BCP 79.
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that Task Force (IETF), its areas, and its working groups. Note that
skipping to change at page 1, line 35 skipping to change at page 2, line 4
other groups may also distribute working documents as other groups may also distribute working documents as
Internet-Drafts. Internet-Drafts.
Internet-Drafts are draft documents valid for a maximum of six Internet-Drafts are draft documents valid for a maximum of six
months and may be updated, replaced, or obsoleted by other documents months and may be updated, replaced, or obsoleted by other documents
at any time. It is inappropriate to use Internet-Drafts as reference at any time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress." material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at The list of current Internet-Drafts can be accessed at
http://www.ietf.org/1id-abstracts.html http://www.ietf.org/1id-abstracts.html
The list of Internet-Draft Shadow Directories can be accessed at The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html http://www.ietf.org/shadow.html
This Internet-Draft will expire on March 18, 2007.
Copyright Notice Copyright Notice
Copyright (C) The Internet Society (2006). All rights reserved. Copyright (C) The IETF Trust (2007).
Abstract Abstract
This memo defines a portion of the Management Information Base (MIB) This memo defines a portion of the Management Information Base (MIB)
for use with network management protocols in IPv6-based internets. for use with network management protocols in IPv6-based internets.
In particular, it defines objects for managing the Open Shortest Path In particular, it defines objects for managing the Open Shortest Path
First Routing Protocol for IPv6. First (OSPF) Routing Protocol for IPv6, otherwise known as OSPF
version 3 (OSPFv3).
Please send comments to ospf@ietf.org. Please send comments to ospf@ietf.org.
Table of Contents Table of Contents
1. The Internet-Standard Management Framework.....................2 1. The Internet-Standard Management Framework.....................3
2. Overview.......................................................2 2. Overview.......................................................3
2.1 IPv6 Interfaces..............................................3 2.1. IPv6 Interfaces..............................................3
2.2 Addressing Semantics.........................................4 2.2. Addressing Semantics.........................................3
2.3 Authentication...............................................4 2.3. Authentication...............................................4
2.4 Type of Service..............................................4 2.4. Type of Service..............................................4
2.5 Flooding Scope...............................................4 2.5. Flooding Scope...............................................4
2.6 Virtual Links................................................4 2.6. Virtual Links................................................4
2.7 Neighbors....................................................5 2.7. Neighbors....................................................4
2.8 Conventions..................................................5 2.8. OSPFv3 Counters..............................................4
3. Structure of the OSPFv3 MIB....................................5 2.9. Multiple OSPFv3 Instances....................................5
3.1 General Variables............................................5 2.10. Conventions.................................................5
3.2 Area Table...................................................5 3. OSPFv3 Notification Overview...................................5
3.3 Area-Scope, Link-Scope and AS-Scope Link State Database......5 3.1. Introduction.................................................5
3.4 Host Table...................................................5 3.2. Ignoring Initial Activity....................................5
3.5 Interface Table..............................................5 3.3. Throttling Notifications.....................................6
3.6 Virtual Interface Table......................................6 3.4. One Notification Per OSPFv3 Event............................6
3.7 Neighbor, Configured Neighbor and Virtual Neighbor 3.5. Polling Event Counters.......................................6
Tables.......................................................6 4. Structure of the OSPFv3 MIB....................................7
3.8 Aggregate Range Table........................................6 4.1. General Variables............................................7
4. Definitions....................................................6 4.2. Area Table...................................................7
5. Security Considerations.......................................65 4.3. Area-Scope, Link-Scope and AS-Scope Link State Database......7
6. IANA Considerations...........................................65 4.4. Host Table...................................................7
7. Acknowledgements..............................................66 4.5. Interface Table..............................................7
8. Normative References..........................................66 4.6. Virtual Interface Table......................................7
9. Informative References........................................67 4.7. Neighbor, Configured Neighbor and Virtual Neighbor Tables....7
10.Contributors' Addresses.......................................67 4.8. Area Aggregate Table.........................................7
11.Authors' Addresses............................................67 4.9. Notifications................................................8
12.Differences from RFC 1850.....................................68 5. Definitions....................................................8
13.Full Copyright Statement......................................73 6. Security Considerations.......................................74
14.Intellectual Property.........................................73 7. IANA Considerations...........................................74
8. Acknowledgements..............................................75
9. Normative References..........................................75
10. Informative References.......................................76
11. Contributors' Addresses......................................76
12. Authors' Addresses...........................................76
13. Full Copyright Statement.....................................77
14. Intellectual Property........................................77
1. The Internet-Standard Management Framework 1. The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to section 7 of Internet-Standard Management Framework, please refer to section 7 of
RFC 3410 [RFC3410]. RFC 3410 [RFC3410].
Managed objects are accessed via a virtual information store, termed Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. MIB objects are generally the Management Information Base or MIB. MIB objects are generally
accessed through the Simple Network Management Protocol (SNMP). accessed through the Simple Network Management Protocol (SNMP).
skipping to change at page 3, line 13 skipping to change at page 3, line 41
fundamental mechanisms of OSPF version 2 (OSPFv2) [RFC2328] remain fundamental mechanisms of OSPF version 2 (OSPFv2) [RFC2328] remain
unchanged in OSPFv3, some changes were necessary due to differences unchanged in OSPFv3, some changes were necessary due to differences
in IP address size and in protocol semantics between IPv4 and IPv6. in IP address size and in protocol semantics between IPv4 and IPv6.
In many cases, where the protocol operations have not changed from In many cases, where the protocol operations have not changed from
OSPFv2, the specification for OSPFv3 does not restate the details, OSPFv2, the specification for OSPFv3 does not restate the details,
but instead refers to the relevant sections in the OSPFv2 but instead refers to the relevant sections in the OSPFv2
specification. This MIB follows along the same lines and includes specification. This MIB follows along the same lines and includes
Reference clauses referring to the OSPFv2 specification when Reference clauses referring to the OSPFv2 specification when
applicable. applicable.
An attempt was made to align the OSPFv3 MIB as closely as possible
with the OSPFv2 MIB. The following subsections highlight the major
differences between the OSPFv2 MIB [RFC1850] and the OSPFv3 MIB. A
detailed list of differences can be found in Appendix A.
2.1. IPv6 Interfaces 2.1. IPv6 Interfaces
IPv6 interfaces attach to links [RFC2460]. A link is roughly defined IPv6 interfaces attach to links [RFC2460]. A link is roughly defined
as the layer below IPv6 (e.g. Ethernet, IPv4 Tunnel). One or more as the layer below IPv6 (e.g. Ethernet, IPv4 Tunnel). One or more
IPv6 prefixes can be associated with an IPv6 interface. IPv6 IPv6 prefixes can be associated with an IPv6 interface. IPv6
interfaces and the prefixes associated with those interfaces can be interfaces and the prefixes associated with those interfaces can be
configured via the IPV6-MIB [RFC2465]. IPv6 interfaces are configured configured via the IP-MIB [RFC4293]. IPv6 interfaces are configured
in the IPv6 Interface Table and IPv6 prefixes are configured in the in the IPv6 Interface Table and IPv6 prefixes are configured in the
IPv6 Address Prefix Table. An IPv6 interface is identified by a Internet Address Prefix Table. An IPv6 interface is identified by a
unique index value. IPv6 Address Prefix Table entries associated with unique index value. IPv6 Address Prefix Table entries associated with
an IPv6 interface reference the interface's index. an IPv6 interface reference the interface's index.
Whereas an interface identifier in OSPFv2 is a local IPv4 address or Whereas an interface identifier in OSPFv2 is a local IPv4 address or
MIB-2 interface index, an OSPFv3 interface identifier is an IPv6 MIB-2 interface index, an OSPFv3 interface identifier is an IPv6
interface index. For example, the index value of an OSPFv3 Interface interface index. For example, the index value of an OSPFv3 Interface
Table entry is the IPv6 interface index of the IPv6 interface over Table entry is the IPv6 interface index of the IPv6 interface over
which OSPFv3 is configured to operate. which OSPFv3 is configured to operate.
2.2. Addressing Semantics 2.2. Addressing Semantics
Router ID, Area ID and Link State ID remain at the OSPFv2 size of 32 Router ID, Area ID and Link State ID remain at the OSPFv2 size of 32
bits. To ensure uniqueness, a router running both IPv4 and IPv6 bits. To ensure uniqueness, a router running both IPv4 and IPv6
concurrently can continue to use a local IPv4 host address, concurrently can continue to use a local IPv4 host address,
represented as an unsigned 32-bit value, as the OSPFv3 Router ID. represented as an unsigned 32-bit value, as the OSPFv3 Router ID.
Otherwise, the Router ID must be selected using another method (e.g. Otherwise, the Router ID must be selected using another method (e.g.
administratively assigned). administratively assigned).
Router ID, Area ID and Link State ID do not have addressing semantics Router ID, Area ID and Link State ID do not have addressing semantics
in OSPFv3, so their syntax is changed to Unsigned32. The order of the in OSPFv3, so their syntax is changed to Unsigned32. The Router ID
Router ID and Link State ID index components in Link State Database index component comes before the Link State ID index component in the
Tables are reversed in OSPFv3 since the lack of addressing semantics OSPFv3 MIB because the lack of addressing semantics in Link State IDs
in Link State IDs make them less unique identifiers than the Router make them less unique identifiers than the Router ID. It is more
ID. It is more useful to do partial OID lookups extending to the useful to do partial OID lookups extending to the Router ID rather
Router ID rather than the Link State ID. than the Link State ID.
2.3. Authentication 2.3. Authentication
In OSPFv3, authentication has been removed from the protocol itself. In OSPFv3, authentication has been removed from the protocol itself.
MIB objects related to authentication are not carried forward from MIB objects related to authentication are not carried forward from
the OSPFv2 MIB. the OSPFv2 MIB.
2.4. Type of Service 2.4. Type of Service
OSPFv2 MIB objects related to Type of Service (ToS) are not carried OSPFv2 MIB objects related to Type of Service (ToS) are not carried
forward to the OSPFv3 MIB. forward to the OSPFv3 MIB.
2.5. Flooding Scope 2.5. Flooding Scope
skipping to change at page 4, line 31 skipping to change at page 4, line 53
2.6. Virtual Links 2.6. Virtual Links
Since addressing semantics have been removed from router-LSAs in Since addressing semantics have been removed from router-LSAs in
OSPFv3, Virtual Links now need to be assigned an interface ID for OSPFv3, Virtual Links now need to be assigned an interface ID for
advertisement in Hello packets and in router-LSAs. A read-only advertisement in Hello packets and in router-LSAs. A read-only
object has been added to the Virtual Interface Table entry to view object has been added to the Virtual Interface Table entry to view
the assigned interface ID. the assigned interface ID.
2.7. Neighbors 2.7. Neighbors
The OSPFv2 Neighbor Table has been split into two tables. The OSPFv3 The OSPFv3 Neighbor Table is a read-only table that contains
Neighbor Table is a read-only table and it contains information information learned from Hellos received from neighbors, including
learned from Hellos received from neighbors, including Configured configured neighbors. The OSPFv3 Configured Neighbor Table contains
neighbors. The OSPFv3 Configured Neighbor Table contains entries for entries for manually configured neighbors for use on NBMA and
manually configured neighbors and neighbors dynamically discovered by Point-to-Multipoint interface types.
lower-level protocols such as Inverse Neighbor Discovery.
2.8 Conventions 2.8. OSPFv3 Counters
This MIB defines several counters, namely:
- ospfv3OriginateNewLsas, ospfv3RxNewLsas in the
ospfv3GeneralGroup
- ospfv3AreaSpfRuns, ospfv3AreaNssaTranslatorEvents in the
ospfv3AreaTable
- ospfv3IfEvents in the ospfv3IfTable
- ospfv3VirtIfEvents in the ospfv3VirtIfTable
- ospfv3NbrEvents in the ospfv3NbrTable
- ospfv3VirtNbrEvents in the ospfv3VirtNbrTable
As a best practice, a management entity, when reading these counters,
should use the discontinuity object, ospfv3DiscontinuityTime, to
determine if an event that would invalidate the management entity
understanding of the counters has occurred. A restart of the OSPFv3
routing process is a possible example of a discontinuity event.
2.9. Multiple OSPFv3 Instances
SNMPv3 supports "Contexts" that can be used to implement MIB views on
multiple OSPFv3 instances on the same system. See [RFC3411] or its
successors for details.
2.10. Conventions
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL
NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in "OPTIONAL" in this document are to be interpreted as described in
RFC 2119 [RFC2119]. RFC 2119 [RFC2119].
3. Structure of the OSPFv3 MIB 3. OSPFv3 Notification Overview
3.1. Introduction
OSPFv3 is an event-driven routing protocol, where an event can be
a change in an OSPFv3 interface's link-level status, the
expiration of an OSPFv3 timer, or the reception of an OSPFv3
protocol packet. Many of the actions that OSPFv3 takes as a result
of these events will result in a change of the routing topology.
As routing topologies become large and complex, it is often
difficult to locate the source of a topology change or
unpredicted routing path by polling a large number or routers.
Because of the difficulty of polling a large number of devices,
a more prudent approach is for devices to notify a network manager
of potentially critical OSPF events using SNMP notifications.
3.2 Ignoring Initial Activity
The majority of critical events occur when OSPFv3 is enabled on a
router, at which time the designated router is elected and
neighbor adjacencies are formed. During this initial period, a
potential flood of notifications is unnecessary since the
events are expected. To avoid unnecessary notifications, a
router should not originate expected OSPFv3 interface-related
notifications until two of that interface's dead timer intervals
have elapsed. The expected OSPFv3 interface notifications are
ospfv3IfStateChange, ospfv3VirtIfStateChange,
ospfv3NbrStateChange, and ospfv3VirtNbrStateChange.
3.3 Throttling Notifications
The mechanism for throttling the notifications is similar to
the mechanism explained in RFC 1224 [RFC1224]. The basic premise
of the throttling mechanism is that of a sliding window, defined
in seconds and an upper bound on the number of notifications that
may be generated within this window. Note that unlike RFC 1224,
notifications are not sent to inform the network manager that the
throttling mechanism has kicked in.
A single window should be used to throttle all OSPFv3
notifications types except for the ospfv3LsdbOverflow and the
ospfv3LsdbApproachingOverflow notifications, which should not be
throttled. For example, with a window time of 3, an upper bound
of 3, and events to cause notifications 1, 2, 3, and 4 (4
notifications within a 3-second period), the 4th notification
should not be generated.
Appropriate values are 7 notifications with a window time of
10 seconds.
3.4 One Notification Per OSPFv3 Event
Several of the notifications defined in this MIB are generated as
the result of finding an unusual condition while parsing an OSPFv3
packet or a processing a timer event. There may be more than one
unusual condition detected while handling the event. For example,
a link state update packet may contain several retransmitted link
state advertisements (LSAs), or a retransmitted database
description packet may contain several database description
entries. To limit the number of notifications and variables,
OSPFv3 should generate at most one notification per OSPFv3 event.
Only the variables associated with the first unusual
condition should be included with the notification. Similarly, if
more than one type of unusual condition is encountered while
parsing the packet, only the first event will generate a
notification.
3.5 Polling Event Counters
Many of the tables in the OSPFv3 MIB contain generalized event
counters. By enabling the notifications defined in this document,
a network manager can obtain more specific information about these
events. A network manager may want to poll these event counters
and enable OSPFv3 notifications when a particular counter starts
increasing abnormally.
4. Structure of the OSPFv3 MIB
The MIB is composed of the following sections: The MIB is composed of the following sections:
General Variables General Variables
Area Table Area Table
Area-Scope Link State Database Area-Scope Link State Database
Link-Scope Link State Database Link-Scope Link State Databases (non-virtual and virtual)
AS-Scope Link State Database AS-Scope Link State Database
Host Table Host Table
Interface Table Interface Table
Virtual Interface Table Virtual Interface Table
Neighbor Table Neighbor Table
Configured Neighbor Table Configured Neighbor Table
Virtual Neighbor Table Virtual Neighbor Table
Aggregate Range Table Area Aggregate Table
Notifications
3.1. General Variables 4.1. General Variables
The General Variables are global to the OSPFv3 Process. The General Variables are global to the OSPFv3 Process.
3.2. Area Table 4.2. Area Table
The Area Data Structure describes the OSPFv3 Areas that the The Area Data Structure describes the OSPFv3 Areas that the
router participates in. router participates in.
3.3. Area-Scope, Link-Scope and AS-Scope Link State Database 4.3. Area-Scope, Link-Scope and AS-Scope Link State Database
The Link State Databases are provided primarily to provide The Link State Databases are provided primarily to provide
detailed information for network debugging. detailed information for network debugging. There are separate
tables for Link-Scope LSAs received over non-virtual and virtual
interfaces.
3.4. Host Table 4.4. Host Table
The Host Table is provided to view configured Host Route The Host Table is provided to view configured Host Route
information. information.
3.5. Interface Table 4.5. Interface Table
The Interface Table describes the various IPv6 links on which The Interface Table describes the various IPv6 links on which
OSPFv3 is configured. OSPFv3 is configured.
3.6. Virtual Interface Table 4.6. Virtual Interface Table
The Virtual Interface Table describes virtual OSPFv3 links. The Virtual Interface Table describes virtual OSPFv3 links.
