Network Working Group                               E. Hammer-Lahav, Ed.
Internet-Draft                                                    Yahoo!
Intended status: Standards Track                             D. Recordon
Expires: December 11, 13, 2010                                      Facebook
                                                                D. Hardt
                                                               Microsoft
                                                           June 9, 11, 2010

                         The OAuth 2.0 Protocol
                         draft-ietf-oauth-v2-06
                         draft-ietf-oauth-v2-07

Abstract

   This specification describes the OAuth 2.0 protocol.  OAuth provides
   a method for making authenticated HTTP requests using a token - an
   string used to denote an access grant with specific scope, duration,
   and other attributes.  Tokens are issued to third-party clients by an
   authorization server with the approval of the resource owner.  OAuth
   defines multiple flows for obtaining a token to support a wide range
   of client types and user experience.

Status of this Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on December 11, 13, 2010.

Copyright Notice

   Copyright (c) 2010 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  4
     1.1.  Terminology  . . . . . . . . . . . . . . . . . . . . . . .  4
     1.2.  Overview . . . . . . . . . . . . . . . . . . . . . . . . .  6
     1.3.  Example  . . . . . . . . . . . . . . . . . . . . . . . . .  8
     1.4.  Notational Conventions . . . . . . . . . . . . . . . . . .  8
   2.  Obtaining an Access Token  . .  Client Flows . . . . . . . . . . . . . . . .  8
     2.1.  Client Credentials . . . . . . . . .  8
     2.1.  Web Server Flow  . . . . . . . . . . .  9
     2.2.  End-User Endpoint . . . . . . . . . .  8
     2.2.  User-Agent Flow  . . . . . . . . . .  9
     2.3.  Token Endpoint . . . . . . . . . . . 10
     2.3.  Username and Password Flow . . . . . . . . . . . 10
       2.3.1.  Client Authentication . . . . . 11
     2.4.  Client Credentials Flow  . . . . . . . . . . . 10
       2.3.2.  Response Format . . . . . . 13
     2.5.  Assertion Flow . . . . . . . . . . . . . 11
     2.4.  Flow Parameters . . . . . . . . . 13
     2.6.  Native Application Considerations  . . . . . . . . . . . . 14
     2.5.  Web Server Flow
   3.  Client Credentials . . . . . . . . . . . . . . . . . . . . . 14
       2.5.1. . 15
     3.1.  Client Requests Authorization Authentication  . . . . . . . . . . . . . 16
       2.5.2.  Client Requests Access Token . . . . . 15
   4.  Establishing Resource Owner Authorization  . . . . . . . . 18
     2.6.  User-Agent Flow . . 16
     4.1.  Verification Code  . . . . . . . . . . . . . . . . . . . . 20
       2.6.1.  Client Requests 17
       4.1.1.  End-User Authorization Endpoint  . . . . . . . . . . . 17
     4.2.  Resource Owner Credentials . 22
       2.6.2.  Client Extracts Access Token . . . . . . . . . . . . . 25
     2.7.  Device Flow . . 20
     4.3.  Assertion  . . . . . . . . . . . . . . . . . . . . . 25
       2.7.1.  Client Requests Authorization . . . 21
   5.  Obtaining an Access Token  . . . . . . . . . 27
       2.7.2.  Client Requests Access Token . . . . . . . . . 21
     5.1.  Token Endpoint . . . . 29
     2.8.  Username and Password Flow . . . . . . . . . . . . . . . . 31
       2.8.1.  Client Requests Access Token . . 21
       5.1.1.  Verification Code  . . . . . . . . . . . 32
     2.9.  Client Credentials Flow . . . . . . . 22
       5.1.2.  Resource Owner Credentials . . . . . . . . . . 34
       2.9.1.  Client Requests Access Token . . . . 22
       5.1.3.  Assertion  . . . . . . . . . 35
     2.10. Assertion Flow . . . . . . . . . . . . . 23
       5.1.4.  Refresh Token  . . . . . . . . . 36
       2.10.1. Client Requests Access Token . . . . . . . . . . . 24
       5.1.5.  Access Token Response  . . 37
     2.11. Native Application Considerations . . . . . . . . . . . . 39
   3.  Refreshing an Access Token . . 25
       5.1.6.  Error Response . . . . . . . . . . . . . . . . . . 40
   4. . . 26
   6.  Accessing a Protected Resource . . . . . . . . . . . . . . . . 42
     4.1. 27
     6.1.  The Authorization Request Header . . . . . . . . . . . . . 43
     4.2. 28
     6.2.  URI Query Parameter  . . . . . . . . . . . . . . . . . . . 44
     4.3. 28
     6.3.  Form-Encoded Body Parameter  . . . . . . . . . . . . . . . 44
   5. 29
   7.  Identifying a Protected Resource . . . . . . . . . . . . . . . 45
     5.1. 30
     7.1.  The WWW-Authenticate Response Header . . . . . . . . . . . 45
   6. 30
   8.  Security Considerations  . . . . . . . . . . . . . . . . . . . 46
   7. 31
   9.  IANA Considerations  . . . . . . . . . . . . . . . . . . . . . 46 31
   Appendix A.  Contributors  . . . . . . . . . . . . . . . . . . . . 46 31
   Appendix B.  Acknowledgements  . . . . . . . . . . . . . . . . . . 47 31
   Appendix C.  Differences from OAuth 1.0a . . . . . . . . . . . . . 47
   Appendix D.  Document History  . . . . . . . . . . . . . . . . . . 47
   8. 32
   10. References . . . . . . . . . . . . . . . . . . . . . . . . . . 49
     8.1. 34
     10.1. Normative References . . . . . . . . . . . . . . . . . . . 49
     8.2. 34
     10.2. Informative References . . . . . . . . . . . . . . . . . . 50 35
   Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 51 36

1.  Introduction

   With the increasing use of distributed web services and cloud
   computing, third-party applications require access to server-hosted
   resources.  These resources are usually protected and require
   authentication using the resource owner's credentials (typically a
   username and password).  In the traditional client-server
   authentication model, a client accessing a protected resource on a
   server presents the resource owner's credentials in order to
   authenticate and gain access.

   Resource owners should not be required to share their credentials
   when granting third-party applications access to their protected
   resources.  They should also have the ability to restrict access to a
   limited subset of the resources they control, to limit access
   duration, or to limit access to the HTTP methods supported by these
   resources.

   OAuth provides a method for making authenticated HTTP requests using
   a token - an identifier used to denote an access grant with specific
   scope, duration, and other attributes.  Tokens are issued to third-
   party clients by an authorization server with the approval of the
   resource owner.  Instead of sharing their credentials with the
   client, resource owners grant access by authenticating directly with
   the authorization server which in turn issues a token to the client.
   The client uses the token to authenticate with the resource server
   and gain access.

   For example, a web user (resource owner) can grant a printing service
   (client) access to her protected photos stored at a photo sharing
   service (resource server), without sharing her username and password
   with the printing service.  Instead, she authenticates directly with
   the photo sharing service (authorization server) which issues the
   printing service delegation-specific credentials (token).

   This specification defines the use of OAuth over HTTP [RFC2616] (or
   HTTP over TLS as defined by [RFC2818]).  Other specifications may
   extend it for use with other transport protocols.

1.1.  Terminology

   resource server
         An HTTP [RFC2616] server capable of accepting authenticated
         resource requests using the OAuth protocol.

   protected resource
         An access-restricted resource which can be obtained from a
         resource server using an OAuth-authenticated request.

   client
         An HTTP client capable of making authenticated requests for
         protected resources using the OAuth protocol.

   resource owner
         An entity capable of granting access to a protected resource.

   end-user
         A human resource owner.

   token
         A string representing an access grant issued to the client.
         The string is usually opaque to the client and can self-contain
         the authorization information in a verifiable manner (i.e.
         signed), or denotes an identifier used to retrieve the
         authorization information.

   access token
         A token used by the client to make authenticated requests on
         behalf of the resource owner.  Access tokens represent a
         specific scope, duration, and other access attributes granted
         by the resource owner and enforced by the resource and
         authorization servers.

   refresh token
         A token used by the client to replace an expired access token
         with a new access token without having to involve the resource
         owner.  A refresh token is used when the access token is valid
         for a shorter time period than the duration of the access grant
         approved
         granted by the resource owner.

   authorization server
         An HTTP server capable of issuing tokens after successfully
         authenticating the resource owner and obtaining authorization.
         The authorization server may be the same server as the resource
         server, or a separate entity.

   end-user authorization endpoint
         The authorization server's HTTP endpoint capable of
         authenticating the end-user and obtaining authorization.

   token endpoint
         The authorization server's HTTP endpoint capable of issuing
         tokens and refreshing expired tokens.

   client identifier
         An unique identifier issued to the client to identify itself to
         the authorization server.  Client identifiers may have a
         matching secret.

1.2.  Overview

   Clients interact with a protected resource, first by requesting
   access (which is granted in the form of an access token) from the
   authorization server, and then by authenticating with the resource
   server by presenting the access token.  Figure 1 demonstrates the
   flow between the client and authorization server (A, B), and the flow
   between the client and resource server (C, D), when the client is
   acting autonomously (the client is also the resource owner).

