draft-ietf-ospf-ospfv3-mib-07.txt   draft-ietf-ospf-ospfv3-mib-08.txt 
Network Working Group Dan Joyal Network Working Group Dan Joyal
Internet Draft Nortel Networks Internet Draft Nortel Networks
Vishwas Manral Vishwas Manral
Motorola Inc SiNett
Expires: January 2004 Expires: October 2004
Management Information Base for OSPFv3 Management Information Base for OSPFv3
Status of this Memo Status of this Memo
This document is an Internet-Draft and is in full conformance with This document is an Internet-Draft and is in full conformance with
all provisions of Section 10 of RFC2026. all provisions of Section 10 of RFC2026.
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as Internet- other groups may also distribute working documents as Internet-
Drafts. Drafts.
Internet-Drafts are draft documents valid for a maximum of six Internet-Drafts are draft documents valid for a maximum of six
months and may be updated, replaced, or obsoleted by other months and may be updated, replaced, or obsoleted by other
skipping to change at page 2, line ? skipping to change at page 1, line 48
Abstract Abstract
This memo defines a portion of the Management Information Base (MIB) This memo defines a portion of the Management Information Base (MIB)
for use with network management protocols in IPv6-based internets. In for use with network management protocols in IPv6-based internets. In
particular, it defines objects for managing the Open Shortest Path particular, it defines objects for managing the Open Shortest Path
First Routing Protocol for IPv6. First Routing Protocol for IPv6.
Please send comments to ospf@peach.ease.lsoft.com. Please send comments to ospf@peach.ease.lsoft.com.
Contents Table of Contents
1. The SNMP Management Framework ...............................2
2. Overview.....................................................3
Internet Draft Expires January 2004 1 1. The SNMP Management Framework..................................2
2.1. IPv6 Interfaces............................................3 2. Overview.......................................................3
2.2. Addressing Semantics ......................................4 2.1 IPv6 Interfaces..............................................3
2.3. Authentication.............................................4 2.2 Addressing Semantics.........................................4
2.4. Type of Service............................................4 2.3 Authentication...............................................4
2.5. Flooding Scope.............................................4 2.4 Type of Service..............................................4
2.6. Virtual Links..............................................4 2.5 Flooding Scope...............................................4
2.7. Neighbors..................................................5 2.6 Virtual Links................................................4
3. Structure of the OSPFv3 MIB .................................5 2.7 Neighbors....................................................5
3.1. General Variables..........................................5 3. Structure of the OSPFv3 MIB....................................5
3.2. Area Table.................................................5 3.1 General Variables............................................5
3.3. Area-Scope, Link-Scope and AS-Scope Link State Database....5 3.2 Area Table...................................................5
3.4. Host Table.................................................5 3.3 Area-Scope, Link-Scope and AS-Scope Link State Database......5
3.5. Interface Table............................................5 3.4 Host Table...................................................5
3.6. Virtual Interface Table ...................................6 3.5 Interface Table..............................................5
3.7. Neighbor, NBMA Neighbor and Virtual Neighbor Tables........6 3.6 Virtual Interface Table......................................6
3.8. Aggregate Range Table .....................................6 3.7 Neighbor, NBMA Neighbor and Virtual Neighbor Tables..........6
4. Definitions..................................................6 3.8 Aggregate Range Table........................................6
5. Acknowledgements............................................57 4. Definitions....................................................6
6. References..................................................58 5. Acknowledgements..............................................58
7. Security Considerations ....................................59 6. References....................................................58
8. ContributorÆs Addresses ....................................60 7. Security Considerations.......................................60
9. Authors' Addresses..........................................60 8. Contributors' Addresses.......................................60
A. Differences from RFC 1850...................................60 9. Authors' Addresses............................................60
Full Copyright Statement ......................................65 A. Differences from RFC 1850.....................................61
B. Full Copyright Statement......................................66
1. The SNMP Management Framework 1. The SNMP Management Framework
The SNMP Management Framework presently consists of five major The SNMP Management Framework presently consists of five major
components: components:
o An overall architecture, described in RFC 2571 [1]. o An overall architecture, described in RFC 2571 [1].
