draft-ietf-ospf-ospfv3-mib-05.txt   draft-ietf-ospf-ospfv3-mib-06.txt 
Network Working Group Dan Joyal Network Working Group Dan Joyal
Internet Draft Lucent Internet Draft Nortel Networks
Vishwas Manral
Motorola Inc
Sebastian Zwolinski Sebastian Zwolinski
Jacek Kwiatkowski Jacek Kwiatkowski
Intel Intel
Expires: October 2002 Expires: October 2003
Management Information Base for OSPFv3 Management Information Base for OSPFv3
Status of this Memo Status of this Memo
This document is an Internet-Draft and is in full conformance with This document is an Internet-Draft and is in full conformance with
all provisions of Section 10 of RFC2026. all provisions of Section 10 of RFC2026.
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that Task Force (IETF), its areas, and its working groups. Note that
skipping to change at line 48 skipping to change at line 51
1. Abstract 1. Abstract
This memo defines a portion of the Management Information Base (MIB) This memo defines a portion of the Management Information Base (MIB)
for use with network management protocols in IPv6-based internets. In for use with network management protocols in IPv6-based internets. In
particular, it defines objects for managing the Open Shortest Path particular, it defines objects for managing the Open Shortest Path
First Routing Protocol for IPv6. First Routing Protocol for IPv6.
Please send comments to ospf@discuss.microsoft.com. Please send comments to ospf@discuss.microsoft.com.
Internet Draft Expires October 2003 1
2. The SNMP Management Framework 2. The SNMP Management Framework
Internet Draft Expires October 2002 1
The SNMP Management Framework presently consists of five major The SNMP Management Framework presently consists of five major
components: components:
o An overall architecture, described in RFC 2571 [1]. o An overall architecture, described in RFC 2571 [1].
o Mechanisms for describing and naming objects and events o Mechanisms for describing and naming objects and events
for the purpose of management. The first version of this for the purpose of management. The first version of this
Structure of Management Information (SMI) is called SMIv1 Structure of Management Information (SMI) is called SMIv1
and described in STD 16, RFC 1155 [2], STD 16, RFC 1212 and described in STD 16, RFC 1155 [2], STD 16, RFC 1212
[3] and RFC 1215 [4]. The second version, called SMIv2, [3] and RFC 1215 [4]. The second version, called SMIv2,
skipping to change at line 102 skipping to change at line 106
SMIv2. A MIB conforming to the SMIv1 can be produced through SMIv2. A MIB conforming to the SMIv1 can be produced through
the appropriate translations. The resulting translated MIB the appropriate translations. The resulting translated MIB
must be semantically equivalent, except where objects or must be semantically equivalent, except where objects or
events are omitted because no translation is possible (use of events are omitted because no translation is possible (use of
Counter64). Some machine readable information in SMIv2 will be Counter64). Some machine readable information in SMIv2 will be
converted into textual descriptions in SMIv1 during the converted into textual descriptions in SMIv1 during the
translation process. However, this loss of machine readable translation process. However, this loss of machine readable
information is not considered to change the semantics of the information is not considered to change the semantics of the
MIB. MIB.
Internet Draft Expires October 2002 2 Internet Draft Expires October 2003 2
3. Overview 3. Overview
This memo defines a portion of the Management Information Base (MIB) This memo defines a portion of the Management Information Base (MIB)
for managing the Open Shortest Path First Routing Protocol for IPv6, for managing the Open Shortest Path First Routing Protocol for IPv6,
otherwise known as OSPF version 3 (OSPFv3). Though the fundamental otherwise known as OSPF version 3 (OSPFv3). Though the fundamental
mechanisms of OSPF version 2 (OSPFv2) remain unchanged in OSPFv3, mechanisms of OSPF version 2 (OSPFv2) remain unchanged in OSPFv3,
some changes were necessary due to differences in IP address size and some changes were necessary due to differences in IP address size and
in protocol semantics between IPv4 and IPv6. In many cases, where the in protocol semantics between IPv4 and IPv6. In many cases, where the
protocol operations have not changed from OSPFv2, the specification protocol operations have not changed from OSPFv2, the specification
skipping to change at line 154 skipping to change at line 158
bits, therefore, they cannot be assigned IPv6 addresses. A router bits, therefore, they cannot be assigned IPv6 addresses. A router
running both IPv4 and IPv6 concurrently can continue to use a local running both IPv4 and IPv6 concurrently can continue to use a local
IPv4 interface address as the OSPFv3 router ID. Otherwise, the router IPv4 interface address as the OSPFv3 router ID. Otherwise, the router
ID must be selected using another method (e.g. administratively ID must be selected using another method (e.g. administratively
assigned). The Link State ID has no addressing semantics in OSPFv3. assigned). The Link State ID has no addressing semantics in OSPFv3.
The syntax of Router ID, Area ID and Link State ID remains the same The syntax of Router ID, Area ID and Link State ID remains the same
as in the OSPFv2 MIB(i.e. ipAddress). The order of the Router ID and as in the OSPFv2 MIB(i.e. ipAddress). The order of the Router ID and
Link State ID index components in Link State Database Tables are Link State ID index components in Link State Database Tables are
reversed in OSPFv3 since the lack of addressing semantics in Link reversed in OSPFv3 since the lack of addressing semantics in Link
State IDs make them less unique identifiers than the Router ID. It is
Internet Draft Expires October 2002 3 Internet Draft Expires October 2003 3
State IDs make them less unique identifiers than the Router ID. It is
more useful to do partial OID lookups extending to the Router ID more useful to do partial OID lookups extending to the Router ID
rather than the LSID. rather than the LSID.
3.3. Authentication 3.3. Authentication
In OSPFv3, authentication has been removed from the protocol itself. In OSPFv3, authentication has been removed from the protocol itself.
MIB objects related to authentication are not carried forward from MIB objects related to authentication are not carried forward from
the OSPFv2 MIB. the OSPFv2 MIB.
3.4. Type of Service 3.4. Type of Service
skipping to change at line 208 skipping to change at line 212
General Variables General Variables
Area Table Area Table
Area-Scope Link State Database Area-Scope Link State Database
Link-Scope Link State Database Link-Scope Link State Database
AS-Scope Link State Database AS-Scope Link State Database
Host Table Host Table
Interface Table Interface Table
Virtual Interface Table Virtual Interface Table
Neighbor Table Neighbor Table
NBMA Neighbor Table
Internet Draft Expires October 2002 4 Internet Draft Expires October 2003 4
NBMA Neighbor Table
Virtual Neighbor Table Virtual Neighbor Table
Aggregate Range Table Aggregate Range Table
4.1. General Variables 4.1. General Variables
The General Variables are global to the OSPFv3 Process. The General Variables are global to the OSPFv3 Process.
4.2. Area Table 4.2. Area Table
The Area Data Structure describes the OSPFv3 Areas that the The Area Data Structure describes the OSPFv3 Areas that the
skipping to change at line 261 skipping to change at line 265
5. Definitions 5. Definitions
OSPFV3-MIB DEFINITIONS ::= BEGIN OSPFV3-MIB DEFINITIONS ::= BEGIN
IMPORTS IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, mib-2, MODULE-IDENTITY, OBJECT-TYPE, mib-2,
Counter32, Gauge32, Integer32, IpAddress, Counter32, Gauge32, Integer32, IpAddress,
Unsigned32 Unsigned32
FROM SNMPv2-SMI FROM SNMPv2-SMI
TruthValue, StorageType, RowStatus
Internet Draft Expires October 2002 5 Internet Draft Expires October 2003 5
TruthValue, StorageType, RowStatus
FROM SNMPv2-TC FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF FROM SNMPv2-CONF
InterfaceIndex InterfaceIndex
FROM IF-MIB FROM IF-MIB
InetAddressType, InetAddress, InetAddressPrefixLength InetAddressType, InetAddress, InetAddressPrefixLength
FROM INET-ADDRESS-MIB FROM INET-ADDRESS-MIB
AreaID, RouterID, Metric, BigMetric, Status, AreaID, RouterID, Metric, BigMetric, Status,
HelloRange, UpToMaxAge, DesignatedRouterPriority HelloRange, UpToMaxAge, DesignatedRouterPriority
FROM OSPF-MIB; FROM OSPF-MIB;
ospfv3MIB MODULE-IDENTITY ospfv3MIB MODULE-IDENTITY
LAST-UPDATED "200204021200Z" LAST-UPDATED "200304061200Z"
ORGANIZATION "IETF OSPF Working Group" ORGANIZATION "IETF OSPF Working Group"
CONTACT-INFO CONTACT-INFO
"WG E-Mail: ospf@discuss.microsoft.com "WG E-Mail: ospf@discuss.microsoft.com
WG Chair : John.Moy@sycamorenet.com WG Chairs: John.Moy@sycamorenet.com
acee@redback.com
rohit@xebeo.com
Dan Joyal Dan Joyal
Lucent Technologies Nortel Networks
One Robbins Road 600 Technology Park Drive
Westford, MA 01886, USA Billerica, MA 01821, USA
joyal@lucent.com djoyal@nortelnetworks.com
Jacek Kwiatkowski Jacek Kwiatkowski
Intel Technology Poland Intel Technology Poland
ul. Slowackiego 173 ul. Slowackiego 173
80-298 Gdansk, Poland 80-298 Gdansk, Poland
jacek.kwiatkowski@intel.com jacek.kwiatkowski@intel.com
Vishwas Manral
Motorola Inc.
189, Prashasan Nagar
Road Number 72
Jubilee Hills
Hyderabad, India
vishwas@motorola.com
Sebastian Zwolinski Sebastian Zwolinski
Intel Technology Poland Intel Technology Poland
ul. Slowackiego 173 ul. Slowackiego 173
80-298 Gdansk, Poland 80-298 Gdansk, Poland
sebastian.zwolinski@intel.com" sebastian.zwolinski@intel.com"
DESCRIPTION DESCRIPTION
"The MIB module to describe OSPF version 3" "The MIB module to describe OSPF version 3"
REVISION "200204021200Z" REVISION "200304061200Z"
Internet Draft Expires October 2003 6
DESCRIPTION -- RFC Editor assigns RFC xxxx DESCRIPTION -- RFC Editor assigns RFC xxxx
"Initial version, published as RFC xxxx" "Initial version, published as RFC xxxx"
::= { mib-2 xx } -- IANA assigns xx ::= { mib-2 xx } -- IANA assigns xx
-- Top-level structure of MIB -- Top-level structure of MIB
ospfv3Objects OBJECT IDENTIFIER ::= { ospfv3MIB 1 } ospfv3Objects OBJECT IDENTIFIER ::= { ospfv3MIB 1 }
ospfv3Conformance OBJECT IDENTIFIER ::= { ospfv3MIB 2 } ospfv3Conformance OBJECT IDENTIFIER ::= { ospfv3MIB 2 }
-- OSPFv3 General Variables -- OSPFv3 General Variables
-- These parameters apply globally to the Router's -- These parameters apply globally to the Router's
-- OSPFv3 Process. -- OSPFv3 Process.
Internet Draft Expires October 2002 6
ospfv3GeneralGroup OBJECT IDENTIFIER ::= { ospfv3Objects 1 } ospfv3GeneralGroup OBJECT IDENTIFIER ::= { ospfv3Objects 1 }
ospfv3RouterId OBJECT-TYPE ospfv3RouterId OBJECT-TYPE
SYNTAX RouterID SYNTAX RouterID
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A 32-bit integer uniquely identifying the "A 32-bit integer uniquely identifying the
router in the Autonomous System. router in the Autonomous System.
To ensure uniqueness, this may To ensure uniqueness, this may
skipping to change at line 357 skipping to change at line 372
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The version number of OSPF for IPv6 is 3." "The version number of OSPF for IPv6 is 3."
::= { ospfv3GeneralGroup 3 } ::= { ospfv3GeneralGroup 3 }
ospfv3AreaBdrRtrStatus OBJECT-TYPE ospfv3AreaBdrRtrStatus OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
Internet Draft Expires October 2003 7
"A flag to note whether this router is an area "A flag to note whether this router is an area
border router." border router."
REFERENCE REFERENCE
"OSPF Version 2, Section 3 Splitting the AS into "OSPF Version 2, Section 3 Splitting the AS into
Areas" Areas"
::= { ospfv3GeneralGroup 4 } ::= { ospfv3GeneralGroup 4 }
ospfv3ASBdrRtrStatus OBJECT-TYPE ospfv3ASBdrRtrStatus OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
Internet Draft Expires October 2002 7
"A flag to note whether this router is config- "A flag to note whether this router is config-
ured as an Autonomous System border router." ured as an Autonomous System border router."
REFERENCE REFERENCE
"OSPF Version 2, Section 3.3 Classification of "OSPF Version 2, Section 3.3 Classification of
routers" routers"
::= { ospfv3GeneralGroup 5 } ::= { ospfv3GeneralGroup 5 }
ospfv3AsScopeLsaCount OBJECT-TYPE ospfv3AsScopeLsaCount OBJECT-TYPE
SYNTAX Gauge32 SYNTAX Gauge32
MAX-ACCESS read-only MAX-ACCESS read-only
skipping to change at line 412 skipping to change at line 427
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of new link-state advertisements "The number of new link-state advertisements
that have been originated. This number is in- that have been originated. This number is in-
cremented each time the router originates a new cremented each time the router originates a new
LSA." LSA."
::= { ospfv3GeneralGroup 8 } ::= { ospfv3GeneralGroup 8 }
Internet Draft Expires October 2003 8
ospfv3RxNewLsas OBJECT-TYPE ospfv3RxNewLsas OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of link-state advertisements re- "The number of link-state advertisements re-
ceived determined to be new instantiations. ceived determined to be new instantiations.
This number does not include newer instantia- This number does not include newer instantia-
tions of self-originated link-state advertise- tions of self-originated link-state advertise-
ments." ments."
::= { ospfv3GeneralGroup 9 } ::= { ospfv3GeneralGroup 9 }
Internet Draft Expires October 2002 8 ospfv3ExtLsaCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of External(LS type 0x4005) in the link-
state database"
::= { ospfv3GeneralGroup 10 }
ospfv3ExtAreaLsdbLimit OBJECT-TYPE ospfv3ExtAreaLsdbLimit OBJECT-TYPE
SYNTAX Integer32 (-1..'7FFFFFFF'h) SYNTAX Integer32 (-1..'7FFFFFFF'h)
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The maximum number of non-default AS- "The maximum number of non-default AS-
external-LSAs entries that can be stored in the external-LSAs entries that can be stored in the
link-state database. If the value is -1, then link-state database. If the value is -1, then
there is no limit. there is no limit.
When the number of non-default AS-external-LSAs When the number of non-default AS-external-LSAs
in a router's link-state database reaches in a router's link-state database reaches
ospfv3ExtAreaLsdbLimit, the router enters Overflow- ospfv3ExtAreaLsdbLimit, the router enters Overflow-
State. The router never holds more than State. The router never holds more than
ospfv3ExtAreaLsdbLimit non-default AS-external-LSAs ospfv3ExtAreaLsdbLimit non-default AS-external-LSAs
in its database. OspfExtAreaLsdbLimit MUST be set in its database. OspfExtAreaLsdbLimit MUST be set
identically in all routers attached to the OSPFv3 identically in all routers attached to the OSPFv3
backbone and/or any regular OSPFv3 area. (i.e., backbone and/or any regular OSPFv3 area. (i.e.,
OSPFv3 stub areas and NSSAs are excluded)." OSPFv3 stub areas and NSSAs are excluded)."