     +--------+                                  +---------------+
     |        |--(A)------ Credentials --------->| Authorization |
     |        |                                  |    Server     |
     |        |<-(B)------ Access Token ---------|               |
     |        |      (w/ Optional Refresh Token) +---------------+
     | Client |
     |        |            HTTP Request          +---------------+
     |        |--(C)--- with Access Token ------>|    Resource   |
     |        |                                  |     Server    |
     |        |<-(D)------ HTTP Response --------|               |
     +--------+                                  +---------------+

                   Figure 1: Generic Client-Server Flow

   Access token strings can use any internal structure agreed upon
   between the authorization server and the resource server, but their
   structure is opaque to the client.  Since the access token provides
   the client access to the protected resource for the life of the
   access token (or until revoked), the authorization server should
   issue access tokens which expire within an appropriate time, usually
   much shorter than the duration of the access grant.

   When an access token expires, the client can request a new access
   token from the authorization server by presenting its credentials
   again (Figure 1), or by using the refresh token (if issued with the
   access token) as shown in Figure 2.  Once an expired access token has
   been replaced with a new access token (A, B), the client uses the new
   access token as before (C, D).

     +--------+                                  +---------------+
     |        |--(A)------ Refresh Token ------->| Authorization |
     |        |                                  |    Server     |
     |        |<-(B)------ Access Token ---------|               |
     |        |                                  +---------------+
     | Client |
     |        |            HTTP Request          +---------------+
     |        |--(C)--- with Access Token ------>|    Resource   |
     |        |                                  |     Server    |
     |        |<-(D)----- HTTP Response ---------|               |
     +--------+                                  +---------------+

                   Figure 2: Refreshing an Access Token

   This specification defines a number of authorization flows to support
   different client types and scenarios.  These authorization flows can
   be separated into three groups: user delegation flows, direct
   credentials flows, and autonomous flows.

   Additional authorization flows may be defined by other specifications
   to cover different scenarios and client types.

   User delegation flows are used to grant client access to protected
   resources by the end-user without sharing the end-user credentials
   (e.g. a username and password) with the client.  Instead, the end-
   user authenticates directly with the authorization server, and grants
   client access to its protected resources.  The user delegation flows
   defined by this specifications are:

   o  Web Server Flow - This flow is optimized for clients that are part
      of a web server application, accessible via HTTP requests.  This
      flow is described in Section 2.5. 2.1.

   o  User-Agent Flow - This flow is designed for clients running inside
      a user-agent (typically a web browser).  This flow is described in
      Section 2.6.

   o  Device Flow - This flow is suitable for clients executing on
      limited devices, but where the end-user has separate access to a
      user-agent on another computer or device.  This flow is described
      in Section 2.7.

   Direct credentials flows enable 2.2.

   Direct credentials flows enable clients to obtain an access token
   with a single request using the client credentials or end-user
   credentials without seeking additional resource owner authorization.
   The direct credentials flows defined by this specification are:

   o  Username and Password Flow - This flow is used in cases where the
      end-user trusts the client to handle its credentials but it is
      still undesirable for the client to store the end-user's username
      and password.  This flow is only suitable when there is a high
      degree of trust between the end-user and the client.  This flow is
      described in Section 2.8. 2.3.

   o  Client Credentials Flow - The client uses its credentials to
      obtain an access token.  This flow is described in Section 2.9. 2.4.

   Autonomous flows enable clients to use utilize existing trust
   relationships or different authorization constructs to obtain an
   access token.  They provide a bridge between OAuth and other trust
   frameworks.  The autonomous authorization flow defined by this
   specifications is:

   o  Assertion Flow - The client presents an assertion such as a SAML
      [OASIS.saml-core-2.0-os] assertion to the authorization server in
      exchange for an access token.  This flow is described in
      Section 2.10. 2.5.

   The sizes of tokens and other values received from the authorization
   server, are left undefined by this specification.  Clients should
   avoid making assumptions about value sizes.  Servers should document
   the expected size of any value they issue.

1.3.  Example

   [[ Todo ]]

1.4.  Notational Conventions

   The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL', 'SHALL NOT',
   'SHOULD', 'SHOULD NOT', 'RECOMMENDED', 'MAY', and 'OPTIONAL' in this
   document are to be interpreted as described in [RFC2119].

   This document uses the Augmented Backus-Naur Form (ABNF) notation of
   [I-D.ietf-httpbis-p1-messaging].  Additionally, the realm and auth-
   param rules are included from [RFC2617], and the URI-Reference rule
   from [RFC3986].

2.  Obtaining an Access Token

   The client obtains an access token by using one of the authorization
   flows supported by the authorization server.  The authorization flows [RFC2617].

   Unless otherwise noted, all use the same authorization protocol parameter names and token endpoints, each with values
   are case sensitive.

2.  Client Flows

2.1.  Web Server Flow

   The web server flow is a
   different set user delegation flow suitable for clients
   capable of request parameters and values.

   Access tokens have a scope, duration, and other access attributes
   granted by the resource owner.  These attributes MUST be enforced by interacting with the resource server when receiving end-user's user-agent (typically a protected resource request,
   web browser) and
   by the authorization server when receiving a token refresh request.

   In many cases it is desirable to issue access tokens with a shorter
   lifetime than the duration capable of the authorization grant.  However, it
   may be undesirable to require the resource owner to authorize the
   request again.  Instead, receiving incoming requests from the
   authorization server issues a refresh
   token in addition to the access token.  When the access token
   expires, the client can request a new access token without involving
   the resource owner as long (capable of acting as the authorization grant is still valid.
   The token refresh method is described in Section 3.

2.1. an HTTP server).

     +----------+         Client Credentials

   When requesting access from the authorization server, Identifier       +---------------+
     |         -+----(A)-- & Redirect URI ------->|               |
     | End-user |                                 | Authorization |
     |    at    |<---(B)-- User authenticates --->|     Server    |
     | Browser  |                                 |               |
     |         -+----(C)-- Verification Code ----<|               |
     +-|----|---+                                 +---------------+
       |    |                                         ^      v
      (A)  (C)                                        |      |
       |    |                                         |      |
       ^    v                                         |      |
     +---------+                                      |      |
     |         |>---(D)-- Client Credentials, --------'      |
     |   Web   |           Verification Code,                |
     |  Client |            & Redirect URI                   |
     |         |                                             |
     |         |<---(E)------- Access Token -----------------'
     +---------+        (w/ Optional Refresh Token)

                         Figure 3: Web Server Flow

   The web server flow illustrated in Figure 3 includes the following
   steps:

   (A)  The web client
   identifies itself initiates the flow by redirecting the end-user's
        user-agent to the end-user authorization endpoint as described
        in Section 4.1.1 using a set of client credentials. type "web_server".  The client
   credentials include a
        includes its client identifier identifier, requested scope, local state,
        and an OPTIONAL symmetric
   shared secret.  The means through a redirect URI to which the client obtains these
   credentials are beyond the scope of this specification, but usually
   involve registration with authorization server will send
        the end-user back once authorization server.

   The client identifier is used by the granted (or denied).

   (B)  The authorization server to
   establish authenticates the identity of end-user (via the client for
        user-agent) and establishes whether the purpose of presenting
   information end-user grants or
        denies the client's access request.

   (C)  Assuming the end-user granted access, the authorization server
        redirects the user-agent back to the resource owner prior to granting access, as well
   as for providing different service levels to different clients.  They
   can also be used to block unauthorized clients from requesting
   access.

   Due client to the nature of some clients, redirection
        URI provided earlier.  The authorization servers SHOULD NOT
   make assumptions about the confidentiality of client credentials
   without establishing trust with includes a verification
        code for the client operator.  Authorization
   servers SHOULD NOT issue client secrets to clients incapable of
   keeping their secrets confidential.

2.2.  End-User Endpoint

   In flows that involved an end-user, clients direct the end-user to
   the end-user endpoint use to approve their obtain an access request.  When
   accessing the end-user endpoint, the end-user first authenticates
   with token.

   (D)  The client requests an access token from the authorization server,
        server by authenticating and then approves or denies including the access
   request.

   The way verification code
        received in which the previous step as described in Section 5.1.

   (E)  The authorization server authenticates validates the end-user
   (e.g. username and password login, OpenID, session cookies) client credentials and in
   which
        the authorization server obtains verification code and responds back with the end-user's authorization,
   including whether it uses access token.

2.2.  User-Agent Flow

   The user-agent flow is a secure channel user delegation flow suitable for client
   applications residing in a user-agent, typically implemented in a
   browser using a scripting language such as TLS, is beyond JavaScript.  These clients
   cannot keep client secrets confidential and the
   scope authentication of this specification.  However, the
   client is based on the user-agent's same-origin policy.

   Unlike other flows in which the client makes separate authorization server MUST
   first verify
   and access token requests, the identity of client received the end-user.