o Mechanisms for describing and naming objects and events o Mechanisms for describing and naming objects and events
for the purpose of management. The first version of this for the purpose of management. The first version of this
skipping to change at page 6, line 38 skipping to change at page 6, line 41
FROM SNMPv2-CONF FROM SNMPv2-CONF
InterfaceIndex InterfaceIndex
FROM IF-MIB FROM IF-MIB
InetAddressType, InetAddress, InetAddressPrefixLength InetAddressType, InetAddress, InetAddressPrefixLength
FROM INET-ADDRESS-MIB FROM INET-ADDRESS-MIB
AreaID, RouterID, Metric, BigMetric, Status, AreaID, RouterID, Metric, BigMetric, Status,
HelloRange, DesignatedRouterPriority HelloRange, DesignatedRouterPriority
FROM OSPF-MIB; FROM OSPF-MIB;
ospfv3MIB MODULE-IDENTITY ospfv3MIB MODULE-IDENTITY
LAST-UPDATED "200304061200Z" LAST-UPDATED "200404081200Z"
ORGANIZATION "IETF OSPF Working Group" ORGANIZATION "IETF OSPF Working Group"
CONTACT-INFO CONTACT-INFO
"WG E-Mail: ospf@peach.ease.lsoft.com "WG E-Mail: ospf@peach.ease.lsoft.com
WG Chairs: John.Moy@sycamorenet.com WG Chairs: John.Moy@sycamorenet.com
acee@redback.com acee@redback.com
rohit@xebeo.com rohit@xebeo.com
Dan Joyal Dan Joyal
Nortel Networks Nortel Networks
600 Technology Park Drive 600 Technology Park Drive
Billerica, MA 01821, USA Billerica, MA 01821, USA
djoyal@nortelnetworks.com djoyal@nortelnetworks.com
Vishwas Manral Vishwas Manral
Motorola Inc. SiNett Corporation
2/1, First Floor
189, Prashasan Nagar Embassy Icon Annex
Road Number 72 Infantry Road
Jubilee Hills Bangalore 560001
Hyderabad, India vishwas@sinett.com"
vishwas@motorola.com ææ
DESCRIPTION DESCRIPTION
"The MIB module to describe OSPF version 3" "The MIB module to describe OSPF version 3"
REVISION "200304061200Z" REVISION "200404081200Z"
DESCRIPTION -- RFC Editor assigns RFC xxxx DESCRIPTION -- RFC Editor assigns RFC xxxx
"Initial version, published as RFC xxxx" "Initial version, published as RFC xxxx"
::= { mib-2 xx } -- IANA assigns xx ::= { mib-2 xx } -- IANA assigns xx
-- Texual conventions -- Texual conventions
UpToRefreshInterval ::= TEXTUAL-CONVENTION UpToRefreshInterval ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
ææThe values one might be able to configure for "The values one might be able to configure for
variables bounded by the Refresh Interval ÆÆ variables bounded by the Refresh Interval"
SYNTAX Integer32 (1..1800) SYNTAX Integer32 (1..1800)
RouterDeadRange ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The range of intervals in seconds that a routers hello
must have not been seen before a neighbor declares the
router down"
SYNTAX Integer32 (1..ÆFFFFÆh)
-- Top-level structure of MIB -- Top-level structure of MIB
ospfv3Objects OBJECT IDENTIFIER ::= { ospfv3MIB 1 } ospfv3Objects OBJECT IDENTIFIER ::= { ospfv3MIB 1 }
ospfv3Conformance OBJECT IDENTIFIER ::= { ospfv3MIB 2 } ospfv3Conformance OBJECT IDENTIFIER ::= { ospfv3MIB 2 }
-- OSPFv3 General Variables -- OSPFv3 General Variables
-- These parameters apply globally to the Router's -- These parameters apply globally to the Router's
-- OSPFv3 Process. -- OSPFv3 Process.
ospfv3GeneralGroup OBJECT IDENTIFIER ::= { ospfv3Objects 1 } ospfv3GeneralGroup OBJECT IDENTIFIER ::= { ospfv3Objects 1 }
skipping to change at page 13, line 36 skipping to change at page 13, line 42
ters and cumulative statistics of one of the ters and cumulative statistics of one of the
router's attached areas." router's attached areas."