3.7. Neighbor, Configured Neighbor and Virtual Neighbor Tables 4.7. Neighbor, Configured Neighbor and Virtual Neighbor Tables
The Neighbor Table, the Configured Neighbor Table and the Virtual The Neighbor Table, the Configured Neighbor Table and the Virtual
Neighbor Table describe the neighbors to the OSPFv3 Process. Neighbor Table describe the neighbors to the OSPFv3 Process.
3.8. Aggregate Range Table 4.8. Area Aggregate Table
The Aggregate Range Table describes prefixes, which summarize The Area Aggregate Table describes prefixes, which summarize
routing information for export outside of an Area. routing information for export outside of an Area.
4. Definitions 4.9 Notifications
Notifications are defined for OSPFv3 events. Several objects are
defined specifically as variables to be used with notifications.
5. Definitions
OSPFV3-MIB DEFINITIONS ::= BEGIN OSPFV3-MIB DEFINITIONS ::= BEGIN
IMPORTS IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, mib-2, MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, mib-2,
Counter32, Gauge32, Integer32, Unsigned32 Counter32, Gauge32, Integer32, Unsigned32
FROM SNMPv2-SMI FROM SNMPv2-SMI
TEXTUAL-CONVENTION, TruthValue, RowStatus TEXTUAL-CONVENTION, TruthValue, RowStatus, TimeStamp
FROM SNMPv2-TC FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF FROM SNMPv2-CONF
InterfaceIndex InterfaceIndex
FROM IF-MIB FROM IF-MIB
InetAddressType, InetAddress, InetAddressPrefixLength InetAddressType, InetAddress, InetAddressPrefixLength
FROM INET-ADDRESS-MIB FROM INET-ADDRESS-MIB
Metric, BigMetric, Status, Metric, BigMetric, Status,
HelloRange, DesignatedRouterPriority HelloRange, DesignatedRouterPriority
FROM OSPF-MIB; FROM OSPF-MIB;
ospfv3MIB MODULE-IDENTITY ospfv3MIB MODULE-IDENTITY
LAST-UPDATED "200608091200Z" LAST-UPDATED "200709171200Z"
ORGANIZATION "IETF OSPF Working Group" ORGANIZATION "IETF OSPF Working Group"
CONTACT-INFO CONTACT-INFO
"WG E-Mail: ospf@ietf.org "WG E-Mail: ospf@ietf.org
WG Chairs: acee@cisco.com WG Chairs: Acee Lindem
dube.rohit@gmail.com acee@redback.com
Dan Joyal Abhay Roy
akr@cisco.com
Editors: Dan Joyal
Nortel Nortel
600 Technology Park Drive 600 Technology Park Drive
Billerica, MA 01821, USA Billerica, MA 01821, USA
djoyal@nortel.com djoyal@nortel.com
Vishwas Manral Vishwas Manral
IP Infusion IP Infusion
Bangalore Bangalore
India India
vishwas@ipinfusion.com" vishwas@ipinfusion.com"
DESCRIPTION DESCRIPTION
"The MIB module for OSPF version 3. "The MIB module for OSPF version 3.
Copyright (C) The Internet Society (2006). Copyright (C) The IETF Trust (2007).
This version of this MIB module is part of This version of this MIB module is part of
RFC XXXX; see the RFC itself for full legal RFC XXXX; see the RFC itself for full legal
notices." notices."
REVISION "200608091200Z" REVISION "200709171200Z"
DESCRIPTION -- RFC Editor assigns RFC xxxx DESCRIPTION -- RFC Editor assigns RFC xxxx
"Initial version, published as RFC xxxx" "Initial version, published as RFC xxxx"
::= { mib-2 XXX } -- to be assigned by IANA ::= { mib-2 XXX } -- to be assigned by IANA
-- Texual conventions -- Texual conventions
Ospfv3UpToRefreshIntervalTc ::= TEXTUAL-CONVENTION Ospfv3UpToRefreshIntervalTc ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d" DISPLAY-HINT "d-0"
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The values one might be able to configure for "The values one might be able to configure for
variables bounded by the Refresh Interval" variables bounded by the Refresh Interval"
SYNTAX Integer32 (1..1800) SYNTAX Integer32 (1..1800)
Ospfv3DeadIntRangeTc ::= TEXTUAL-CONVENTION Ospfv3DeadIntRangeTc ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d" DISPLAY-HINT "d-0"
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The range, in seconds, of dead interval value." "The range, in seconds, of dead interval value."
SYNTAX Integer32 (1..'FFFF'h) SYNTAX Integer32 (1..'FFFF'h)
Ospfv3RouterIdTc ::= TEXTUAL-CONVENTION Ospfv3RouterIdTc ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d" DISPLAY-HINT "d-0"
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A 32-bit, unsigned integer uniquely identifying the "A 32-bit, unsigned integer uniquely identifying the
router in the Autonomous System. To ensure uniqueness, router in the Autonomous System. To ensure
this may default to the value of one of the router's uniqueness, this may default to the value of one of
IPv4 host addresses if IPv4 is configured on the the router's IPv4 host addresses if IPv4 is
router." configured on the router."
SYNTAX Unsigned32 (1..'FFFFFFFF'h) SYNTAX Unsigned32 (1..'FFFFFFFF'h)
Ospfv3AreaIdTc ::= TEXTUAL-CONVENTION Ospfv3AreaIdTc ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d" DISPLAY-HINT "d-0"
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An OSPFv3 Area Identifier" "An OSPFv3 Area Identifier"
SYNTAX Unsigned32 (0..'FFFFFFFF'h) SYNTAX Unsigned32 (0..'FFFFFFFF'h)
Ospfv3IfInstIdTc ::= TEXTUAL-CONVENTION Ospfv3IfInstIdTc ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d" DISPLAY-HINT "d-0"
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An OSPFv3 interface instance ID" "An OSPFv3 interface instance ID"
SYNTAX Integer32 (0..255) SYNTAX Integer32 (0..255)
-- Top-level structure of MIB -- Top-level structure of MIB
ospfv3Notifications OBJECT IDENTIFIER ::= { ospfv3MIB 0 } ospfv3Notifications OBJECT IDENTIFIER ::= { ospfv3MIB 0 }
ospfv3Objects OBJECT IDENTIFIER ::= { ospfv3MIB 1 } ospfv3Objects OBJECT IDENTIFIER ::= { ospfv3MIB 1 }
ospfv3Conformance OBJECT IDENTIFIER ::= { ospfv3MIB 2 } ospfv3Conformance OBJECT IDENTIFIER ::= { ospfv3MIB 2 }
skipping to change at page 8, line 7 skipping to change at page 10, line 32
ospfv3GeneralGroup OBJECT IDENTIFIER ::= { ospfv3Objects 1 } ospfv3GeneralGroup OBJECT IDENTIFIER ::= { ospfv3Objects 1 }
ospfv3RouterId OBJECT-TYPE ospfv3RouterId OBJECT-TYPE
SYNTAX Ospfv3RouterIdTc SYNTAX Ospfv3RouterIdTc
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A 32-bit integer uniquely identifying the "A 32-bit integer uniquely identifying the
router in the Autonomous System. To ensure router in the Autonomous System. To ensure
uniqueness, this may default to the value of uniqueness, this may default to the 32-bit
one of the router's IPv4 host addresses, unsigned integer representation of one of
represented as a 32-bit unsigned integer, the router's IPv4 host addresses (if IPv4
if IPv4 is configured on the router." is configured on the router).
This object is persistent and when written the
entity SHOULD save the change to non-volatile
storage."
::= { ospfv3GeneralGroup 1 } ::= { ospfv3GeneralGroup 1 }
ospfv3AdminStat OBJECT-TYPE ospfv3AdminStat OBJECT-TYPE
SYNTAX Status SYNTAX Status
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The administrative status of OSPFv3 in the "The administrative status of OSPFv3 in the
router. The value 'enabled' denotes that the router. The value 'enabled' denotes that the
OSPFv3 Process is active on at least one OSPFv3 Process is active on at least one
interface; 'disabled' disables it on all interface; 'disabled' disables it on all
interfaces." interfaces.
This object is persistent and when written the
entity SHOULD save the change to non-volatile
storage."
::= { ospfv3GeneralGroup 2 } ::= { ospfv3GeneralGroup 2 }
ospfv3VersionNumber OBJECT-TYPE ospfv3VersionNumber OBJECT-TYPE
SYNTAX INTEGER { version3 (3) } SYNTAX INTEGER { version3 (3) }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The version number of OSPF for IPv6 is 3." "The version number of OSPF for IPv6 is 3."
::= { ospfv3GeneralGroup 3 } ::= { ospfv3GeneralGroup 3 }
skipping to change at page 8, line 51 skipping to change at page 11, line 32
"OSPF Version 2, Section 3 Splitting the AS into "OSPF Version 2, Section 3 Splitting the AS into
Areas" Areas"
::= { ospfv3GeneralGroup 4 } ::= { ospfv3GeneralGroup 4 }
ospfv3ASBdrRtrStatus OBJECT-TYPE ospfv3ASBdrRtrStatus OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A flag to note whether this router is "A flag to note whether this router is
configured as an Autonomous System border router." configured as an Autonomous System border router.
This object is persistent and when written the
entity SHOULD save the change to non-volatile
storage."
REFERENCE REFERENCE
"OSPF Version 2, Section 3.3 Classification of "OSPF Version 2, Section 3.3 Classification of
routers" routers"
::= { ospfv3GeneralGroup 5 } ::= { ospfv3GeneralGroup 5 }
ospfv3AsScopeLsaCount OBJECT-TYPE ospfv3AsScopeLsaCount OBJECT-TYPE
SYNTAX Gauge32 SYNTAX Gauge32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of AS-Scope (e.g. AS-External) link state "The number of AS-Scope (e.g. AS-External) link state
advertisements in the link state database." advertisements in the link state database."
::= { ospfv3GeneralGroup 6 } ::= { ospfv3GeneralGroup 6 }
ospfv3AsScopeLsaCksumSum OBJECT-TYPE ospfv3AsScopeLsaCksumSum OBJECT-TYPE
skipping to change at page 9, line 22 skipping to change at page 12, line 7
ospfv3AsScopeLsaCksumSum OBJECT-TYPE ospfv3AsScopeLsaCksumSum OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The 32-bit unsigned sum of the LS checksums of "The 32-bit unsigned sum of the LS checksums of
the AS-scoped link state advertisements the AS-scoped link state advertisements
contained in the link state database. This sum contained in the link state database. This sum
can be used to determine if there has been a can be used to determine if there has been a
change in a router's link state database, and change in a router's link state database or
to compare the link state database of two to compare the link state database of two
routers." routers."
::= { ospfv3GeneralGroup 7 } ::= { ospfv3GeneralGroup 7 }
ospfv3OriginateNewLsas OBJECT-TYPE ospfv3OriginateNewLsas OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of new link-state advertisements "The number of new link-state advertisements
that have been originated. This number is that have been originated. This number is
incremented each time the router originates a new incremented each time the router originates a new
LSA." LSA.
Discontinuities in the value of this counter
can occur at re-initialization of the management
system and at other times as indicated by the
value of ospfv3DiscontinuityTime."
::= { ospfv3GeneralGroup 8 } ::= { ospfv3GeneralGroup 8 }
ospfv3RxNewLsas OBJECT-TYPE ospfv3RxNewLsas OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of link state advertisements "The number of link state advertisements
received determined to be new instantiations. received determined to be new instantiations.
This number does not include newer This number does not include newer
instantiations of self-originated link state instantiations of self-originated link state
advertisements." advertisements.
Discontinuities in the value of this counter
can occur at re-initialization of the management
system and at other times as indicated by the
value of ospfv3DiscontinuityTime."
::= { ospfv3GeneralGroup 9 } ::= { ospfv3GeneralGroup 9 }
ospfv3ExtLsaCount OBJECT-TYPE ospfv3ExtLsaCount OBJECT-TYPE
SYNTAX Gauge32 SYNTAX Gauge32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of External(LS type 0x4005) in the "The number of External(LS type 0x4005) in the
link state database" link state database"
::= { ospfv3GeneralGroup 10 } ::= { ospfv3GeneralGroup 10 }
skipping to change at page 10, line 21 skipping to change at page 13, line 17
"The maximum number of non-default "The maximum number of non-default
AS-external-LSAs entries that can be stored in the AS-external-LSAs entries that can be stored in the
link state database. If the value is -1, then link state database. If the value is -1, then
there is no limit. there is no limit.
When the number of non-default AS-external-LSAs When the number of non-default AS-external-LSAs
in a router's link-state database reaches in a router's link-state database reaches
ospfv3ExtAreaLsdbLimit, the router enters Overflow ospfv3ExtAreaLsdbLimit, the router enters Overflow
state. The router never holds more than state. The router never holds more than
ospfv3ExtAreaLsdbLimit non-default AS-external-LSAs ospfv3ExtAreaLsdbLimit non-default AS-external-LSAs
in its database. Ospfv3ExtAreaLsdbLimit MUST be set in its database. ospfv3ExtAreaLsdbLimit MUST be set
identically in all routers attached to the OSPFv3 identically in all routers attached to the OSPFv3
backbone and/or any regular OSPFv3 area. (i.e., backbone and/or any regular OSPFv3 area. (i.e.,
OSPFv3 stub areas and NSSAs are excluded)." OSPFv3 stub areas and NSSAs are excluded).
::= { ospfv3GeneralGroup 11 }
ospfv3MulticastExtensions OBJECT-TYPE
SYNTAX BITS {
intraAreaMulticast(0),
interAreaMulticast(1),
interAsMulticast(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Bit Mask indicating whether the router is
forwarding IPv6 multicast datagrams based on
the algorithms defined in the Multicast
Extensions to OSPF.
If intraAreaMulticast set, indicates that the router
can forward IPv6 multicast datagrams in the router's
directly attached areas (called intra-area
multicast routing).
If interAreaMulticast set, indicates that the router
can forward IPv6 multicast datagrams between OSPFv3
areas (called inter-area multicast routing).
If interAsMulticast set, indicates that the router can
forward IPv6 multicast datagrams between
Autonomous Systems (called inter-AS multicast
routing).
Only certain combinations of bit settings are This object is persistent and when written the
allowed, namely: entity SHOULD save the change to non-volatile
- All bits cleared (no multicasting) storage."
- intraAreaMulticast only, ::= { ospfv3GeneralGroup 11 }
- intraAreaMulticast and interAreaMulticast,
- intraAreaMulticast and interAsMulticast
- intraAreaMulticast, interAreaMulticast and
interAsMulticast
By default, all bits are cleared."
::= { ospfv3GeneralGroup 12 }
ospfv3ExitOverflowInterval OBJECT-TYPE ospfv3ExitOverflowInterval OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of seconds that, after entering "The number of seconds that, after entering
Overflow State, a router will attempt to leave Overflow State, a router will attempt to leave
Overflow State. This allows the router to again Overflow State. This allows the router to again
originate non-default, AS-External-LSAs. When originate non-default, AS-External-LSAs. When
set to 0, the router will not leave Overflow set to 0, the router will not leave Overflow
State until restarted." State until restarted.
::= { ospfv3GeneralGroup 13 }
This object is persistent and when written the
entity SHOULD save the change to non-volatile
storage."
::= { ospfv3GeneralGroup 12 }
ospfv3DemandExtensions OBJECT-TYPE ospfv3DemandExtensions OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The router's support for demand routing." "The router's support for demand circuits.
This object is persistent and when written the
entity SHOULD save the change to non-volatile
storage."
REFERENCE REFERENCE
"OSPF Version 2, Appendix on Demand Routing" "OSPF Version 2, Appendix on Demand Circuits"
::= { ospfv3GeneralGroup 14 } ::= { ospfv3GeneralGroup 13 }
ospfv3ReferenceBandwidth OBJECT-TYPE ospfv3ReferenceBandwidth OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Reference bandwidth in kilobits/second for "Reference bandwidth in kilobits/second for
calculating default interface metrics. The calculating default interface metrics. The
default value is 100,000 KBPS (100 MBPS)" default value is 100,000 KBPS (100 MBPS)
::= { ospfv3GeneralGroup 15 }
This object is persistent and when written the
entity SHOULD save the change to non-volatile
storage."
::= { ospfv3GeneralGroup 14 }
ospfv3RestartSupport OBJECT-TYPE ospfv3RestartSupport OBJECT-TYPE
SYNTAX INTEGER { none (1), SYNTAX INTEGER { none (1),
plannedOnly (2), plannedOnly (2),
plannedAndUnplanned (3) plannedAndUnplanned (3)
} }
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The router's support for OSPF Graceful restart. "The router's support for OSPF Graceful restart.
Options include: no restart support, only planned Options include: no restart support, only planned
restarts or both planned and unplanned restarts." restarts or both planned and unplanned restarts.
::= { ospfv3GeneralGroup 16 }
This object is persistent and when written the
entity SHOULD save the change to non-volatile
storage."
::= { ospfv3GeneralGroup 15 }
ospfv3RestartInterval OBJECT-TYPE ospfv3RestartInterval OBJECT-TYPE
SYNTAX Ospfv3UpToRefreshIntervalTc SYNTAX Ospfv3UpToRefreshIntervalTc
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Configured OSPF Graceful restart timeout interval." "Configured OSPF Graceful restart timeout interval.