   The URI access token as a
   result of the end-user endpoint can be found authorization request in the service
   documentation, or can be obtained by using [[ OAuth Discovery ]]. form of an HTTP
   redirection.  The end-user endpoint advertised by the resource server MAY include a
   query component as defined by [RFC3986] section 3, which must be
   retained when adding additional query parameters.

   Since client requests to the end-user endpoint result in user authentication
   and the transmission of sensitive values, the authorization server
   SHOULD require the use of a transport-layer mechanism such as TLS
   when sending requests to
   redirect the end-user endpoint.

2.3.  Token Endpoint

   After obtaining authorization from the user-agent to another web server or local resource owner, clients
   request an access token from
   accessible to the authorization server's token
   endpoint.

   The URI browser which is capable of extracting the access
   token endpoint can be found in the service
   documentation, or can be obtained by using [[ OAuth Discovery ]].

   The token endpoint advertised by from the resource server MAY include a
   query component as defined by [RFC3986] section 3.

   Since requests response and passing it to the token endpoint result in the transmission of
   plain text credentials in client.

   This user-agent flow does not utilize the HTTP request and response, client secret since the
   authorization server MUST require
   client executables reside on the use of a transport-layer
   mechanism when sending requests to end-user's computer or device which
   makes the token endpoints.  Servers MUST
   support TLS 1.2 as defined in [RFC5246] client secret accessible and MAY support addition
   mechanisms with equivalent protections.

2.3.1.  Client Authentication

   The exploitable.  Because the
   access token endpoint requires is encoded into the client to authenticate itself redirection URI, it may be exposed
   to the
   authorization server.  This is done by including the client
   identifier (and optional secret) in the request.  The client
   identifier and secret are included in the request using two request
   parameters: "client_id" and "client_secret".

   For example (line breaks are for display purposes only):

     POST /token HTTP/1.1
     Host: server.example.com
     Content-Type: application/x-www-form-urlencoded

     type=web_server&client_id=s6BhdRkqt3&
     client_secret=gX1fBat3bV&code=i1WsRn1uB1&
     redirect_uri=https%3A%2F%2Fclient%2Eexample%2Ecom%2Fcb

   The client MAY include the client credentials using an HTTP
   authentication scheme which supports authenticating using a username
   and password, instead of using the "client_id" and "client_secret"
   request parameters.  Including the client credentials using an HTTP
   authentication scheme fulfills the requirements of including the
   parameters as defined by the various flows.

   The client MUST NOT include the client credentials using more than
   one mechanism.  If more than one mechanism is used, regardless if the
   credentials are identical, the server MUST reply with an HTTP 400
   status code (Bad Request) and include the "multiple-credentials"
   error message.

   The authorization server MUST accept the client credentials using
   both the request parameters, and the HTTP Basic authentication scheme
   as defined in [RFC2617].  The authorization server MAY support
   additional HTTP authentication schemes.

   For example (line breaks are for display purposes only):

     POST /token HTTP/1.1
     Host: server.example.com
     Authorization: Basic czZCaGRSa3F0MzpnWDFmQmF0M2JW
     Content-Type: application/x-www-form-urlencoded

     type=web_server&code=i1WsRn1uB1&
     redirect_uri=https%3A%2F%2Fclient%2Eexample%2Ecom%2Fcb

2.3.2.  Response Format

   Authorization servers respond to client requests by including a set
   of response parameters in the entity body of the HTTP response.  The
   response uses one of three formats based on the format requested by
   the client (using the "format" request parameter or the HTTP "Accept"
   header field):

   o  The "application/json" media type as defined by [RFC4627].  The
      parameters are serialized into a JSON structure by adding each
      parameter at the highest structure level.  Parameter names and
      string values are included as JSON strings.  Numerical values are
      included as JSON numbers.

      For example:

     {
       "access_token":"SlAV32hkKG",
       "expires_in":3600,
       "refresh_token":"8xLOxBtZp8"
     }

   o  The "application/xml" media type as defined by [RFC3023].  The
      parameters are serialized into an XML structure by adding each
      parameter as a child element of the root "<OAuth>" element. [[ Add
      namespace ]]

      For example:

     <?xml version='1.0' encoding="utf-8"?>
     <OAuth>
       <access_token>SlAV32hkKG</access_token>
       <expires_in>3600</expires_in>
       <refresh_token>8xLOxBtZp8</refresh_token>
     </OAuth>

   o  The "application/x-www-form-urlencoded" media type as defined by
      [W3C.REC-html401-19991224].

      For example (line breaks are for display purposes only):

     access_token=SlAV32hkKG&expires_in=3600&
     refresh_token=8xLOxBtZp8

   The authorization server MUST include the HTTP "Cache-Control"
   response header field with a value of "no-store" in any response
   containing tokens, secrets, or other sensitive information.

2.3.2.1.  Access Token Response

   After receiving and verifying a valid and authorized access token
   request from the client (as described in each of the flows below),
   the authorization server constructs the response using the format
   requested by the client, which includes the parameters listed below,
   as well as additional flow-specific parameters.  The formatted
   parameters are sent to the client in the entity body of the HTTP
   response with a 200 status code (OK).

   The token response contains the following common parameters:

   access_token
         REQUIRED.  The access token issued by the authorization server.

   expires_in
         OPTIONAL.  The duration in seconds of the access token
         lifetime.

   refresh_token
         OPTIONAL.  The refresh token used to obtain new access tokens
         using the same end-user access grant as described in Section 3.

   scope
         OPTIONAL.  The scope of the access token as a list of space-
         delimited strings.  The value of the "scope" parameter is
         defined by the authorization server.  If the value contains
         multiple space-delimited strings, their order does not matter,
         and each string adds an additional access range to the
         requested scope.

   For example:

     HTTP/1.1 200 OK
     Content-Type: application/json
     Cache-Control: no-store

     {
       "access_token":"SlAV32hkKG",
       "expires_in":3600,
       "refresh_token":"8xLOxBtZp8"
     }

2.3.2.2.  Error Response

   If the token request is invalid or unauthorized, the authorization
   server constructs the response using the format requested by the
   client which includes the parameters listed below, as well as
   additional flow-specific parameters.  The formatted parameters are
   sent to the client in the entity body of the HTTP response with a 400
   status code (Bad Request).

   The response contains the following common parameter:

   error
         REQUIRED.  The parameter value MUST be set to one of the values
         specified by each flow.

   For example:

     HTTP/1.1 400 Bad Request
     Content-Type: application/json
     Cache-Control: no-store

     {
       "error":"incorrect_client_credentials"
     }

2.4.  Flow Parameters

   The sizes of tokens and other values received from the authorization
   server, are left undefined by this specification.  Clients should
   avoid making assumptions about value sizes.  Servers should document
   the expected size of any value they issue.

   Unless otherwise noted, all the protocol parameter names and values
   are case sensitive.

2.5.  Web Server Flow

   The web server flow is a user delegation flow suitable for clients
   capable of interacting with the end-user's user-agent (typically a
   web browser) and capable of receiving incoming requests from the
   authorization server (capable of acting as an HTTP server).

     +----------+         Client Identifier       +---------------+
     |         -+----(A)-- & Redirect URI ------->|               |
     | End-user |                                 | Authorization |
     |    at    |<---(B)-- User authenticates --->|     Server    |
     | Browser  |                                 |               |
     |         -+----(C)-- Verification Code ----<|               |
     +-|----|---+                                 +---------------+
       |    |                                         ^      v
      (A)  (C)                                        |      |
       |    |                                         |      |
       ^    v                                         |      |
     +---------+                                      |      |
     |         |>---(D)-- Client Credentials, --------'      |
     |   Web   |           Verification Code,                |
     |  Client |            & Redirect URI                   |
     |         |                                             |
     |         |<---(E)------- Access Token -----------------'
     +---------+        (w/ Optional Refresh Token)

                         Figure 3: Web Server Flow

   The web server flow illustrated in Figure 3 includes the following
   steps:

   (A)  The web client initiates the flow by redirecting the end-user's
        user-agent to the end-user endpoint with its client identifier
        and a redirect URI to which the authorization server will send
        the end-user back once authorization is received (or denied).

   (B)  The authorization server authenticates the end-user (via the
        user-agent) and establishes whether the end-user grants or
        denies the client's access request.

   (C)  Assuming the end-user granted access, the authorization server
        redirects the user-agent back to the client to the redirection
        URI provided earlier.  The authorization includes a verification
        code for the client to use to obtain an access token.

   (D)  The client requests an access token from the authorization
        server by including its client credentials (identifier and
        secret), as well as the verification code received in the
        previous step.

   (E)  The authorization server validates the client credentials and
        the verification code and responds back with the access token.