INDEX { ospfv3AreaId } INDEX { ospfv3AreaId }
::= { ospfv3AreaTable 1 } ::= { ospfv3AreaTable 1 }
Ospfv3AreaEntry ::= SEQUENCE { Ospfv3AreaEntry ::= SEQUENCE {
ospfv3AreaId ospfv3AreaId
AreaID, AreaID,
ospfv3ImportAsExtern ospfv3ImportAsExtern
INTEGER, INTEGER,
ospfv3SpfRuns ospfv3AreaSpfRuns
Counter32, Counter32,
ospfv3AreaBdrRtrCount ospfv3AreaBdrRtrCount
Gauge32, Gauge32,
ospfv3AsBdrRtrCount ospfv3AreaAsBdrRtrCount
Gauge32, Gauge32,
ospfv3AreaScopeLsaCount ospfv3AreaScopeLsaCount
Gauge32, Gauge32,
ospfv3AreaScopeLsaCksumSum ospfv3AreaScopeLsaCksumSum
Integer32, Integer32,
ospfv3AreaSummary ospfv3AreaSummary
INTEGER, INTEGER,
ospfv3AreaStatus ospfv3AreaStatus
RowStatus, RowStatus,
ospfv3StubMetric ospfv3StubMetric
BigMetric, BigMetric,
ospfv3AreaNssaTranslatorRole ospfv3AreaNssaTranslatorRole
INTEGER, INTEGER,
ospfv3AreaNssaTranslatorState ospfv3AreaNssaTranslatorState
INTEGER, INTEGER,
ospfv3AreaNssaTranslatorStabilityInterval ospfv3AreaNssaTranslatorStabilityInterval
Unsigned32, Unsigned32,
ospfv3AreaNssaTranslatorEvents ospfv3AreaNssaTranslatorEvents
Counter32 Counter32,
ospfv3AreaStubMetricType
INTEGER
} }
ospfv3AreaId OBJECT-TYPE ospfv3AreaId OBJECT-TYPE
SYNTAX AreaID SYNTAX AreaID
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A 32-bit integer uniquely identifying an area. "A 32-bit integer uniquely identifying an area.
Area ID 0.0.0.0 is used for the OSPFv3 backbone." Area ID 0.0.0.0 is used for the OSPFv3 backbone."
REFERENCE REFERENCE
skipping to change at page 14, line 38 skipping to change at page 14, line 47
DESCRIPTION DESCRIPTION
"Indicates whether an area is a Stub area, NSSA, or "Indicates whether an area is a Stub area, NSSA, or
standard area. AS-scope LSAs are not imported into Stub standard area. AS-scope LSAs are not imported into Stub
Areas or NSSAs. NSSAs import AS-External data as Type-7 Areas or NSSAs. NSSAs import AS-External data as Type-7
LSAs which have Area-scope" LSAs which have Area-scope"
REFERENCE REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters" "OSPF Version 2, Appendix C.2 Area parameters"
DEFVAL { importExternal } DEFVAL { importExternal }
::= { ospfv3AreaEntry 2 } ::= { ospfv3AreaEntry 2 }
ospfv3SpfRuns OBJECT-TYPE ospfv3AreaSpfRuns OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of times that the intra-area route "The number of times that the intra-area route
table has been calculated using this area's table has been calculated using this area's
link-state database. This is typically done link-state database. This is typically done
using Dijkstra's algorithm." using Dijkstra's algorithm."
::= { ospfv3AreaEntry 3 } ::= { ospfv3AreaEntry 3 }
ospfv3AreaBdrRtrCount OBJECT-TYPE ospfv3AreaBdrRtrCount OBJECT-TYPE
SYNTAX Gauge32 SYNTAX Gauge32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The total number of area border routers reach- "The total number of area border routers reach-
able within this area. This is initially zero, able within this area. This is initially zero,
and is calculated in each SPF Pass." and is calculated in each SPF Pass."
::= { ospfv3AreaEntry 4 } ::= { ospfv3AreaEntry 4 }
skipping to change at page 15, line 6 skipping to change at page 15, line 14
ospfv3AreaBdrRtrCount OBJECT-TYPE ospfv3AreaBdrRtrCount OBJECT-TYPE
SYNTAX Gauge32 SYNTAX Gauge32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The total number of area border routers reach- "The total number of area border routers reach-
able within this area. This is initially zero, able within this area. This is initially zero,
and is calculated in each SPF Pass." and is calculated in each SPF Pass."