::= { ospfv3GeneralGroup 10 } ::= { ospfv3GeneralGroup 11 }
ospfv3MulticastExtensions OBJECT-TYPE ospfv3MulticastExtensions OBJECT-TYPE
SYNTAX BITS { SYNTAX BITS {
intraAreaMulticast(0), intraAreaMulticast(0),
interAreaMulticast(1), interAreaMulticast(1),
interAsMulticast(2) interAsMulticast(2)
} }
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
Internet Draft Expires October 2003 9
"A Bit Mask indicating whether the router is "A Bit Mask indicating whether the router is
forwarding IPv6 multicast datagrams forwarding IPv6 multicast datagrams
based on the algorithms defined in the Multi- based on the algorithms defined in the Multi-
cast Extensions to OSPF. cast Extensions to OSPF.
If intraAreaMulticast set, indicates that the router If intraAreaMulticast set, indicates that the router
can forward IPv6 multicast datagrams in the router's can forward IPv6 multicast datagrams in the router's
directly attached areas (called intra-area mul- directly attached areas (called intra-area mul-
ticast routing). ticast routing).
skipping to change at line 478 skipping to change at line 504
areas (called inter-area multicast routing). areas (called inter-area multicast routing).
If interAsMulticast set, indicates that the router can If interAsMulticast set, indicates that the router can
forward IPv6 multicast datagrams between Auto- forward IPv6 multicast datagrams between Auto-
nomous Systems (called inter-AS multicast rout- nomous Systems (called inter-AS multicast rout-
ing). ing).
Only certain combinations of bit settings are Only certain combinations of bit settings are
allowed, namely: allowed, namely:
- All bits cleared (no multicasting) - All bits cleared (no multicasting)
Internet Draft Expires October 2002 9
- intraAreaMulticast only, - intraAreaMulticast only,
- intraAreaMulticast and interAreaMulticast, - intraAreaMulticast and interAreaMulticast,
- intraAreaMulticast and interAsMulticast - intraAreaMulticast and interAsMulticast
- intraAreaMulticast, interAreaMulticast and - intraAreaMulticast, interAreaMulticast and
interAsMulticast interAsMulticast
By default, all bits are cleared." By default, all bits are cleared."
::= { ospfv3GeneralGroup 11 } ::= { ospfv3GeneralGroup 12 }
ospfv3ExitOverflowInterval OBJECT-TYPE ospfv3ExitOverflowInterval OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of seconds that, after entering "The number of seconds that, after entering
OverflowState, a router will attempt to leave OverflowState, a router will attempt to leave
OverflowState. This allows the router to again OverflowState. This allows the router to again
originate non-default AS-External-LSAs. When originate non-default AS-External-LSAs. When
set to 0, the router will not leave Overflow- set to 0, the router will not leave Overflow-
State until restarted." State until restarted."
::= { ospfv3GeneralGroup 12 } ::= { ospfv3GeneralGroup 13 }
ospfv3DemandExtensions OBJECT-TYPE ospfv3DemandExtensions OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The router's support for demand routing." "The router's support for demand routing."
REFERENCE REFERENCE
"OSPF Version 2, Appendix on Demand Routing" "OSPF Version 2, Appendix on Demand Routing"
::= { ospfv3GeneralGroup 13 } ::= { ospfv3GeneralGroup 14 }
Internet Draft Expires October 2003 10
ospfv3TrafficEngineeringSupport OBJECT-TYPE ospfv3TrafficEngineeringSupport OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The router's support for traffic engineering "The router's support for traffic engineering
extensions." extensions."
::= { ospfv3GeneralGroup 14 } ::= { ospfv3GeneralGroup 15 }
ospfv3ReferenceBandwidth OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reference bandwidth in kilobits/second for
calculating default interface metrics. The
default value is 100,000 KBPS (100 MBPS)"
::= { ospfv3GeneralGroup 16 }
ospfv3RestartSupport OBJECT-TYPE
SYNTAX INTEGER { none (1),
plannedOnly (2),
plannedAndUnplanned (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The router's support for OSPF hitless restart.
Options include: no restart support, only planned
restarts or both planned and unplanned restarts."
::= { ospfv3GeneralGroup 17 }
ospfv3RestartInterval OBJECT-TYPE
SYNTAX Integer32 (0..1800)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configured OSPF hitless restart timeout interval."
::= { ospfv3GeneralGroup 18 }
ospfv3RestartStatus OBJECT-TYPE
SYNTAX INTEGER { notRestarting (1),
plannedRestart (2),
unplannedRestart (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current status of OSPF hitless restart."
::= { ospfv3GeneralGroup 19 }
Internet Draft Expires October 2003 11
ospfv3RestartAge OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remaining time in current OSPF hitless restart
interval."
::= { ospfv3GeneralGroup 20 }
ospfv3RestartExitReason OBJECT-TYPE
SYNTAX INTEGER { none (1), -- none attempted
inProgress (2), -- restart in
-- progress
completed (3), -- successfully
-- completed
timedOut (4), -- timed out
topologyChanged (5) -- aborted due to
-- topologychange.
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the outcome of the last attempt at a
hitless restart. If the value is 'none', no restart
has yet been attempted. If the value is 'inProgress',
a restart attempt is currently underway."
::= { ospfv3GeneralGroup 21 }
-- The OSPFv3 Area Data Structure contains information -- The OSPFv3 Area Data Structure contains information
-- regarding the various areas. The interfaces and -- regarding the various areas. The interfaces and
-- virtual links are configured as part of these areas. -- virtual links are configured as part of these areas.
-- Area 0.0.0.0, by definition, is the Backbone Area -- Area 0.0.0.0, by definition, is the Backbone Area
ospfv3AreaTable OBJECT-TYPE ospfv3AreaTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3AreaEntry SYNTAX SEQUENCE OF Ospfv3AreaEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Information describing the configured parame- "Information describing the configured parame-
ters and cumulative statistics of the router's ters and cumulative statistics of the router's
Internet Draft Expires October 2002 10
attached areas." attached areas."
REFERENCE REFERENCE
"OSPF Version 2, Section 6 The Area Data Struc- "OSPF Version 2, Section 6 The Area Data Struc-
ture" ture"
::= { ospfv3Objects 2 } ::= { ospfv3Objects 2 }
ospfv3AreaEntry OBJECT-TYPE ospfv3AreaEntry OBJECT-TYPE
SYNTAX Ospfv3AreaEntry SYNTAX Ospfv3AreaEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
Internet Draft Expires October 2003 12
"Information describing the configured parame- "Information describing the configured parame-
ters and cumulative statistics of one of the ters and cumulative statistics of one of the
router's attached areas." router's attached areas."
INDEX { ospfv3AreaId } INDEX { ospfv3AreaId }
::= { ospfv3AreaTable 1 } ::= { ospfv3AreaTable 1 }
Ospfv3AreaEntry ::= SEQUENCE { Ospfv3AreaEntry ::= SEQUENCE {
ospfv3AreaId ospfv3AreaId
AreaID, AreaID,
ospfv3ImportAsExtern ospfv3ImportAsExtern
skipping to change at line 588 skipping to change at line 686
Unsigned32, Unsigned32,
ospfv3AreaNssaTranslatorEvents ospfv3AreaNssaTranslatorEvents
Counter32 Counter32
} }
ospfv3AreaId OBJECT-TYPE ospfv3AreaId OBJECT-TYPE
SYNTAX AreaID SYNTAX AreaID
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
Internet Draft Expires October 2002 11
"A 32-bit integer uniquely identifying an area. "A 32-bit integer uniquely identifying an area.
Area ID 0.0.0.0 is used for the OSPFv3 backbone." Area ID 0.0.0.0 is used for the OSPFv3 backbone."
REFERENCE REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters" "OSPF Version 2, Appendix C.2 Area parameters"
::= { ospfv3AreaEntry 1 } ::= { ospfv3AreaEntry 1 }
ospfv3ImportAsExtern OBJECT-TYPE ospfv3ImportAsExtern OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
importExternal(1), -- normal area importExternal(1), -- normal area
importNoExternal(2), -- stub area importNoExternal(2), -- stub area
importNssa(3) -- not-so-stubby-area importNssa(3) -- not-so-stubby-area
Internet Draft Expires October 2003 13
} }
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates whether an area is a Stub area, NSSA, or "Indicates whether an area is a Stub area, NSSA, or
standard area. AS-scope LSAs are not imported into Stub standard area. AS-scope LSAs are not imported into Stub
Areas or NSSAs. NSSAs import AS-External data as Type-7 Areas or NSSAs. NSSAs import AS-External data as Type-7
LSAs which have Area-scope" LSAs which have Area-scope"
REFERENCE REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters" "OSPF Version 2, Appendix C.2 Area parameters"
skipping to change at line 643 skipping to change at line 741
::= { ospfv3AreaEntry 4 } ::= { ospfv3AreaEntry 4 }
ospfv3AsBdrRtrCount OBJECT-TYPE ospfv3AsBdrRtrCount OBJECT-TYPE
SYNTAX Gauge32 SYNTAX Gauge32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The total number of Autonomous System border "The total number of Autonomous System border
routers reachable within this area. This is routers reachable within this area. This is
initially zero, and is calculated in each SPF initially zero, and is calculated in each SPF
Internet Draft Expires October 2002 12
Pass." Pass."
::= { ospfv3AreaEntry 5 } ::= { ospfv3AreaEntry 5 }
ospfv3AreaScopeLsaCount OBJECT-TYPE ospfv3AreaScopeLsaCount OBJECT-TYPE
SYNTAX Gauge32 SYNTAX Gauge32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The total number of Area-Scope link-state "The total number of Area-Scope link-state
advertisements in this area's link-state advertisements in this area's link-state
database." database."
Internet Draft Expires October 2003 14
::= { ospfv3AreaEntry 6 } ::= { ospfv3AreaEntry 6 }
ospfv3AreaScopeLsaCksumSum OBJECT-TYPE ospfv3AreaScopeLsaCksumSum OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The 32-bit unsigned sum of the Area-Scope link-state "The 32-bit unsigned sum of the Area-Scope link-state
advertisements' LS checksums contained in this advertisements' LS checksums contained in this
area's link-state database. The sum can be used area's link-state database. The sum can be used
skipping to change at line 690 skipping to change at line 788
port of Inter-Area LSAs into stub areas. It has port of Inter-Area LSAs into stub areas. It has
no effect on other areas. no effect on other areas.
If it is noAreaSummary, the router will neither If it is noAreaSummary, the router will neither
originate nor propagate Inter-Area LSAs into the originate nor propagate Inter-Area LSAs into the
stub area. It will rely entirely on its de- stub area. It will rely entirely on its de-
fault route. fault route.
If it is sendAreaSummary, the router will both If it is sendAreaSummary, the router will both
summarize and propagate Inter-Area LSAs." summarize and propagate Inter-Area LSAs."
DEFVAL { noAreaSummary } DEFVAL { sendAreaSummary }
::= { ospfv3AreaEntry 8 } ::= { ospfv3AreaEntry 8 }
ospfv3AreaStatus OBJECT-TYPE ospfv3AreaStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
Internet Draft Expires October 2002 13
"This variable controls the status of the en- "This variable controls the status of the en-
try. The use of RowStatus is covered in more detail try. The use of RowStatus is covered in more detail
in [6]." in [6]."
::= { ospfv3AreaEntry 9 } ::= { ospfv3AreaEntry 9 }
ospfv3StubMetric OBJECT-TYPE ospfv3StubMetric OBJECT-TYPE
SYNTAX BigMetric SYNTAX BigMetric
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The metric value advertised for the default route "The metric value advertised for the default route
Internet Draft Expires October 2003 15
into Stub and NSSA areas." into Stub and NSSA areas."
::= { ospfv3AreaEntry 10 } ::= { ospfv3AreaEntry 10 }
ospfv3AreaNssaTranslatorRole OBJECT-TYPE ospfv3AreaNssaTranslatorRole OBJECT-TYPE
SYNTAX INTEGER { always(1), candidate(2) } SYNTAX INTEGER { always(1), candidate(2) }
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates an NSSA Border router's ability to "Indicates an NSSA Border router's ability to
perform NSSA translation of type-7 LSAs into perform NSSA translation of type-7 LSAs into
skipping to change at line 753 skipping to change at line 851
::= { ospfv3AreaEntry 12 } ::= { ospfv3AreaEntry 12 }
ospfv3AreaNssaTranslatorStabilityInterval OBJECT-TYPE ospfv3AreaNssaTranslatorStabilityInterval OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of seconds after an elected translator "The number of seconds after an elected translator
determines its services are no longer required, that determines its services are no longer required, that
Internet Draft Expires October 2002 14
it should continue to perform its translation duties." it should continue to perform its translation duties."
DEFVAL { 40 } DEFVAL { 40 }
::= { ospfv3AreaEntry 13 } ::= { ospfv3AreaEntry 13 }
ospfv3AreaNssaTranslatorEvents OBJECT-TYPE ospfv3AreaNssaTranslatorEvents OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates the number of Translator State changes "Indicates the number of Translator State changes
that have occurred since the last boot-up." that have occurred since the last boot-up."
Internet Draft Expires October 2003 16
::= { ospfv3AreaEntry 14 } ::= { ospfv3AreaEntry 14 }
-- OSPFv3 AS-Scope Link State Database -- OSPFv3 AS-Scope Link State Database
-- The Link State Database contains the AS-Scope Link State -- The Link State Database contains the AS-Scope Link State
-- Advertisements from throughout the areas that the -- Advertisements from throughout the areas that the
-- device is attached to. -- device is attached to.
ospfv3AsLsdbTable OBJECT-TYPE ospfv3AsLsdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3AsLsdbEntry SYNTAX SEQUENCE OF Ospfv3AsLsdbEntry
skipping to change at line 795 skipping to change at line 893
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A single AS-Scope Link State Advertisement." "A single AS-Scope Link State Advertisement."
INDEX { ospfv3AsLsdbType, INDEX { ospfv3AsLsdbType,
ospfv3AsLsdbRouterId, ospfv3AsLsdbRouterId,
ospfv3AsLsdbLsid } ospfv3AsLsdbLsid }
::= { ospfv3AsLsdbTable 1 } ::= { ospfv3AsLsdbTable 1 }
Ospfv3AsLsdbEntry ::= SEQUENCE { Ospfv3AsLsdbEntry ::= SEQUENCE {
ospfv3AsLsdbType ospfv3AsLsdbType
INTEGER, Unsigned32,
ospfv3AsLsdbRouterId ospfv3AsLsdbRouterId
RouterID, RouterID,
ospfv3AsLsdbLsid ospfv3AsLsdbLsid
IpAddress, IpAddress,
ospfv3AsLsdbSequence ospfv3AsLsdbSequence
Integer32, Integer32,
ospfv3AsLsdbAge ospfv3AsLsdbAge
Integer32, Integer32,
ospfv3AsLsdbChecksum ospfv3AsLsdbChecksum
Integer32, Integer32,
ospfv3AsLsdbAdvertisement ospfv3AsLsdbAdvertisement
OCTET STRING OCTET STRING,
ospfv3AsLsdbTypeKnown
Internet Draft Expires October 2002 15 TruthValue
} }
ospfv3AsLsdbType OBJECT-TYPE ospfv3AsLsdbType OBJECT-TYPE
SYNTAX INTEGER { SYNTAX Unsigned32(0..'FFFFFFFF'h)
asExternalLink(16389) -- 0x4005
}
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The type of the link state advertisement. "The type of the link state advertisement.