2.5.1.  Client Requests Authorization

   In order for the end-user to grant the client access, the client
   sends the end-user to the authorization server.  The client
   constructs the request URI by adding the following URI query
   parameters to the end-user endpoint URI:

   type
         REQUIRED.  The parameter value MUST be set to "web_server".

   client_id
         REQUIRED.  The client identifier as described in Section 2.1.

   redirect_uri
         REQUIRED unless a redirection URI has been established between
         the client and authorization server via other means.  An
         absolute URI to which the authorization server will redirect
         the user-agent to when the end-user authorization step is
         completed.  The authorization server MAY require the client to
         pre-register their redirection URI.  Authorization servers MAY
         restrict the redirection URI to not include a query component
         as defined by [RFC3986] section 3.

   state
         OPTIONAL.  An opaque value used by the client to maintain state
         between the request and callback.  The authorization server
         includes this value when redirecting the user-agent back to the
         client.

   scope
         OPTIONAL.  The scope of the access request expressed as a list
         of space-delimited strings.  The value of the "scope" parameter
         is defined by the authorization server.  If the value contains
         multiple space-delimited strings, their order does not matter,
         and each string adds an additional access range to the
         requested scope.

   immediate
         OPTIONAL.  The parameter value must be set to "true" or
         "false".  If set to "true", the authorization server MUST NOT
         prompt the end-user to authenticate or approve access.
         Instead, the authorization server attempts to establish the
         end-user's identity via other means (e.g. browser cookies) and
         checks if the end-user has previously approved an identical
         access request by the same client and if that access grant is
         still active.  If the authorization server does not support an
         immediate check or if it is unable to establish the end-user's
         identity or approval status, it MUST deny the request without
         prompting the end-user.  Defaults to "false" if omitted.

   The client directs the end-user to the constructed URI using an HTTP
   redirection response, or by other means available to it via the end-
   user's user-agent.  The request MUST use the HTTP "GET" method.

   For example, the client directs the end-user's user-agent to make the
   following HTTPS requests (line breaks are for display purposes only):

     GET /authorize?type=web_server&client_id=s6BhdRkqt3&redirect_uri=
         https%3A%2F%2Fclient%2Eexample%2Ecom%2Fcb HTTP/1.1
     Host: server.example.com

   If the client has previously registered a redirection URI with the
   authorization server, the authorization server MUST verify that the
   redirection URI received matches the registered URI associated with
   the client identifier.

   The authorization server authenticates the end-user and obtains an
   authorization decision (by asking the end-user or establishing
   approval via other means).  The authorization server sends the end-
   user's user-agent to the provided client redirection URI using an
   HTTP redirection response, or by other means available to it via the
   end-user's user-agent.

2.5.1.1.  End-user Grants Authorization

   If the end-user authorizes the access request, the authorization
   server generates a verification code and associates it with the
   client identifier and redirection URI.  The authorization server
   constructs the request URI by adding the following parameters to the
   query component of redirection URI provided by the client:

   code
         REQUIRED.  The verification code generated by the authorization
         server.

   state
         REQUIRED if the "state" parameter was present in the client
         authorization request.  Set to the exact value received from
         the client.

   The verification code should expire shortly after it is issued and
   allowed for a single use.

   For example, the authorization server redirects the end-user's user-
   agent by sending the following HTTP response:

     HTTP/1.1 302 Found
     Location: https://client.example.com/cb?code=i1WsRn1uB1

   In turn, the end-user's user-agent makes the following HTTPS "GET"
   request:

     GET /cb?code=i1WsRn1uB1 HTTP/1.1
     Host: client.example.com

2.5.1.2.  End-user Denies Authorization

   If the end-user denied the access request, the authorization server
   constructs the request URI by adding the following parameters to the
   query component of the redirection URI provided by the client:

   error
         REQUIRED.  The parameter value MUST be set to "user_denied".

   state
         REQUIRED if the "state" parameter was present in the client
         authorization request.  Set to the exact value received from
         the client.

   For example, the authorization server directs the client to make the
   following HTTP request:

     GET /cb?error=user_denied HTTP/1.1
     Host: client.example.com

   The authorization flow concludes unsuccessfully.

2.5.2.  Client Requests Access Token

   The client obtains an access token from the authorization server by
   making an HTTP "POST" request to the token endpoint.  The client
   constructs a request URI by adding the following parameters to the
   request:

   type
         REQUIRED.  The parameter value MUST be set to "web_server".

   client_id
         REQUIRED.  The client identifier as described in Section 2.1.

   client_secret
         REQUIRED if the client identifier has a matching secret.  The
         client secret as described in Section 2.1.

   code
         REQUIRED.  The verification code received from the
         authorization server.

   redirect_uri
         REQUIRED.  The redirection URI used in the initial request.

   format
         OPTIONAL.  The response format requested by the client.  Value
         MUST be one of "json", "xml", or "form".  Alternatively, the
         client MAY use the HTTP "Accept" header field with the desired
         media type.  Defaults to "json" if omitted and no "Accept"
         header field is present.

   For example, the client makes the following HTTPS request (line
   breaks are for display purposes only):

     POST /token HTTP/1.1
     Host: server.example.com
     Content-Type: application/x-www-form-urlencoded

     type=web_server&client_id=s6BhdRkqt3&
     client_secret=gX1fBat3bV&code=i1WsRn1uB1&
     redirect_uri=https%3A%2F%2Fclient%2Eexample%2Ecom%2Fcb

   The authorization server MUST verify that the verification code,
   client identity, client secret, and redirection URI are all valid and
   match its stored association.  If the request is valid, the
   authorization server issues a successful response as described in
   Section 2.3.2.1.

   For example:

     HTTP/1.1 200 OK
     Content-Type: application/json
     Cache-Control: no-store

     {
       "access_token":"SlAV32hkKG",
       "expires_in":3600,
       "refresh_token":"8xLOxBtZp8"
     }

   If the request is invalid, the authorization server returns an error
   response as described in Section 2.3.2.2 with one of the following
   error codes:

   o  "redirect_uri_mismatch"

   o  "bad_verification_code"

   o  "incorrect_client_credentials"

   For example:

     HTTP/1.1 400 Bad Request
     Content-Type: application/json
     Cache-Control: no-store

     {
       "error":"incorrect_client_credentials"
     }

2.6.  User-Agent Flow

   The user-agent flow is a user delegation flow suitable for client
   applications residing in a user-agent, typically implemented in a
   browser using a scripting language such as JavaScript.  These clients
   cannot keep client secrets confidential and the authentication of the
   client is based on the user-agent's same-origin policy.

   Unlike other flows in which the client makes separate authorization
   and access token requests, the client received the access token as a
   result of the authorization request in the form of an HTTP
   redirection.  The client requests the authorization server to
   redirect the user-agent to another web server or local resource
   accessible to the browser which is capable of extracting the access
   token from the response and passing it to the client.

   This user-agent flow does not utilize the client secret since the
   client executables reside on the end-user's computer or device which
   makes the client secret accessible and exploitable.  Because the
   access token is encoded into the redirection URI, it may be exposed
   to the end-user and other applications residing on end-user and other applications residing on the computer or
   device.

          +----------+          Client Identifier     +----------------+
          |          |>---(A)-- & Redirection URI --->|                |
          |          |                                |                |
   End <--+  -  -  - +----(B)-- User authenticates -->|  Authorization |
   User   |          |                                |     Server     |
          |          |<---(C)-- Redirect URI --------<|                |
          |  Client  |       with Access Token        |                |
          |    in    |   (w/ Optional Refresh Token)  +----------------+
          |  Browser |            in Fragment
          |          |                                +----------------+
          |          |>---(D)-- Redirect URI -------->|                |
          |          |        without Fragment        |   Web Server   |
          |          |                                |   with Client  |
          |    (F)   |<---(E)-- Web Page with -------<|    Resource    |
          |  Access  |             Script             |                |
          |   Token  |                                +----------------+
          +----------+
                         Figure 4: User-Agent Flow

   The user-agent flow illustrated in Figure 4 includes the following
   steps:

   (A)  The client sends the user-agent to the authorization server and
        includes its client identifier and redirection URI in the
        request.

   (B)  The authorization server authenticates the end-user (via the
        user-agent) and establishes whether the end-user grants or
        denies the client's access request.

   (C)  Assuming the end-user granted access, the authorization server
        redirects the user-agent to the redirection URI provided
        earlier.  The redirection URI includes the access token in the
        URI fragment.

   (D)  The user-agent follows the redirection instructions by making a
        request to the web server which does not include the fragment.
        The user-agent retains the fragment information locally.

   (E)  The web server returns a web page containing a script capable of
        extracting the access token from the URI fragment retained by
        the user-agent.

   (F)  The user-agent executes the script provided by the web server
        which extracts the access token and passes it to the client.

2.6.1.  Client Requests Authorization

   In order for the end-user to grant the client access, the client
   sends the end-user to the authorization server.  The client
   constructs the request URI by adding the following URI query
   parameters to the end-user endpoint URI:

   type
         REQUIRED.  The parameter value MUST be set to "user_agent".

   client_id
         REQUIRED.  The client identifier as described in Section 2.1.

   redirect_uri
         REQUIRED unless a redirection URI has been established between
         the client and authorization server via other means.  An
         absolute URI to which the authorization server will redirect
         the following
   steps:

   (A)  The client sends the user-agent to when the end-user authorization step is
         completed.
        endpoint as described in Section 4.1.1 using client type
        "user-agent".  The authorization server SHOULD require the client
         to pre-register their redirection URI.  Authorization servers
         MAY restrict the redirection URI to not include a query
         component as defined by [RFC3986] section 3.

   state
         OPTIONAL.  An opaque value used by the includes its client identifier,
        requested scope, local state, and a redirect URI to maintain state
         between which the request and callback.  The
        authorization server
         includes this value when redirecting will send the user-agent end-user back to the
         client.

   scope
         OPTIONAL.  The scope of the access request expressed as a list
         of space-delimited strings.  The value of the "scope" parameter
         is defined by the once
        authorization server.  If the value contains
         multiple space-delimited strings, their order does not matter,
         and each string adds an additional access range to the
         requested scope.

   immediate
         OPTIONAL. is granted (or denied).