::= { ospfv3AreaEntry 4 } ::= { ospfv3AreaEntry 4 }
ospfv3AsBdrRtrCount OBJECT-TYPE ospfv3AreaAsBdrRtrCount OBJECT-TYPE
SYNTAX Gauge32 SYNTAX Gauge32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The total number of Autonomous System border "The total number of Autonomous System border
routers reachable within this area. This is routers reachable within this area. This is
initially zero, and is calculated in each SPF initially zero, and is calculated in each SPF
Pass." Pass."
::= { ospfv3AreaEntry 5 } ::= { ospfv3AreaEntry 5 }
skipping to change at page 17, line 27 skipping to change at page 17, line 36
ospfv3AreaNssaTranslatorEvents OBJECT-TYPE ospfv3AreaNssaTranslatorEvents OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates the number of Translator State changes "Indicates the number of Translator State changes
that have occurred since the last boot-up." that have occurred since the last boot-up."
::= { ospfv3AreaEntry 14 } ::= { ospfv3AreaEntry 14 }
ospfv3AreaStubMetricType OBJECT-TYPE
SYNTAX INTEGER {
ospfv3Metric (1), -- OSPF Metric
comparableCost (2), -- external type 1
nonComparable (3) -- external type 2
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable displays the type of metric ad-
vertised as a default route."
DEFVAL { ospfv3Metric }
::= { ospfv3AreaEntry 15 }
-- OSPFv3 AS-Scope Link State Database -- OSPFv3 AS-Scope Link State Database
-- The Link State Database contains the AS-Scope Link State -- The Link State Database contains the AS-Scope Link State
-- Advertisements from throughout the areas that the -- Advertisements from throughout the areas that the
-- device is attached to. -- device is attached to.
ospfv3AsLsdbTable OBJECT-TYPE ospfv3AsLsdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3AsLsdbEntry SYNTAX SEQUENCE OF Ospfv3AsLsdbEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
skipping to change at page 25, line 32 skipping to change at page 25, line 56
number" number"
::= { ospfv3LinkLsdbEntry 5 } ::= { ospfv3LinkLsdbEntry 5 }
ospfv3LinkLsdbAge OBJECT-TYPE ospfv3LinkLsdbAge OBJECT-TYPE
SYNTAX Integer32 -- Should be 0..MaxAge SYNTAX Integer32 -- Should be 0..MaxAge
-- unless DoNotAge bit is set -- unless DoNotAge bit is set
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This field is the age of the link state adver- "This field is the age of the link state
tisement in seconds." advertisement in seconds."
REFERENCE REFERENCE
"OSPF Version 2, Section 12.1.1 LS age" "OSPF Version 2, Section 12.1.1 LS age"
::= { ospfv3LinkLsdbEntry 6 } ::= { ospfv3LinkLsdbEntry 6 }
ospfv3LinkLsdbChecksum OBJECT-TYPE ospfv3LinkLsdbChecksum OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This field is the checksum of the complete "This field is the checksum of the complete
skipping to change at page 26, line 17 skipping to change at page 26, line 40
DESCRIPTION DESCRIPTION
"The entire Link State Advertisement, including "The entire Link State Advertisement, including
its header." its header."
::= { ospfv3LinkLsdbEntry 8 } ::= { ospfv3LinkLsdbEntry 8 }
ospfv3LinkLsdbTypeKnown OBJECT-TYPE ospfv3LinkLsdbTypeKnown OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Is the LSA type recognized by this Router?" "Indicates whether the LSA type is recognized by this
Router."
::= { ospfv3LinkLsdbEntry 9 } ::= { ospfv3LinkLsdbEntry 9 }
-- OSPF Host Table -- OSPF Host Table
-- The Host/Metric Table indicates what hosts are directly -- The Host/Metric Table indicates what hosts are directly
-- attached to the Router, and what metrics and types of -- attached to the Router, and what metrics and types of
-- service should be advertised for them. -- service should be advertised for them.