Each link state type has a separate advertise- Each link state type has a separate advertise-
ment format. AS-Scope LSAs with the U-bit set
are also store in this database." Internet Draft Expires October 2003 17
ment format. AS-Scope LSAs not recognized by
the router may be stored in the database."
::= { ospfv3AsLsdbEntry 1 } ::= { ospfv3AsLsdbEntry 1 }
ospfv3AsLsdbRouterId OBJECT-TYPE ospfv3AsLsdbRouterId OBJECT-TYPE
SYNTAX RouterID SYNTAX RouterID
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The 32 bit number that uniquely identifies the "The 32 bit number that uniquely identifies the
originating router in the Autonomous System." originating router in the Autonomous System."
REFERENCE REFERENCE
skipping to change at line 863 skipping to change at line 961
ospfv3AsLsdbSequence OBJECT-TYPE ospfv3AsLsdbSequence OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The sequence number field is a signed 32-bit "The sequence number field is a signed 32-bit
integer. It is used to detect old and dupli- integer. It is used to detect old and dupli-
cate link state advertisements. The space of cate link state advertisements. The space of
sequence numbers is linearly ordered. The sequence numbers is linearly ordered. The
Internet Draft Expires October 2002 16
larger the sequence number the more recent the larger the sequence number the more recent the
advertisement." advertisement."
REFERENCE REFERENCE
"OSPF Version 2, Section 12.1.6 LS sequence "OSPF Version 2, Section 12.1.6 LS sequence
number" number"
::= { ospfv3AsLsdbEntry 4 } ::= { ospfv3AsLsdbEntry 4 }
ospfv3AsLsdbAge OBJECT-TYPE ospfv3AsLsdbAge OBJECT-TYPE
SYNTAX Integer32 -- Should be 0..MaxAge SYNTAX Integer32 -- Should be 0..MaxAge
-- unless DoNotAge bit is set -- unless DoNotAge bit is set
UNITS "seconds" UNITS "seconds"
Internet Draft Expires October 2003 18
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This field is the age of the link state adver- "This field is the age of the link state adver-
tisement in seconds." tisement in seconds."
REFERENCE REFERENCE
"OSPF Version 2, Section 12.1.1 LS age" "OSPF Version 2, Section 12.1.1 LS age"
::= { ospfv3AsLsdbEntry 5 } ::= { ospfv3AsLsdbEntry 5 }
ospfv3AsLsdbChecksum OBJECT-TYPE ospfv3AsLsdbChecksum OBJECT-TYPE
skipping to change at line 911 skipping to change at line 1009
ospfv3AsLsdbAdvertisement OBJECT-TYPE ospfv3AsLsdbAdvertisement OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..65535)) SYNTAX OCTET STRING (SIZE (1..65535))
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The entire Link State Advertisement, including "The entire Link State Advertisement, including
its header." its header."
::= { ospfv3AsLsdbEntry 7 } ::= { ospfv3AsLsdbEntry 7 }
ospfv3AsLsdbTypeKnown OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Is the LSA type recognized by this Router?"
::= { ospfv3AsLsdbEntry 8 }
-- OSPFv3 Area-Scope Link State Database -- OSPFv3 Area-Scope Link State Database
-- The Link State Database contains the Area-Scope Link State -- The Link State Database contains the Area-Scope Link State
-- Advertisements from throughout the area that the -- Advertisements from throughout the area that the
-- device is attached to. -- device is attached to.
ospfv3AreaLsdbTable OBJECT-TYPE ospfv3AreaLsdbTable OBJECT-TYPE
Internet Draft Expires October 2002 17
SYNTAX SEQUENCE OF Ospfv3AreaLsdbEntry SYNTAX SEQUENCE OF Ospfv3AreaLsdbEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
Internet Draft Expires October 2003 19
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The OSPFv3 Process's Area-Scope Link State Database." "The OSPFv3 Process's Area-Scope Link State Database."
::= { ospfv3Objects 4 } ::= { ospfv3Objects 4 }
ospfv3AreaLsdbEntry OBJECT-TYPE ospfv3AreaLsdbEntry OBJECT-TYPE
SYNTAX Ospfv3AreaLsdbEntry SYNTAX Ospfv3AreaLsdbEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at line 943 skipping to change at line 1049
INDEX { ospfv3AreaLsdbAreaId, INDEX { ospfv3AreaLsdbAreaId,
ospfv3AreaLsdbType, ospfv3AreaLsdbType,
ospfv3AreaLsdbRouterId, ospfv3AreaLsdbRouterId,
ospfv3AreaLsdbLsid } ospfv3AreaLsdbLsid }
::= { ospfv3AreaLsdbTable 1 } ::= { ospfv3AreaLsdbTable 1 }
Ospfv3AreaLsdbEntry ::= SEQUENCE { Ospfv3AreaLsdbEntry ::= SEQUENCE {
ospfv3AreaLsdbAreaId ospfv3AreaLsdbAreaId
AreaID, AreaID,
ospfv3AreaLsdbType ospfv3AreaLsdbType
INTEGER, Unsigned32,
ospfv3AreaLsdbRouterId ospfv3AreaLsdbRouterId
RouterID, RouterID,
ospfv3AreaLsdbLsid ospfv3AreaLsdbLsid
IpAddress, IpAddress,
ospfv3AreaLsdbSequence ospfv3AreaLsdbSequence
Integer32, Integer32,
ospfv3AreaLsdbAge ospfv3AreaLsdbAge
Integer32, Integer32,
ospfv3AreaLsdbChecksum ospfv3AreaLsdbChecksum
Integer32, Integer32,
ospfv3AreaLsdbAdvertisement ospfv3AreaLsdbAdvertisement
OCTET STRING OCTET STRING,
ospfv3AreaLsdbTypeKnown
TruthValue
} }
ospfv3AreaLsdbAreaId OBJECT-TYPE ospfv3AreaLsdbAreaId OBJECT-TYPE
SYNTAX AreaID SYNTAX AreaID
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The 32 bit identifier of the Area from which the "The 32 bit identifier of the Area from which the
LSA was received." LSA was received."
REFERENCE REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters" "OSPF Version 2, Appendix C.2 Area parameters"
::= { ospfv3AreaLsdbEntry 1 } ::= { ospfv3AreaLsdbEntry 1 }
ospfv3AreaLsdbType OBJECT-TYPE ospfv3AreaLsdbType OBJECT-TYPE
SYNTAX INTEGER { SYNTAX Unsigned32(0..'FFFFFFFF'h)
routerLsa(8193), -- 0x2001
networkLsa(8194), -- 0x2002
Internet Draft Expires October 2002 18
interAreaPrefixLsa(8195), -- 0x2003
interAreaRouterLsa(8196), -- 0x2004
groupMembershipLsa(8198), -- 0x2006
nssaExternalLsa(8199), -- 0x2007
intraAreaPrefixLsa(8201) -- 0x2009
}
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
Internet Draft Expires October 2003 20
DESCRIPTION DESCRIPTION
"The type of the link state advertisement. "The type of the link state advertisement.
Each link state type has a separate advertise- Each link state type has a separate advertise-
ment format. Area-Scope LSAs with the U-bit set ment format. Area-Scope LSAs unrecognized by the
are also stored in this database." router are also stored in this database."
::= { ospfv3AreaLsdbEntry 2 } ::= { ospfv3AreaLsdbEntry 2 }
ospfv3AreaLsdbRouterId OBJECT-TYPE ospfv3AreaLsdbRouterId OBJECT-TYPE
SYNTAX RouterID SYNTAX RouterID
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The 32 bit number that uniquely identifies the "The 32 bit number that uniquely identifies the
originating router in the Autonomous System." originating router in the Autonomous System."
REFERENCE REFERENCE
skipping to change at line 1028 skipping to change at line 1128
ospfv3AreaLsdbSequence OBJECT-TYPE ospfv3AreaLsdbSequence OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The sequence number field is a signed 32-bit "The sequence number field is a signed 32-bit
integer. It is used to detect old and dupli- integer. It is used to detect old and dupli-
cate link state advertisements. The space of cate link state advertisements. The space of
sequence numbers is linearly ordered. The sequence numbers is linearly ordered. The
Internet Draft Expires October 2002 19
larger the sequence number the more recent the larger the sequence number the more recent the
advertisement." advertisement."
REFERENCE REFERENCE
"OSPF Version 2, Section 12.1.6 LS sequence "OSPF Version 2, Section 12.1.6 LS sequence
number" number"
::= { ospfv3AreaLsdbEntry 5 } ::= { ospfv3AreaLsdbEntry 5 }
ospfv3AreaLsdbAge OBJECT-TYPE ospfv3AreaLsdbAge OBJECT-TYPE
Internet Draft Expires October 2003 21
SYNTAX Integer32 -- Should be 0..MaxAge SYNTAX Integer32 -- Should be 0..MaxAge
-- unless DoNotAge bit is set -- unless DoNotAge bit is set
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This field is the age of the link state adver- "This field is the age of the link state adver-
tisement in seconds." tisement in seconds."
REFERENCE REFERENCE
"OSPF Version 2, Section 12.1.1 LS age" "OSPF Version 2, Section 12.1.1 LS age"
skipping to change at line 1076 skipping to change at line 1176
ospfv3AreaLsdbAdvertisement OBJECT-TYPE ospfv3AreaLsdbAdvertisement OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..65535)) SYNTAX OCTET STRING (SIZE (1..65535))
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The entire Link State Advertisement, including "The entire Link State Advertisement, including
its header." its header."
::= { ospfv3AreaLsdbEntry 8 } ::= { ospfv3AreaLsdbEntry 8 }
ospfv3AreaLsdbTypeKnown OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Is the LSA type recognized by this Router?"
::= { ospfv3AreaLsdbEntry 9 }
-- OSPFv3 Link-Scope Link State Database -- OSPFv3 Link-Scope Link State Database
-- The Link State Database contains the Link-Scope Link State -- The Link State Database contains the Link-Scope Link State
-- Advertisements from the links that the -- Advertisements from the links that the
-- device is attached to. -- device is attached to.
ospfv3LinkLsdbTable OBJECT-TYPE ospfv3LinkLsdbTable OBJECT-TYPE
Internet Draft Expires October 2002 20 Internet Draft Expires October 2003 22
SYNTAX SEQUENCE OF Ospfv3LinkLsdbEntry SYNTAX SEQUENCE OF Ospfv3LinkLsdbEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The OSPFv3 Process's Link-Scope Link State Database." "The OSPFv3 Process's Link-Scope Link State Database."
::= { ospfv3Objects 5 } ::= { ospfv3Objects 5 }
ospfv3LinkLsdbEntry OBJECT-TYPE ospfv3LinkLsdbEntry OBJECT-TYPE
SYNTAX Ospfv3LinkLsdbEntry SYNTAX Ospfv3LinkLsdbEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
skipping to change at line 1108 skipping to change at line 1216
INDEX { ospfv3LinkLsdbIfIndex, INDEX { ospfv3LinkLsdbIfIndex,
ospfv3LinkLsdbType, ospfv3LinkLsdbType,
ospfv3LinkLsdbRouterId, ospfv3LinkLsdbRouterId,
ospfv3LinkLsdbLsid } ospfv3LinkLsdbLsid }
::= { ospfv3LinkLsdbTable 1 } ::= { ospfv3LinkLsdbTable 1 }
Ospfv3LinkLsdbEntry ::= SEQUENCE { Ospfv3LinkLsdbEntry ::= SEQUENCE {
ospfv3LinkLsdbIfIndex ospfv3LinkLsdbIfIndex
InterfaceIndex, InterfaceIndex,
ospfv3LinkLsdbType ospfv3LinkLsdbType
INTEGER, Unsigned32,
ospfv3LinkLsdbRouterId ospfv3LinkLsdbRouterId
RouterID, RouterID,
ospfv3LinkLsdbLsid ospfv3LinkLsdbLsid
IpAddress, IpAddress,
ospfv3LinkLsdbSequence ospfv3LinkLsdbSequence
Integer32, Integer32,
ospfv3LinkLsdbAge ospfv3LinkLsdbAge
Integer32, Integer32,
ospfv3LinkLsdbChecksum ospfv3LinkLsdbChecksum
Integer32, Integer32,
ospfv3LinkLsdbAdvertisement ospfv3LinkLsdbAdvertisement
OCTET STRING OCTET STRING,
ospfv3LinkLsdbTypeKnown
TruthValue
} }
ospfv3LinkLsdbIfIndex OBJECT-TYPE ospfv3LinkLsdbIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex SYNTAX InterfaceIndex
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The identifier of the link from which the LSA "The identifier of the link from which the LSA
was received." was received."
REFERENCE REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters" "OSPF Version 2, Appendix C.2 Area parameters"
::= { ospfv3LinkLsdbEntry 1 } ::= { ospfv3LinkLsdbEntry 1 }
ospfv3LinkLsdbType OBJECT-TYPE ospfv3LinkLsdbType OBJECT-TYPE
SYNTAX INTEGER { SYNTAX Unsigned32(0..'FFFFFFFF'h)
linkLsa(8) -- 0x0008
}
Internet Draft Expires October 2002 21 Internet Draft Expires October 2003 23
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The type of the link state advertisement. "The type of the link state advertisement.
Each link state type has a separate advertise- Each link state type has a separate advertise-
ment format. Link-Scope LSAs with the U-bit set ment format. Link-Scope LSAs unrecognized by the
are also stored in this database." router are also stored in this database."
::= { ospfv3LinkLsdbEntry 2 } ::= { ospfv3LinkLsdbEntry 2 }
ospfv3LinkLsdbRouterId OBJECT-TYPE ospfv3LinkLsdbRouterId OBJECT-TYPE
SYNTAX RouterID SYNTAX RouterID
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The 32 bit number that uniquely identifies the "The 32 bit number that uniquely identifies the
originating router in the Autonomous System." originating router in the Autonomous System."
REFERENCE REFERENCE
skipping to change at line 1194 skipping to change at line 1302
integer. It is used to detect old and dupli- integer. It is used to detect old and dupli-
cate link state advertisements. The space of cate link state advertisements. The space of
sequence numbers is linearly ordered. The sequence numbers is linearly ordered. The
larger the sequence number the more recent the larger the sequence number the more recent the
advertisement." advertisement."
REFERENCE REFERENCE
"OSPF Version 2, Section 12.1.6 LS sequence "OSPF Version 2, Section 12.1.6 LS sequence
number" number"
::= { ospfv3LinkLsdbEntry 5 } ::= { ospfv3LinkLsdbEntry 5 }
Internet Draft Expires October 2002 22 Internet Draft Expires October 2003 24
ospfv3LinkLsdbAge OBJECT-TYPE ospfv3LinkLsdbAge OBJECT-TYPE
SYNTAX Integer32 -- Should be 0..MaxAge SYNTAX Integer32 -- Should be 0..MaxAge
-- unless DoNotAge bit is set -- unless DoNotAge bit is set
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This field is the age of the link state adver- "This field is the age of the link state adver-
tisement in seconds." tisement in seconds."
REFERENCE REFERENCE
skipping to change at line 1234 skipping to change at line 1342
ospfv3LinkLsdbAdvertisement OBJECT-TYPE ospfv3LinkLsdbAdvertisement OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..65535)) SYNTAX OCTET STRING (SIZE (1..65535))
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The entire Link State Advertisement, including "The entire Link State Advertisement, including
its header." its header."
::= { ospfv3LinkLsdbEntry 8 } ::= { ospfv3LinkLsdbEntry 8 }
ospfv3LinkLsdbTypeKnown OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Is the LSA type recognized by this Router?"