This object is persistent and when written the
entity SHOULD save the change to non-volatile
storage."
::= { ospfv3GeneralGroup 16 }
ospfv3RestartStrictLsaChecking OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates if strict LSA checking is enabled for
graceful restart.
This object is persistent and when written
the entity SHOULD save the change to non-volatile
storage."
::= { ospfv3GeneralGroup 17 } ::= { ospfv3GeneralGroup 17 }
ospfv3RestartStatus OBJECT-TYPE ospfv3RestartStatus OBJECT-TYPE
SYNTAX INTEGER { notRestarting (1), SYNTAX INTEGER { notRestarting (1),
plannedRestart (2), plannedRestart (2),
unplannedRestart (3) unplannedRestart (3)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at page 13, line 17 skipping to change at page 16, line 10
ospfv3NotificationEnable OBJECT-TYPE ospfv3NotificationEnable OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"If this object is set to true(1), then it enables "If this object is set to true(1), then it enables
the generation of OSPFv3 Notifications. If it is the generation of OSPFv3 Notifications. If it is
set to false(2), these notifications are not set to false(2), these notifications are not
generated. generated.
Configured values MUST survive an agent reboot." This object is persistent and when written the
entity SHOULD save the change to non-volatile
storage."
DEFVAL { true } DEFVAL { true }
::= { ospfv3GeneralGroup 21 } ::= { ospfv3GeneralGroup 21 }
ospfv3StubRouterSupport OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The router's support for stub router functionality."
REFERENCE
"OSPF Stub Router Advertisement"
::= { ospfv3GeneralGroup 22 }
ospfv3StubRouterAdvertisement OBJECT-TYPE
SYNTAX INTEGER {
doNotAdvertise (1),
advertise(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls the advertisement of
stub LSAs by the router. The value
doNotAdvertise will result in the advertisement
of standard LSAs and is the default value.
This object is persistent and when written
the entity SHOULD save the change to non-volatile
storage."
::= { ospfv3GeneralGroup 23 }
ospfv3DiscontinuityTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime on the most recent occasion
at which any one of this MIB's counters suffered
a discontinuity.
If no such discontinuities have occurred since the last
reinitialization of the local management subsystem,
then this object contains a zero value."
::= { ospfv3GeneralGroup 24 }
-- The OSPFv3 Area Data Structure contains information -- The OSPFv3 Area Data Structure contains information
-- regarding the various areas. The interfaces and -- regarding the various areas. The interfaces and
-- virtual links are configured as part of these areas. -- virtual links are configured as part of these areas.
-- Area 0, by definition, is the Backbone Area -- Area 0, by definition, is the Backbone Area
ospfv3AreaTable OBJECT-TYPE ospfv3AreaTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3AreaEntry SYNTAX SEQUENCE OF Ospfv3AreaEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Information describing the configured "Information describing the configured
parameters and cumulative statistics of the router's parameters and cumulative statistics of the router's
attached areas." attached areas. The interfaces and
virtual links are configured as part of these areas.
Area 0, by definition, is the Backbone Area."
REFERENCE REFERENCE
"OSPF Version 2, Section 6 The Area Data "OSPF Version 2, Section 6, The Area Data
Structure" Structure"
::= { ospfv3Objects 2 } ::= { ospfv3Objects 2 }
ospfv3AreaEntry OBJECT-TYPE ospfv3AreaEntry OBJECT-TYPE
SYNTAX Ospfv3AreaEntry SYNTAX Ospfv3AreaEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Information describing the configured "Information describing the configured
parameters and cumulative statistics of one of the parameters and cumulative statistics of one of the
router's attached areas." router's attached areas.
The information in this table is persistent
and when written the entity SHOULD save the
change to non-volatile storage."
INDEX { ospfv3AreaId } INDEX { ospfv3AreaId }
::= { ospfv3AreaTable 1 } ::= { ospfv3AreaTable 1 }
Ospfv3AreaEntry ::= SEQUENCE { Ospfv3AreaEntry ::= SEQUENCE {
ospfv3AreaId ospfv3AreaId
Ospfv3AreaIdTc, Ospfv3AreaIdTc,
ospfv3ImportAsExtern ospfv3AreaImportAsExtern
INTEGER, INTEGER,
ospfv3AreaSpfRuns ospfv3AreaSpfRuns
Counter32, Counter32,
ospfv3AreaBdrRtrCount ospfv3AreaBdrRtrCount
Gauge32, Gauge32,
ospfv3AreaAsBdrRtrCount ospfv3AreaAsBdrRtrCount
Gauge32, Gauge32,
ospfv3AreaScopeLsaCount ospfv3AreaScopeLsaCount
Gauge32, Gauge32,
ospfv3AreaScopeLsaCksumSum ospfv3AreaScopeLsaCksumSum
Integer32, Integer32,
ospfv3AreaSummary ospfv3AreaSummary
INTEGER, INTEGER,
ospfv3AreaStatus ospfv3AreaStatus
RowStatus, RowStatus,
ospfv3StubMetric ospfv3AreaStubMetric
BigMetric, BigMetric,
ospfv3AreaNssaTranslatorRole ospfv3AreaNssaTranslatorRole
INTEGER, INTEGER,
ospfv3AreaNssaTranslatorState ospfv3AreaNssaTranslatorState
INTEGER, INTEGER,
ospfv3AreaNssaTranslatorStabInt ospfv3AreaNssaTranslatorStabInt
Unsigned32, Unsigned32,
ospfv3AreaNssaTranslatorEvents ospfv3AreaNssaTranslatorEvents
Counter32, Counter32,
ospfv3AreaStubMetricType ospfv3AreaStubMetricType
skipping to change at page 14, line 43 skipping to change at page 18, line 32
SYNTAX Ospfv3AreaIdTc SYNTAX Ospfv3AreaIdTc
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A 32-bit integer uniquely identifying an area. "A 32-bit integer uniquely identifying an area.
Area ID 0 is used for the OSPFv3 backbone." Area ID 0 is used for the OSPFv3 backbone."
REFERENCE REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters" "OSPF Version 2, Appendix C.2 Area parameters"
::= { ospfv3AreaEntry 1 } ::= { ospfv3AreaEntry 1 }
ospfv3ImportAsExtern OBJECT-TYPE ospfv3AreaImportAsExtern OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
importExternal(1), -- normal area importExternal(1), -- normal area
importNoExternal(2), -- stub area importNoExternal(2), -- stub area
importNssa(3) -- not-so-stubby-area importNssa(3) -- not-so-stubby-area
} }
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates whether an area is a Stub area, NSSA, or "Indicates whether an area is a Stub area, NSSA, or
standard area. AS-scope LSAs are not imported into Stub standard area. AS-scope LSAs are not imported into Stub
Areas or NSSAs. NSSAs import AS-External data as NSSA Areas or NSSAs. NSSAs import AS-External data as NSSA
LSAs which have Area-scope" LSAs which have Area-scope."
REFERENCE REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters" "OSPF Version 2, Appendix C.2 Area parameters"
DEFVAL { importExternal } DEFVAL { importExternal }
::= { ospfv3AreaEntry 2 } ::= { ospfv3AreaEntry 2 }
ospfv3AreaSpfRuns OBJECT-TYPE ospfv3AreaSpfRuns OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of times that the intra-area route "The number of times that the intra-area route
table has been calculated using this area's table has been calculated using this area's
link state database. This is typically done link state database. This is typically done
using Dijkstra's algorithm." using Dijkstra's algorithm.
Discontinuities in the value of this counter
can occur at re-initialization of the management
system and at other times as indicated by the
value of ospfv3DiscontinuityTime."
::= { ospfv3AreaEntry 3 } ::= { ospfv3AreaEntry 3 }
ospfv3AreaBdrRtrCount OBJECT-TYPE ospfv3AreaBdrRtrCount OBJECT-TYPE
SYNTAX Gauge32 SYNTAX Gauge32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The total number of area border routers "The total number of area border routers
reachable within this area. This is initially zero, reachable within this area. This is initially zero,
and is calculated in each SPF Pass." and is calculated in each Shortest Path First(SPF)
pass."
::= { ospfv3AreaEntry 4 } ::= { ospfv3AreaEntry 4 }
ospfv3AreaAsBdrRtrCount OBJECT-TYPE ospfv3AreaAsBdrRtrCount OBJECT-TYPE
SYNTAX Gauge32 SYNTAX Gauge32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The total number of Autonomous System border "The total number of Autonomous System border
routers reachable within this area. This is routers reachable within this area. This is
initially zero, and is calculated in each SPF initially zero, and is calculated in each SPF
Pass." pass."
::= { ospfv3AreaEntry 5 } ::= { ospfv3AreaEntry 5 }
ospfv3AreaScopeLsaCount OBJECT-TYPE ospfv3AreaScopeLsaCount OBJECT-TYPE
SYNTAX Gauge32 SYNTAX Gauge32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The total number of Area-Scope link state "The total number of Area-Scope link state
advertisements in this area's link state advertisements in this area's link state
database." database."
skipping to change at page 16, line 6 skipping to change at page 19, line 54
ospfv3AreaScopeLsaCksumSum OBJECT-TYPE ospfv3AreaScopeLsaCksumSum OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The 32-bit unsigned sum of the Area-Scope link state "The 32-bit unsigned sum of the Area-Scope link state
advertisements' LS checksums contained in this advertisements' LS checksums contained in this
area's link state database. The sum can be used area's link state database. The sum can be used
to determine if there has been a change in a to determine if there has been a change in a
router's link state database, and to compare the router's link state database or to compare the
link-state database of two routers." link-state database of two routers."
::= { ospfv3AreaEntry 7 } ::= { ospfv3AreaEntry 7 }
ospfv3AreaSummary OBJECT-TYPE ospfv3AreaSummary OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
noAreaSummary(1), noAreaSummary(1),
sendAreaSummary(2) sendAreaSummary(2)
} }
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The variable ospfv3AreaSummary controls the "The variable ospfv3AreaSummary controls the
import of Inter-Area LSAs into stub and import of Inter-Area LSAs into stub and
skipping to change at page 16, line 24 skipping to change at page 20, line 18
} }
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The variable ospfv3AreaSummary controls the "The variable ospfv3AreaSummary controls the
import of Inter-Area LSAs into stub and import of Inter-Area LSAs into stub and
NSSA areas. It has no effect on other areas. NSSA areas. It has no effect on other areas.
If it is noAreaSummary, the router will neither If it is noAreaSummary, the router will neither
originate nor propagate Inter-Area LSAs into the originate nor propagate Inter-Area LSAs into the
stub or NSSA area. It will rely entirely on its stub or NSSA area. It will only advertise a
default route. default route.
If it is sendAreaSummary, the router will both If it is sendAreaSummary, the router will both
summarize and propagate Inter-Area LSAs." summarize and propagate Inter-Area LSAs."
DEFVAL { sendAreaSummary } DEFVAL { sendAreaSummary }
::= { ospfv3AreaEntry 8 } ::= { ospfv3AreaEntry 8 }
ospfv3AreaStatus OBJECT-TYPE ospfv3AreaStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
skipping to change at page 16, line 46 skipping to change at page 20, line 40
DESCRIPTION DESCRIPTION
"This object permits management of the table by "This object permits management of the table by
facilitating actions such as row creation, facilitating actions such as row creation,
construction and destruction. construction and destruction.
The value of this object has no effect on The value of this object has no effect on
whether other objects in this conceptual row can be whether other objects in this conceptual row can be
modified." modified."
::= { ospfv3AreaEntry 9 } ::= { ospfv3AreaEntry 9 }
ospfv3StubMetric OBJECT-TYPE ospfv3AreaStubMetric OBJECT-TYPE
SYNTAX BigMetric SYNTAX BigMetric
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The metric value advertised for the default route "The metric value advertised for the default route
into Stub and NSSA areas." into Stub and NSSA areas."
::= { ospfv3AreaEntry 10 } ::= { ospfv3AreaEntry 10 }
ospfv3AreaNssaTranslatorRole OBJECT-TYPE ospfv3AreaNssaTranslatorRole OBJECT-TYPE
SYNTAX INTEGER { always(1), candidate(2) } SYNTAX INTEGER { always(1), candidate(2) }
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates an NSSA Border router's ability to "Indicates an NSSA Border router's policy for
perform NSSA translation of NSSA-LSAs into perform NSSA translation of NSSA-LSAs into
AS-External-LSAs." AS-External-LSAs."
DEFVAL { candidate } DEFVAL { candidate }
::= { ospfv3AreaEntry 11 } ::= { ospfv3AreaEntry 11 }
ospfv3AreaNssaTranslatorState OBJECT-TYPE ospfv3AreaNssaTranslatorState OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
enabled(1), enabled(1),
elected(2), elected(2),
disabled(3) disabled(3)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates if and how an NSSA Border router is "Indicates if and how an NSSA Border router is
performing NSSA translation of NSSA-LSAs into performing NSSA translation of NSSA-LSAs into
AS-External-LSA's. When this object is set to enabled, AS-External-LSAs. When this object is set to enabled,
the NSSA Border router's ospfv3AreaNssTranslatorRole the NSSA Border router's ospfv3AreaNssaTranslatorRole
has been set to always. When this object is set to has been set to always. When this object is set to
elected, a candidate NSSA Border router is translating elected, a candidate NSSA Border router is translating
NSSA-LSA's into AS-External-LSA's. When this object is NSSA-LSAs into AS-External-LSAs. When this object is
set to disabled, a candidate NSSA Border router is NOT set to disabled, a candidate NSSA Border router is NOT
translating NSSA-LSA's into AS-External-LSA's." translating NSSA-LSAs into AS-External-LSAs."
::= { ospfv3AreaEntry 12 } ::= { ospfv3AreaEntry 12 }
ospfv3AreaNssaTranslatorStabInt OBJECT-TYPE ospfv3AreaNssaTranslatorStabInt OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of seconds after an elected translator "The stability interval defined as the number of
determines its services are no longer required, that seconds after an elected translator determines its
it should continue to perform its translation duties." services are no longer required that it should
continue to perform its translation duties."
DEFVAL { 40 } DEFVAL { 40 }
::= { ospfv3AreaEntry 13 } ::= { ospfv3AreaEntry 13 }
ospfv3AreaNssaTranslatorEvents OBJECT-TYPE ospfv3AreaNssaTranslatorEvents OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates the number of Translator State changes "Indicates the number of Translator State changes
that have occurred since the last boot-up." that have occurred since the last start-up of the
OSPFv3 routing process.
Discontinuities in the value of this counter
can occur at re-initialization of the management
system and at other times as indicated by the
value of ospfv3DiscontinuityTime."
::= { ospfv3AreaEntry 14 } ::= { ospfv3AreaEntry 14 }
ospfv3AreaStubMetricType OBJECT-TYPE ospfv3AreaStubMetricType OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
ospfv3Metric (1), -- OSPF Metric ospfv3Metric (1), -- OSPF Metric
comparableCost (2), -- external type 1 comparableCost (2), -- external type 1
nonComparable (3) -- external type 2 nonComparable (3) -- external type 2
} }
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This variable displays the type of metric "This variable assigns the type of metric
advertised as a default route." advertised as a default route."
DEFVAL { ospfv3Metric } DEFVAL { ospfv3Metric }
::= { ospfv3AreaEntry 15 } ::= { ospfv3AreaEntry 15 }
-- OSPFv3 AS-Scope Link State Database -- OSPFv3 AS-Scope Link State Database
-- The Link State Database contains the AS-Scope Link State
-- Advertisements from throughout the areas that the
-- device is attached to.
ospfv3AsLsdbTable OBJECT-TYPE ospfv3AsLsdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3AsLsdbEntry SYNTAX SEQUENCE OF Ospfv3AsLsdbEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The OSPFv3 Process's AS-Scope Link State Database." "The OSPFv3 Process's AS-Scope Link State Database
(LSDB). The LSDB contains the AS-Scope Link State
Advertisements from throughout the areas that the
device is attached to."
::= { ospfv3Objects 3 } ::= { ospfv3Objects 3 }
ospfv3AsLsdbEntry OBJECT-TYPE ospfv3AsLsdbEntry OBJECT-TYPE
SYNTAX Ospfv3AsLsdbEntry SYNTAX Ospfv3AsLsdbEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A single AS-Scope Link State Advertisement." "A single AS-Scope Link State Advertisement."
INDEX { ospfv3AsLsdbType, INDEX { ospfv3AsLsdbType,
ospfv3AsLsdbRouterId, ospfv3AsLsdbRouterId,
skipping to change at page 21, line 4 skipping to change at page 25, line 5
::= { ospfv3AsLsdbEntry 7 } ::= { ospfv3AsLsdbEntry 7 }
ospfv3AsLsdbTypeKnown OBJECT-TYPE ospfv3AsLsdbTypeKnown OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates whether the LSA type is recognized by "Indicates whether the LSA type is recognized by
this Router." this Router."
::= { ospfv3AsLsdbEntry 8 } ::= { ospfv3AsLsdbEntry 8 }
-- OSPFv3 Area-Scope Link State Database
-- The Link State Database contains the Area-Scope Link State -- OSPFv3 Area-Scope Link State Database
-- Advertisements from throughout the area that the
-- device is attached to.
ospfv3AreaLsdbTable OBJECT-TYPE ospfv3AreaLsdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3AreaLsdbEntry SYNTAX SEQUENCE OF Ospfv3AreaLsdbEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The OSPFv3 Process's Area-Scope Link State Database." "The OSPFv3 Process's Area-Scope LSDB.