   (B)  The parameter value must be set to "true" or
         "false".  If set to "true", the authorization server MUST NOT
         prompt authenticates the end-user to authenticate or approve access.
         Instead, the authorization server attempts to establish (via the
         end-user's identity via other means (e.g. browser cookies)
        user-agent) and
         checks if establishes whether the end-user has previously approved an identical
         access request by grants or
        denies the same client and if that client's access grant is
         still active.  If request.

   (C)  Assuming the end-user granted access, the authorization server does not support an
         immediate check or if it is unable to establish the end-user's
         identity or approval status, it MUST deny the request without
         prompting the end-user.  Defaults to "false" if omitted.

   The client directs
        redirects the end-user user-agent to the constructed redirection URI using an HTTP provided
        earlier.  The redirection response, or by other means available to it via URI includes the access token (and an
        optional verification code) in the end-
   user's user-agent. URI fragment.

   (D)  The request MUST use user-agent follows the redirection instructions by making an
        HTTP "GET" method.

   For example, request to the client directs web server which does not include the end-user's
        fragment.  The user-agent to make retains the
   following HTTPS request (line breaks are for display purposes only):

     GET /authorize?type=user_agent&client_id=s6BhdRkqt3&
         redirect_uri=https%3A%2F%2FEexample%2Ecom%2Frd HTTP/1.1
     Host: server.example.com

   If fragment information
        locally.  The user-agent MUST NOT include the client has previously registered a redirection URI fragment component
        with the
   authorization server, the authorization request.

   (E)  The web server MUST verify that returns a web page (typically an HTML page with
        an embedded script) capable of accessing the full redirection
        URI received matches the registered URI associated with including the client identifier.

   The authorization server authenticates fragment retained by the end-user user-agent, and obtains an
   authorization decision (by asking
        extracting the end-user or establishing
   approval via access token (and other means). parameters) contained in
        the fragment.

   (F)  The authorization user-agent executes the script provided by the web server sends
        which extracts the end-
   user's user-agent access token and passes it to the provided client.  If
        a verification code was issued, the client redirection URI can pass it to a web
        server component to obtain another access token for additional
        server-based protected resources interaction.

2.3.  Username and Password Flow

   The username and password flow is suitable for clients capable of
   asking end-users for their usernames and passwords.  It is also used
   to migrate existing clients using an direct authentication schemes such
   as HTTP redirection response.

2.6.1.1.  End-user Grants Authorization

   If Basic or Digest authentication to OAuth by converting the
   end-user authorizes the access request, credentials stored with tokens.

   However, unlike the authorization
   server issues HTTP Basic authentication scheme defined in

   [RFC2617], the end-user's credentials are used in a single request
   and are exchanged for an access token and delivers it to refresh token which
   eliminates the client by adding
   the following parameters, using the
   "application/x-www-form-urlencoded" format as defined by
   [W3C.REC-html401-19991224], need to the redirection URI fragment:

   access_token
         REQUIRED.  The access token.

   expires_in
         OPTIONAL. store them for future use.

   The duration in seconds methods through which the client prompts end users for their
   usernames and passwords is beyond the scope of this specification.
   The client MUST discard the usernames and passwords once an access
   token
         lifetime.

   refresh_token
         OPTIONAL.  The refresh token.

   state
         REQUIRED if the "state" parameter was present has been obtained.

   This flow is suitable in cases where the client
         authorization request.  Set to the exact value received from
         the client.

   For example, the authorization server redirects end-user already has a trust
   relationship with the end-user's user-
   agent by sending client, such as its computer operating system
   or highly privileged applications.  Authorization servers should take
   special care when enabling the following HTTP response:

    HTTP/1.1 302 Found
    Location: http://example.com/rd#access_token=FJQbwq9&expires_in=3600

2.6.1.2. username and password flow, and only
   when other delegation flows are not viable.

      End-user Denies
         v
         :
        (A)
         :
         v
     +--------+                                  +---------------+
     |        |          Client Credentials      |               |
     |        |>--(B)--- & User Credentials ---->| Authorization

   If the end-user denied the access request, the authorization server
   responds to the client by adding the following parameters, using the
   "application/x-www-form-urlencoded" format as defined by
   [W3C.REC-html401-19991224], to |
     | Client |                                  |     Server    |
     |        |<--(C)---- Access Token ---------<|               |
     |        |     (w/ Optional Refresh Token)  |               |
     +--------+                                  +---------------+

                   Figure 5: Username and Password Flow

   The username and password flow illustrated in Figure 5 includes the redirection URI fragment:

   error
         REQUIRED.
   following steps:

   (A)  The parameter value MUST be set to "user_denied".

   state
         REQUIRED if the "state" parameter was present in end-user provides the client
         authorization request.  Set to the exact value received with its username and password.

   (B)  The client requests an access token from the client.

   For example, the authorization
        server responds with the following:

     HTTP/1.1 302 Found
     Location: http://example.com/rd#error=user_denied

   The authorization flow concludes unsuccessfully.  To extract the
   error message, the client follows by authenticating and including the steps end-user's username
        and password, and desired scope as described in Section 2.6.2.

2.6.2.  Client Extracts Access Token 5.1.

   (C)  The user-agent follows the authorization server redirection response
   by making an HTTP "GET" request to validates the URI received in end-user credentials and
        the "Location"
   HTTP response header. client credentials and issues an access token.

2.4.  Client Credentials Flow

   The user-agent SHALL NOT include the fragment
   component with client credentials flow is used when the request.

   For example, client acts on behalf of
   itself (the client is the user-agent makes resource owner), or when the following HTTP "GET" request in
   response client
   credentials are used to the redirection directive received from the authorization
   server:

     GET /rd HTTP/1.1
     Host: example.com obtain an access token representing a
   previously established access authorization.  The HTTP response client secret is
   assumed to the redirection request returns a web page
   (typically an HTML page with be high-entropy since it is not designed to be memorized
   by an embedded script) capable of accessing end-user.

     +--------+                                  +---------------+
     |        |                                  |               |
     |        |>--(A)--- Client Credentials ---->| Authorization |
     | Client |                                  |     Server    |
     |        |<--(B)---- Access Token ---------<|               |
     |        |     (w/ Optional Refresh Token)  |               |
     +--------+                                  +---------------+

                     Figure 6: Client Credentials Flow

   The client credential flow illustrated in Figure 6 includes the full redirection URI including
   following steps:

   (A)  The client requests an access token from the fragment retained authorization
        server by the user-
   agent, authenticating and extracting including the access token (and other parameters)
   contained desired scope as
        described in Section 5.1.  No additional authorization grant
        information is needed.

   (B)  The authorization server validates the fragment.

2.7.  Device client credentials and
        issues an access token.

2.5.  Assertion Flow

   The device assertion flow is used when a user delegation flow suitable for clients
   executing on devices which do not have client wishes to exchange an easy data-entry method
   (e.g. game consoles
   existing security token or media hub), but where the end-user has
   separate assertion for an access to a user-agent on another computer or device (e.g.
   home computer, a laptop, or a smart phone).  The token.  This flow
   is suitable when the client is incapable
   of receiving incoming requests from the authorization server
   (incapable of resource owner or is acting as an HTTP server).

   Instead on
   behalf of interacting with the end-user's user-agent, resource owner (based on the client
   instructs content of the end-user assertion
   used).

   The assertion flow requires the client to use another computer obtain a assertion (such as
   a SAML [OASIS.saml-core-2.0-os] assertion) from an assertion issuer
   or device and connect to the authorization server self-issue an assertion prior to approve the access request.  Since the
   client cannot receive incoming requests, it polls the authorization
   server repeatedly until the end-user completes the approval process.

   This device flow does not utilize the client secret since initiating the client
   executables reside on a local device which makes flow.  The
   assertion format, the client secret
   accessible and exploitable.

     +----------+                                +----------------+
     |          |>---(A)-- Client Identifier --->|                |
     |          |                                |                |
     |          |<---(B)-- Verification Code, --<|                |
     |          |              User Code,        |                |
     |          |         & Verification URI     | process by which the assertion is obtained, and
   the method of validating the assertion are defined by the assertion
   issuer and the authorization server, and are beyond the scope of this
   specification.