::= { ospfv3LinkLsdbEntry 9 }
-- OSPF Host Table -- OSPF Host Table
-- The Host/Metric Table indicates what hosts are directly -- The Host/Metric Table indicates what hosts are directly
-- attached to the Router, and what metrics and types of -- attached to the Router, and what metrics and types of
Internet Draft Expires October 2003 25
-- service should be advertised for them. -- service should be advertised for them.
ospfv3HostTable OBJECT-TYPE ospfv3HostTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3HostEntry SYNTAX SEQUENCE OF Ospfv3HostEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The list of Hosts, and their metrics, that the "The list of Hosts, and their metrics, that the
router will advertise as host routes." router will advertise as host routes."
Internet Draft Expires October 2002 23
REFERENCE REFERENCE
"OSPF Version 2, Appendix C.6 Host route param- "OSPF Version 2, Appendix C.6 Host route param-
eters" eters"
::= { ospfv3Objects 6 } ::= { ospfv3Objects 6 }
ospfv3HostEntry OBJECT-TYPE ospfv3HostEntry OBJECT-TYPE
SYNTAX Ospfv3HostEntry SYNTAX Ospfv3HostEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at line 1292 skipping to change at line 1408
DESCRIPTION DESCRIPTION
"The address type of ospfv3HostAddress. Only IPv6 "The address type of ospfv3HostAddress. Only IPv6
addresses without zone index are expected." addresses without zone index are expected."
REFERENCE REFERENCE
"OSPF Version 2, Appendix C.6 Host route parame- "OSPF Version 2, Appendix C.6 Host route parame-
ters" ters"
::= { ospfv3HostEntry 1 } ::= { ospfv3HostEntry 1 }
ospfv3HostAddress OBJECT-TYPE ospfv3HostAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (16)) SYNTAX InetAddress (SIZE (16))
Internet Draft Expires October 2003 26
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The IPv6 Address of the Host. Must be a Global "The IPv6 Address of the Host. Must be a Global
or Site-local address." or Site-local address."
REFERENCE REFERENCE
"OSPF Version 2, Appendix C.6 Host route parame- "OSPF Version 2, Appendix C.6 Host route parame-
ters" ters"
::= { ospfv3HostEntry 2 } ::= { ospfv3HostEntry 2 }
Internet Draft Expires October 2002 24
ospfv3HostMetric OBJECT-TYPE ospfv3HostMetric OBJECT-TYPE
SYNTAX Metric SYNTAX Metric
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Metric to be advertised." "The Metric to be advertised."
REFERENCE REFERENCE
"OSPF Version 2, Appendix C.6 Host route parame- "OSPF Version 2, Appendix C.6 Host route parame-
ters" ters"
::= { ospfv3HostEntry 3 } ::= { ospfv3HostEntry 3 }
skipping to change at line 1346 skipping to change at line 1463
-- OSPFv3 Interface Table -- OSPFv3 Interface Table
ospfv3IfTable OBJECT-TYPE ospfv3IfTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3IfEntry SYNTAX SEQUENCE OF Ospfv3IfEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The OSPFv3 Interface Table describes the inter- "The OSPFv3 Interface Table describes the inter-
faces from the viewpoint of OSPFv3." faces from the viewpoint of OSPFv3."
REFERENCE REFERENCE
Internet Draft Expires October 2003 27
"OSPF Version 2, Appendix C.3 Router interface "OSPF Version 2, Appendix C.3 Router interface
parameters" parameters"
::= { ospfv3Objects 7 } ::= { ospfv3Objects 7 }
ospfv3IfEntry OBJECT-TYPE ospfv3IfEntry OBJECT-TYPE
SYNTAX Ospfv3IfEntry SYNTAX Ospfv3IfEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
Internet Draft Expires October 2002 25
"The OSPFv3 Interface Entry describes one inter- "The OSPFv3 Interface Entry describes one inter-
face from the viewpoint of OSPFv3." face from the viewpoint of OSPFv3."
INDEX { ospfv3IfIndex } INDEX { ospfv3IfIndex }
::= { ospfv3IfTable 1 } ::= { ospfv3IfTable 1 }
Ospfv3IfEntry ::= SEQUENCE { Ospfv3IfEntry ::= SEQUENCE {
ospfv3IfIndex ospfv3IfIndex
InterfaceIndex, InterfaceIndex,
ospfv3IfAreaId ospfv3IfAreaId
AreaID, AreaID,
skipping to change at line 1400 skipping to change at line 1517
Counter32, Counter32,
ospfv3IfStatus ospfv3IfStatus
RowStatus, RowStatus,
ospfv3IfMulticastForwarding ospfv3IfMulticastForwarding
INTEGER, INTEGER,
ospfv3IfDemand ospfv3IfDemand
TruthValue, TruthValue,
ospfv3IfMetricValue ospfv3IfMetricValue
Metric, Metric,
ospfv3IfLinkScopeLsaCount ospfv3IfLinkScopeLsaCount
Internet Draft Expires October 2003 28
Gauge32, Gauge32,
ospfv3IfLinkLsaCksumSum ospfv3IfLinkLsaCksumSum
Integer32, Integer32,
ospfv3IfInstId ospfv3IfInstId
Integer32 Integer32,
ospfv3IfDemandNbrProbe
TruthValue,
ospfv3IfDemandNbrProbeRetxLimit
Unsigned32,
ospfv3IfDemandNbrProbeInterval
Unsigned32
} }
ospfv3IfIndex OBJECT-TYPE ospfv3IfIndex OBJECT-TYPE
SYNTAX InterfaceIndex SYNTAX InterfaceIndex
Internet Draft Expires October 2002 26
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The interface index of this OSPFv3 interface. "The interface index of this OSPFv3 interface.
It corresponds to the interface index of the It corresponds to the interface index of the
IPv6 interface on which OSPFv3 is configured." IPv6 interface on which OSPFv3 is configured."
::= { ospfv3IfEntry 1 } ::= { ospfv3IfEntry 1 }
ospfv3IfAreaId OBJECT-TYPE ospfv3IfAreaId OBJECT-TYPE
SYNTAX AreaID SYNTAX AreaID
skipping to change at line 1449 skipping to change at line 1572
DESCRIPTION DESCRIPTION
"The OSPFv3 interface type." "The OSPFv3 interface type."
::= { ospfv3IfEntry 3 } ::= { ospfv3IfEntry 3 }
ospfv3IfAdminStat OBJECT-TYPE ospfv3IfAdminStat OBJECT-TYPE
SYNTAX Status SYNTAX Status
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The OSPFv3 interface's administrative status. "The OSPFv3 interface's administrative status.
Internet Draft Expires October 2003 29
The value formed on the interface, and the in- The value formed on the interface, and the in-
terface will be advertised as an internal route terface will be advertised as an internal route
to some area. The value 'disabled' denotes to some area. The value 'disabled' denotes
that the interface is external to OSPFv3." that the interface is external to OSPFv3."
DEFVAL { enabled } DEFVAL { enabled }
::= { ospfv3IfEntry 4 } ::= { ospfv3IfEntry 4 }
ospfv3IfRtrPriority OBJECT-TYPE ospfv3IfRtrPriority OBJECT-TYPE
SYNTAX DesignatedRouterPriority SYNTAX DesignatedRouterPriority
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The priority of this interface. Used in "The priority of this interface. Used in
multi-access networks, this field is used in multi-access networks, this field is used in
the designated router election algorithm. The the designated router election algorithm. The
Internet Draft Expires October 2002 27
value 0 signifies that the router is not eligi- value 0 signifies that the router is not eligi-
ble to become the designated router on this ble to become the designated router on this
particular network. In the event of a tie in particular network. In the event of a tie in
this value, routers will use their Router ID as this value, routers will use their Router ID as
a tie breaker." a tie breaker."
DEFVAL { 1 } DEFVAL { 1 }
::= { ospfv3IfEntry 5 } ::= { ospfv3IfEntry 5 }
ospfv3IfTransitDelay OBJECT-TYPE ospfv3IfTransitDelay OBJECT-TYPE
SYNTAX UpToMaxAge SYNTAX UpToMaxAge
skipping to change at line 1504 skipping to change at line 1627
belonging to this interface. This value is belonging to this interface. This value is
also used when retransmitting database descrip- also used when retransmitting database descrip-
tion and link-state request packets." tion and link-state request packets."
DEFVAL { 5 } DEFVAL { 5 }
::= { ospfv3IfEntry 7 } ::= { ospfv3IfEntry 7 }
ospfv3IfHelloInterval OBJECT-TYPE ospfv3IfHelloInterval OBJECT-TYPE
SYNTAX HelloRange SYNTAX HelloRange
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
Internet Draft Expires October 2003 30
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The length of time, in seconds, between the "The length of time, in seconds, between the
Hello packets that the router sends on the in- Hello packets that the router sends on the in-
terface. This value must be the same for all terface. This value must be the same for all
routers attached to a common network." routers attached to a common network."
DEFVAL { 10 } DEFVAL { 10 }
::= { ospfv3IfEntry 8 } ::= { ospfv3IfEntry 8 }
ospfv3IfRtrDeadInterval OBJECT-TYPE ospfv3IfRtrDeadInterval OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
Internet Draft Expires October 2002 28
"The number of seconds that a router's Hello "The number of seconds that a router's Hello
packets have not been seen before it's neigh- packets have not been seen before it's neigh-
bors declare the router down. This should be bors declare the router down. This should be
some multiple of the Hello interval. This some multiple of the Hello interval. This
value must be the same for all routers attached value must be the same for all routers attached
to a common network." to a common network."
DEFVAL { 40 } DEFVAL { 40 }
::= { ospfv3IfEntry 9 } ::= { ospfv3IfEntry 9 }
ospfv3IfPollInterval OBJECT-TYPE ospfv3IfPollInterval OBJECT-TYPE
skipping to change at line 1559 skipping to change at line 1682
backupDesignatedRouter(6), backupDesignatedRouter(6),
otherDesignatedRouter(7) otherDesignatedRouter(7)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The OSPFv3 Interface State." "The OSPFv3 Interface State."
::= { ospfv3IfEntry 11 } ::= { ospfv3IfEntry 11 }
ospfv3IfDesignatedRouter OBJECT-TYPE ospfv3IfDesignatedRouter OBJECT-TYPE
Internet Draft Expires October 2003 31
SYNTAX RouterID SYNTAX RouterID
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Router ID of the Designated Router." "The Router ID of the Designated Router."
::= { ospfv3IfEntry 12 } ::= { ospfv3IfEntry 12 }
ospfv3IfBackupDesignatedRouter OBJECT-TYPE ospfv3IfBackupDesignatedRouter OBJECT-TYPE
SYNTAX RouterID SYNTAX RouterID
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Router ID of the Backup Designated "The Router ID of the Backup Designated
Router." Router."
::= { ospfv3IfEntry 14 } ::= { ospfv3IfEntry 14 }
Internet Draft Expires October 2002 29
ospfv3IfEvents OBJECT-TYPE ospfv3IfEvents OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of times this OSPF interface has "The number of times this OSPF interface has
changed its state, or an error has occurred." changed its state, or an error has occurred."
::= { ospfv3IfEntry 15 } ::= { ospfv3IfEntry 15 }
ospfv3IfStatus OBJECT-TYPE ospfv3IfStatus OBJECT-TYPE
skipping to change at line 1614 skipping to change at line 1738
"The way multicasts should forwarded on this "The way multicasts should forwarded on this
interface; not forwarded, forwarded as data interface; not forwarded, forwarded as data
link multicasts, or forwarded as data link uni- link multicasts, or forwarded as data link uni-
casts. Data link multicasting is not meaning- casts. Data link multicasting is not meaning-
ful on point to point and NBMA interfaces, and ful on point to point and NBMA interfaces, and
setting ospfv3MulticastForwarding to 0 effective- setting ospfv3MulticastForwarding to 0 effective-
ly disables all multicast forwarding." ly disables all multicast forwarding."
DEFVAL { blocked } DEFVAL { blocked }
::= { ospfv3IfEntry 18 } ::= { ospfv3IfEntry 18 }
Internet Draft Expires October 2003 32
ospfv3IfDemand OBJECT-TYPE ospfv3IfDemand OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates whether Demand OSPFv3 procedures (hel- "Indicates whether Demand OSPFv3 procedures (hel-
lo suppression to FULL neighbors and setting the lo suppression to FULL neighbors and setting the
DoNotAge flag on propagated LSAs) should be per- DoNotAge flag on propagated LSAs) should be per-
formed on this interface." formed on this interface."
DEFVAL { false } DEFVAL { false }
::= { ospfv3IfEntry 19 } ::= { ospfv3IfEntry 19 }
ospfv3IfMetricValue OBJECT-TYPE ospfv3IfMetricValue OBJECT-TYPE
SYNTAX Metric SYNTAX Metric
Internet Draft Expires October 2002 30
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The metric assigned to this interface. "The metric assigned to this interface.
The default value of the Metric is The default value of the Metric is
10^8 / ifSpeed." Reference Bandwidth / ifSpeed. The value of the
reference bandwidth is configured by the
ospfv3ReferenceBandwidth object."
::= { ospfv3IfEntry 20 } ::= { ospfv3IfEntry 20 }
ospfv3IfLinkScopeLsaCount OBJECT-TYPE ospfv3IfLinkScopeLsaCount OBJECT-TYPE
SYNTAX Gauge32 SYNTAX Gauge32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The total number of Link-Scope link-state "The total number of Link-Scope link-state
advertisements in this link's link-state database." advertisements in this link's link-state database."
::= { ospfv3IfEntry 21 } ::= { ospfv3IfEntry 21 }
skipping to change at line 1666 skipping to change at line 1791
router's link state database, and to compare the router's link state database, and to compare the
link-state database of two routers." link-state database of two routers."
::= { ospfv3IfEntry 22 } ::= { ospfv3IfEntry 22 }
ospfv3IfInstId OBJECT-TYPE ospfv3IfInstId OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Enables multiple instances of OSPFv3 to be run over "Enables multiple instances of OSPFv3 to be run over
Internet Draft Expires October 2003 33
a single link. Each protocol instance would be assigned a single link. Each protocol instance would be assigned
a separate ID. This ID has local link significance a separate ID. This ID has local link significance
only." only."
DEFVAL { 0 } DEFVAL { 0 }
::= { ospfv3IfEntry 23 } ::= { ospfv3IfEntry 23 }
ospfv3IfDemandNbrProbe OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Indicates whether or not neighbor probing is
enabled to determine whether or not the neighbor
is inactive. Neighbor probing is disabled by
default."
DEFVAL { false }
::= { ospfv3IfEntry 24 }
ospfv3IfDemandNbrProbeRetxLimit OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The number of consecutive LSA retransmissions before
the neighbor is deemed inactive and the neighbor
adjacency is brought down."
DEFVAL { 10 }
::= { ospfv3IfEntry 25 }
ospfv3IfDemandNbrProbeInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Defines how often the neighbor will be probed."
DEFVAL { 120 }
::= { ospfv3IfEntry 26 }
-- OSPFv3 Virtual Interface Table -- OSPFv3 Virtual Interface Table
-- The Virtual Interface Table describes the virtual -- The Virtual Interface Table describes the virtual
-- links that the OSPFv3 Process is configured to -- links that the OSPFv3 Process is configured to
-- carry on. -- carry on.
ospfv3VirtIfTable OBJECT-TYPE ospfv3VirtIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3VirtIfEntry SYNTAX SEQUENCE OF Ospfv3VirtIfEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
Internet Draft Expires October 2002 31 Internet Draft Expires October 2003 34
"Information about this router's virtual inter- "Information about this router's virtual inter-
faces." faces."