ospfv3HostTable OBJECT-TYPE ospfv3HostTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3HostEntry SYNTAX SEQUENCE OF Ospfv3HostEntry
skipping to change at page 29, line 5 skipping to change at page 29, line 28
Status, Status,
ospfv3IfRtrPriority ospfv3IfRtrPriority
DesignatedRouterPriority, DesignatedRouterPriority,
ospfv3IfTransitDelay ospfv3IfTransitDelay
UpToRefreshInterval, UpToRefreshInterval,
ospfv3IfRetransInterval ospfv3IfRetransInterval
UpToRefreshInterval, UpToRefreshInterval,
ospfv3IfHelloInterval ospfv3IfHelloInterval
HelloRange, HelloRange,
ospfv3IfRtrDeadInterval ospfv3IfRtrDeadInterval
Unsigned32, RouterDeadRange,
ospfv3IfPollInterval ospfv3IfPollInterval
Unsigned32, Unsigned32,
ospfv3IfState ospfv3IfState
INTEGER, INTEGER,
ospfv3IfDesignatedRouter ospfv3IfDesignatedRouter
RouterID, RouterID,
ospfv3IfBackupDesignatedRouter ospfv3IfBackupDesignatedRouter
RouterID, RouterID,
ospfv3IfEvents ospfv3IfEvents
Counter32, Counter32,
skipping to change at page 31, line 33 skipping to change at page 32, line 4
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The length of time, in seconds, between the "The length of time, in seconds, between the
Hello packets that the router sends on the in- Hello packets that the router sends on the in-
terface. This value must be the same for all terface. This value must be the same for all
routers attached to a common network." routers attached to a common network."
DEFVAL { 10 } DEFVAL { 10 }
::= { ospfv3IfEntry 8 } ::= { ospfv3IfEntry 8 }
ospfv3IfRtrDeadInterval OBJECT-TYPE ospfv3IfRtrDeadInterval OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX RouterDeadRange
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of seconds that a router's Hello "The number of seconds that a router's Hello
packets have not been seen before it's neigh- packets have not been seen before it's neigh-
bors declare the router down. This should be bors declare the router down. This should be
some multiple of the Hello interval. This some multiple of the Hello interval. This
value must be the same for all routers attached value must be the same for all routers attached
to a common network." to a common network."
skipping to change at page 35, line 55 skipping to change at page 36, line 27
RouterID, RouterID,
ospfv3VirtIfIndex ospfv3VirtIfIndex
InterfaceIndex, InterfaceIndex,
ospfv3VirtIfTransitDelay ospfv3VirtIfTransitDelay
UpToRefreshInterval, UpToRefreshInterval,
ospfv3VirtIfRetransInterval ospfv3VirtIfRetransInterval
UpToRefreshInterval, UpToRefreshInterval,
ospfv3VirtIfHelloInterval ospfv3VirtIfHelloInterval
HelloRange, HelloRange,
ospfv3VirtIfRtrDeadInterval ospfv3VirtIfRtrDeadInterval
Unsigned32, RouterDeadRange,
ospfv3VirtIfState ospfv3VirtIfState
INTEGER, INTEGER,
ospfv3VirtIfEvents ospfv3VirtIfEvents
Counter32, Counter32,
ospfv3VirtIfStatus ospfv3VirtIfStatus
RowStatus, RowStatus,
ospfv3VirtIfLinkScopeLsaCount ospfv3VirtIfLinkScopeLsaCount
Gauge32, Gauge32,
ospfv3VirtIfLinkLsaCksumSum ospfv3VirtIfLinkLsaCksumSum
Integer32 Integer32
skipping to change at page 37, line 32 skipping to change at page 37, line 56
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The length of time, in seconds, between the "The length of time, in seconds, between the
Hello packets that the router sends on the in- Hello packets that the router sends on the in-
terface. This value must be the same for the terface. This value must be the same for the
virtual neighbor." virtual neighbor."
DEFVAL { 10 } DEFVAL { 10 }
::= { ospfv3VirtIfEntry 6 } ::= { ospfv3VirtIfEntry 6 }
ospfv3VirtIfRtrDeadInterval OBJECT-TYPE ospfv3VirtIfRtrDeadInterval OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX RouterDeadRange
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of seconds that a router's Hello "The number of seconds that a router's Hello
packets have not been seen before it's neigh- packets have not been seen before it's neigh-
bors declare the router down. This should be bors declare the router down. This should be
some multiple of the Hello interval. This some multiple of the Hello interval. This
value must be the same for the virtual neigh- value must be the same for the virtual neigh-
bor." bor."
skipping to change at page 52, line 26 skipping to change at page 52, line 50
vertiseMatching), or result in the prefix not vertiseMatching), or result in the prefix not
being advertised at all outside the area." being advertised at all outside the area."