     +--------+                                  +---------------+
     |        |  Device                                  |               |
     |        |>--(A)------ Assertion ---------->| Authorization |  Client
     | Client Identifier &    |                |
     |          |>---(E)-- Verification Code --->|                |
     |          |    ... |                                  |
     |          |>---(E)--->                     |                |
     |          |                                |  Authorization     Server    |
     |          |<---(F)--        |<--(B)---- Access Token --------<|     Server     |
     +----------+  (w/ Optional Refresh Token)   |                |
           v                                     |                |
           :                                     |                |
          (C) User Code & Verification URI       |                |
           :                                     |                |
           v                                     |                |
     +----------+                                |                |
     | End-user |                                |                |
     |    at    |<---(D)-- User authenticates -->| ---------<|               |
     |  Browser        |                                  |               |
     +----------+                                +----------------+
     +--------+                                  +---------------+

                         Figure 5: Device 7: Assertion Flow

   The device assertion flow illustrated in Figure 5 7 includes the following
   steps:

   (A)  The client requests an access token from the authorization
        server by authenticating and
        includes its client identifier including the assertion, assertion
        type, and desired scope as described in Section 5.1.

   (B)  The authorization server validates the assertion and issues an
        access token.

2.6.  Native Application Considerations

   Native application are clients running as native code on the end-
   user's computer or device (i.e. executing outside a browser or as a
   desktop program).  These clients are often capable of interacting
   with (or embedding) the end-user's user-agent but are incapable of
   receiving callback requests from the server (incapable of acting as
   an HTTP server).

   Native application clients can utilize many of the flows defined in
   this specification with little or no changes.  For example:

   o  Launch an external user-agent and have it redirect back to the
      client using a custom URI scheme.  This works with the web server
      flow and user-agent flow.

   o  Launch an external user-agent and poll for changes to the request.

   (B)  The authorization window
      title.  This works with the web server issues flow with a verification code, an end-user
        code, and provides server-hosted
      custom redirect result page that puts the end-user verification URI.

   (C)  The client instructs code in the end-user to use its
      title.

   o  Use an embedded user-agent
        (elsewhere) and visit obtain the provided end-user verification redirection URI.
        The client provides the end-user  This
      works with the end-user code to enter
        in order to grant access.

   (D)  The authorization web server authenticates the end-user (via flow and user-agent flow.

   o  Use the
        user-agent) username and prompts password flow and prompt the end-user end-users for
      their credentials.  This is generally discouraged as it hands the
      end-user's password directly to grant the client's
        access request.  If 3rd party and may not work
      with some authentication schemes.

   When choosing between launching an external browser and an embedded
   user-agent, developers should consider the following:

   o  External user-agents may improve completion rate as the end-user agrees
      may already be logged-in and not have to re-authenticate.

   o  Embedded user-agents often offer a better end-user flow, as they
      remove the client's need to switch context and open new windows.

   o  Embedded user-agents are less secure because users are
      authenticating in unidentified window without access
        request, the end-user enters to the end-user code provided
      protections offered by many user-agents.

3.  Client Credentials

   When requesting access from the
        client.  The authorization server validates the end-user code
        provided by server, the end-user.

   (E)  While client
   identifies itself using a set of client credentials.  The client
   credentials include a client identifier and an OPTIONAL symmetric
   shared secret.  The means through which the end-user authorizes (or denies) client obtains these
   credentials are beyond the client's request
        (D), scope of this specification, but usually
   involve registration with the authorization server.

   The client repeatedly polls identifier is used by the authorization server to
        find out if
   establish the end-user completed identity of the end-user authorization
        step.  The client includes for the verification code and its client
        identifier.

   (F)  Assuming purpose of presenting
   information to the end-user granted resource owner prior to granting access, as well
   as for providing different service levels to different clients.  They
   can also be used to block unauthorized clients from requesting
   access.

   Due to the nature of some clients, authorization server
        validates the verification code provided by servers SHOULD NOT
   make assumptions about the confidentiality of client and
        responds back credentials
   without establishing trust with the access token.

2.7.1.  Client Requests client operator.  Authorization

   The
   servers SHOULD NOT issue client initiates the flow by requesting a set secrets to clients incapable of verification
   codes from
   keeping their secrets confidential.

3.1.  Client Authentication

   The token endpoint requires the authorization server by making an HTTP "POST" request client to authenticate itself to the token endpoint.  The client constructs a request URI
   authorization server.  This is done by adding including the following parameters to client
   identifier (and optional secret) in the request:

   type
         REQUIRED.  The parameter value MUST be set to "device_code".

   client_id
         REQUIRED. request.  The client
   identifier as described and secret are included in Section 2.1.

   scope
         OPTIONAL.  The scope of the access request expressed as a list
         of space-delimited strings. using two request
   parameters: "client_id" and "client_secret".

   For example (line breaks are for display purposes only):

     POST /token HTTP/1.1
     Host: server.example.com
     Content-Type: application/x-www-form-urlencoded

     type=web_server&client_id=s6BhdRkqt3&
     client_secret=gX1fBat3bV&code=i1WsRn1uB1&
     redirect_uri=https%3A%2F%2Fclient%2Eexample%2Ecom%2Fcb

   The value of the "scope" parameter
         is defined by client MAY include the authorization server.  If client credentials using an HTTP
   authentication scheme which supports authenticating using a username
   and password, instead of using the value contains
         multiple space-delimited strings, their order does not matter, "client_id" and each string adds "client_secret"
   request parameters.  Including the client credentials using an additional access range to HTTP
   authentication scheme fulfills the
         requested scope.

   format
         OPTIONAL.  The response format requested requirements of including the
   parameters as defined by the client.  Value various flows.

   The client MUST be one of "json", "xml", or "form".  Alternatively, NOT include the client MAY use credentials using more than
   one mechanism.  If more than one mechanism is used, regardless if the HTTP "Accept" header field with
   credentials are identical, the desired
         media type.  Defaults to "json" if omitted server MUST reply with an HTTP 400
   status code (Bad Request) and no "Accept"
         header field is present.

   For example, include the "multiple-credentials"
   error message.

   The authorization server MUST accept the client makes credentials using
   both the following HTTPS request parameters, and the HTTP Basic authentication scheme
   as defined in [RFC2617].  The authorization server MAY support
   additional HTTP authentication schemes.

   For example (line breaks are for display purposes only):

     POST /token HTTP/1.1
     Host: server.example.com
     Authorization: Basic czZCaGRSa3F0MzpnWDFmQmF0M2JW
     Content-Type: application/x-www-form-urlencoded

     type=device_code&client_id=s6BhdRkqt3

   In response,

     type=web_server&code=i1WsRn1uB1&
     redirect_uri=https%3A%2F%2Fclient%2Eexample%2Ecom%2Fcb

4.  Establishing Resource Owner Authorization

   Before the authorization server generates a verification code
   and client can obtain an end-user code and includes them in the HTTP response body
   using access token, it must first attain
   authorization from the "application/json" format as described by Section 2.3.2
   with a 200 status code (OK). resource owner.  The response contains methods through which the following
   parameters:

   code
         REQUIRED.  The verification code.

   user_code
         REQUIRED.  The end-user code.

   verification_uri
         REQUIRED.  The end-user verification URI on
   client attains authorization are codified in the various
   authorization
         server.  The URI should be short flows defined in Section 5, and easy to remember as end-
         users will be asked to manually depends on the client
   type it into their user-agent.

   expires_in
         OPTIONAL.  The duration and its trust relationship with the resource owner.

   Resource owner authorization can be expressed in seconds of the multiple ways: a
   verification code
         lifetime.

   interval
         OPTIONAL.  The minimum amount of time in seconds that obtained through direct interaction with an end-
   user, the resource owner credentials (or the client SHOULD wait between polling requests to credentials when
   the token
         endpoint.

   For example:

     HTTP/1.1 200 OK
     Content-Type: application/json
     Cache-Control: no-store

     {
       "code":"74tq5miHKB",
       "user_code":"94248",
       "verification_uri":"http://www.example.com/device",
       "interval"=5
     }

   The client displays is also the resource owner) obtained through a trust
   relationship with the resource owner, or an assertion obtained
   through means beyond the scope of this specification.

4.1.  Verification Code

   When an end-user is involved, the client attains authorization in the
   form of a verification code and by sending the end-user verification
   URI to the end-user,
   authorization server to review and instructs grant the request.  The client
   sends the end-user to visit by directing the URI
   using a end-user's user-agent and enter to the
   authorization server's end-user code.

   The authorization endpoint.

4.1.1.  End-User Authorization Endpoint

   When directed to the end-user manually types authorization endpoint, the provided verification URI and end-user
   first authenticates with the authorization server. server, and then grants or
   denies the access request.  The way in which the authorization server prompts the end-user to authorize the client's request by
   entering
   authenticates the end-user code provided by (e.g. username and password login, OpenID,
   session cookies) and in which the client.  Once authorization server obtains the end-user
   approves or denies
   end-user's authorization, including whether it uses a secure channel
   such as TLS, is beyond the request, scope of this specification.  However, the
   authorization server informs MUST first verify the identity of the end-user.

   The location of the end-user to return to authorization endpoint can be found in
   the device for further instructions.