The LSDB contains the Area-Scope Link State
Advertisements from throughout the area that the
device is attached to."
::= { ospfv3Objects 4 } ::= { ospfv3Objects 4 }
ospfv3AreaLsdbEntry OBJECT-TYPE ospfv3AreaLsdbEntry OBJECT-TYPE
SYNTAX Ospfv3AreaLsdbEntry SYNTAX Ospfv3AreaLsdbEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A single Area-Scope Link State Advertisement." "A single Area-Scope Link State Advertisement."
INDEX { ospfv3AreaLsdbAreaId, INDEX { ospfv3AreaLsdbAreaId,
ospfv3AreaLsdbType, ospfv3AreaLsdbType,
skipping to change at page 24, line 8 skipping to change at page 28, line 10
ospfv3AreaLsdbTypeKnown OBJECT-TYPE ospfv3AreaLsdbTypeKnown OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates whether the LSA type is recognized "Indicates whether the LSA type is recognized
by this Router." by this Router."
::= { ospfv3AreaLsdbEntry 9 } ::= { ospfv3AreaLsdbEntry 9 }
-- OSPFv3 Link-Scope Link State Database -- OSPFv3 Link-Scope Link State Database, for non-virtual interfaces
-- The Link State Database contains the Link-Scope Link State
-- Advertisements from the links that the
-- device is attached to.
ospfv3LinkLsdbTable OBJECT-TYPE ospfv3LinkLsdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3LinkLsdbEntry SYNTAX SEQUENCE OF Ospfv3LinkLsdbEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The OSPFv3 Process's Link-Scope Link State Database." "The OSPFv3 Process's Link-Scope LSDB for non-virtual
interfaces. The LSDB contains the Link-Scope Link
State Advertisements from the interfaces that the
device is attached to."
::= { ospfv3Objects 5 } ::= { ospfv3Objects 5 }
ospfv3LinkLsdbEntry OBJECT-TYPE ospfv3LinkLsdbEntry OBJECT-TYPE
SYNTAX Ospfv3LinkLsdbEntry SYNTAX Ospfv3LinkLsdbEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A single Link-Scope Link State Advertisement." "A single Link-Scope Link State Advertisement."
INDEX { ospfv3LinkLsdbIfIndex, INDEX { ospfv3LinkLsdbIfIndex,
ospfv3LinkLsdbIfInstId, ospfv3LinkLsdbIfInstId,
skipping to change at page 25, line 53 skipping to change at page 30, line 4
ospfv3LinkLsdbLsid OBJECT-TYPE ospfv3LinkLsdbLsid OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Link State ID is an LS Type Specific field "The Link State ID is an LS Type Specific field
containing a unique identifier; containing a unique identifier;
it identifies the piece of the routing domain it identifies the piece of the routing domain
that is being described by the advertisement. that is being described by the advertisement.
In contrast to OSPFv2, the LSID has no In contrast to OSPFv2, the LSID has no
addressing semantics." addressing semantics. However, in OSPFv3
the Link State ID always contains the flooding
scope of the LSA."
::= { ospfv3LinkLsdbEntry 5 } ::= { ospfv3LinkLsdbEntry 5 }
-- Note that the OSPF Sequence Number is a 32 bit signed -- Note that the OSPF Sequence Number is a 32 bit signed
-- integer. It starts with the value '80000001'h, -- integer. It starts with the value '80000001'h,
-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h -- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
-- Thus, a typical sequence number will be very negative. -- Thus, a typical sequence number will be very negative.
ospfv3LinkLsdbSequence OBJECT-TYPE ospfv3LinkLsdbSequence OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at page 27, line 23 skipping to change at page 31, line 28
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates whether the LSA type is recognized by this "Indicates whether the LSA type is recognized by this
Router." Router."
::= { ospfv3LinkLsdbEntry 10 } ::= { ospfv3LinkLsdbEntry 10 }
-- OSPF Host Table -- OSPF Host Table
-- The Host/Metric Table indicates what hosts are directly
-- attached to the Router, and what metrics and types of
-- service should be advertised for them.
ospfv3HostTable OBJECT-TYPE ospfv3HostTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3HostEntry SYNTAX SEQUENCE OF Ospfv3HostEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The list of Hosts, and their metrics, that the "The Host/Metric Table indicates what hosts are
router will advertise as host routes." directly attached to the router and their
corresponding metrics."
REFERENCE REFERENCE
"OSPF Version 2, Appendix C.6 Host route "OSPF Version 2, Appendix C.6 Host route
parameters" parameters"
::= { ospfv3Objects 6 } ::= { ospfv3Objects 6 }
ospfv3HostEntry OBJECT-TYPE ospfv3HostEntry OBJECT-TYPE
SYNTAX Ospfv3HostEntry SYNTAX Ospfv3HostEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A metric to be advertised when a given host is "A metric to be advertised when a given host is
reachable." reachable.
The information in this table is persistent and
when written the entity SHOULD save the change
to non-volatile storage."
INDEX { ospfv3HostAddressType, INDEX { ospfv3HostAddressType,
ospfv3HostAddress } ospfv3HostAddress }
::= { ospfv3HostTable 1 } ::= { ospfv3HostTable 1 }
Ospfv3HostEntry ::= SEQUENCE { Ospfv3HostEntry ::= SEQUENCE {
ospfv3HostAddressType ospfv3HostAddressType
InetAddressType, InetAddressType,
ospfv3HostAddress ospfv3HostAddress
InetAddress, InetAddress,
ospfv3HostMetric ospfv3HostMetric
Metric, Metric,
ospfv3HostStatus ospfv3HostStatus
RowStatus, RowStatus,
ospfv3HostAreaID ospfv3HostAreaID
skipping to change at page 28, line 17 skipping to change at page 32, line 23
ospfv3HostAreaID ospfv3HostAreaID
Ospfv3AreaIdTc Ospfv3AreaIdTc
} }
ospfv3HostAddressType OBJECT-TYPE ospfv3HostAddressType OBJECT-TYPE
SYNTAX InetAddressType SYNTAX InetAddressType
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The address type of ospfv3HostAddress. Only IPv6 "The address type of ospfv3HostAddress. Only IPv6
addresses without zone index are expected." global address type expected."
REFERENCE REFERENCE
"OSPF Version 2, Appendix C.6 Host route "OSPF Version 2, Appendix C.6 Host route
parameters" parameters"
::= { ospfv3HostEntry 1 } ::= { ospfv3HostEntry 1 }
ospfv3HostAddress OBJECT-TYPE ospfv3HostAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (16)) SYNTAX InetAddress (SIZE (16))
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The IPv6 Address of the Host. Must be a Global "The IPv6 Address of the Host. Must be an
address." IPv6 global address."
REFERENCE REFERENCE
"OSPF Version 2, Appendix C.6 Host route "OSPF Version 2, Appendix C.6 Host route
parameters" parameters"
::= { ospfv3HostEntry 2 } ::= { ospfv3HostEntry 2 }
ospfv3HostMetric OBJECT-TYPE ospfv3HostMetric OBJECT-TYPE
SYNTAX Metric SYNTAX Metric
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at page 29, line 14 skipping to change at page 33, line 20
whether other objects in this conceptual row can be whether other objects in this conceptual row can be
modified." modified."
::= { ospfv3HostEntry 4 } ::= { ospfv3HostEntry 4 }
ospfv3HostAreaID OBJECT-TYPE ospfv3HostAreaID OBJECT-TYPE
SYNTAX Ospfv3AreaIdTc SYNTAX Ospfv3AreaIdTc
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Area the Host Entry is to be found within. "The Area the Host Entry is to be found within.
By default, the area that a subsuming OSPFv3 By default, the area for the subsuming OSPFv3
interface is in, or Area 0" interface or Area 0 if there is no subsuming
interface."
REFERENCE REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters" "OSPF Version 2, Appendix C.2 Area parameters"
::= { ospfv3HostEntry 5 } ::= { ospfv3HostEntry 5 }
-- OSPFv3 Interface Table -- OSPFv3 Interface Table
ospfv3IfTable OBJECT-TYPE ospfv3IfTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3IfEntry SYNTAX SEQUENCE OF Ospfv3IfEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
skipping to change at page 29, line 40 skipping to change at page 33, line 47
"OSPF Version 2, Appendix C.3 Router interface "OSPF Version 2, Appendix C.3 Router interface
parameters" parameters"
::= { ospfv3Objects 7 } ::= { ospfv3Objects 7 }
ospfv3IfEntry OBJECT-TYPE ospfv3IfEntry OBJECT-TYPE
SYNTAX Ospfv3IfEntry SYNTAX Ospfv3IfEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The OSPFv3 Interface Entry describes one "The OSPFv3 Interface Entry describes one
interface from the viewpoint of OSPFv3." interface from the viewpoint of OSPFv3.
The information in this table is persistent
and when written the entity SHOULD save the
change to non-volatile storage."
INDEX { ospfv3IfIndex, INDEX { ospfv3IfIndex,
ospfv3IfInstId } ospfv3IfInstId }
::= { ospfv3IfTable 1 } ::= { ospfv3IfTable 1 }
Ospfv3IfEntry ::= SEQUENCE { Ospfv3IfEntry ::= SEQUENCE {
ospfv3IfIndex ospfv3IfIndex
InterfaceIndex, InterfaceIndex,
ospfv3IfInstId ospfv3IfInstId
Ospfv3IfInstIdTc, Ospfv3IfInstIdTc,
ospfv3IfAreaId ospfv3IfAreaId
Ospfv3AreaIdTc, Ospfv3AreaIdTc,
ospfv3IfType ospfv3IfType
INTEGER, INTEGER,
ospfv3IfAdminStat ospfv3IfAdminStat
skipping to change at page 30, line 26 skipping to change at page 34, line 37
ospfv3IfState ospfv3IfState
INTEGER, INTEGER,
ospfv3IfDesignatedRouter ospfv3IfDesignatedRouter
Ospfv3RouterIdTc, Ospfv3RouterIdTc,
ospfv3IfBackupDesignatedRouter ospfv3IfBackupDesignatedRouter
Ospfv3RouterIdTc, Ospfv3RouterIdTc,
ospfv3IfEvents ospfv3IfEvents
Counter32, Counter32,
ospfv3IfStatus ospfv3IfStatus
RowStatus, RowStatus,
ospfv3IfMulticastForwarding
INTEGER,
ospfv3IfDemand ospfv3IfDemand
TruthValue, TruthValue,
ospfv3IfMetricValue ospfv3IfMetricValue
Metric, Metric,
ospfv3IfLinkScopeLsaCount ospfv3IfLinkScopeLsaCount
Gauge32, Gauge32,
ospfv3IfLinkLsaCksumSum ospfv3IfLinkLsaCksumSum
Integer32, Integer32,
ospfv3IfDemandNbrProbe ospfv3IfDemandNbrProbe
TruthValue, TruthValue,
skipping to change at page 31, line 7 skipping to change at page 35, line 17
It corresponds to the interface index of the It corresponds to the interface index of the
IPv6 interface on which OSPFv3 is configured." IPv6 interface on which OSPFv3 is configured."
::= { ospfv3IfEntry 1 } ::= { ospfv3IfEntry 1 }
ospfv3IfInstId OBJECT-TYPE ospfv3IfInstId OBJECT-TYPE
SYNTAX Ospfv3IfInstIdTc SYNTAX Ospfv3IfInstIdTc
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Enables multiple interface instances of OSPFv3 "Enables multiple interface instances of OSPFv3
to be run over a single link. Each protocol to be run over a single link. Each interface
instance would be assigned a separate ID. This ID instance would be assigned a separate ID. This ID
has local link significance only." has local link significance only."
::= { ospfv3IfEntry 2 } ::= { ospfv3IfEntry 2 }
ospfv3IfAreaId OBJECT-TYPE ospfv3IfAreaId OBJECT-TYPE
SYNTAX Ospfv3AreaIdTc SYNTAX Ospfv3AreaIdTc
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A 32-bit integer uniquely identifying the area "A 32-bit integer uniquely identifying the area
skipping to change at page 32, line 31 skipping to change at page 36, line 41
DEFVAL { 1 } DEFVAL { 1 }
::= { ospfv3IfEntry 7 } ::= { ospfv3IfEntry 7 }
ospfv3IfRetransInterval OBJECT-TYPE ospfv3IfRetransInterval OBJECT-TYPE
SYNTAX Ospfv3UpToRefreshIntervalTc SYNTAX Ospfv3UpToRefreshIntervalTc
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of seconds between link state "The number of seconds between link state
advertisement retransmissions, for adjacencies advertisement retransmissions for adjacencies
belonging to this interface. This value is belonging to this interface. This value is
also used when retransmitting database also used when retransmitting database
description and link state request packets." description and link state request packets."
DEFVAL { 5 } DEFVAL { 5 }
::= { ospfv3IfEntry 8 } ::= { ospfv3IfEntry 8 }
ospfv3IfHelloInterval OBJECT-TYPE ospfv3IfHelloInterval OBJECT-TYPE
SYNTAX HelloRange SYNTAX HelloRange
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
skipping to change at page 33, line 20 skipping to change at page 37, line 30
DEFVAL { 40 } DEFVAL { 40 }
::= { ospfv3IfEntry 10 } ::= { ospfv3IfEntry 10 }
ospfv3IfPollInterval OBJECT-TYPE ospfv3IfPollInterval OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The larger time interval, in seconds, between "The larger time interval, in seconds, between
the Hello packets sent to an inactive the Hello packets sent to an inactive,
non-broadcast multi-access neighbor." non-broadcast, multi-access neighbor."
DEFVAL { 120 } DEFVAL { 120 }
::= { ospfv3IfEntry 11 } ::= { ospfv3IfEntry 11 }
ospfv3IfState OBJECT-TYPE ospfv3IfState OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
down(1), down(1),
loopback(2), loopback(2),
waiting(3), waiting(3),
pointToPoint(4), pointToPoint(4),
designatedRouter(5), designatedRouter(5),
backupDesignatedRouter(6), backupDesignatedRouter(6),
otherDesignatedRouter(7) otherDesignatedRouter(7),
standby(8)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The OSPFv3 Interface State." "The OSPFv3 Interface State. An interface may be
in standby state if there are multiple interfaces
on the link and another interface is active."
::= { ospfv3IfEntry 12 } ::= { ospfv3IfEntry 12 }
ospfv3IfDesignatedRouter OBJECT-TYPE ospfv3IfDesignatedRouter OBJECT-TYPE
SYNTAX Ospfv3RouterIdTc SYNTAX Ospfv3RouterIdTc
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Router ID of the Designated Router." "The Router ID of the Designated Router."
::= { ospfv3IfEntry 13 } ::= { ospfv3IfEntry 13 }
skipping to change at page 34, line 4 skipping to change at page 38, line 17
::= { ospfv3IfEntry 13 } ::= { ospfv3IfEntry 13 }
ospfv3IfBackupDesignatedRouter OBJECT-TYPE ospfv3IfBackupDesignatedRouter OBJECT-TYPE
SYNTAX Ospfv3RouterIdTc SYNTAX Ospfv3RouterIdTc
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Router ID of the Backup Designated "The Router ID of the Backup Designated
Router." Router."
::= { ospfv3IfEntry 14 } ::= { ospfv3IfEntry 14 }
ospfv3IfEvents OBJECT-TYPE ospfv3IfEvents OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of times this OSPF interface has "The number of times this OSPFv3 interface has
changed its state, or an error has occurred." changed its state or an error has occurred.
Discontinuities in the value of this counter
can occur at re-initialization of the management
system and at other times as indicated by the
value of ospfv3DiscontinuityTime."
::= { ospfv3IfEntry 15 } ::= { ospfv3IfEntry 15 }
ospfv3IfStatus OBJECT-TYPE ospfv3IfStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object permits management of the table by "This object permits management of the table by
facilitating actions such as row creation, facilitating actions such as row creation,
construction and destruction. construction and destruction.
The value of this object has no effect on The value of this object has no effect on
whether other objects in this conceptual row can be whether other objects in this conceptual row can be
modified." modified."
::= { ospfv3IfEntry 16 } ::= { ospfv3IfEntry 16 }
ospfv3IfMulticastForwarding OBJECT-TYPE
SYNTAX INTEGER {
blocked(1), -- no multicast forwarding
multicast(2), -- using multicast address
unicast(3) -- to each OSPFv3 neighbor
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The way multicasts should forwarded on this
interface; not forwarded, forwarded as data
link multicasts, or forwarded as data link
unicasts. Data link multicasting is not
meaningful on point to point and NBMA interfaces,
and setting ospfv3MulticastForwarding to 0
effectively disables all multicast forwarding."
DEFVAL { blocked }
::= { ospfv3IfEntry 17 }
ospfv3IfDemand OBJECT-TYPE ospfv3IfDemand OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates whether Demand OSPFv3 procedures "Indicates whether Demand OSPFv3 procedures
(hello suppression to FULL neighbors and (hello suppression to FULL neighbors and
setting the DoNotAge flag on propagated LSAs) setting the DoNotAge flag on propagated LSAs)
should be performed on this interface." should be performed on this interface."