REFERENCE REFERENCE
"OSPF Version 2, Appendix C.4 Virtual link "OSPF Version 2, Appendix C.4 Virtual link
parameters" parameters"
::= { ospfv3Objects 8 } ::= { ospfv3Objects 8 }
ospfv3VirtIfEntry OBJECT-TYPE ospfv3VirtIfEntry OBJECT-TYPE
SYNTAX Ospfv3VirtIfEntry SYNTAX Ospfv3VirtIfEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
skipping to change at line 1738 skipping to change at line 1899
ospfv3VirtIfAreaId OBJECT-TYPE ospfv3VirtIfAreaId OBJECT-TYPE
SYNTAX AreaID SYNTAX AreaID
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Transit Area that the Virtual Link "The Transit Area that the Virtual Link
traverses. By definition, this is not 0.0.0.0" traverses. By definition, this is not 0.0.0.0"
::= { ospfv3VirtIfEntry 1 } ::= { ospfv3VirtIfEntry 1 }
Internet Draft Expires October 2002 32 Internet Draft Expires October 2003 35
ospfv3VirtIfNeighbor OBJECT-TYPE ospfv3VirtIfNeighbor OBJECT-TYPE
SYNTAX RouterID SYNTAX RouterID
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Router ID of the Virtual Neighbor." "The Router ID of the Virtual Neighbor."
::= { ospfv3VirtIfEntry 2 } ::= { ospfv3VirtIfEntry 2 }
ospfv3VirtIfIndex OBJECT-TYPE ospfv3VirtIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex SYNTAX InterfaceIndex
skipping to change at line 1793 skipping to change at line 1954
::= { ospfv3VirtIfEntry 5 } ::= { ospfv3VirtIfEntry 5 }
ospfv3VirtIfHelloInterval OBJECT-TYPE ospfv3VirtIfHelloInterval OBJECT-TYPE
SYNTAX HelloRange SYNTAX HelloRange
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The length of time, in seconds, between the "The length of time, in seconds, between the
Internet Draft Expires October 2002 33 Internet Draft Expires October 2003 36
Hello packets that the router sends on the in- Hello packets that the router sends on the in-
terface. This value must be the same for the terface. This value must be the same for the
virtual neighbor." virtual neighbor."
DEFVAL { 10 } DEFVAL { 10 }
::= { ospfv3VirtIfEntry 6 } ::= { ospfv3VirtIfEntry 6 }
ospfv3VirtIfRtrDeadInterval OBJECT-TYPE ospfv3VirtIfRtrDeadInterval OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
skipping to change at line 1848 skipping to change at line 2009
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This variable controls the status of the en- "This variable controls the status of the en-
try. The use of RowStatus is covered in more detail try. The use of RowStatus is covered in more detail
in [6]." in [6]."
::= { ospfv3VirtIfEntry 10 } ::= { ospfv3VirtIfEntry 10 }
ospfv3VirtIfLinkScopeLsaCount OBJECT-TYPE ospfv3VirtIfLinkScopeLsaCount OBJECT-TYPE
SYNTAX Gauge32 SYNTAX Gauge32
Internet Draft Expires October 2002 34 Internet Draft Expires October 2003 37
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The total number of Link-Scope link-state "The total number of Link-Scope link-state
advertisements in this virtual link's link-state advertisements in this virtual link's link-state
database." database."
::= { ospfv3VirtIfEntry 11 } ::= { ospfv3VirtIfEntry 11 }
ospfv3VirtIfLinkLsaCksumSum OBJECT-TYPE ospfv3VirtIfLinkLsaCksumSum OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
skipping to change at line 1901 skipping to change at line 2062
"The information regarding a single neighbor." "The information regarding a single neighbor."
REFERENCE REFERENCE
"OSPF Version 2, Section 10 The Neighbor Data "OSPF Version 2, Section 10 The Neighbor Data
Structure" Structure"
INDEX { ospfv3NbrIfIndex, INDEX { ospfv3NbrIfIndex,
ospfv3NbrRtrId } ospfv3NbrRtrId }
::= { ospfv3NbrTable 1 } ::= { ospfv3NbrTable 1 }
Ospfv3NbrEntry ::= SEQUENCE { Ospfv3NbrEntry ::= SEQUENCE {
ospfv3NbrIfIndex ospfv3NbrIfIndex
InterfaceIndex,
Internet Draft Expires October 2002 35 Internet Draft Expires October 2003 38
InterfaceIndex,
ospfv3NbrRtrId ospfv3NbrRtrId
RouterID, RouterID,
ospfv3NbrAddressType ospfv3NbrAddressType
InetAddressType, InetAddressType,
ospfv3NbrAddress ospfv3NbrAddress
InetAddress, InetAddress,
ospfv3NbrOptions ospfv3NbrOptions
Integer32, Integer32,
ospfv3NbrPriority ospfv3NbrPriority
DesignatedRouterPriority, DesignatedRouterPriority,
ospfv3NbrState ospfv3NbrState
INTEGER, INTEGER,
ospfv3NbrEvents ospfv3NbrEvents
Counter32, Counter32,
ospfv3NbrLsRetransQLen ospfv3NbrLsRetransQLen
Gauge32, Gauge32,
ospfv3NbrHelloSuppressed ospfv3NbrHelloSuppressed
TruthValue, TruthValue,
ospfv3NbrIfId ospfv3NbrIfId
InterfaceIndex InterfaceIndex,
ospfv3NbrRestartHelperStatus
INTEGER,
ospfv3NbrRestartHelperAge
Unsigned32,
ospfv3NbrRestartHelperExitReason
INTEGER
} }
ospfv3NbrIfIndex OBJECT-TYPE ospfv3NbrIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex SYNTAX InterfaceIndex
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The local link ID of the link over which the "The local link ID of the link over which the
neighbor can be reached." neighbor can be reached."
::= { ospfv3NbrEntry 1 } ::= { ospfv3NbrEntry 1 }
skipping to change at line 1950 skipping to change at line 2117
"A 32-bit integer (represented as a type IpAd- "A 32-bit integer (represented as a type IpAd-
dress) uniquely identifying the neighboring dress) uniquely identifying the neighboring
router in the Autonomous System." router in the Autonomous System."
::= { ospfv3NbrEntry 2 } ::= { ospfv3NbrEntry 2 }
ospfv3NbrAddressType OBJECT-TYPE ospfv3NbrAddressType OBJECT-TYPE
SYNTAX InetAddressType SYNTAX InetAddressType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
Internet Draft Expires October 2003 39
"The address type of ospfv3NbrAddress. Only IPv6 "The address type of ospfv3NbrAddress. Only IPv6
addresses without zone index are expected." addresses without zone index are expected."
::= { ospfv3NbrEntry 3 } ::= { ospfv3NbrEntry 3 }
ospfv3NbrAddress OBJECT-TYPE ospfv3NbrAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (16)) SYNTAX InetAddress (SIZE (16))
MAX-ACCESS read-only MAX-ACCESS read-only
Internet Draft Expires October 2002 36
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The IPv6 address of the neighbor associated with "The IPv6 address of the neighbor associated with
the local link." the local link."
::= { ospfv3NbrEntry 4 } ::= { ospfv3NbrEntry 4 }
ospfv3NbrOptions OBJECT-TYPE ospfv3NbrOptions OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
skipping to change at line 2005 skipping to change at line 2172
exchange(6), exchange(6),
loading(7), loading(7),
full(8) full(8)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The State of the relationship with this Neigh- "The State of the relationship with this Neigh-
bor." bor."
REFERENCE REFERENCE
Internet Draft Expires October 2003 40
"OSPF Version 2, Section 10.1 Neighbor States" "OSPF Version 2, Section 10.1 Neighbor States"
::= { ospfv3NbrEntry 7 } ::= { ospfv3NbrEntry 7 }
ospfv3NbrEvents OBJECT-TYPE ospfv3NbrEvents OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
Internet Draft Expires October 2002 37
DESCRIPTION DESCRIPTION
"The number of times this neighbor relationship "The number of times this neighbor relationship
has changed state, or an error has occurred." has changed state, or an error has occurred."
::= { ospfv3NbrEntry 8 } ::= { ospfv3NbrEntry 8 }
ospfv3NbrLsRetransQLen OBJECT-TYPE ospfv3NbrLsRetransQLen OBJECT-TYPE
SYNTAX Gauge32 SYNTAX Gauge32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at line 2047 skipping to change at line 2214
ospfv3NbrIfId OBJECT-TYPE ospfv3NbrIfId OBJECT-TYPE
SYNTAX InterfaceIndex SYNTAX InterfaceIndex
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The interface ID that the neighbor advertises "The interface ID that the neighbor advertises
in its Hello Packets on this link, that is, the in its Hello Packets on this link, that is, the
neighbor's local interface index." neighbor's local interface index."
::= { ospfv3NbrEntry 11 } ::= { ospfv3NbrEntry 11 }
ospfv3NbrRestartHelperStatus OBJECT-TYPE
SYNTAX INTEGER { notHelping (1),
helping (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the router is acting
as a hitless restart helper for the neighbor."
::= { ospfv3NbrEntry 12 }
ospfv3NbrRestartHelperAge OBJECT-TYPE
SYNTAX Unsigned32
Internet Draft Expires October 2003 41
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remaining time in current OSPF hitless restart
interval, if the router is acting as a restart
helper for the neighbor."
::= { ospfv3NbrEntry 13 }
ospfv3NbrRestartHelperExitReason OBJECT-TYPE
SYNTAX INTEGER { none (1), -- not attempted
inProgress (2), -- restart in
-- progress
completed (3), -- successfully
-- completed
timedOut (4), -- timed out
topologyChanged (5) -- aborted due to
-- topology
-- change.
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the outcome of the last attempt at acting
as a hitless restart helper for the neighbor."
::= { ospfv3NbrEntry 14 }
-- OSPFv3 NBMA Neighbor Table -- OSPFv3 NBMA Neighbor Table
-- The OSPFv3 NBMA Neighbor Table describes all configured -- The OSPFv3 NBMA Neighbor Table describes all configured
-- NBMA neighbors and neighbors dynamically discovered by -- NBMA neighbors and neighbors dynamically discovered by
-- lower-level protocols such as Inverse Neighbor Discovery. -- lower-level protocols such as Inverse Neighbor Discovery.
ospfv3NbmaNbrTable OBJECT-TYPE ospfv3NbmaNbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3NbmaNbrEntry SYNTAX SEQUENCE OF Ospfv3NbmaNbrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A table of configured non-virtual neighbor "A table of configured non-virtual neighbor
information and neighbors dynamically discovered information and neighbors dynamically discovered
by lower-level protocols such as Inverse Neighbor by lower-level protocols such as Inverse Neighbor
Discovery." Discovery."
REFERENCE REFERENCE
"OSPF Version 2, Section 10 The Neighbor Data "OSPF Version 2, Section 10 The Neighbor Data
Structure" Structure"
::= { ospfv3Objects 10 } ::= { ospfv3Objects 10 }
Internet Draft Expires October 2002 38
ospfv3NbmaNbrEntry OBJECT-TYPE ospfv3NbmaNbrEntry OBJECT-TYPE
SYNTAX Ospfv3NbmaNbrEntry SYNTAX Ospfv3NbmaNbrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
Internet Draft Expires October 2003 42
"The information regarding a single configured "The information regarding a single configured
neighbor or neighbor discovered by lower-level neighbor or neighbor discovered by lower-level
protocols such as Inverse Neighbor Discovery." protocols such as Inverse Neighbor Discovery."
REFERENCE REFERENCE
"OSPF Version 2, Section 10 The Neighbor Data "OSPF Version 2, Section 10 The Neighbor Data
Structure" Structure"
INDEX { ospfv3NbmaNbrIfIndex, INDEX { ospfv3NbmaNbrIfIndex,
ospfv3NbmaNbrAddressType, ospfv3NbmaNbrAddressType,
ospfv3NbmaNbrAddress } ospfv3NbmaNbrAddress }
::= { ospfv3NbmaNbrTable 1 } ::= { ospfv3NbmaNbrTable 1 }
skipping to change at line 2121 skipping to change at line 2331
ospfv3NbmaNbrAddressType OBJECT-TYPE ospfv3NbmaNbrAddressType OBJECT-TYPE
SYNTAX InetAddressType SYNTAX InetAddressType
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The address type of ospfv3NbrAddress. Only IPv6 "The address type of ospfv3NbrAddress. Only IPv6
addresses without zone index are expected." addresses without zone index are expected."
::= { ospfv3NbmaNbrEntry 2 } ::= { ospfv3NbmaNbrEntry 2 }
Internet Draft Expires October 2002 39
ospfv3NbmaNbrAddress OBJECT-TYPE ospfv3NbmaNbrAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (16)) SYNTAX InetAddress (SIZE (16))
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
Internet Draft Expires October 2003 43
"The IPv6 address of the neighbor associated with "The IPv6 address of the neighbor associated with
the local link." the local link."
::= { ospfv3NbmaNbrEntry 3 } ::= { ospfv3NbmaNbrEntry 3 }
ospfv3NbmaNbrPriority OBJECT-TYPE ospfv3NbmaNbrPriority OBJECT-TYPE
SYNTAX DesignatedRouterPriority SYNTAX DesignatedRouterPriority
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The priority of this neighbor in the designat- "The priority of this neighbor in the designat-
skipping to change at line 2176 skipping to change at line 2387
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The State of the relationship with this Neigh- "The State of the relationship with this Neigh-
bor." bor."
REFERENCE REFERENCE
"OSPF Version 2, Section 10.1 Neighbor States" "OSPF Version 2, Section 10.1 Neighbor States"
::= { ospfv3NbmaNbrEntry 6 } ::= { ospfv3NbmaNbrEntry 6 }
Internet Draft Expires October 2002 40
ospfv3NbmaNbrStorageType OBJECT-TYPE ospfv3NbmaNbrStorageType OBJECT-TYPE
SYNTAX StorageType SYNTAX StorageType
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
Internet Draft Expires October 2003 44
DESCRIPTION DESCRIPTION
"The storage type for this conceptual row. "The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row. allow write-access to any columnar objects in the row.
Manually configured entries will have a storage type Manually configured entries will have a storage type
of nonVolatile while entries dynamically created as a of nonVolatile while entries dynamically created as a
result of a lower-level protocol such as Inverse result of a lower-level protocol such as Inverse
Neighbor Discovery will have a storage type of Neighbor Discovery will have a storage type of
volatile." volatile."
DEFVAL { nonVolatile } DEFVAL { nonVolatile }
skipping to change at line 2229 skipping to change at line 2441
ospfv3VirtNbrEntry OBJECT-TYPE ospfv3VirtNbrEntry OBJECT-TYPE
SYNTAX Ospfv3VirtNbrEntry SYNTAX Ospfv3VirtNbrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Virtual neighbor information." "Virtual neighbor information."