2.7.2.  Client Requests Access Token service documentation, or can be obtained by using [[ OAuth
   Discovery ]].  The end-user authorization endpoint URI MAY include a
   query component as defined by [RFC3986] section 3, which must be
   retained when adding additional query parameters.

   Since the client is unable to receive incoming requests from the
   authorization server, it polls the authorization server repeatedly
   until to the end-user grants or denies the request, or the verification
   code expires.

   The client makes the following request at an arbitrary but reasonable
   interval which MUST NOT exceed authorization endpoint result in user
   authentication and the minimum interval rate provided by transmission of sensitive information, the
   authorization server (if present via the "interval" parameter).
   Alternatively, SHOULD require the client MAY provide use of a user interface for the end-
   user to manually inform it transport-layer
   mechanism such as TLS when authorization was granted.

   The client sending requests an access token by making an HTTP "POST" request to the token end-user
   authorization endpoint.  The

   In order to direct the end-user's user-agent to the authorization
   server, the client constructs a the request URI by adding the following
   parameters to the request: end-user authorization endpoint URI query component
   using the "application/x-www-form-urlencoded" format as defined by
   [W3C.REC-html401-19991224]:

   type
         REQUIRED.  The client type (user-agent or web server).
         Determines how the authorization server delivers the
         authorization response back to the client.  The parameter value
         MUST be set to "device_token". "web_server" or "user_agent".

   client_id
         REQUIRED.  The client identifier as described in Section 2.1.

   code
         REQUIRED.  The verification code received from the
         authorization server.

   format
         OPTIONAL.  The response format requested by the client.  Value
         MUST be one of "json", "xml", or "form".  Alternatively, 3.

   redirect_uri
         REQUIRED, unless a redirection URI has been established between
         the client MAY use the HTTP "Accept" header field with the desired
         media type.  Defaults to "json" if omitted and no "Accept"
         header field is present.

   For example, the client makes the following HTTPS request (line
   breaks are for display purposes only):

     POST /token HTTP/1.1
     Host: server.example.com
     Content-Type: application/x-www-form-urlencoded

     type=device_token&client_id=s6BhdRkqt3
     &code=74tq5miHKB

   If the end-user authorized the request, the authorization server
   issues an access token response as described in Section 2.3.2.1.

   For example:

     HTTP/1.1 200 OK
     Content-Type: application/json
     Cache-Control: no-store

     {
       "access_token":"SlAV32hkKG",
       "expires_in":3600,
       "refresh_token":"8xLOxBtZp8"
     }

   If the request is invalid, via other means.  An
         absolute URI to which the authorization server returns an error
   response as described in Section 2.3.2.2 with one of will redirect
         the following
   error codes:

   o  "authorization_declined"

   o  "bad_verification_code"

   For example:

     HTTP/1.1 400 Bad Request
     Content-Type: application/json
     Cache-Control: no-store

     {
       "error":"authorization_declined"
     }

   If user-agent to when the end-user authorization step is pending or expired without receiving
   any response from the end-user, or
         completed.  The authorization server SHOULD require the client is exceeding
         to pre-register their redirection URI.  Authorization servers
         MAY restrict the
   allowed polling interval, redirection URI to not include a query
         component as defined by [RFC3986] section 3.

   state
         OPTIONAL.  An opaque value used by the client to maintain state
         between the request and callback.  The authorization server returns an error
   response as described in Section 2.3.2.2 with one
         includes this value when redirecting the user-agent back to the
         client.

   scope
         OPTIONAL.  The scope of the following
   error codes:

   o  "'authorization_pending"

   o  "slow_down"
   o  "code_expired"

   For example:

     HTTP/1.1 400 Bad Request
     Content-Type: application/json
     Cache-Control: no-store

     {
       "error":"authorization_pending"
     }

2.8.  Username and Password Flow access request expressed as a list
         of space-delimited strings.  The username and password flow is suitable for clients capable value of
   asking end-users for the "scope" parameter
         is defined by the authorization server.  If the value contains
         multiple space-delimited strings, their usernames order does not matter,
         and passwords.  It is also used each string adds an additional access range to migrate existing clients the
         requested scope.

   The client directs the end-user to the constructed URI using direct authentication schemes such
   as an HTTP Basic
   redirection response, or Digest authentication to OAuth by converting other means available to it via the
   end-user credentials stored with tokens.

   However, unlike end-
   user's user-agent.  The request MUST use the HTTP "GET" method.

   For example, the HTTP Basic authentication scheme defined in
   [RFC2617], client directs the end-user's credentials are used in a single user-agent to make the
   following HTTPS request
   and (line breaks are exchanged for an access token and refresh token which
   eliminates display purposes only):

     GET /authorize?type=web_server&client_id=s6BhdRkqt3&redirect_uri=
         https%3A%2F%2Fclient%2Eexample%2Ecom%2Fcb HTTP/1.1
     Host: server.example.com

   If the client need to store them for future use.

   The methods through which has previously registered a redirection URI with the client prompts end users for their
   usernames and passwords is beyond
   authorization server, the scope of this specification.
   The client authorization server MUST discard verify that the usernames
   redirection URI received matches the registered URI associated with
   the client identifier. [[ provide guidance on how to perform matching
   ]]

   The authorization server authenticates the end-user and passwords once obtains an access
   token has been obtained.

   This flow is suitable in cases where
   authorization decision (by asking the end-user already has or by establishing
   approval via other means).  When a trust
   relationship with decision has been established, the client, such as its computer operating system
   or highly privileged applications.  Authorization servers should take
   special care when enabling
   authorization server directs the username and password flow, and only
   when end-user's user-agent to the
   provided client redirection URI using an HTTP redirection response,
   or by other delegation flows are not viable.

      End-user
         v
         :
        (A)
         :
         v
     +--------+                                  +---------------+
     |        |          Client Credentials      |               |
     |        |>--(B)--- & User Credentials ---->| Authorization |
     | Client |                                  |     Server    |
     |        |<--(C)---- Access Token ---------<|               |
     |        |     (w/ Optional Refresh Token)  |               |
     +--------+                                  +---------------+

                   Figure 6: Username and Password Flow

   The username and password flow illustrated in Figure 6 includes means available to it via the end-user's user-agent.

4.1.1.1.  Authorization Server Response

   If the
   following steps:

   (A)  The end-user provides grants the client with its username and password.

   (B)  The client sends an access token request to request, the authorization server
   issues an access token, a verification code, or both, and includes its delivers
   them to the client identifier and by adding the following parameters to the
   redirection URI:

   code
         REQUIRED if the client secret, and type is "web_server", otherwise
         OPTIONAL.  The verification code generated by the end-user's username authorization
         server.  The verification code SHOULD expire shortly after it
         is issued and password.

   (C) allowed for a single use.  The authorization server validates verification code
         is bound to the end-user credentials client identifier and redirection URI.

   access_token
         REQUIRED if the client credentials and issues an type is "user_agent", otherwise MUST NOT
         be included.  The access token.

2.8.1.  Client Requests Access Token

   expires_in
         OPTIONAL.  The client requests an duration in seconds of the access token by making lifetime
         if an HTTP "POST" request access token is included.

   state
         REQUIRED if the "state" parameter was present in the client
         authorization request.  Set to the token endpoint.  The exact value received from
         the client.

   If the end-user denies the access request, the authorization server
   informs the client constructs a request URI by adding the following parameters to the request:

   type
   redirection URI:

   error
         REQUIRED.  The parameter value MUST be set to "username".

   client_id
         REQUIRED.  The client identifier as described in Section 2.1.

   client_secret
         REQUIRED.  The client secret as described in Section 2.1.
         OPTIONAL "user_denied".

   state
         REQUIRED if no client secret was issued.

   username
         REQUIRED.  The end-user's username.

   password
         REQUIRED.  The end-user's password.

   scope
         OPTIONAL.  The scope of the access request expressed as a list
         of space-delimited strings.  The value of the "scope" "state" parameter
         is defined by was present in the client
         authorization server.  If request.  Set to the exact value contains
         multiple space-delimited strings, their order does not matter,
         and each string received from
         the client.

   The method in which the authorization server adds an additional access range the parameter to
   the
         requested scope.

   format
         OPTIONAL.  The response format requested redirection URI is determined by the client.  Value
         MUST be one of "json", "xml", or "form".  Alternatively, client type provided by the
   client MAY use in the HTTP "Accept" header field with authorization request using the desired
         media type.  Defaults to "json" if omitted and no "Accept"
         header field is present.

   For example, "type" parameter.

   If the client makes type is "web_server", the following HTTPS request (line
   breaks are for display purposes only):

     POST /token HTTP/1.1
     Host: server.example.com
     Content-Type: application/x-www-form-urlencoded

     type=username&client_id=s6BhdRkqt3&client_secret=
     47HDu8s&username=johndoe&password=A3ddj3w

   The authorization server MUST validate adds the client credentials and
   end-user credentials and if valid issues an access token response
   parameters to the redirection URI query component using the
   "application/x-www-form-urlencoded" format as
   described in Section 2.3.2.1. defined by
   [W3C.REC-html401-19991224].