DEFVAL { false } DEFVAL { false }
::= { ospfv3IfEntry 18 } ::= { ospfv3IfEntry 17 }
ospfv3IfMetricValue OBJECT-TYPE ospfv3IfMetricValue OBJECT-TYPE
SYNTAX Metric SYNTAX Metric
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The metric assigned to this interface. "The metric assigned to this interface.
The default value of the Metric is The default value of the Metric is
Reference Bandwidth / ifSpeed. The value Reference Bandwidth / ifSpeed. The value
of the reference bandwidth is configured of the reference bandwidth can be set
by the ospfv3ReferenceBandwidth object." in the ospfv3ReferenceBandwidth object."
::= { ospfv3IfEntry 19 } ::= { ospfv3IfEntry 18 }
ospfv3IfLinkScopeLsaCount OBJECT-TYPE ospfv3IfLinkScopeLsaCount OBJECT-TYPE
SYNTAX Gauge32 SYNTAX Gauge32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The total number of Link-Scope link state "The total number of Link-Scope link state
advertisements in this link's link state advertisements in this link's link state
database." database."
::= { ospfv3IfEntry 20 } ::= { ospfv3IfEntry 19 }
ospfv3IfLinkLsaCksumSum OBJECT-TYPE ospfv3IfLinkLsaCksumSum OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The 32-bit unsigned sum of the Link-Scope link state "The 32-bit unsigned sum of the Link-Scope link state
advertisements' LS checksums contained in this advertisements' LS checksums contained in this
link's link state database. The sum can be used link's link state database. The sum can be used
to determine if there has been a change in a to determine if there has been a change in a
router's link state database, and to compare the router's link state database or to compare the
link state database of two routers." link state database of two routers."
::= { ospfv3IfEntry 21 } ::= { ospfv3IfEntry 20 }
ospfv3IfDemandNbrProbe OBJECT-TYPE ospfv3IfDemandNbrProbe OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates whether or not neighbor probing is "Indicates whether or not neighbor probing is
enabled to determine whether or not the neighbor enabled to determine whether or not the neighbor
is inactive. Neighbor probing is disabled by is inactive. Neighbor probing is disabled by
default." default."
DEFVAL { false } DEFVAL { false }
::= { ospfv3IfEntry 22 } ::= { ospfv3IfEntry 21 }
ospfv3IfDemandNbrProbeRetxLimit OBJECT-TYPE ospfv3IfDemandNbrProbeRetxLimit OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of consecutive LSA retransmissions before "The number of consecutive LSA retransmissions before
the neighbor is deemed inactive and the neighbor the neighbor is deemed inactive and the neighbor
adjacency is brought down." adjacency is brought down."
DEFVAL { 10 } DEFVAL { 10 }
::= { ospfv3IfEntry 23} ::= { ospfv3IfEntry 22}
ospfv3IfDemandNbrProbeInterval OBJECT-TYPE ospfv3IfDemandNbrProbeInterval OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Defines how often the neighbor will be probed." "Defines how often the neighbor will be probed."
DEFVAL { 120 } DEFVAL { 120 }
::= { ospfv3IfEntry 24 } ::= { ospfv3IfEntry 23 }
-- OSPFv3 Virtual Interface Table -- OSPFv3 Virtual Interface Table
-- The Virtual Interface Table describes the virtual
-- links that the OSPFv3 Process is configured to
-- carry on.
ospfv3VirtIfTable OBJECT-TYPE ospfv3VirtIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3VirtIfEntry SYNTAX SEQUENCE OF Ospfv3VirtIfEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Information about this router's virtual "Information about this router's virtual
interfaces." interfaces that the OSPFv3 Process is configured
to carry on."
REFERENCE REFERENCE
"OSPF Version 2, Appendix C.4 Virtual link "OSPF Version 2, Appendix C.4 Virtual link
parameters" parameters"
::= { ospfv3Objects 8 } ::= { ospfv3Objects 8 }
ospfv3VirtIfEntry OBJECT-TYPE ospfv3VirtIfEntry OBJECT-TYPE
SYNTAX Ospfv3VirtIfEntry SYNTAX Ospfv3VirtIfEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Information about a single Virtual Interface." "Information about a single Virtual Interface.
The information in this table is persistent
and when written the entity SHOULD save the
change to non-volatile storage."
INDEX { ospfv3VirtIfAreaId, INDEX { ospfv3VirtIfAreaId,
ospfv3VirtIfNeighbor } ospfv3VirtIfNeighbor }
::= { ospfv3VirtIfTable 1 } ::= { ospfv3VirtIfTable 1 }
Ospfv3VirtIfEntry ::= SEQUENCE { Ospfv3VirtIfEntry ::= SEQUENCE {
ospfv3VirtIfAreaId ospfv3VirtIfAreaId
Ospfv3AreaIdTc, Ospfv3AreaIdTc,
ospfv3VirtIfNeighbor ospfv3VirtIfNeighbor
Ospfv3RouterIdTc, Ospfv3RouterIdTc,
ospfv3VirtIfIndex ospfv3VirtIfIndex
skipping to change at page 37, line 35 skipping to change at page 41, line 35
Integer32 Integer32
} }
ospfv3VirtIfAreaId OBJECT-TYPE ospfv3VirtIfAreaId OBJECT-TYPE
SYNTAX Ospfv3AreaIdTc SYNTAX Ospfv3AreaIdTc
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Transit Area that the Virtual Link "The Transit Area that the Virtual Link
traverses. By definition, this is not traverses. By definition, this is not
Area 0" Area 0."
::= { ospfv3VirtIfEntry 1 } ::= { ospfv3VirtIfEntry 1 }
ospfv3VirtIfNeighbor OBJECT-TYPE ospfv3VirtIfNeighbor OBJECT-TYPE
SYNTAX Ospfv3RouterIdTc SYNTAX Ospfv3RouterIdTc
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Router ID of the Virtual Neighbor." "The Router ID of the Virtual Neighbor."
::= { ospfv3VirtIfEntry 2 } ::= { ospfv3VirtIfEntry 2 }
ospfv3VirtIfIndex OBJECT-TYPE ospfv3VirtIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex SYNTAX InterfaceIndex
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The local interface index assigned to this "The local interface index assigned by the
OSPFv3 virtual interface. It is advertised in OSPFv3 process to this OSPFv3 virtual interface.
Hello's sent over the virtal link and in the It is advertised in Hello's sent over the virtual
router's router-LSAs." link and in the router's router-LSAs."
::= { ospfv3VirtIfEntry 3 } ::= { ospfv3VirtIfEntry 3 }
ospfv3VirtIfInstId OBJECT-TYPE ospfv3VirtIfInstId OBJECT-TYPE
SYNTAX Ospfv3IfInstIdTc SYNTAX Ospfv3IfInstIdTc
MAX-ACCESS read-create MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the interface instance ID to be used "The local interface instance ID assigned by the
for the virtual interface. This ID has local link OSPFv3 process to this OSPFv3 virtual interface."
significance only."
DEFVAL { 0 }
::= { ospfv3VirtIfEntry 4 } ::= { ospfv3VirtIfEntry 4 }
ospfv3VirtIfTransitDelay OBJECT-TYPE ospfv3VirtIfTransitDelay OBJECT-TYPE
SYNTAX Ospfv3UpToRefreshIntervalTc SYNTAX Ospfv3UpToRefreshIntervalTc
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The estimated number of seconds it takes to "The estimated number of seconds it takes to
transmit a link state update packet over this transmit a link state update packet over this
skipping to change at page 38, line 34 skipping to change at page 42, line 32
DEFVAL { 1 } DEFVAL { 1 }
::= { ospfv3VirtIfEntry 5 } ::= { ospfv3VirtIfEntry 5 }
ospfv3VirtIfRetransInterval OBJECT-TYPE ospfv3VirtIfRetransInterval OBJECT-TYPE
SYNTAX Ospfv3UpToRefreshIntervalTc SYNTAX Ospfv3UpToRefreshIntervalTc
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of seconds between link state "The number of seconds between link state
advertisement retransmissions, for adjacencies advertisement retransmissions for adjacencies
belonging to this interface. This value is belonging to this interface. This value is
also used when retransmitting database also used when retransmitting database
description and link state request packets. This description and link state request packets. This
value should be well over the expected value should be well over the expected
round-trip time." round-trip time."
DEFVAL { 5 } DEFVAL { 5 }
::= { ospfv3VirtIfEntry 6 } ::= { ospfv3VirtIfEntry 6 }
ospfv3VirtIfHelloInterval OBJECT-TYPE ospfv3VirtIfHelloInterval OBJECT-TYPE
SYNTAX HelloRange SYNTAX HelloRange
skipping to change at page 39, line 36 skipping to change at page 43, line 34
"OSPF virtual interface states. The same encoding "OSPF virtual interface states. The same encoding
as the ospfV3IfTable is used." as the ospfV3IfTable is used."
::= { ospfv3VirtIfEntry 9 } ::= { ospfv3VirtIfEntry 9 }
ospfv3VirtIfEvents OBJECT-TYPE ospfv3VirtIfEvents OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of state changes or error events on "The number of state changes or error events on
this Virtual Link" this Virtual Link.
Discontinuities in the value of this counter
can occur at re-initialization of the management
system and at other times as indicated by the
value of ospfv3DiscontinuityTime."
::= { ospfv3VirtIfEntry 10 } ::= { ospfv3VirtIfEntry 10 }
ospfv3VirtIfStatus OBJECT-TYPE ospfv3VirtIfStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object permits management of the table by "This object permits management of the table by
facilitating actions such as row creation, facilitating actions such as row creation,
construction and destruction. construction and destruction.
skipping to change at page 40, line 19 skipping to change at page 44, line 22
ospfv3VirtIfLinkLsaCksumSum OBJECT-TYPE ospfv3VirtIfLinkLsaCksumSum OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The 32-bit unsigned sum of the Link-Scope link-state "The 32-bit unsigned sum of the Link-Scope link-state
advertisements' LS checksums contained in this advertisements' LS checksums contained in this
virtual link's link-state database. The sum can be used virtual link's link-state database. The sum can be used
to determine if there has been a change in a to determine if there has been a change in a
router's link state database, and to compare the router's link state database or to compare the
link state database of two routers." link state database of two routers."
::= { ospfv3VirtIfEntry 13 } ::= { ospfv3VirtIfEntry 13 }
-- OSPFv3 Neighbor Table -- OSPFv3 Neighbor Table
-- The OSPFv3 Neighbor Table describes all neighbors in
-- the locality of the subject router.
ospfv3NbrTable OBJECT-TYPE ospfv3NbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3NbrEntry SYNTAX SEQUENCE OF Ospfv3NbrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A table of non-virtual neighbor information." "A table describing all neighbors in the
locality of the OSPFv3 router."
REFERENCE REFERENCE
"OSPF Version 2, Section 10 The Neighbor Data "OSPF Version 2, Section 10 The Neighbor Data
Structure" Structure"
::= { ospfv3Objects 9 } ::= { ospfv3Objects 9 }
ospfv3NbrEntry OBJECT-TYPE ospfv3NbrEntry OBJECT-TYPE
SYNTAX Ospfv3NbrEntry SYNTAX Ospfv3NbrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at page 43, line 22 skipping to change at page 47, line 23
REFERENCE REFERENCE
"OSPF Version 2, Section 10.1 Neighbor States" "OSPF Version 2, Section 10.1 Neighbor States"
::= { ospfv3NbrEntry 8 } ::= { ospfv3NbrEntry 8 }
ospfv3NbrEvents OBJECT-TYPE ospfv3NbrEvents OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of times this neighbor relationship "The number of times this neighbor relationship
has changed state, or an error has occurred." has changed state or an error has occurred.
Discontinuities in the value of this counter
can occur at re-initialization of the management
system and at other times as indicated by the
value of ospfv3DiscontinuityTime."
::= { ospfv3NbrEntry 9 } ::= { ospfv3NbrEntry 9 }
ospfv3NbrLsRetransQLen OBJECT-TYPE ospfv3NbrLsRetransQLen OBJECT-TYPE
SYNTAX Gauge32 SYNTAX Gauge32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The current length of the retransmission "The current length of the retransmission
queue." queue."
::= { ospfv3NbrEntry 10 } ::= { ospfv3NbrEntry 10 }
skipping to change at page 44, line 45 skipping to change at page 48, line 51
none:............no restart has yet been attempted. none:............no restart has yet been attempted.
inProgress:......a restart attempt is currently underway. inProgress:......a restart attempt is currently underway.
completed:.......the last restart completed successfully. completed:.......the last restart completed successfully.
timedOut:........the last restart timed out. timedOut:........the last restart timed out.
topologyChanged:.the last restart was aborted due to topologyChanged:.the last restart was aborted due to
a topology change." a topology change."
::= { ospfv3NbrEntry 15 } ::= { ospfv3NbrEntry 15 }
-- OSPFv3 Configured Neighbor Table -- OSPFv3 Configured Neighbor Table
-- The OSPFv3 Configured Neighbor Table describes all configured
-- neighbors
ospfv3CfgNbrTable OBJECT-TYPE ospfv3CfgNbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3CfgNbrEntry SYNTAX SEQUENCE OF Ospfv3CfgNbrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A table of configured, non-virtual neighbor "A table describing all configured neighbors."
information."
REFERENCE REFERENCE
"OSPF Version 2, Section 10 The Neighbor Data "OSPF Version 2, Section 10 The Neighbor Data
Structure" Structure"
::= { ospfv3Objects 10 } ::= { ospfv3Objects 10 }
ospfv3CfgNbrEntry OBJECT-TYPE ospfv3CfgNbrEntry OBJECT-TYPE
SYNTAX Ospfv3CfgNbrEntry SYNTAX Ospfv3CfgNbrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The information regarding a single configured "The information regarding a single configured
neighbor or neighbor discovered by lower-level neighbor.
protocols such as Inverse Neighbor Discovery."
The information in this table is persistent
and when written the entity SHOULD save the
change to non-volatile storage."
REFERENCE REFERENCE
"OSPF Version 2, Section 10 The Neighbor Data "OSPF Version 2, Section 10 The Neighbor Data
Structure" Structure"
INDEX { ospfv3CfgNbrIfIndex, INDEX { ospfv3CfgNbrIfIndex,
ospfv3CfgNbrIfInstId, ospfv3CfgNbrIfInstId,
ospfv3CfgNbrAddressType, ospfv3CfgNbrAddressType,
ospfv3CfgNbrAddress } ospfv3CfgNbrAddress }
::= { ospfv3CfgNbrTable 1 } ::= { ospfv3CfgNbrTable 1 }
Ospfv3CfgNbrEntry ::= SEQUENCE { Ospfv3CfgNbrEntry ::= SEQUENCE {
skipping to change at page 46, line 51 skipping to change at page 51, line 4
"This object permits management of the table by "This object permits management of the table by
facilitating actions such as row creation, facilitating actions such as row creation,
construction and destruction. construction and destruction.
The value of this object has no effect on The value of this object has no effect on
whether other objects in this conceptual row can be whether other objects in this conceptual row can be
modified." modified."
::= { ospfv3CfgNbrEntry 6 } ::= { ospfv3CfgNbrEntry 6 }
-- OSPFv3 Virtual Neighbor Table -- OSPFv3 Virtual Neighbor Table
-- This table describes all virtual neighbors.
-- Since Virtual Links are configured in the
-- virtual interface table, this table is read-only.
ospfv3VirtNbrTable OBJECT-TYPE ospfv3VirtNbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3VirtNbrEntry SYNTAX SEQUENCE OF Ospfv3VirtNbrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A table of virtual neighbor information." "A table describing all virtual neighbors."
REFERENCE REFERENCE
"OSPF Version 2, Section 15 Virtual Links" "OSPF Version 2, Section 15 Virtual Links"
::= { ospfv3Objects 11 } ::= { ospfv3Objects 11 }
ospfv3VirtNbrEntry OBJECT-TYPE ospfv3VirtNbrEntry OBJECT-TYPE
SYNTAX Ospfv3VirtNbrEntry SYNTAX Ospfv3VirtNbrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Virtual neighbor information." "Virtual neighbor information."
skipping to change at page 49, line 37 skipping to change at page 53, line 38
DESCRIPTION DESCRIPTION
"The state of the Virtual Neighbor Relationship." "The state of the Virtual Neighbor Relationship."
::= { ospfv3VirtNbrEntry 8 } ::= { ospfv3VirtNbrEntry 8 }
ospfv3VirtNbrEvents OBJECT-TYPE ospfv3VirtNbrEvents OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of times this virtual link has "The number of times this virtual link has
changed its state, or an error has occurred." changed its state or an error has occurred.
Discontinuities in the value of this counter
can occur at re-initialization of the management
system and at other times as indicated by the
value of ospfv3DiscontinuityTime."
::= { ospfv3VirtNbrEntry 9 } ::= { ospfv3VirtNbrEntry 9 }
ospfv3VirtNbrLsRetransQLen OBJECT-TYPE ospfv3VirtNbrLsRetransQLen OBJECT-TYPE
SYNTAX Gauge32 SYNTAX Gauge32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The current length of the retransmission "The current length of the retransmission
queue." queue."