INDEX { ospfv3VirtNbrArea, INDEX { ospfv3VirtNbrArea,
ospfv3VirtNbrRtrId } ospfv3VirtNbrRtrId }
::= { ospfv3VirtNbrTable 1 } ::= { ospfv3VirtNbrTable 1 }
Internet Draft Expires October 2002 41
Ospfv3VirtNbrEntry ::= SEQUENCE { Ospfv3VirtNbrEntry ::= SEQUENCE {
ospfv3VirtNbrArea ospfv3VirtNbrArea
AreaID, AreaID,
ospfv3VirtNbrRtrId ospfv3VirtNbrRtrId
RouterID, RouterID,
Internet Draft Expires October 2003 45
ospfv3VirtNbrIfIndex ospfv3VirtNbrIfIndex
InterfaceIndex, InterfaceIndex,
ospfv3VirtNbrAddressType ospfv3VirtNbrAddressType
InetAddressType, InetAddressType,
ospfv3VirtNbrAddress ospfv3VirtNbrAddress
InetAddress, InetAddress,
ospfv3VirtNbrOptions ospfv3VirtNbrOptions
Integer32, Integer32,
ospfv3VirtNbrState ospfv3VirtNbrState
INTEGER, INTEGER,
ospfv3VirtNbrEvents ospfv3VirtNbrEvents
Counter32, Counter32,
ospfv3VirtNbrLsRetransQLen ospfv3VirtNbrLsRetransQLen
Gauge32, Gauge32,
ospfv3VirtNbrHelloSuppressed ospfv3VirtNbrHelloSuppressed
TruthValue, TruthValue,
ospfv3VirtNbrIfId ospfv3VirtNbrIfId
InterfaceIndex InterfaceIndex,
ospfv3VirtNbrRestartHelperStatus
INTEGER,
ospfv3VirtNbrRestartHelperAge
Unsigned32,
ospfv3VirtNbrRestartHelperExitReason
INTEGER
} }
ospfv3VirtNbrArea OBJECT-TYPE ospfv3VirtNbrArea OBJECT-TYPE
SYNTAX AreaID SYNTAX AreaID
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Transit Area Identifier." "The Transit Area Identifier."
::= { ospfv3VirtNbrEntry 1 } ::= { ospfv3VirtNbrEntry 1 }
skipping to change at line 2282 skipping to change at line 2501
ospfv3VirtNbrIfIndex OBJECT-TYPE ospfv3VirtNbrIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex SYNTAX InterfaceIndex
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The local interface ID for the virtual link over "The local interface ID for the virtual link over
which the neighbor can be reached." which the neighbor can be reached."
::= { ospfv3VirtNbrEntry 3 } ::= { ospfv3VirtNbrEntry 3 }
ospfv3VirtNbrAddressType OBJECT-TYPE ospfv3VirtNbrAddressType OBJECT-TYPE
SYNTAX InetAddressType
Internet Draft Expires October 2002 42 Internet Draft Expires October 2003 46
SYNTAX InetAddressType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The address type of ospfv3VirtNbrAddress. Only IPv6 "The address type of ospfv3VirtNbrAddress. Only IPv6
addresses without zone index are expected." addresses without zone index are expected."
::= { ospfv3VirtNbrEntry 4 } ::= { ospfv3VirtNbrEntry 4 }
ospfv3VirtNbrAddress OBJECT-TYPE ospfv3VirtNbrAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (16)) SYNTAX InetAddress (SIZE (16))
MAX-ACCESS read-only MAX-ACCESS read-only
skipping to change at line 2337 skipping to change at line 2556
ship." ship."
::= { ospfv3VirtNbrEntry 7 } ::= { ospfv3VirtNbrEntry 7 }
ospfv3VirtNbrEvents OBJECT-TYPE ospfv3VirtNbrEvents OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of times this virtual link has "The number of times this virtual link has
changed its state, or an error has occurred." changed its state, or an error has occurred."
Internet Draft Expires October 2003 47
::= { ospfv3VirtNbrEntry 8 } ::= { ospfv3VirtNbrEntry 8 }
Internet Draft Expires October 2002 43
ospfv3VirtNbrLsRetransQLen OBJECT-TYPE ospfv3VirtNbrLsRetransQLen OBJECT-TYPE
SYNTAX Gauge32 SYNTAX Gauge32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The current length of the retransmission "The current length of the retransmission
queue." queue."
::= { ospfv3VirtNbrEntry 9 } ::= { ospfv3VirtNbrEntry 9 }
ospfv3VirtNbrHelloSuppressed OBJECT-TYPE ospfv3VirtNbrHelloSuppressed OBJECT-TYPE
skipping to change at line 2368 skipping to change at line 2588
ospfv3VirtNbrIfId OBJECT-TYPE ospfv3VirtNbrIfId OBJECT-TYPE
SYNTAX InterfaceIndex SYNTAX InterfaceIndex
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The interface ID that the neighbor advertises "The interface ID that the neighbor advertises
in its Hello Packets on this virtual link, that is, in its Hello Packets on this virtual link, that is,
the neighbor's local interface ID." the neighbor's local interface ID."
::= { ospfv3VirtNbrEntry 11 } ::= { ospfv3VirtNbrEntry 11 }
ospfv3VirtNbrRestartHelperStatus OBJECT-TYPE
SYNTAX INTEGER { notHelping (1),
helping (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the router is acting
as a hitless restart helper for the neighbor."
::= { ospfv3VirtNbrEntry 12 }
ospfv3VirtNbrRestartHelperAge OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remaining time in current OSPF hitless restart
interval, if the router is acting as a restart
helper for the neighbor."
::= { ospfv3VirtNbrEntry 13 }
ospfv3VirtNbrRestartHelperExitReason OBJECT-TYPE
Internet Draft Expires October 2003 48
SYNTAX INTEGER { none (1), -- not attempted
inProgress (2), -- restart in
-- progress
completed (3), -- successfully
-- completed
timedOut (4), -- timed out
topologyChanged (5) -- aborted due to
-- topology
-- change.
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the outcome of the last attempt at acting
as a hitless restart helper for the neighbor."
::= { ospfv3VirtNbrEntry 14 }
-- --
-- The OSPFv3 Area Aggregate Table -- The OSPFv3 Area Aggregate Table
-- --
ospfv3AreaAggregateTable OBJECT-TYPE ospfv3AreaAggregateTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3AreaAggregateEntry SYNTAX SEQUENCE OF Ospfv3AreaAggregateEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A range of IPv6 prefixes specified by a "A range of IPv6 prefixes specified by a
skipping to change at line 2392 skipping to change at line 2654
::= { ospfv3Objects 12 } ::= { ospfv3Objects 12 }
ospfv3AreaAggregateEntry OBJECT-TYPE ospfv3AreaAggregateEntry OBJECT-TYPE
SYNTAX Ospfv3AreaAggregateEntry SYNTAX Ospfv3AreaAggregateEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A range of IPv6 prefixes specified by a "A range of IPv6 prefixes specified by a
prefix/prefix length pair. Note that if prefix/prefix length pair. Note that if
ranges are configured such that one range sub- ranges are configured such that one range sub-
Internet Draft Expires October 2002 44
sumes another range the most specific match is sumes another range the most specific match is
the preferred one." the preferred one."
REFERENCE REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters" "OSPF Version 2, Appendix C.2 Area parameters"
INDEX { ospfv3AreaAggregateAreaID, INDEX { ospfv3AreaAggregateAreaID,
ospfv3AreaAggregateAreaLsdbType, ospfv3AreaAggregateAreaLsdbType,
ospfv3AreaAggregatePrefixType, ospfv3AreaAggregatePrefixType,
ospfv3AreaAggregatePrefix, ospfv3AreaAggregatePrefix,
ospfv3AreaAggregatePrefixLength } ospfv3AreaAggregatePrefixLength }
::= { ospfv3AreaAggregateTable 1 } ::= { ospfv3AreaAggregateTable 1 }
Internet Draft Expires October 2003 49
Ospfv3AreaAggregateEntry ::= SEQUENCE { Ospfv3AreaAggregateEntry ::= SEQUENCE {
ospfv3AreaAggregateAreaID ospfv3AreaAggregateAreaID
AreaID, AreaID,
ospfv3AreaAggregateAreaLsdbType ospfv3AreaAggregateAreaLsdbType
INTEGER, INTEGER,
ospfv3AreaAggregatePrefixType ospfv3AreaAggregatePrefixType
InetAddressType, InetAddressType,
ospfv3AreaAggregatePrefix ospfv3AreaAggregatePrefix
InetAddress, InetAddress,
ospfv3AreaAggregatePrefixLength ospfv3AreaAggregatePrefixLength
InetAddressPrefixLength, InetAddressPrefixLength,
ospfv3AreaAggregateStatus ospfv3AreaAggregateStatus
RowStatus, RowStatus,
ospfv3AreaAggregateEffect ospfv3AreaAggregateEffect
INTEGER,
ospfv3AreaAggregateRouteTag
INTEGER INTEGER
} }
ospfv3AreaAggregateAreaID OBJECT-TYPE ospfv3AreaAggregateAreaID OBJECT-TYPE
SYNTAX AreaID SYNTAX AreaID
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Area the Address Aggregate is to be found "The Area the Address Aggregate is to be found
within." within."
skipping to change at line 2447 skipping to change at line 2710
} }
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The type of the Address Aggregate. This field "The type of the Address Aggregate. This field
specifies the Area Lsdb type that this Address Ag- specifies the Area Lsdb type that this Address Ag-
gregate applies to." gregate applies to."
REFERENCE REFERENCE
"OSPF Version 2, Appendix A.4.1 The Link State "OSPF Version 2, Appendix A.4.1 The Link State
Advertisement header" Advertisement header"
Internet Draft Expires October 2002 45
::= { ospfv3AreaAggregateEntry 2 } ::= { ospfv3AreaAggregateEntry 2 }
ospfv3AreaAggregatePrefixType OBJECT-TYPE ospfv3AreaAggregatePrefixType OBJECT-TYPE
SYNTAX InetAddressType SYNTAX InetAddressType
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The prefix type of ospfv3AreaAggregatePrefix. Only "The prefix type of ospfv3AreaAggregatePrefix. Only
IPv6 addresses are expected." IPv6 addresses are expected."
Internet Draft Expires October 2003 50
::= { ospfv3AreaAggregateEntry 4 } ::= { ospfv3AreaAggregateEntry 4 }
ospfv3AreaAggregatePrefix OBJECT-TYPE ospfv3AreaAggregatePrefix OBJECT-TYPE
SYNTAX InetAddress (SIZE (0..16)) SYNTAX InetAddress (SIZE (0..16))
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The IPv6 Prefix." "The IPv6 Prefix."
REFERENCE REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters" "OSPF Version 2, Appendix C.2 Area parameters"
skipping to change at line 2502 skipping to change at line 2765
ospfv3AreaAggregateEffect OBJECT-TYPE ospfv3AreaAggregateEffect OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
advertiseMatching(1), advertiseMatching(1),
doNotAdvertiseMatching(2) doNotAdvertiseMatching(2)
} }
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Prefixes subsumed by ranges either trigger the "Prefixes subsumed by ranges either trigger the
advertisement of the indicated aggregate (ad- advertisement of the indicated aggregate (ad-
Internet Draft Expires October 2002 46
vertiseMatching), or result in the prefix not vertiseMatching), or result in the prefix not
being advertised at all outside the area." being advertised at all outside the area."
DEFVAL { advertiseMatching } DEFVAL { advertiseMatching }
::= { ospfv3AreaAggregateEntry 8 } ::= { ospfv3AreaAggregateEntry 8 }
ospfv3AreaAggregateRouteTag OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
Internet Draft Expires October 2003 51
DESCRIPTION
"This tag is advertised in the summarized NSSA LSA
only"
DEFVAL { 0 }
::= { ospfv3AreaAggregateEntry 9 }
-- conformance information -- conformance information
ospfv3Groups OBJECT IDENTIFIER ::= { ospfv3Conformance 1 } ospfv3Groups OBJECT IDENTIFIER ::= { ospfv3Conformance 1 }
ospfv3Compliances OBJECT IDENTIFIER ::= { ospfv3Conformance 2 } ospfv3Compliances OBJECT IDENTIFIER ::= { ospfv3Conformance 2 }
-- compliance statements -- compliance statements
ospfv3Compliance MODULE-COMPLIANCE ospfv3Compliance MODULE-COMPLIANCE
STATUS current STATUS current
DESCRIPTION "The compliance statement " DESCRIPTION "The compliance statement "
skipping to change at line 2551 skipping to change at line 2824
GROUP ospfv3LinkLsdbGroup GROUP ospfv3LinkLsdbGroup
DESCRIPTION DESCRIPTION
"This group is required for OSPFv3 systems that "This group is required for OSPFv3 systems that
display their Link-scope link state database." display their Link-scope link state database."
GROUP ospfv3HostGroup GROUP ospfv3HostGroup
DESCRIPTION DESCRIPTION
"This group is required for OSPFv3 systems that "This group is required for OSPFv3 systems that
support attached hosts." support attached hosts."
OBJECT ospfv3HostAddressType
SYNTAX InetAddressType { ipv6(2) }
DESCRIPTION
"An implementation is only required to support IPv6
address without zone index."
Internet Draft Expires October 2002 47
OBJECT ospfv3NbrAddressType OBJECT ospfv3NbrAddressType
SYNTAX InetAddressType { ipv6(2) } SYNTAX InetAddressType { ipv6(2) }
DESCRIPTION DESCRIPTION
"An implementation is only required to support IPv6 "An implementation is only required to support IPv6
address without zone index."
OBJECT ospfv3NbmaNbrAddressType Internet Draft Expires October 2003 52
SYNTAX InetAddressType { ipv6(2) }
DESCRIPTION
"An implementation is only required to support IPv6
address without zone index." address without zone index."
OBJECT ospfv3VirtNbrAddressType OBJECT ospfv3VirtNbrAddressType
SYNTAX InetAddressType { ipv6(2) } SYNTAX InetAddressType { ipv6(2) }
DESCRIPTION DESCRIPTION
"An implementation is only required to support IPv6 "An implementation is only required to support IPv6
address without zone index." address without zone index."
::= { ospfv3Compliances 1 } ::= { ospfv3Compliances 1 }
skipping to change at line 2591 skipping to change at line 2853
OBJECTS { OBJECTS {
ospfv3RouterId, ospfv3RouterId,
ospfv3AdminStat, ospfv3AdminStat,
ospfv3VersionNumber, ospfv3VersionNumber,
ospfv3AreaBdrRtrStatus, ospfv3AreaBdrRtrStatus,
ospfv3ASBdrRtrStatus, ospfv3ASBdrRtrStatus,
ospfv3AsScopeLsaCount, ospfv3AsScopeLsaCount,
ospfv3AsScopeLsaCksumSum, ospfv3AsScopeLsaCksumSum,
ospfv3OriginateNewLsas, ospfv3OriginateNewLsas,
ospfv3RxNewLsas, ospfv3RxNewLsas,
ospfv3ExtLsaCount,
ospfv3ExtAreaLsdbLimit, ospfv3ExtAreaLsdbLimit,
ospfv3MulticastExtensions, ospfv3MulticastExtensions,
ospfv3ExitOverflowInterval, ospfv3ExitOverflowInterval,
ospfv3DemandExtensions, ospfv3DemandExtensions,
ospfv3TrafficEngineeringSupport ospfv3TrafficEngineeringSupport,
ospfv3ReferenceBandwidth,
ospfv3RestartSupport,
ospfv3RestartInterval,
ospfv3RestartStatus,
ospfv3RestartAge,
ospfv3RestartExitReason
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"These objects are required for OSPFv3 systems." "These objects are required for OSPFv3 systems."