DEFVAL { advertiseMatching } DEFVAL { advertiseMatching }
::= { ospfv3AreaAggregateEntry 8 } ::= { ospfv3AreaAggregateEntry 8 }
ospfv3AreaAggregateRouteTag OBJECT-TYPE ospfv3AreaAggregateRouteTag OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This tag is advertised in the summarized NSSA LSA "This tag is advertised only in the summarized
only" As-External LSA when summarizing from type-7 to
type-5."
DEFVAL { 0 } DEFVAL { 0 }
::= { ospfv3AreaAggregateEntry 9 } ::= { ospfv3AreaAggregateEntry 9 }
-- conformance information -- conformance information
ospfv3Groups OBJECT IDENTIFIER ::= { ospfv3Conformance 1 } ospfv3Groups OBJECT IDENTIFIER ::= { ospfv3Conformance 1 }
ospfv3Compliances OBJECT IDENTIFIER ::= { ospfv3Conformance 2 } ospfv3Compliances OBJECT IDENTIFIER ::= { ospfv3Conformance 2 }
-- compliance statements -- compliance statements
ospfv3Compliance MODULE-COMPLIANCE ospfv3Compliance MODULE-COMPLIANCE
STATUS current STATUS current
DESCRIPTION "The compliance statement " DESCRIPTION "The compliance statement "
skipping to change at page 54, line 16 skipping to change at page 54, line 40
ospfv3RestartExitReason ospfv3RestartExitReason
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"These objects are required for OSPFv3 systems." "These objects are required for OSPFv3 systems."
::= { ospfv3Groups 1 } ::= { ospfv3Groups 1 }
ospfv3AreaGroup OBJECT-GROUP ospfv3AreaGroup OBJECT-GROUP
OBJECTS { OBJECTS {
ospfv3ImportAsExtern, ospfv3ImportAsExtern,
ospfv3SpfRuns, ospfv3AreaSpfRuns,
ospfv3AreaBdrRtrCount, ospfv3AreaBdrRtrCount,
ospfv3AsBdrRtrCount, ospfv3AreaAsBdrRtrCount,
ospfv3AreaScopeLsaCount, ospfv3AreaScopeLsaCount,
ospfv3AreaScopeLsaCksumSum, ospfv3AreaScopeLsaCksumSum,
ospfv3AreaSummary, ospfv3AreaSummary,
ospfv3AreaStatus, ospfv3AreaStatus,
ospfv3StubMetric, ospfv3StubMetric,
ospfv3AreaNssaTranslatorRole, ospfv3AreaNssaTranslatorRole,
ospfv3AreaNssaTranslatorState, ospfv3AreaNssaTranslatorState,
ospfv3AreaNssaTranslatorStabilityInterval, ospfv3AreaNssaTranslatorStabilityInterval,
ospfv3AreaNssaTranslatorEvents ospfv3AreaNssaTranslatorEvents,
ospfv3AreaStubMetricType
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"These objects are required for OSPFv3 systems "These objects are required for OSPFv3 systems
supporting areas." supporting areas."
::= { ospfv3Groups 2 } ::= { ospfv3Groups 2 }
ospfv3AsLsdbGroup OBJECT-GROUP ospfv3AsLsdbGroup OBJECT-GROUP
OBJECTS { OBJECTS {
ospfv3AsLsdbSequence, ospfv3AsLsdbSequence,
skipping to change at page 58, line 6 skipping to change at page 58, line 31
::= { ospfv3Groups 12 } ::= { ospfv3Groups 12 }
END END
5. Acknowledgements 5. Acknowledgements
This document is based on the MIB for OSPF version 2 by Rob This document is based on the MIB for OSPF version 2 by Rob
Coltun and Fred Baker [18]. The authors would like to thank Coltun and Fred Baker [18]. The authors would like to thank
Toshiaki Takada for his insightful comments. Thanks to Ramachandran Toshiaki Takada for his insightful comments. Thanks to Ramachandran
Radhakrishnan, Harikrishna Golapalli and Mahesh Kurapati for their Radhakrishnan, Harikrishna Golapalli and Mahesh Kurapati for their
help. help. Thanks also to Acee Lindem, Manish Gupta and Vanitha N. for
pointing out problems with the draft.