::= { ospfv3VirtNbrEntry 10 } ::= { ospfv3VirtNbrEntry 10 }
skipping to change at page 50, line 50 skipping to change at page 55, line 4
timedOut (4), timedOut (4),
topologyChanged (5) topologyChanged (5)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Describes the outcome of the last attempt at acting "Describes the outcome of the last attempt at acting
as a Graceful restart helper for the neighbor. as a Graceful restart helper for the neighbor.
none:............no restart has yet been attempted. none:............no restart has yet been attempted.
inProgress:......a restart attempt is currently underway. inProgress:......a restart attempt is currently underway.
completed:.......the last restart completed successfully. completed:.......the last restart completed successfully.
timedOut:........the last restart timed out. timedOut:........the last restart timed out.
topologyChanged:.the last restart was aborted due to topologyChanged:.the last restart was aborted due to
a topology change." a topology change."
::= { ospfv3VirtNbrEntry 15 } ::= { ospfv3VirtNbrEntry 15 }
-- --
-- The OSPFv3 Area Aggregate Table -- The OSPFv3 Area Aggregate Table
-- --
ospfv3AreaAggregateTable OBJECT-TYPE ospfv3AreaAggregateTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3AreaAggregateEntry SYNTAX SEQUENCE OF Ospfv3AreaAggregateEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A range of IPv6 prefixes specified by a "The Area Aggregate Table acts as an adjunct
to the Area Table. It describes those address
aggregates that are configured to be propagated
from an area. Its purpose is to reduce the amount
of information that is known beyond an Area's
borders.
A range of IPv6 prefixes specified by a
prefix/prefix length pair. Note that if prefix/prefix length pair. Note that if
ranges are configured such that one range ranges are configured such that one range
subsumes another range the most specific subsumes another range the most specific
match is the preferred one." match is the preferred one."
::= { ospfv3Objects 12 } ::= { ospfv3Objects 12 }
ospfv3AreaAggregateEntry OBJECT-TYPE ospfv3AreaAggregateEntry OBJECT-TYPE
SYNTAX Ospfv3AreaAggregateEntry SYNTAX Ospfv3AreaAggregateEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A range of IPv6 prefixes specified by a "A single area aggregate entry.
prefix/prefix length pair. Note that if
ranges are configured such that one range Information in this table is persistent and
subsumes another range the most specific match is when this object is written the entity SHOULD
the preferred one." save the change to non-volatile storage."
REFERENCE REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters" "OSPF Version 2, Appendix C.2 Area parameters"
INDEX { ospfv3AreaAggregateAreaID, INDEX { ospfv3AreaAggregateAreaID,
ospfv3AreaAggregateAreaLsdbType, ospfv3AreaAggregateAreaLsdbType,
ospfv3AreaAggregatePrefixType, ospfv3AreaAggregatePrefixType,
ospfv3AreaAggregatePrefix, ospfv3AreaAggregatePrefix,
ospfv3AreaAggregatePrefixLength } ospfv3AreaAggregatePrefixLength }
::= { ospfv3AreaAggregateTable 1 } ::= { ospfv3AreaAggregateTable 1 }
Ospfv3AreaAggregateEntry ::= SEQUENCE { Ospfv3AreaAggregateEntry ::= SEQUENCE {
skipping to change at page 52, line 41 skipping to change at page 56, line 54
Advertisement header" Advertisement header"
::= { ospfv3AreaAggregateEntry 2 } ::= { ospfv3AreaAggregateEntry 2 }
ospfv3AreaAggregatePrefixType OBJECT-TYPE ospfv3AreaAggregatePrefixType OBJECT-TYPE
SYNTAX InetAddressType SYNTAX InetAddressType
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The prefix type of ospfv3AreaAggregatePrefix. Only "The prefix type of ospfv3AreaAggregatePrefix. Only
IPv6 addresses are expected." IPv6 addresses are expected."
::= { ospfv3AreaAggregateEntry 4 } ::= { ospfv3AreaAggregateEntry 3 }
ospfv3AreaAggregatePrefix OBJECT-TYPE ospfv3AreaAggregatePrefix OBJECT-TYPE
SYNTAX InetAddress (SIZE (0..16)) SYNTAX InetAddress (SIZE (0..16))
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The IPv6 Prefix." "The IPv6 Prefix."
REFERENCE REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters" "OSPF Version 2, Appendix C.2 Area parameters"
::= { ospfv3AreaAggregateEntry 5 } ::= { ospfv3AreaAggregateEntry 4 }
ospfv3AreaAggregatePrefixLength OBJECT-TYPE ospfv3AreaAggregatePrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength (3..128) SYNTAX InetAddressPrefixLength (3..128)
UNITS "bits" UNITS "bits"
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The length of the prefix (in bits). A prefix can "The length of the prefix (in bits). A prefix can
not be shorter than 3 bits." not be shorter than 3 bits."
REFERENCE REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters" "OSPF Version 2, Appendix C.2 Area parameters"
::= { ospfv3AreaAggregateEntry 6 } ::= { ospfv3AreaAggregateEntry 5 }
ospfv3AreaAggregateStatus OBJECT-TYPE ospfv3AreaAggregateStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object permits management of the table by "This object permits management of the table by
facilitating actions such as row creation, facilitating actions such as row creation,
construction and destruction. construction and destruction.
The value of this object has no effect on The value of this object has no effect on
whether other objects in this conceptual row can be whether other objects in this conceptual row can be
modified." modified."
::= { ospfv3AreaAggregateEntry 7 } ::= { ospfv3AreaAggregateEntry 6 }
ospfv3AreaAggregateEffect OBJECT-TYPE ospfv3AreaAggregateEffect OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
advertiseMatching(1), advertiseMatching(1),
doNotAdvertiseMatching(2) doNotAdvertiseMatching(2)
} }
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Prefixes subsumed by ranges either trigger the "Prefixes subsumed by ranges either trigger the
advertisement of the indicated aggregate advertisement of the indicated aggregate
(advertiseMatching), or result in the prefix not (advertiseMatching) or will result in the prefix not
being advertised at all outside the area." being advertised at all outside the area."
DEFVAL { advertiseMatching } DEFVAL { advertiseMatching }
::= { ospfv3AreaAggregateEntry 8 } ::= { ospfv3AreaAggregateEntry 7 }
ospfv3AreaAggregateRouteTag OBJECT-TYPE ospfv3AreaAggregateRouteTag OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This tag is advertised only in the summarized "This tag is advertised only in the summarized
As-External LSA when summarizing from NSSA-LSA's to As-External LSA when summarizing from NSSA-LSAs to
AS-External-LSA's." AS-External-LSAs."
DEFVAL { 0 } DEFVAL { 0 }
::= { ospfv3AreaAggregateEntry 9 } ::= { ospfv3AreaAggregateEntry 8 }
-- OSPFv3 Link-Scope Link State Database, for virtual interfaces
ospfv3VirtLinkLsdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3VirtLinkLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPFv3 Process's Link-Scope LSDB for virtual
interfaces. The LSDB contains the Link-Scope Link
State Advertisements from virtual interfaces."
::= { ospfv3Objects 13 }
ospfv3VirtLinkLsdbEntry OBJECT-TYPE
SYNTAX Ospfv3VirtLinkLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single Link-Scope Link State Advertisement
for a virtual interface."
INDEX { ospfv3VirtLinkLsdbIfAreaId,
ospfv3VirtLinkLsdbIfNeighbor,
ospfv3VirtLinkLsdbType,
ospfv3VirtLinkLsdbRouterId,
ospfv3VirtLinkLsdbLsid }
::= { ospfv3VirtLinkLsdbTable 1 }
Ospfv3VirtLinkLsdbEntry ::= SEQUENCE {
ospfv3VirtLinkLsdbIfAreaId
Ospfv3AreaIdTc,
ospfv3VirtLinkLsdbIfNeighbor
Ospfv3RouterIdTc,
ospfv3VirtLinkLsdbType
Unsigned32,
ospfv3VirtLinkLsdbRouterId
Ospfv3RouterIdTc,
ospfv3VirtLinkLsdbLsid
Unsigned32,
ospfv3VirtLinkLsdbSequence
Integer32,
ospfv3VirtLinkLsdbAge
Integer32,
ospfv3VirtLinkLsdbChecksum
Integer32,
ospfv3VirtLinkLsdbAdvertisement
OCTET STRING,
ospfv3VirtLinkLsdbTypeKnown
TruthValue
}
ospfv3VirtLinkLsdbIfAreaId OBJECT-TYPE
SYNTAX Ospfv3AreaIdTc
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Transit Area that the Virtual Link
traverses. By definition, this is not
Area 0."
::= { ospfv3VirtLinkLsdbEntry 1 }
ospfv3VirtLinkLsdbIfNeighbor OBJECT-TYPE
SYNTAX Ospfv3RouterIdTc
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Router ID of the Virtual Neighbor."
::= { ospfv3VirtLinkLsdbEntry 2 }
ospfv3VirtLinkLsdbType OBJECT-TYPE
SYNTAX Unsigned32(0..'FFFFFFFF'h)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the link state advertisement.
Each link state type has a separate
advertisement format. Link-Scope LSAs unrecognized
by the router are also stored in this database."
::= { ospfv3VirtLinkLsdbEntry 3 }
ospfv3VirtLinkLsdbRouterId OBJECT-TYPE
SYNTAX Ospfv3RouterIdTc
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The 32 bit number that uniquely identifies the
originating router in the Autonomous System."
REFERENCE
"OSPF Version 2, Appendix C.1 Global parameters"
::= { ospfv3VirtLinkLsdbEntry 4 }
ospfv3VirtLinkLsdbLsid OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Link State ID is an LS Type Specific field
containing a unique identifier;
it identifies the piece of the routing domain
that is being described by the advertisement.
In contrast to OSPFv2, the LSID has no
addressing semantics."
::= { ospfv3VirtLinkLsdbEntry 5 }
-- Note that the OSPF Sequence Number is a 32 bit signed
-- integer. It starts with the value '80000001'h,
-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
-- Thus, a typical sequence number will be very negative.
ospfv3VirtLinkLsdbSequence OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sequence number field is a signed 32-bit
integer. It is used to detect old and duplicate
link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement."
REFERENCE
"OSPF Version 2, Section 12.1.6 LS sequence
number"
::= { ospfv3VirtLinkLsdbEntry 6 }
ospfv3VirtLinkLsdbAge OBJECT-TYPE
SYNTAX Integer32 -- Should be 0..MaxAge
-- unless DoNotAge bit is set
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the age of the link state
advertisement in seconds."
REFERENCE
"OSPF Version 2, Section 12.1.1 LS age"
::= { ospfv3VirtLinkLsdbEntry 7 }
ospfv3VirtLinkLsdbChecksum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO
connectionless datagrams; it is commonly
referred to as the Fletcher checksum."
REFERENCE
"OSPF Version 2, Section 12.1.7 LS checksum"
::= { ospfv3VirtLinkLsdbEntry 8 }
ospfv3VirtLinkLsdbAdvertisement OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..65535))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The entire Link State Advertisement, including
its header."
::= { ospfv3VirtLinkLsdbEntry 9 }
ospfv3VirtLinkLsdbTypeKnown OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the LSA type is recognized by this
Router."
::= { ospfv3VirtLinkLsdbEntry 10 }
-- The Ospfv3 Notification Table -- The Ospfv3 Notification Table
-- The Ospfv3 Notification Table records fields that are -- The Ospfv3 Notification Table records fields that are
-- required for notifications -- required for notifications
ospfv3NotificationEntry OBJECT IDENTIFIER ospfv3NotificationEntry OBJECT IDENTIFIER
::= { ospfv3Objects 13 } ::= { ospfv3Objects 14 }
ospfv3ConfigErrorType OBJECT-TYPE ospfv3ConfigErrorType OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
badVersion (1), badVersion (1),
areaMismatch (2), areaMismatch (2),
unknownNbmaNbr (3), -- Router is DR eligible unknownNbmaNbr (3), -- Router is DR eligible
unknownVirtualNbr (4), unknownVirtualNbr (4),
helloIntervalMismatch (5), helloIntervalMismatch (5),
deadIntervalMismatch (6), deadIntervalMismatch (6),
optionMismatch (7), optionMismatch (7),
mtuMismatch (8), mtuMismatch (8),
duplicateRouterId (9), duplicateRouterId (9),
noError (10) } noError (10) }
MAX-ACCESS accessible-for-notify MAX-ACCESS accessible-for-notify
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Potential types of configuration conflicts. "Potential types of configuration conflicts.
Used by the ospfv3ConfigError and Used by the ospfv3ConfigError and
ospfv3ConfigVirtError notifications. When the last value ospfv3ConfigVirtError notifications. When the last value
of a notification using this object is needed, but no of a notification using this object is needed, but no
notifications of that type have been sent, this value notifications of that type have been sent, the value
pertaining to this object should be returned as pertaining to this object should be returned as
noError" noError."
::= { ospfv3NotificationEntry 1 } ::= { ospfv3NotificationEntry 1 }
ospfv3PacketType OBJECT-TYPE ospfv3PacketType OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
hello (1), hello (1),
dbDescript (2), dbDescript (2),
lsReq (3), lsReq (3),
lsUpdate (4), lsUpdate (4),
lsAck (5), lsAck (5),
nullPacket (6) } nullPacket (6) }
MAX-ACCESS accessible-for-notify MAX-ACCESS accessible-for-notify
STATUS current STATUS current
skipping to change at page 54, line 47 skipping to change at page 62, line 18
lsReq (3), lsReq (3),
lsUpdate (4), lsUpdate (4),
lsAck (5), lsAck (5),
nullPacket (6) } nullPacket (6) }
MAX-ACCESS accessible-for-notify MAX-ACCESS accessible-for-notify
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"OSPFv3 packet types. When the last value of a notification "OSPFv3 packet types. When the last value of a notification
using this object is needed, but no notifications of using this object is needed, but no notifications of
that type have been sent, the value pertaining that type have been sent, the value pertaining
to this object should be returned as nullPacket" to this object should be returned as nullPacket."
::= { ospfv3NotificationEntry 2 } ::= { ospfv3NotificationEntry 2 }
ospfv3PacketSrc OBJECT-TYPE ospfv3PacketSrc OBJECT-TYPE
SYNTAX InetAddress SYNTAX InetAddress (SIZE (16))
MAX-ACCESS accessible-for-notify MAX-ACCESS accessible-for-notify
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The IPv6 address of an inbound packet that cannot "The IPv6 address of an inbound packet that cannot
be identified by a neighbor instance. When be identified by a neighbor instance. When
the last value of a notification using this object is the last value of a notification using this object is
needed, but no notifications of that type have been sent, needed, but no notifications of that type have been sent,
the value pertaining to this object should the value pertaining to this object should
be returned as 0 be returned as 0.
Only IPv6 addresses without zone index are expected." Only IPv6 addresses without zone index are expected."
::= { ospfv3NotificationEntry 3 } ::= { ospfv3NotificationEntry 3 }
-- Notification definitions -- Notification definitions
ospfv3VirtIfStateChange NOTIFICATION-TYPE ospfv3VirtIfStateChange NOTIFICATION-TYPE
OBJECTS { ospfv3RouterId, -- The originator of the notification OBJECTS { ospfv3RouterId, -- The originator of the notification
ospfv3VirtIfState -- The new state ospfv3VirtIfState -- The new state
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An ospfv3VirtIfStateChange notification signifies that there "An ospfv3VirtIfStateChange notification signifies that
has been a change in the state of an OSPFv3 virtual there has been a change in the state of an OSPFv3 virtual
interface. interface.
This notification should be generated when the interface This notification should be generated when the interface
state regresses (e.g., goes from Point-to-Point to Down) state regresses (e.g., goes from Point-to-Point to Down)
or progresses to a terminal state (i.e., Point-to-Point)." or progresses to a terminal state (i.e., Point-to-Point)."
::= { ospfv3Notifications 1 } ::= { ospfv3Notifications 1 }
ospfv3NbrStateChange NOTIFICATION-TYPE ospfv3NbrStateChange NOTIFICATION-TYPE
OBJECTS { ospfv3RouterId, -- The originator of OBJECTS { ospfv3RouterId, -- The originator of the notification
-- the notification
ospfv3NbrState -- The new state ospfv3NbrState -- The new state
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An ospfv3NbrStateChange notification signifies that "An ospfv3NbrStateChange notification signifies that
there has been a change in the state of a there has been a change in the state of a
non-virtual OSPFv3 neighbor. This notification should be non-virtual OSPFv3 neighbor. This notification should be
generated when the neighbor state regresses generated when the neighbor state regresses
(e.g., goes from Attempt or Full to 1-Way or (e.g., goes from Attempt or Full to 1-Way or
Down) or progresses to a terminal state (e.g., Down) or progresses to a terminal state (e.g.,
skipping to change at page 57, line 17 skipping to change at page 64, line 40
::= { ospfv3Notifications 6 } ::= { ospfv3Notifications 6 }
ospfv3VirtIfRxBadPacket NOTIFICATION-TYPE ospfv3VirtIfRxBadPacket NOTIFICATION-TYPE
OBJECTS { ospfv3RouterId, -- The originator of the notification OBJECTS { ospfv3RouterId, -- The originator of the notification
ospfv3VirtIfState, -- State of the interface ospfv3VirtIfState, -- State of the interface
ospfv3PacketType -- Type of packet ospfv3PacketType -- Type of packet
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An ospfv3VirtIfRxBadPacket notification signifies "An ospfv3VirtIfRxBadPacket notification signifies
that an OSPFv3 packet that cannot be parsed has been received that an OSPFv3 packet that cannot be parsed has been
on a virtual interface." received on a virtual interface."