::= { ospfv3Groups 1 } ::= { ospfv3Groups 1 }
ospfv3AreaGroup OBJECT-GROUP ospfv3AreaGroup OBJECT-GROUP
OBJECTS { OBJECTS {
ospfv3ImportAsExtern, ospfv3ImportAsExtern,
ospfv3SpfRuns, ospfv3SpfRuns,
ospfv3AreaBdrRtrCount, ospfv3AreaBdrRtrCount,
ospfv3AsBdrRtrCount, ospfv3AsBdrRtrCount,
ospfv3AreaScopeLsaCount, ospfv3AreaScopeLsaCount,
ospfv3AreaScopeLsaCksumSum, ospfv3AreaScopeLsaCksumSum,
Internet Draft Expires October 2002 48
ospfv3AreaSummary, ospfv3AreaSummary,
ospfv3AreaStatus, ospfv3AreaStatus,
ospfv3StubMetric, ospfv3StubMetric,
Internet Draft Expires October 2003 53
ospfv3AreaNssaTranslatorRole, ospfv3AreaNssaTranslatorRole,
ospfv3AreaNssaTranslatorState, ospfv3AreaNssaTranslatorState,
ospfv3AreaNssaTranslatorStabilityInterval, ospfv3AreaNssaTranslatorStabilityInterval,
ospfv3AreaNssaTranslatorEvents ospfv3AreaNssaTranslatorEvents
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"These objects are required for OSPFv3 systems "These objects are required for OSPFv3 systems
supporting areas." supporting areas."
::= { ospfv3Groups 2 } ::= { ospfv3Groups 2 }
ospfv3AsLsdbGroup OBJECT-GROUP ospfv3AsLsdbGroup OBJECT-GROUP
OBJECTS { OBJECTS {
ospfv3AsLsdbSequence, ospfv3AsLsdbSequence,
ospfv3AsLsdbAge, ospfv3AsLsdbAge,
ospfv3AsLsdbChecksum, ospfv3AsLsdbChecksum,
ospfv3AsLsdbAdvertisement ospfv3AsLsdbAdvertisement,
ospfv3AsLsdbTypeKnown
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"These objects are required for OSPFv3 systems "These objects are required for OSPFv3 systems
that display their AS-scope link state database." that display their AS-scope link state database."
::= { ospfv3Groups 3 } ::= { ospfv3Groups 3 }
ospfv3AreaLsdbGroup OBJECT-GROUP ospfv3AreaLsdbGroup OBJECT-GROUP
OBJECTS { OBJECTS {
ospfv3AreaLsdbSequence, ospfv3AreaLsdbSequence,
ospfv3AreaLsdbAge, ospfv3AreaLsdbAge,
ospfv3AreaLsdbChecksum, ospfv3AreaLsdbChecksum,
ospfv3AreaLsdbAdvertisement ospfv3AreaLsdbAdvertisement,
ospfv3AreaLsdbTypeKnown
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"These objects are required for OSPFv3 systems "These objects are required for OSPFv3 systems
that display their Area-scope link state database." that display their Area-scope link state database."
::= { ospfv3Groups 4 } ::= { ospfv3Groups 4 }
ospfv3LinkLsdbGroup OBJECT-GROUP ospfv3LinkLsdbGroup OBJECT-GROUP
OBJECTS { OBJECTS {
ospfv3LinkLsdbSequence, ospfv3LinkLsdbSequence,
ospfv3LinkLsdbAge, ospfv3LinkLsdbAge,
ospfv3LinkLsdbChecksum, ospfv3LinkLsdbChecksum,
ospfv3LinkLsdbAdvertisement ospfv3LinkLsdbAdvertisement,
ospfv3LinkLsdbTypeKnown
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"These objects are required for OSPFv3 systems "These objects are required for OSPFv3 systems
that display their Link-scope link state database." that display their Link-scope link state database."
::= { ospfv3Groups 5 } ::= { ospfv3Groups 5 }
Internet Draft Expires October 2002 49 Internet Draft Expires October 2003 54
ospfv3HostGroup OBJECT-GROUP ospfv3HostGroup OBJECT-GROUP
OBJECTS { OBJECTS {
ospfv3HostMetric, ospfv3HostMetric,
ospfv3HostStatus, ospfv3HostStatus,
ospfv3HostAreaID ospfv3HostAreaID
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"These objects are required for OSPFv3 systems "These objects are required for OSPFv3 systems
that support attached hosts." that support attached hosts."
skipping to change at line 2699 skipping to change at line 2971
ospfv3IfState, ospfv3IfState,
ospfv3IfDesignatedRouter, ospfv3IfDesignatedRouter,
ospfv3IfBackupDesignatedRouter, ospfv3IfBackupDesignatedRouter,
ospfv3IfEvents, ospfv3IfEvents,
ospfv3IfStatus, ospfv3IfStatus,
ospfv3IfMulticastForwarding, ospfv3IfMulticastForwarding,
ospfv3IfDemand, ospfv3IfDemand,
ospfv3IfMetricValue, ospfv3IfMetricValue,
ospfv3IfLinkScopeLsaCount, ospfv3IfLinkScopeLsaCount,
ospfv3IfLinkLsaCksumSum, ospfv3IfLinkLsaCksumSum,
ospfv3IfInstId ospfv3IfInstId,
ospfv3IfDemandNbrProbe,
ospfv3IfDemandNbrProbeRetxLimit,
ospfv3IfDemandNbrProbeInterval
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"These interface objects are required for "These interface objects are required for
OSPFv3 systems." OSPFv3 systems."
::= { ospfv3Groups 7 } ::= { ospfv3Groups 7 }
ospfv3VirtIfGroup OBJECT-GROUP ospfv3VirtIfGroup OBJECT-GROUP
OBJECTS { OBJECTS {
ospfv3VirtIfIndex, ospfv3VirtIfIndex,
ospfv3VirtIfTransitDelay, ospfv3VirtIfTransitDelay,
ospfv3VirtIfRetransInterval, ospfv3VirtIfRetransInterval,
ospfv3VirtIfHelloInterval, ospfv3VirtIfHelloInterval,
ospfv3VirtIfRtrDeadInterval, ospfv3VirtIfRtrDeadInterval,
ospfv3VirtIfState, ospfv3VirtIfState,
ospfv3VirtIfEvents, ospfv3VirtIfEvents,
Internet Draft Expires October 2003 55
ospfv3VirtIfStatus, ospfv3VirtIfStatus,
ospfv3VirtIfLinkScopeLsaCount, ospfv3VirtIfLinkScopeLsaCount,
ospfv3VirtIfLinkLsaCksumSum ospfv3VirtIfLinkLsaCksumSum
Internet Draft Expires October 2002 50
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"These virtual interface objects are required for "These virtual interface objects are required for
OSPFv3 systems." OSPFv3 systems."
::= { ospfv3Groups 8 } ::= { ospfv3Groups 8 }
ospfv3NbrGroup OBJECT-GROUP ospfv3NbrGroup OBJECT-GROUP
OBJECTS { OBJECTS {
ospfv3NbrAddressType, ospfv3NbrAddressType,
ospfv3NbrAddress, ospfv3NbrAddress,
ospfv3NbrOptions, ospfv3NbrOptions,
ospfv3NbrPriority, ospfv3NbrPriority,
ospfv3NbrState, ospfv3NbrState,
ospfv3NbrEvents, ospfv3NbrEvents,
ospfv3NbrLsRetransQLen, ospfv3NbrLsRetransQLen,
ospfv3NbrHelloSuppressed, ospfv3NbrHelloSuppressed,
ospfv3NbrIfId ospfv3NbrIfId,
ospfv3NbrRestartHelperStatus,
ospfv3NbrRestartHelperAge,
ospfv3NbrRestartHelperExitReason
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"These neighbor objects are required for "These neighbor objects are required for
OSPFv3 systems." OSPFv3 systems."
::= { ospfv3Groups 9 } ::= { ospfv3Groups 9 }
ospfv3NbmaNbrGroup OBJECT-GROUP ospfv3NbmaNbrGroup OBJECT-GROUP
OBJECTS { OBJECTS {
ospfv3NbmaNbrPriority, ospfv3NbmaNbrPriority,
skipping to change at line 2768 skipping to change at line 3046
::= { ospfv3Groups 10 } ::= { ospfv3Groups 10 }
ospfv3VirtNbrGroup OBJECT-GROUP ospfv3VirtNbrGroup OBJECT-GROUP
OBJECTS { OBJECTS {
ospfv3VirtNbrIfIndex, ospfv3VirtNbrIfIndex,
ospfv3VirtNbrAddressType, ospfv3VirtNbrAddressType,
ospfv3VirtNbrAddress, ospfv3VirtNbrAddress,
ospfv3VirtNbrOptions, ospfv3VirtNbrOptions,
ospfv3VirtNbrState, ospfv3VirtNbrState,
ospfv3VirtNbrEvents, ospfv3VirtNbrEvents,
Internet Draft Expires October 2003 56
ospfv3VirtNbrLsRetransQLen, ospfv3VirtNbrLsRetransQLen,
ospfv3VirtNbrHelloSuppressed, ospfv3VirtNbrHelloSuppressed,
ospfv3VirtNbrIfId ospfv3VirtNbrIfId,
ospfv3VirtNbrRestartHelperStatus,
ospfv3VirtNbrRestartHelperAge,
ospfv3VirtNbrRestartHelperExitReason
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
Internet Draft Expires October 2002 51
"These virtual neighbor objects are required for "These virtual neighbor objects are required for
OSPFv3 systems." OSPFv3 systems."
::= { ospfv3Groups 11 } ::= { ospfv3Groups 11 }
ospfv3AreaAggregateGroup OBJECT-GROUP ospfv3AreaAggregateGroup OBJECT-GROUP
OBJECTS { OBJECTS {
ospfv3AreaAggregateStatus, ospfv3AreaAggregateStatus,
ospfv3AreaAggregateEffect ospfv3AreaAggregateEffect,
ospfv3AreaAggregateRouteTag
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"These area aggregate objects are required for "These area aggregate objects are required for
OSPFv3 systems." OSPFv3 systems."
::= { ospfv3Groups 12 } ::= { ospfv3Groups 12 }
END END
6. Acknowledgements 6. Acknowledgements
This document is based on the MIB for OSPF version 2 by Rob This document is based on the MIB for OSPF version 2 by Rob
Coltun and Fred Baker [18]. Coltun and Fred Baker [18]. The authors would like to thank
Toshiaki Takada for his insightful comments. Thanks also to
Ramachandran Radhakrishnan, Harikrishna Golapalli and Mahesh
Kurapati for their help too.
7. References 7. References
[1] Harrington, D., Presuhn, R., and B. Wijnen, "An [1] Harrington, D., Presuhn, R., and B. Wijnen, "An
Architecture for Describing SNMP Management Frameworks", Architecture for Describing SNMP Management Frameworks",
[2] Rose, M., and K. McCloghrie, "Structure and [2] Rose, M., and K. McCloghrie, "Structure and
Identification of Management Information for TCP/IP-based Identification of Management Information for TCP/IP-based
[3] Rose, M., and K. McCloghrie, "Concise MIB Definitions", [3] Rose, M., and K. McCloghrie, "Concise MIB Definitions",
[4] M. Rose, "A Convention for Defining Traps for use with [4] M. Rose, "A Convention for Defining Traps for use with
[5] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., [5] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M., and S. Waldbusser, "Structure of Management Rose, M., and S. Waldbusser, "Structure of Management
Internet Draft Expires October 2003 57
Information Version 2 (SMIv2)", STD 58, RFC 2578, April Information Version 2 (SMIv2)", STD 58, RFC 2578, April
1999 1999
[6] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., [6] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M., and S. Waldbusser, "Textual Conventions for Rose, M., and S. Waldbusser, "Textual Conventions for
[7] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., [7] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M., and S. Waldbusser, "Conformance Statements for Rose, M., and S. Waldbusser, "Conformance Statements for
[8] Case, J., Fedor, M., Schoffstall, M., and J. Davin, [8] Case, J., Fedor, M., Schoffstall, M., and J. Davin,
"Simple Network Management Protocol", STD 15, RFC 1157, "Simple Network Management Protocol", STD 15, RFC 1157,
Internet Draft Expires October 2002 52
May 1990. May 1990.
[9] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, [9] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser,
"Introduction to Community-based SNMPv2", RFC 1901, "Introduction to Community-based SNMPv2", RFC 1901,
January 1996. January 1996.
[10] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, [10] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser,
"Transport Mappings for Version 2 of the Simple Network "Transport Mappings for Version 2 of the Simple Network
Management Protocol (SNMPv2)", RFC 1906, January 1996. Management Protocol (SNMPv2)", RFC 1906, January 1996.
skipping to change at line 2849 skipping to change at line 3134
Access Control Model (VACM) for the Simple Network Access Control Model (VACM) for the Simple Network
[16] Case, J., Mundy, R., Partain, D., and B. Stewart, [16] Case, J., Mundy, R., Partain, D., and B. Stewart,
"Introduction to Version 3 of the Internet-standard "Introduction to Version 3 of the Internet-standard
[17] Deering, S., and R. Hinden, "Internet Protocol, Version 6 [17] Deering, S., and R. Hinden, "Internet Protocol, Version 6
(IPv6) Specification", RFC 2460, December 1998. (IPv6) Specification", RFC 2460, December 1998.
[18] Baker, F., and Coltun, R., "OSPF Version 2 Management [18] Baker, F., and Coltun, R., "OSPF Version 2 Management
Information Base", RFC 1850, November 1995. Information Base", RFC 1850, November 1995.
[19] Coltun, R., Ferguson, D., Moy, J., "OSPF for IPv6", RFC [19] Coltun, R., Ferguson, D., Moy, J., "OSPF for IPv6", RFC
Internet Draft Expires October 2003 58
2740, December 1999. 2740, December 1999.
[20] Haskin, D., Onishi, S., "Management Information Base for [20] Haskin, D., Onishi, S., "Management Information Base for
IP Version 6: Textual Conventions and General Group", RFC IP Version 6: Textual Conventions and General Group", RFC
2465, December 1998. 2465, December 1998.
[21] Moy, J., "OSPF Version 2", RFC 2328, April 1998. [21] Moy, J., "OSPF Version 2", RFC 2328, April 1998.
8. Security Considerations 8. Security Considerations
There are a number of management objects defined in this MIB There are a number of management objects defined in this MIB
Internet Draft Expires October 2002 53
that have a MAX-ACCESS clause of read-write and/or read- that have a MAX-ACCESS clause of read-write and/or read-
create. Such objects may be considered sensitive or create. Such objects may be considered sensitive or
vulnerable in some network environments. The support for SET vulnerable in some network environments. The support for SET
operations in a non-secure environment without proper operations in a non-secure environment without proper
protection can have a negative effect on network operations. protection can have a negative effect on network operations.
SNMPv1 by itself is not a secure environment. Even if the network SNMPv1 by itself is not a secure environment. Even if the network
itself is secure (for example by using IPSec), even then, there is itself is secure (for example by using IPSec), even then, there is
no control as to who on the secure network is allowed to access and no control as to who on the secure network is allowed to access and
GET/SET (read/change/create/delete) the objects in this MIB. GET/SET (read/change/create/delete) the objects in this MIB.
It is recommended that the implementers consider the security It is recommended that the implementers consider the security
features as provided by the SNMPv3 framework. Specifically, the use features as provided by the SNMPv3 framework. Specifically, the use
of the User-based Security Model RFC 2574 [12] and the View- of the User-based Security Model RFC 2574 [12] and the View-
based Access Control Model RFC 2575 [15] is recommended. based Access Control Model RFC 2575 [15] is recommended.
skipping to change at line 2887 skipping to change at line 3171
It is then a customer/user responsibility to ensure that the SNMP It is then a customer/user responsibility to ensure that the SNMP
entity giving access to an instance of this MIB, is properly entity giving access to an instance of this MIB, is properly
configured to give access to the objects only to those principals configured to give access to the objects only to those principals
(users) that have legitimate rights to indeed GET or SET (users) that have legitimate rights to indeed GET or SET
(change/create/delete) them. (change/create/delete) them.