6. References 6. References
[1] Harrington, D., Presuhn, R., and B. Wijnen, "An [1] Harrington, D., Presuhn, R., and B. Wijnen, "An
Architecture for Describing SNMP Management Frameworks", Architecture for Describing SNMP Management Frameworks",
[2] Rose, M., and K. McCloghrie, "Structure and [2] Rose, M., and K. McCloghrie, "Structure and
Identification of Management Information for TCP/IP-based Identification of Management Information for TCP/IP-based
[3] Rose, M., and K. McCloghrie, "Concise MIB Definitions", [3] Rose, M., and K. McCloghrie, "Concise MIB Definitions",
[4] M. Rose, "A Convention for Defining Traps for use with [4] M. Rose, "A Convention for Defining Traps for use with
[5] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., [5] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
skipping to change at page 60, line 31 skipping to change at page 61, line 9
9. Editors' Addresses 9. Editors' Addresses
Dan Joyal Dan Joyal
Nortel Networks Nortel Networks
600 Technology Park Drive 600 Technology Park Drive
Billerica, MA 01821 Billerica, MA 01821
Email: djoyal@nortelnetworks.com Email: djoyal@nortelnetworks.com
Vishwas Manral Vishwas Manral
Motorola Inc. SiNett Corporation
189, Prashasan Nagar 2/1, First Floor
Road Number 72 Embassy Icon Annex
Jubilee Hills Infantry Road
Hyderabad, India Bangalore 560001
Email: vishwas@motorola.com Email: vishwas@sinett.com
A. Differences from RFC 1850 A. Differences from RFC 1850
(1) Textual Conventions are imported from INET-ADDRESS-MIB, (1) Textual Conventions are imported from INET-ADDRESS-MIB,
IF-MIB and OSPF-MIB MIBs. IF-MIB and OSPF-MIB MIBs.
(2) The "ospf" prefix for entity names is changed to (2) The "ospf" prefix for entity names is changed to
"ospfv3". "ospfv3".
(3) General Group object name ospfVersionNumber is changed to (3) General Group object name ospfVersionNumber is changed to
skipping to change at page 65, line 18 skipping to change at page 65, line 44
of previous versions to that section. of previous versions to that section.
(64) Changed working group mail address. (64) Changed working group mail address.
(65) Added a new TEXTUAL-CONVENTION UpToRefreshInterval. (65) Added a new TEXTUAL-CONVENTION UpToRefreshInterval.
(66) Changed RestartAge, RestartInterval, TransitDelay, (66) Changed RestartAge, RestartInterval, TransitDelay,
RetransmitInterval in all MIBs to be of the syntax RetransmitInterval in all MIBs to be of the syntax
UpToRefreshInterval. UpToRefreshInterval.
Full Copyright Statement (67) Defined a new texual convention for Router Dead Range.
(68) Changed synax for all router dead intervals accordingly.
(69) Added OSPFv3AreaStubMetricType object.
(70) Changed names ospfv3SpfRuns =>> ospfv3AreaSpfRuns and
ospfv3StubMetric =>> ospfv3AreaStubMetric.
(71) Clarified description of ospfv3AreaAggregateRouteTag.
(72) Updated Author address.
(73) Updated Acknowledgements.
B. Full Copyright Statement
Copyright (C) The Internet Society (2001). All Rights Copyright (C) The Internet Society (2001). All Rights
Reserved. Reserved.
This document and translations of it may be copied and This document and translations of it may be copied and
furnished to others, and derivative works that comment on or furnished to others, and derivative works that comment on or
otherwise explain it or assist in its implementation may be otherwise explain it or assist in its implementation may be
prepared, copied, published and distributed, in whole or in prepared, copied, published and distributed, in whole or in
part, without restriction of any kind, provided that the above part, without restriction of any kind, provided that the above
copyright notice and this paragraph are included on all such copyright notice and this paragraph are included on all such
 End of changes. 32 change blocks. 
70 lines changed or deleted 108 lines changed or added

This html diff was produced by rfcdiff 1.34. The latest version is available from http://tools.ietf.org/tools/rfcdiff/