::= { ospfv3Notifications 7 } ::= { ospfv3Notifications 7 }
ospfv3LsdbOverflow NOTIFICATION-TYPE ospfv3LsdbOverflow NOTIFICATION-TYPE
OBJECTS { ospfv3RouterId, -- The originator of the notification OBJECTS { ospfv3RouterId, -- The originator of the notification
ospfv3ExtAreaLsdbLimit -- Limit on External LSAs ospfv3ExtAreaLsdbLimit -- Limit on External LSAs
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An ospfv3LsdbOverflow notification signifies that the "An ospfv3LsdbOverflow notification signifies that the
number of LSAs in the router's link-state number of LSAs in the router's link-state
skipping to change at page 57, line 54 skipping to change at page 65, line 26
ospfv3IfStateChange NOTIFICATION-TYPE ospfv3IfStateChange NOTIFICATION-TYPE
OBJECTS { ospfv3RouterId, -- The originator of the notification OBJECTS { ospfv3RouterId, -- The originator of the notification
ospfv3IfState -- The new state ospfv3IfState -- The new state
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An ospfv3IfStateChange notification signifies that there "An ospfv3IfStateChange notification signifies that there
has been a change in the state of a non-virtual has been a change in the state of a non-virtual
OSPFv3 interface. This notification should be generated OSPFv3 interface. This notification should be generated
when the interface state regresses (e.g., goes when the interface state regresses (e.g., goes
from Dr to Down) or progresses to a terminal from DR to Down) or progresses to a terminal
state (i.e., Point-to-Point, DR Other, Dr, or state (i.e., Point-to-Point, DR Other, DR, or
Backup)." Backup)."
::= { ospfv3Notifications 10 } ::= { ospfv3Notifications 10 }
ospfv3NssaTranslatorStatusChange NOTIFICATION-TYPE ospfv3NssaTranslatorStatusChange NOTIFICATION-TYPE
OBJECTS { ospfv3RouterId, -- The originator of the notification OBJECTS { ospfv3RouterId, -- The originator of the notification
ospfv3AreaNssaTranslatorState -- new state ospfv3AreaNssaTranslatorState -- new state
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An ospfv3NssaTranslatorStatusChange notification "An ospfv3NssaTranslatorStatusChange notification
skipping to change at page 59, line 33 skipping to change at page 67, line 6
DESCRIPTION "The compliance statement" DESCRIPTION "The compliance statement"
MODULE -- this module MODULE -- this module
MANDATORY-GROUPS { MANDATORY-GROUPS {
ospfv3BasicGroup, ospfv3BasicGroup,
ospfv3AreaGroup, ospfv3AreaGroup,
ospfv3IfGroup, ospfv3IfGroup,
ospfv3VirtIfGroup, ospfv3VirtIfGroup,
ospfv3NbrGroup, ospfv3NbrGroup,
ospfv3CfgNbrGroup, ospfv3CfgNbrGroup,
ospfv3VirtNbrGroup, ospfv3VirtNbrGroup,
ospfv3AreaAggregateGroup, ospfv3AreaAggregateGroup
ospfv3NotificationObjectGroup,
ospfv3NotificationGroup
} }
GROUP ospfv3AsLsdbGroup GROUP ospfv3AsLsdbGroup
DESCRIPTION DESCRIPTION
"This group is required for OSPFv3 systems that "This group is required for OSPFv3 systems that
display their AS-scope link state database." display their AS-scope link state database."
GROUP ospfv3AreaLsdbGroup GROUP ospfv3AreaLsdbGroup
DESCRIPTION DESCRIPTION
"This group is required for OSPFv3 systems that "This group is required for OSPFv3 systems that
display their Area-scope link state database." display their Area-scope link state database."
GROUP ospfv3LinkLsdbGroup GROUP ospfv3LinkLsdbGroup
DESCRIPTION DESCRIPTION
"This group is required for OSPFv3 systems that "This group is required for OSPFv3 systems that
display their Link-scope link state database." display their Link-scope link state database
for non-virtual interfaces."
GROUP ospfv3VirtLinkLsdbGroup
DESCRIPTION
"This group is required for OSPFv3 systems that
display their Link-scope link state database
for virtual interfaces."
GROUP ospfv3HostGroup GROUP ospfv3HostGroup
DESCRIPTION DESCRIPTION
"This group is required for OSPFv3 systems that "This group is required for OSPFv3 systems that
support attached hosts." support attached hosts."
GROUP ospfv3NotificationObjectGroup
DESCRIPTION
"This group is required for OSPFv3 systems that
support OSPFv3 notifications."
GROUP ospfv3NotificationGroup
DESCRIPTION
"This group is required for OSPFv3 systems that
support OSPFv3 notifications."
OBJECT ospfv3NbrAddressType OBJECT ospfv3NbrAddressType
SYNTAX InetAddressType { ipv6(2) } SYNTAX InetAddressType { ipv6(2) }
DESCRIPTION DESCRIPTION
"An implementation is only required to support IPv6 "An implementation is only required to support IPv6
address without zone index." address without zone index."
OBJECT ospfv3VirtNbrAddressType OBJECT ospfv3VirtNbrAddressType
SYNTAX InetAddressType { ipv6(2) } SYNTAX InetAddressType { ipv6(2) }
DESCRIPTION DESCRIPTION
"An implementation is only required to support IPv6 "An implementation is only required to support IPv6
skipping to change at page 60, line 36 skipping to change at page 68, line 21
ospfv3AdminStat, ospfv3AdminStat,
ospfv3VersionNumber, ospfv3VersionNumber,
ospfv3AreaBdrRtrStatus, ospfv3AreaBdrRtrStatus,
ospfv3ASBdrRtrStatus, ospfv3ASBdrRtrStatus,
ospfv3AsScopeLsaCount, ospfv3AsScopeLsaCount,
ospfv3AsScopeLsaCksumSum, ospfv3AsScopeLsaCksumSum,
ospfv3OriginateNewLsas, ospfv3OriginateNewLsas,
ospfv3RxNewLsas, ospfv3RxNewLsas,
ospfv3ExtLsaCount, ospfv3ExtLsaCount,
ospfv3ExtAreaLsdbLimit, ospfv3ExtAreaLsdbLimit,
ospfv3MulticastExtensions,
ospfv3ExitOverflowInterval, ospfv3ExitOverflowInterval,
ospfv3DemandExtensions, ospfv3DemandExtensions,
ospfv3ReferenceBandwidth, ospfv3ReferenceBandwidth,
ospfv3RestartSupport, ospfv3RestartSupport,
ospfv3RestartInterval, ospfv3RestartInterval,
ospfv3RestartStrictLsaChecking,
ospfv3RestartStatus, ospfv3RestartStatus,
ospfv3RestartAge, ospfv3RestartAge,
ospfv3RestartExitRc, ospfv3RestartExitRc,
ospfv3NotificationEnable ospfv3NotificationEnable,
ospfv3StubRouterSupport,
ospfv3StubRouterAdvertisement,
ospfv3DiscontinuityTime
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"These objects are used for managing/monitoring "These objects are used for managing/monitoring
OSPFv3 global parameters." OSPFv3 global parameters."
::= { ospfv3Groups 1 } ::= { ospfv3Groups 1 }
ospfv3AreaGroup OBJECT-GROUP ospfv3AreaGroup OBJECT-GROUP
OBJECTS { OBJECTS {
ospfv3ImportAsExtern, ospfv3AreaImportAsExtern,
ospfv3AreaSpfRuns, ospfv3AreaSpfRuns,
ospfv3AreaBdrRtrCount, ospfv3AreaBdrRtrCount,
ospfv3AreaAsBdrRtrCount, ospfv3AreaAsBdrRtrCount,
ospfv3AreaScopeLsaCount, ospfv3AreaScopeLsaCount,
ospfv3AreaScopeLsaCksumSum, ospfv3AreaScopeLsaCksumSum,
ospfv3AreaSummary, ospfv3AreaSummary,
ospfv3AreaStatus, ospfv3AreaStatus,
ospfv3StubMetric, ospfv3AreaStubMetric,
ospfv3AreaNssaTranslatorRole, ospfv3AreaNssaTranslatorRole,
ospfv3AreaNssaTranslatorState, ospfv3AreaNssaTranslatorState,
ospfv3AreaNssaTranslatorStabInt, ospfv3AreaNssaTranslatorStabInt,
ospfv3AreaNssaTranslatorEvents, ospfv3AreaNssaTranslatorEvents,
ospfv3AreaStubMetricType ospfv3AreaStubMetricType
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"These objects are used for OSPFv3 systems "These objects are used for OSPFv3 systems
supporting areas." supporting areas."
skipping to change at page 62, line 10 skipping to change at page 69, line 52
OBJECTS { OBJECTS {
ospfv3LinkLsdbSequence, ospfv3LinkLsdbSequence,
ospfv3LinkLsdbAge, ospfv3LinkLsdbAge,
ospfv3LinkLsdbChecksum, ospfv3LinkLsdbChecksum,
ospfv3LinkLsdbAdvertisement, ospfv3LinkLsdbAdvertisement,
ospfv3LinkLsdbTypeKnown ospfv3LinkLsdbTypeKnown
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"These objects are used for OSPFv3 systems "These objects are used for OSPFv3 systems
that display their Link-scope link state database." that display their Link-scope link state database
for non-virtual interfaces."
::= { ospfv3Groups 5 } ::= { ospfv3Groups 5 }
ospfv3HostGroup OBJECT-GROUP ospfv3HostGroup OBJECT-GROUP
OBJECTS { OBJECTS {
ospfv3HostMetric, ospfv3HostMetric,
ospfv3HostStatus, ospfv3HostStatus,
ospfv3HostAreaID ospfv3HostAreaID
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at page 62, line 41 skipping to change at page 70, line 31
ospfv3IfTransitDelay, ospfv3IfTransitDelay,
ospfv3IfRetransInterval, ospfv3IfRetransInterval,
ospfv3IfHelloInterval, ospfv3IfHelloInterval,
ospfv3IfRtrDeadInterval, ospfv3IfRtrDeadInterval,
ospfv3IfPollInterval, ospfv3IfPollInterval,
ospfv3IfState, ospfv3IfState,
ospfv3IfDesignatedRouter, ospfv3IfDesignatedRouter,
ospfv3IfBackupDesignatedRouter, ospfv3IfBackupDesignatedRouter,
ospfv3IfEvents, ospfv3IfEvents,
ospfv3IfStatus, ospfv3IfStatus,
ospfv3IfMulticastForwarding,
ospfv3IfDemand, ospfv3IfDemand,
ospfv3IfMetricValue, ospfv3IfMetricValue,
ospfv3IfLinkScopeLsaCount, ospfv3IfLinkScopeLsaCount,
ospfv3IfLinkLsaCksumSum, ospfv3IfLinkLsaCksumSum,
ospfv3IfDemandNbrProbe, ospfv3IfDemandNbrProbe,
ospfv3IfDemandNbrProbeRetxLimit, ospfv3IfDemandNbrProbeRetxLimit,
ospfv3IfDemandNbrProbeInterval ospfv3IfDemandNbrProbeInterval
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at page 64, line 37 skipping to change at page 72, line 26
ospfv3AreaAggregateEffect, ospfv3AreaAggregateEffect,
ospfv3AreaAggregateRouteTag ospfv3AreaAggregateRouteTag
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"These area aggregate objects used required for "These area aggregate objects used required for
aggregating OSPFv3 prefixes for summarization aggregating OSPFv3 prefixes for summarization
across areas." across areas."
::= { ospfv3Groups 12 } ::= { ospfv3Groups 12 }
ospfv3VirtLinkLsdbGroup OBJECT-GROUP
OBJECTS {
ospfv3VirtLinkLsdbSequence,
ospfv3VirtLinkLsdbAge,
ospfv3VirtLinkLsdbChecksum,
ospfv3VirtLinkLsdbAdvertisement,
ospfv3VirtLinkLsdbTypeKnown
}
STATUS current
DESCRIPTION
"These objects are used for OSPFv3 systems
that display their Link-scope link state database
for virtual interfaces."
::= { ospfv3Groups 13 }
ospfv3NotificationObjectGroup OBJECT-GROUP ospfv3NotificationObjectGroup OBJECT-GROUP
OBJECTS { OBJECTS {
ospfv3ConfigErrorType, ospfv3ConfigErrorType,
ospfv3PacketType, ospfv3PacketType,
ospfv3PacketSrc ospfv3PacketSrc
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"These objects are used to record notification "These objects are used to record notification
parameters" parameters"
::= { ospfv3Groups 13 } ::= { ospfv3Groups 14 }
ospfv3NotificationGroup NOTIFICATION-GROUP ospfv3NotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { NOTIFICATIONS {
ospfv3VirtIfStateChange, ospfv3VirtIfStateChange,
ospfv3NbrStateChange, ospfv3NbrStateChange,
ospfv3VirtNbrStateChange, ospfv3VirtNbrStateChange,
ospfv3IfConfigError, ospfv3IfConfigError,
ospfv3VirtIfConfigError, ospfv3VirtIfConfigError,
ospfv3IfRxBadPacket, ospfv3IfRxBadPacket,
ospfv3VirtIfRxBadPacket, ospfv3VirtIfRxBadPacket,
skipping to change at page 65, line 16 skipping to change at page 73, line 20
ospfv3LsdbApproachingOverflow, ospfv3LsdbApproachingOverflow,
ospfv3IfStateChange, ospfv3IfStateChange,
ospfv3NssaTranslatorStatusChange, ospfv3NssaTranslatorStatusChange,
ospfv3RestartStatusChange, ospfv3RestartStatusChange,
ospfv3NbrRestartHelperStatusChange, ospfv3NbrRestartHelperStatusChange,
ospfv3VirtNbrRestartHelperStatusChange ospfv3VirtNbrRestartHelperStatusChange
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This group is used for OSPFv3 notifications" "This group is used for OSPFv3 notifications"
::= { ospfv3Groups 14 } ::= { ospfv3Groups 15 }
END END
5. Security Considerations 6. Security Considerations
There are a number of management objects defined in this MIB that There are a number of management objects defined in this MIB that
have a MAX-ACCESS clause of read-write and/or read-create. Such have a MAX-ACCESS clause of read-write and/or read-create. Such
objects may be considered sensitive or vulnerable in some network objects may be considered sensitive or vulnerable in some network
environments. The support for SET operations in a non-secure environments. The support for SET operations in a non-secure
environment without proper protection can have a negative effect on environment without proper protection can have a negative effect on
network operations. network operations.
It is recommended that attention be specifically given to It is recommended that attention be specifically given to
implementing the MAX-ACCESS clause in objects in scenarios implementing the MAX-ACCESS clause in objects in scenarios
skipping to change at page 65, line 53 skipping to change at page 74, line 5
features as provided by the SNMPv3 framework. Specifically, the use features as provided by the SNMPv3 framework. Specifically, the use
of the User-based Security Model RFC 3414 [RFC3414] and the of the User-based Security Model RFC 3414 [RFC3414] and the
View-based Access Control Model RFC 3415 [RFC3415] is recommended. View-based Access Control Model RFC 3415 [RFC3415] is recommended.
It is then a customer/user responsibility to ensure that the SNMP It is then a customer/user responsibility to ensure that the SNMP
entity giving access to an instance of this MIB, is properly entity giving access to an instance of this MIB, is properly
configured to give access to the objects only to those principals configured to give access to the objects only to those principals
(users) that have legitimate rights to indeed GET or SET (users) that have legitimate rights to indeed GET or SET
(change/create/delete) them. (change/create/delete) them.
6. IANA Considerations 7. IANA Considerations
The MIB module in this document uses the following IANA-assigned The MIB module in this document uses the following IANA-assigned
OBJECT IDENTIFIER values recorded in the SMI Numbers registry: OBJECT IDENTIFIER values recorded in the SMI Numbers registry:
Descriptor OBJECT IDENTIFIER value Descriptor OBJECT IDENTIFIER value
---------- ----------------------- ---------- -----------------------
ospfv3MIB { mib-2 XXX } ospfv3MIB { mib-2 XXX }
[Editor's Note (to be removed prior to publication): the IANA is [Editor's Note (to be removed prior to publication): the IANA is
requested to assign a value for "XXX" under the 'mib-2' subtree and requested to assign a value for "XXX" under the 'mib-2' subtree and
to record the assignment in the SMI Numbers registry. When the to record the assignment in the SMI Numbers registry. When the
assignment has been made, the RFC Editor is asked to replace "XXX" assignment has been made, the RFC Editor is asked to replace "XXX"
(here and in the MIB module) with the assigned value and to remove (here and in the MIB module) with the assigned value and to remove
this note.] this note.]