9. Authors' Addresses 9. Authors' Addresses
Dan Joyal Dan Joyal
Lucent Technologies Nortel Networks
One Robbins Road 600 Technology Park Drive
Westford, MA 01886 Billerica, MA 01821
Email: joyal@lucent.com Email: djoyal@nortelnetworks.com
Jacek Kwiatkowski Jacek Kwiatkowski
Intel Technology Poland Intel Technology Poland
ul. Slowackiego 173 ul. Slowackiego 173
80-298 Gdansk, Poland 80-298 Gdansk, Poland
Email: jacek.kwiatkowski@intel.com Email: jacek.kwiatkowski@intel.com
Vishwas Manral
Internet Draft Expires October 2003 59
Motorola Inc.
189, Prashasan Nagar
Road Number 72
Jubilee Hills
Hyderabad, India
Email: vishwas@motorola.com
Sebastian Zwolinski Sebastian Zwolinski
Intel Technology Poland Intel Technology Poland
ul. Slowackiego 173 ul. Slowackiego 173
80-298 Gdansk, Poland 80-298 Gdansk, Poland
Email: sebastian.zwolinski@intel.com Email: sebastian.zwolinski@intel.com
A. Differences from RFC 1850 A. Differences from RFC 1850
(1) Textual Conventions are imported from INET-ADDRESS-MIB, (1) Textual Conventions are imported from INET-ADDRESS-MIB,
IF-MIB and OSPF-MIB MIBs. IF-MIB and OSPF-MIB MIBs.
Internet Draft Expires October 2002 54
(2) The "ospf" prefix for entity names is changed to (2) The "ospf" prefix for entity names is changed to
"ospfv3". "ospfv3".
(3) General Group object name ospfVersionNumber is changed to (3) General Group object name ospfVersionNumber is changed to
ospfv3VersionNumber and its value is changed from 2 to 3. ospfv3VersionNumber and its value is changed from 2 to 3.
(4) General Group object name ospfExternLsaCount is changed (4) General Group object name ospfExternLsaCount is changed
to ospfv3AsScopeLsaCount to indicate count of all AS- to ospfv3AsScopeLsaCount to indicate count of all AS-
scoped LSAs in the database. scoped LSAs in the database.
skipping to change at line 2941 skipping to change at line 3234
(9) Removed OSPF Area Default Metric Table. (9) Removed OSPF Area Default Metric Table.
(10) Added object ospfv3StubMetric to Area entry as substitute (10) Added object ospfv3StubMetric to Area entry as substitute
for Area Default Metric Table. for Area Default Metric Table.
(11) Changed name of External LSDB Table to AS-Scope LSDB (11) Changed name of External LSDB Table to AS-Scope LSDB
Table. Replaced object name prefix "ospfExtLsdb" with Table. Replaced object name prefix "ospfExtLsdb" with
"ospfv3AsLsdb". "ospfv3AsLsdb".
Internet Draft Expires October 2003 60
(12) Changed name of LSDB Table to Area-Scope LSDB Table. (12) Changed name of LSDB Table to Area-Scope LSDB Table.
Replaced object name prefix "ospfLsdb" with Replaced object name prefix "ospfLsdb" with
"ospfv3AreaLsdb". "ospfv3AreaLsdb".
(13) Added ospfv3LinkLsdbTable which contains all LSAs of (13) Added ospfv3LinkLsdbTable which contains all LSAs of
Link-Scope. Index of ospfv3LinkLsdbTable is interface Link-Scope. Index of ospfv3LinkLsdbTable is interface
index, LSA Type, Router ID and LSID. index, LSA Type, Router ID and LSID.
(14) Re-ordered Router ID and LSID index components of LSDB (14) Re-ordered Router ID and LSID index components of LSDB
table entries. Since LSIDs no longer have addressing table entries. Since LSIDs no longer have addressing
skipping to change at line 2962 skipping to change at line 3256
useful when the Router ID component comes before the LSID useful when the Router ID component comes before the LSID
component. component.
(15) Address Range Table is removed. (15) Address Range Table is removed.
(16) Removed ospfHostTOS from Host Table entry. Object (16) Removed ospfHostTOS from Host Table entry. Object
ospfHostIpAddress changed to ospfv3HostAddress with ospfHostIpAddress changed to ospfv3HostAddress with
SYNTAX changed from IpAddress to InetAddress. SYNTAX changed from IpAddress to InetAddress.
(17) Added object ospfv3HostAddressType to Host Table entry to (17) Added object ospfv3HostAddressType to Host Table entry to
Internet Draft Expires October 2002 55
determine the address type of ospfv3HostAddress. determine the address type of ospfv3HostAddress.
(18) The MAX-ACCESS value of object ospfv3HostAreaID is (18) The MAX-ACCESS value of object ospfv3HostAreaID is
changed to read-create. changed to read-create.
(19) Objects ospfIfIpAddress and ospfAddressLessIf removed (19) Objects ospfIfIpAddress and ospfAddressLessIf removed
from Interface entry and as Interface Table entry index from Interface entry and as Interface Table entry index
components. components.
(20) Object ospfv3IfIndex added to Interface Table entry with (20) Object ospfv3IfIndex added to Interface Table entry with
skipping to change at line 2997 skipping to change at line 3289
Link-Scope LSA database associated with the interface. Link-Scope LSA database associated with the interface.
(24) Removed OSPF Interface Metric Table. Metric is now (24) Removed OSPF Interface Metric Table. Metric is now
accessed via object ospfv3IfMetricValue in the Interface accessed via object ospfv3IfMetricValue in the Interface
entry. entry.
(25) Added object ospfv3IfInstId to Interface entry to enable (25) Added object ospfv3IfInstId to Interface entry to enable
the setting of the interface instance value of the the setting of the interface instance value of the
interface. The default value is zero. interface. The default value is zero.
Internet Draft Expires October 2003 61
(26) Added object ospfv3VirtIfIndex to Virtual Interface entry (26) Added object ospfv3VirtIfIndex to Virtual Interface entry
which is used to assign a local interface ID to the which is used to assign a local interface ID to the
virtual interface. virtual interface.
(27) Added objects ospfv3VirtIfLinkScopeLsaCount and (27) Added objects ospfv3VirtIfLinkScopeLsaCount and
ospfv3VirtIfLinkLsaCksumSum to Virtual Interface entry. ospfv3VirtIfLinkLsaCksumSum to Virtual Interface entry.
They maintain the count of Link-Scope LSAs and the They maintain the count of Link-Scope LSAs and the
checksum of the Link-Scope LSA database associated with checksum of the Link-Scope LSA database associated with
the virtual interface. the virtual interface.
skipping to change at line 3018 skipping to change at line 3311
and it contains only the neighbors that were learned from and it contains only the neighbors that were learned from
LSAs. LSAs.
(29) Removed objects ospfNbrIpAddr and ospfNbrAddressLessIndex (29) Removed objects ospfNbrIpAddr and ospfNbrAddressLessIndex
from Neighbor entry. from Neighbor entry.
(30) Added object ospfv3NbrIfIndex to Neighbor entry. Index (30) Added object ospfv3NbrIfIndex to Neighbor entry. Index
components ospfNbrIpAddr and ospfNbrAddressLessIndex are components ospfNbrIpAddr and ospfNbrAddressLessIndex are
replaced with ospfv3NbrIfIndex and ospfv3NbrRtrId. replaced with ospfv3NbrIfIndex and ospfv3NbrRtrId.
Internet Draft Expires October 2002 56
(31) Added object ospfv3NbrAddressType to Neighbor entry to (31) Added object ospfv3NbrAddressType to Neighbor entry to
determine the address type of ospfv3NbrAddress. determine the address type of ospfv3NbrAddress.
(32) Added object ospfv3NbrAddress to Neighbor entry. This (32) Added object ospfv3NbrAddress to Neighbor entry. This
object contains the neighbor's IPv6 address. object contains the neighbor's IPv6 address.
(33) Removed objects ospfNbmaNbrStatus and (33) Removed objects ospfNbmaNbrStatus and
ospfNbmaNbrPermanence from Neighbor entry. ospfNbmaNbrPermanence from Neighbor entry.
(34) Added object ospfv3NbrIfId to Neighbor entry. This object (34) Added object ospfv3NbrIfId to Neighbor entry. This object
skipping to change at line 3049 skipping to change at line 3341
ospfv3NbmaAddressType, ospfv3NbmaNbrAddress. ospfv3NbmaAddressType, ospfv3NbmaNbrAddress.
(37) Added object ospfv3VirtNbrIfIndex to Virtual Neighbor (37) Added object ospfv3VirtNbrIfIndex to Virtual Neighbor
entry. This is the interface index of the virtual link entry. This is the interface index of the virtual link
over which the virtual neighbor is reached. over which the virtual neighbor is reached.
(38) Changed object name ospfVirtNbrIpAddr to (38) Changed object name ospfVirtNbrIpAddr to
ospfv3VirtNbrAddress and SYNTAX from IpAddress to ospfv3VirtNbrAddress and SYNTAX from IpAddress to
InetAddress. InetAddress.
Internet Draft Expires October 2003 62
(39) Added object ospfv3VirtNbrAddressType to Virtual Neighbor (39) Added object ospfv3VirtNbrAddressType to Virtual Neighbor
entry to determine the address type of entry to determine the address type of
ospfv3VirtNbrAddress. ospfv3VirtNbrAddress.
(40) Added object ospfv3VirtNbrIfId to Virtual Neighbor entry. (40) Added object ospfv3VirtNbrIfId to Virtual Neighbor entry.
This is the virtual neighbor's local virtual interface This is the virtual neighbor's local virtual interface
index from the neighbor's hellos advertised on the index from the neighbor's hellos advertised on the
virtual link. virtual link.
(41) Changed object name ospfAreaAggregateMask to (41) Changed object name ospfAreaAggregateMask to
skipping to change at line 3070 skipping to change at line 3363
to InetAddressPrefixLength. to InetAddressPrefixLength.
(42) Changed object name ospfAreaAggregateNet to (42) Changed object name ospfAreaAggregateNet to
ospfv3AreaAggregatePrefix and SYNTAX from IpAddress to ospfv3AreaAggregatePrefix and SYNTAX from IpAddress to
InetAddress. InetAddress.
(43) Added object ospfv3AreaAggregatePrefixType to Area (43) Added object ospfv3AreaAggregatePrefixType to Area
Aggregate entry to determine the address type of Aggregate entry to determine the address type of
ospfv3AreaAggregatePrefix. ospfv3AreaAggregatePrefix.
Internet Draft Expires October 2002 57
(44) Index for Area Aggregate Table entry changed from (44) Index for Area Aggregate Table entry changed from
ospfAreaAggregateAreaID, ospfAreaAggregateLsdbType, ospfAreaAggregateAreaID, ospfAreaAggregateLsdbType,
ospfAreaAggregateNet, ospfAreaAggregateMask to ospfAreaAggregateNet, ospfAreaAggregateMask to
ospfv3AreaAggregateAreaID, ospfv3AreaAggregateAreaID,
ospfv3AreaAggregateAreaLsdbType, ospfv3AreaAggregateAreaLsdbType,
ospfv3AreaAggregatePrefixType, ospfv3AreaAggregatePrefix, ospfv3AreaAggregatePrefixType, ospfv3AreaAggregatePrefix,
ospfv3AreaAggregatePrefixLength. ospfv3AreaAggregatePrefixLength.
(45) Conformance information is changed to reflect object (45) Conformance information is changed to reflect object
groups removed or added. groups removed or added.
skipping to change at line 3102 skipping to change at line 3394
ospfv3VirtIfRtrDeadInterval. ospfv3VirtIfRtrDeadInterval.
(48) Changed SYNTAX from PositiveInteger to Unsigned32 for (48) Changed SYNTAX from PositiveInteger to Unsigned32 for
the following objects: ospfv3ExitOverflowInterval, the following objects: ospfv3ExitOverflowInterval,
ospfv3IfRtrDeadInterval, ospfv3IfPollInterval, ospfv3IfRtrDeadInterval, ospfv3IfPollInterval,
ospfv3VirtIfRtrDeadInterval. ospfv3VirtIfRtrDeadInterval.
(49) Changed MAX-ACCESS of row indices from read-only to (49) Changed MAX-ACCESS of row indices from read-only to
not-accessible. not-accessible.
Internet Draft Expires October 2003 63
(50) Added a new object ospfv3ExtLsaCount for support of RFC1765.
(51) Compiled cleanly the MIB using "smilint -m -s -l 9 -i
namelength-32".
(52) Removed LSA type enumerations from the LSDB tables, but
ranges added as required by compiler.
(53) Added object to LSDB tables to check if the LSA is locally
originated
(54) Add External Route Tag to AreaAggregate Table for NSSA.
(55) Added Object for OSPFv3 Reference bandwidth.
(56) Hitless restart objects to general group.
(57) Hitless restart Objects to NBR MIBS.
(58) ospfv3AreaSummary default value has been changed to import
summary LSA's in line with RFC3101.
(59) Added support for inactive neighbor probing support over DC.
(60) Removed ospfv3HostAddressType and ospfv3NbmaNbrAddressType
from the compliance module to get compiler over warnings.
The information is already there in the description.
(61) Changed description of ospfv3IfMetricValue to also refer
to the new Reference Bandwidth general group object.
Full Copyright Statement Full Copyright Statement
Copyright (C) The Internet Society (2001). All Rights Copyright (C) The Internet Society (2001). All Rights
Reserved. Reserved.
This document and translations of it may be copied and This document and translations of it may be copied and
furnished to others, and derivative works that comment on or furnished to others, and derivative works that comment on or
otherwise explain it or assist in its implementation may be otherwise explain it or assist in its implementation may be
prepared, copied, published and distributed, in whole or in prepared, copied, published and distributed, in whole or in
part, without restriction of any kind, provided that the above part, without restriction of any kind, provided that the above
copyright notice and this paragraph are included on all such copyright notice and this paragraph are included on all such
copies and derivative works. However, this document itself copies and derivative works. However, this document itself
may not be modified in any way, such as by removing the may not be modified in any way, such as by removing the
copyright notice or references to the Internet Society or copyright notice or references to the Internet Society or
other Internet organizations, except as needed for the purpose other Internet organizations, except as needed for the purpose
of developing Internet standards in which case the procedures of developing Internet standards in which case the procedures
for copyrights defined in the Internet Standards process must for copyrights defined in the Internet Standards process must
be followed, or as required to translate it into languages be followed, or as required to translate it into languages
other than English. other than English.
Internet Draft Expires October 2002 58
The limited permissions granted above are perpetual and will The limited permissions granted above are perpetual and will
not be revoked by the Internet Society or its successors or not be revoked by the Internet Society or its successors or
assigns. assigns.
This document and the information contained herein is provided This document and the information contained herein is provided
on an "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET on an "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET
ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE
USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR
ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. PARTICULAR PURPOSE.
Internet Draft Expires October 2002 59 Internet Draft Expires October 2003 64
 End of changes. 155 change blocks. 
163 lines changed or deleted 475 lines changed or added

This html diff was produced by rfcdiff 1.34. The latest version is available from http://tools.ietf.org/tools/rfcdiff/