7. Acknowledgements 8. Acknowledgements
This document is based on the MIB for OSPF version 2 by Rob This document is based on the MIB for OSPF version 2 [RFC4750]. The
Coltun and Fred Baker [RFC1850]. The editors would like to thank editors would like to thank Toshiaki Takada, Ramachandran
Toshiaki Takada, Ramachandran Radhakrishnan, Harikrishna Golapalli Radhakrishnan, Harikrishna Golapalli Mahesh Kurapati, Acee Lindem,
Mahesh Kurapati, Acee Lindem, Keith McCloghrie, Manish Gupta, Keith McCloghrie, Manish Gupta, Nic Neate, Vanitha N., Vivek Dubey,
Nic Neate, Vanitha N., Vivek Dubey and Ramana Koppula for their Ramana Koppula, Boris Benenson and Hong Zhang for their constructive
constructive comments. comments.
8. Normative References 9. Normative References
[RFC2328] Moy, J., "OSPF Version 2", RFC 2328, April 1998.
[RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., [RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M. and S. Waldbusser, "Structure of Management Rose, M. and S. Waldbusser, "Structure of Management
Information Version 2 (SMIv2)", STD 58, RFC 2578, April Information Version 2 (SMIv2)", STD 58, RFC 2578, April
1999. 1999.
[RFC2579] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., [RFC2579] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M. and S. Waldbusser, "Textual Conventions for Rose, M. and S. Waldbusser, "Textual Conventions for
SMIv2", STD 58, RFC 2579, April 1999. SMIv2", STD 58, RFC 2579, April 1999.
[RFC2580] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., [RFC2580] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M. and S. Waldbusser, "Conformance Statements for Rose, M. and S. Waldbusser, "Conformance Statements for
SMIv2", STD 58, RFC 2580, April 1999. SMIv2", STD 58, RFC 2580, April 1999.
[RFC1850] Baker, F., and Coltun, R., "OSPF Version 2 Management
Information Base", RFC 1850, November 1995.
[RFC2740] Coltun, R., Ferguson, D., Moy, J., "OSPF for IPv6", RFC [RFC2740] Coltun, R., Ferguson, D., Moy, J., "OSPF for IPv6", RFC
2740, December 1999. 2740, December 1999.
[RFC2465] Haskin, D., Onishi, S., "Management Information Base for [RFC4293] Routhier, S. Ed., "Management Information Base for
IP Version 6: Textual Conventions and General Group", RFC The Internet Protocol (IP)", RFC 4293, April 2006.
2465, December 1998.
[RFC2328] Moy, J., "OSPF Version 2", RFC 2328, April 1998. [RFC4750] Joyal, D., Galecki, P. and Giacalone, S., "OSPF Version 2
Management Information Base", RFC 4750, December 2006.
9. Informative References 10. Informative References
[RFC1224] Steinberg, L., "Techniques for Managing Asynchronously
Generated Alerts", RFC 1224, May 1991.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997. Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2460] Deering, S., and R. Hinden, "Internet Protocol, Version 6 [RFC2460] Deering, S., and R. Hinden, "Internet Protocol, Version 6
(IPv6) Specification", RFC 2460, December 1998. (IPv6) Specification", RFC 2460, December 1998.
[RFC3410] Case, J., Mundy, R., Partain, D. and B. Stewart, [RFC3410] Case, J., Mundy, R., Partain, D., Stewart, B.,
"Introduction and Applicability Statements for "Introduction and Applicability Statements for
Internet-Standard Management Framework", RFC 3410, Internet-Standard Management Framework", RFC 3410,
December 2002. December 2002.
[RFC3411] Harrington, D., Presuhn, R., Wijnen, B.,
"An Architecture for Describing Simple Network Management
Protocol (SNMP) Management Frameworks", RFC 3411,
December 2002.
[RFC3414] Blumenthal, U., Wijnen, B., "User-based Security Model [RFC3414] Blumenthal, U., Wijnen, B., "User-based Security Model
(USM) for version 3 of the Simple Network Management (USM) for version 3 of the Simple Network Management
Protocol (SNMPv3)", RFC 3414, December 2002. Protocol (SNMPv3)", RFC 3414, December 2002.
[RFC3415] Wijnen, B., Presuhn, R., McCloghrie, K., [RFC3415] Wijnen, B., Presuhn, R., McCloghrie, K.,
"View-based Access Control Model (VACM) for the "View-based Access Control Model (VACM) for the
Simple Network Management Protocol (SNMP)", RFC 3415, Simple Network Management Protocol (SNMP)", RFC 3415,
December 2002. December 2002.
10. Contributors' Addresses 11. Contributors' Addresses
Jacek Kwiatkowski Jacek Kwiatkowski
Intel Technology Poland Intel Technology Poland
ul. Slowackiego 173 ul. Slowackiego 173
80-298 Gdansk, Poland 80-298 Gdansk, Poland
Email: jacek.kwiatkowski@intel.com Email: jacek.kwiatkowski@intel.com
Sebastian Zwolinski Sebastian Zwolinski
Intel Technology Poland Intel Technology Poland
ul. Slowackiego 173 ul. Slowackiego 173
80-298 Gdansk, Poland 80-298 Gdansk, Poland
Email: sebastian.zwolinski@intel.com Email: sebastian.zwolinski@intel.com
11. Editors' Addresses 12. Editors' Addresses
Dan Joyal Dan Joyal
Nortel Nortel
600 Technology Park Drive 600 Technology Park Drive
Billerica, MA 01821 Billerica, MA 01821
Email: djoyal@nortel.com Email: djoyal@nortel.com
Vishwas Manral Vishwas Manral
IP Infusion IP Infusion
Bangalore Bangalore
India India
Email: vishwas@ipinfusion.com Email: vishwas@ipinfusion.com
12. Differences from RFC 1850
(1) Textual Conventions are imported from INET-ADDRESS-MIB,
IF-MIB and OSPF-MIB MIBs.
(2) The "ospf" prefix for entity names is changed to
"ospfv3".
(3) General Group object name ospfVersionNumber is changed to
ospfv3VersionNumber and its value is changed from 2 to 3.
(4) General Group object name ospfExternLsaCount is changed
to ospfv3AsScopeLsaCount to indicate countof all
AS-scoped LSAs in the database.
(5) General Group object name ospfExternLsaCksumSum is
changed to ospfv3AsScopeCksumSum to indicate checksum of
all AS-scoped LSAs in the database.
(6) Removed General Group object ospfTOSSupport.
(7) Removed ospfAuthType object from Area entry.
(8) Changed object names ospfAreaLsaCount and
ospfAreaLsaCksumSum to ospfv3AreaScopeLsaCount and
ospfv3AreaScopeLsaCksumSum.
(9) Removed OSPF Area Default Metric Table.
(10) Added object ospfv3StubMetric to Area entry as substitute
for Area Default Metric Table.
(11) Changed name of External LSDB Table to AS-Scope LSDB
Table. Replaced object name prefix "ospfExtLsdb" with
"ospfv3AsLsdb".
(12) Changed name of LSDB Table to Area-Scope LSDB Table.
Replaced object name prefix "ospfLsdb" with
"ospfv3AreaLsdb".
(13) Added ospfv3LinkLsdbTable which contains all LSAs of
Link-Scope. Index of ospfv3LinkLsdbTable is interface
index, LSA Type, Router ID and LSID.
(14) Re-ordered Router ID and LSID index components of LSDB
table entries. Since LSIDs no longer have addressing
semantics, GET-NEXT operations on partial OIDs are more
useful when the Router ID component comes before the LSID
component.
(15) Address Range Table is removed.
(16) Removed ospfHostTOS from Host Table entry. Object
ospfHostIpAddress changed to ospfv3HostAddress with
SYNTAX changed from IpAddress to InetAddress.
(17) Added object ospfv3HostAddressType to Host Table entry to
determine the address type of ospfv3HostAddress.
(18) The MAX-ACCESS value of object ospfv3HostAreaID is
changed to read-create.
(19) Objects ospfIfIpAddress and ospfAddressLessIf removed
from Interface entry and as Interface Table entry index
components.
(20) Object ospfv3IfIndex added to Interface Table entry with
SYNTAX InterfaceIndex. It replaces ospfIfIpAddress and
ospfAddressLessIf as the Interface Table entry index.
(21) The SYNTAX of objects ospfIfDesignatedRouter and
ospfIfBackupDesignatedRouter is changed from IpAddress
to RouterID.
(22) Objects ospfIfAuthType and ospfIfAuthKey are removed from
Interface and Virtual Interface entries.
(23) Added objects ospfv3IfLinkScopeLsaCount and
ospfv3IfLinkLsaCksumSum to Interface entry. They maintain
the count of Link-Scope LSAs and the checksum of the
Link-Scope LSA database associated with the interface.
(24) Removed OSPF Interface Metric Table. Metric is now
accessed via object ospfv3IfMetricValue in the Interface
entry.
(25) Added object ospfv3IfInstId to Interface entry to enable
the setting of the interface instance value of the
interface. The default value is zero.
(26) Added object ospfv3VirtIfIndex to Virtual Interface entry
which is used to assign a local interface ID to the
virtual interface.
(27) Added objects ospfv3VirtIfLinkScopeLsaCount and
ospfv3VirtIfLinkLsaCksumSum to Virtual Interface entry.
They maintain the count of Link-Scope LSAs and the
checksum of the Link-Scope LSA database associated with
the virtual interface.
(28) The Neighbor Table (ospfv3NbrTable) is a read-only table
and it contains only the neighbors that were learned from
LSAs.
(29) Removed objects ospfNbrIpAddr and ospfNbrAddressLessIndex
from Neighbor entry.
(30) Added object ospfv3NbrIfIndex to Neighbor entry. Index
components ospfNbrIpAddr and ospfNbrAddressLessIndex are
replaced with ospfv3NbrIfIndex and ospfv3NbrRtrId.
(31) Added object ospfv3NbrAddressType to Neighbor entry to
determine the address type of ospfv3NbrAddress.
(32) Added object ospfv3NbrAddress to Neighbor entry. This
object contains the neighbor's IPv6 address.
(33) Removed objects ospfCfgNbrStatus and
ospfCfgNbrPermanence from Neighbor entry.
(34) Added object ospfv3NbrIfId to Neighbor entry. This object
contains the neighbor's local interface index from the
neighbor's hellos advertised on the link.
(35) The MAX-ACCESS value of object ospfNbrPriority is
changed to read-only. Removed DEFVAL for object
ospfv3NbrPriority.
(36) Added ospfv3CfgNbrTable (Configured Neighbor Table)
containing all manually configured neighbors. The index of
ospfv3CfgNbrTable is ospfv3CfgNbrIfIndex,
ospfv3CfgAddressType, and ospfv3CfgNbrAddress.
(37) Added object ospfv3VirtNbrIfIndex to Virtual Neighbor
entry. This is the interface index of the virtual link
over which the virtual neighbor is reached.
(38) Changed object name ospfVirtNbrIpAddr to
ospfv3VirtNbrAddress and SYNTAX from IpAddress to
InetAddress.
(39) Added object ospfv3VirtNbrAddressType to Virtual Neighbor
entry to determine the address type of
ospfv3VirtNbrAddress.
(40) Added object ospfv3VirtNbrIfId to Virtual Neighbor entry.
This is the virtual neighbor's local virtual interface
index from the neighbor's hellos advertised on the
virtual link.
(41) Changed object name ospfAreaAggregateMask to
ospfv3AreaAggregatePrefixLenth and SYNTAX from IpAddress
to InetAddressPrefixLength.
(42) Changed object name ospfAreaAggregateNet to
ospfv3AreaAggregatePrefix and SYNTAX from IpAddress to
InetAddress.
(43) Added object ospfv3AreaAggregatePrefixType to Area
Aggregate entry to determine the address type of
ospfv3AreaAggregatePrefix.
(44) Index for Area Aggregate Table entry changed from
ospfAreaAggregateAreaID, ospfAreaAggregateLsdbType,
ospfAreaAggregateNet, ospfAreaAggregateMask to
ospfv3AreaAggregateAreaID,
ospfv3AreaAggregateAreaLsdbType,
ospfv3AreaAggregatePrefixType, ospfv3AreaAggregatePrefix,
ospfv3AreaAggregatePrefixLength.
(45) Conformance information is changed to reflect object
groups removed or added.
(46) OSPFv3 traps are not defined.
(47) Added UNITS clause for the following objects:
ospfv3ExitOverflowInterval,
ospfv3AreaNssaTranslatorStabilityInterval,
ospfv3AsLsdbAge, ospfv3AreaLsdbAge, ospfv3LinkLsdbAge,
ospfv3IfTransitDelay, ospfv3IfRetransInterval,
ospfv3IfHelloInterval, ospfv3IfRtrDeadInterval,
ospfv3IfPollInterval, ospfv3VirtIfTransitDelay,
ospfv3VirtIfRetransInterval, ospfv3VirtIfHelloInterval,
ospfv3VirtIfRtrDeadInterval.
(48) Changed SYNTAX from PositiveInteger to Unsigned32 for
the following objects: ospfv3ExitOverflowInterval,
ospfv3IfRtrDeadInterval, ospfv3IfPollInterval,
ospfv3VirtIfRtrDeadInterval.
(49) Changed MAX-ACCESS of row indices from read-only to
not-accessible.
(50) Added a new object ospfv3ExtLsaCount for support of RFC1765.
(51) Compiled cleanly the MIB using "smilint -m -s -l 9 -i
namelength-32".
(52) Removed LSA type enumerations from the LSDB tables, but
ranges added as required by compiler.
(53) Added object to LSDB tables to check if the LSA is locally
originated.
(54) Add External Route Tag to AreaAggregate Table for NSSA.
(55) Added Object for OSPFv3 Reference bandwidth.
(56) Graceful restart objects to general group.
(57) Graceful restart Objects to NBR MIBS.
(58) ospfv3AreaSummary default value has been changed to import
summary LSA's in line with RFC3101.
(59) Added support for inactive neighbor probing support over DC.
(60) Removed ospfv3HostAddressType and ospfv3CfgNbrAddressType
from the compliance module to get compiler over warnings.
The information is already there in the description.
(61) Changed description of ospfv3IfMetricValue to also refer
to the new Reference Bandwidth general group object.
(62) Added Table of contents.
(63) Added a section for contributor's address and added authors
of previous versions to that section.
(64) Changed working group mail address.
(65) Added a new TEXTUAL-CONVENTION Ospfv3UpToRefreshIntervalTc.
(66) Changed RestartAge, RestartInterval, TransitDelay,
RetransmitInterval in all MIBs to be of the syntax
Ospfv3UpToRefreshIntervalTc.
(67) Defined a new texual convention for Router Dead Range.
(68) Changed syntax for all router dead intervals accordingly.
(69) Added OSPFv3AreaStubMetricType object.
(70) Changed names ospfv3SpfRuns =>> ospfv3AreaSpfRuns and
ospfv3StubMetric =>> ospfv3AreaStubMetric.
(71) Clarified description of ospfv3AreaAggregateRouteTag.
(72) Added a new Textual convention for Ospfv3RouterIdTc and
replaced all uses of RouterID with this new TC, based on
Keith's feedback.
(73) Removed all references to Site-Local Addresses, as they will
soon be deprecated.
(74) Used AS-External-LSA's instead of Type-5 and NSSA-LSA's
instead of Type-7.
(75) For ospfv3NbrRtrId and ospfv3CfgNbrRtrId removed description
referring to IP Address.
(76) Removed ospfv3TrafficEngineeringSupport to be consistent
with OSPFv2.
(77) Create new TC Ospfv3AreaIdTc with syntax Unsigned32 to
replace AreaID TC. Remove IMPORT of AreaID.
(78) LSID syntax changed from ipAddress to Unsigned32.
(79) Added Notifications
13. Full Copyright Statement 13. Full Copyright Statement
Copyright (C) The Internet Society (2006). Copyright (C) The IETF Trust (2007).
This document is subject to the rights, licenses and restrictions This document is subject to the rights, licenses and restrictions
contained in BCP 78, and except as set forth therein, the authors contained in BCP 78, and except as set forth therein, the authors
retain all their rights. retain all their rights.
This document and the information contained herein are provided on an This document and the information contained herein are provided
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE
ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, IETF TRUST AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL
INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY
INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE.
14. Intellectual Property 14. Intellectual Property
The IETF takes no position regarding the validity or scope of any The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to Intellectual Property Rights or other rights that might be
pertain to the implementation or use of the technology described in claimed to pertain to the implementation or use of the technology
this document or the extent to which any license under such rights described in this document or the extent to which any license
might or might not be available; nor does it represent that it has under such rights might or might not be available; nor does it
made any independent effort to identify any such rights. Information represent that it has made any independent effort to identify any
on the procedures with respect to rights in RFC documents can be such rights. Information on the procedures with respect to
found in BCP 78 and BCP 79. rights in RFC documents can be found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of attempt made to obtain a general license or permission for the
such proprietary rights by implementers or users of this use of such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at specification can be obtained from the IETF on-line IPR
http://www.ietf.org/ipr. repository at http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any The IETF invites any interested party to bring to its attention
copyrights, patents or patent applications, or other proprietary any copyrights, patents or patent applications, or other
rights that may cover technology that may be required to implement proprietary rights that may cover technology that may be required
this standard. Please address the information to the IETF at to implement this standard. Please address the information to the
ietf-ipr@ietf.org. IETF at ietf-ipr@ietf.org.
 End of changes. 192 change blocks. 
640 lines changed or deleted 801 lines changed or added

This html diff was produced by rfcdiff 1.34. The latest version is available from http://tools.ietf.org/tools/rfcdiff/