   For example: example, the authorization server redirects the end-user's user-
   agent by sending the following HTTP response:

     HTTP/1.1 200 OK
     Content-Type: application/json
     Cache-Control: no-store

     {
       "access_token":"SlAV32hkKG",
       "expires_in":3600,
       "refresh_token":"8xLOxBtZp8"

     } 302 Found
     Location: https://client.example.com/cb?code=i1WsRn1uB1

   If the request client type is invalid, "user_agent", the authorization server returns an error
   response adds the
   parameters to the redirection URI fragment component using the
   "application/x-www-form-urlencoded" format as described in Section 2.3.2.2 defined by
   [W3C.REC-html401-19991224]. [[ replace form-encoded with one of JSON? ]]

   For example, the authorization server redirects the end-user's user-
   agent by sending the following
   error codes:

   o  "incorrect_client_credentials"

   o  "unauthorized_client'" - The client is not permitted to use this
      flow.

   For example: HTTP response:

    HTTP/1.1 400 Bad Request
     Content-Type: application/json
     Cache-Control: no-store

     {
       "error":"incorrect_client_credentials"
     }

2.9.  Client 302 Found
    Location: http://example.com/rd#access_token=FJQbwq9&expires_in=3600

4.2.  Resource Owner Credentials Flow

   The client

   While OAuth seeks to eliminate the need for resource owners to share
   their credentials flow is with the client, possesion of the resource owner
   credentials constitute an authorization grant (if supported by the
   authorization server).  Resource owner credentials should only be
   used when the client acts on behalf there is a high degree of
   itself (the trust between the resource owner
   the client.

   In cases where the client is also the resource owner), or when owner, the client
   credentials are can be used to obtain an access token representing a
   previously established access authorization.  The client secret is
   assumed to be high-entropy since it is not designed to be memorized
   by an end-user.

     +--------+                                  +---------------+
     |        |                                  |               |
     |        |>--(A)--- Client Credentials ---->| Authorization |
     | Client |                                  |     Server    |
     |        |<--(B)---- Access Token ---------<|               |
     |        |     (w/ Optional Refresh Token)  |               |
     +--------+                                  +---------------+

                     Figure 7: Client Credentials Flow

   The client credential flow illustrated in Figure 7 includes provisioned for
   accessing the
   following steps:

   (A)  The client sends an access token request to client's protected resources.

4.3.  Assertion

   Assertions enable the authorization
        server and includes its client identifier and client secret.

   (B)  The to utilize existing trust relationships
   or different authorization server validates the client credentials and
        issues constructs to obtain an access token.

2.9.1.  Client Requests Access Token

   The client requests an access token by making an HTTP "POST" request
   to the token endpoint.  The client constructs
   They provide a request URI by adding
   the following parameters to the request:

   type
         REQUIRED.  The parameter value MUST be set to
         "client_credentials".

   client_id
         REQUIRED.  The client identifier as described in Section 2.1.

   client_secret
         REQUIRED.  The client secret as described in Section 2.1.

   scope
         OPTIONAL. bridge between OAuth and other trust frameworks.  The scope of
   authorization grant represented by an assertion depends on the access request expressed as a list
   assertion type, its content, and how it was issued, which are beyond
   the scope of space-delimited strings. this specification.

5.  Obtaining an Access Token

   The value of the "scope" parameter
         is defined client obtains an access token by authenticating with the
   authorization server.  If the value contains
         multiple space-delimited strings, their order does not matter, server and each string adds an additional access range presenting its authorization grant.

   In many cases it is desirable to issue access tokens with a shorter
   lifetime than the
         requested scope.

   format
         OPTIONAL.  The response format requested by the client.  Value
         MUST be one duration of "json", "xml", or "form".  Alternatively, the
         client MAY use the HTTP "Accept" header field with authorization grant.  However, it
   may be undesirable to require the desired
         media type.  Defaults resource owner to "json" if omitted and no "Accept"
         header field is present.

   For example, authorize the client makes
   request again.  Instead, the following HTTPS request:

     POST /token HTTP/1.1
     Host: server.example.com
     Content-Type: application/x-www-form-urlencoded

     type=client_credentials&client_id=s6BhdRkqt3&client_secret=47HDu8s

   The authorization server MUST validate the client credentials and if
   valid issues an access a refresh
   token response as described in
   Section 2.3.2.1.

   For example:

     HTTP/1.1 200 OK
     Content-Type: application/json
     Cache-Control: no-store

     {
       "access_token":"SlAV32hkKG",
       "expires_in":3600,
       "refresh_token":"8xLOxBtZp8"
     }

   If addition to the access token.  When the access token
   expires, the client can request is invalid, a new access token without involving
   the authorization server returns an error
   response resource owner as long as described in Section 2.3.2.2 with one of the following
   error codes:

   o  "incorrect_client_credentials"

   For example:

     HTTP/1.1 400 Bad Request
     Content-Type: application/json
     Cache-Control: no-store

     {
       "error":"incorrect_client_credentials"
     }

2.10.  Assertion Flow authorization grant is still valid.
   The assertion flow token refresh method is used when a client wishes to exchange described in Section 5.1.4.

5.1.  Token Endpoint

   After obtaining authorization from the resource owner, clients
   request an
   existing security access token or assertion for from the authorization server's token
   endpoint.  When requesting an access token.  This flow
   is suitable when token, the client is authenticates
   with the resource owner or is acting on
   behalf of authorization server and includes the resource owner (based on authorization grant
   (in the content form of the assertion
   used).

   The assertion flow requires the client to obtain a assertion (such as
   a SAML [OASIS.saml-core-2.0-os] assertion) from verification code, resource owner credentials, an assertion issuer
   assertion, or to self-issue an assertion prior to initiating the flow. a refresh token).

   The
   assertion format, location of the process token endpoint can be found in the service
   documentation, or can be obtained by using [[ OAuth Discovery ]].
   The token endpoint URI MAY include a query component, which must be
   retained when adding additional query parameters.

   Since requests to the assertion is obtained, and token endpoint result in the method transmission of validating the assertion are defined by
   plain text credentials in the assertion
   issuer HTTP request and response, the
   authorization server, and are beyond server MUST require the scope use of this
   specification.

     +--------+                                  +---------------+
     |        |                                  |               |
     |        |>--(A)------ Assertion ---------->| Authorization |
     | Client |                                  |     Server    |
     |        |<--(B)---- Access Token ---------<|               |
     |        |                                  |               |
     +--------+                                  +---------------+

                         Figure 8: Assertion Flow

   The assertion flow illustrated in Figure 8 includes the following
   steps:

   (A)  The client sends an access token request a transport-layer
   mechanism when sending requests to the authorization
        server and includes an assertion.

   (B)  The authorization server validates the assertion and issues an
        access token.

2.10.1.  Client Requests Access Token token endpoints.  Servers MUST
   support TLS 1.2 as defined in [RFC5246] and MAY support addition
   mechanisms with equivalent protections.

   The client requests obtains an access token by making an HTTP "POST" request
   to the constructing a token endpoint. request.
   The client constructs a the request URI by adding
   the following parameters to the request:

   type
         REQUIRED.  The parameter value MUST be set to "assertion".

   assertion_format
         REQUIRED.  The format of the assertion as defined by the
         authorization server.  The value MUST be an absolute URI.

   assertion
         REQUIRED.  The assertion.

   client_id
         OPTIONAL.  The client identifier as described in Section 2.1.
         The authorization server MAY require including the by:

   o  Adding its client credentials with to the request based on the assertion properties.

   client_secret
         OPTIONAL.  The client secret as described in
      Section 2.1.  MUST
         NOT be included 3.1.  For example, if the "client_id" parameter is omitted.

   scope
         OPTIONAL.  The scope client uses a set of basic
      client credentials, it adds the "client_id" and "client_secret"
      parameters to the access request expressed as a list
         of space-delimited strings.  The value of (or uses the "scope" parameter
         is defined by HTTP Basic authentication
      scheme).

   o  Adding the authorization server.  If grand in the value contains
         multiple space-delimited strings, their order does not matter,
         and each string adds form of a verification code,
      resource owner credentials, an assertion, or refresh token.  If
      the client is acting on behalf of itself (the client is also the
      resource owner), no additional access range information is needed.  The
      authorization grant is added to the
         requested scope. request URI query component
      using the "application/x-www-form-urlencoded" format
         OPTIONAL. as described
      below.

5.1.1.  Verification Code

   The response format requested by the client.  Value
         MUST be one of "json", "xml", or "form".  Alternatively, the client MAY use includes the HTTP "Accept" header field with verification code using following parameters:

   code
         REQUIRED.  The verification code received from the desired
         media type.  Defaults to "json" if omitted and no "Accept"
         header field is present.
         authorization server.

   redirect_uri
         REQUIRED.  The redirection URI used in the initial request.

   For example, the client makes the following HTTPS request (line
   breaks are for display purposes only):

     POST /token HTTP/1.1
     Host: server.example.com
     Content-Type: application/x-www-form-urlencoded

     type=assertion&assertion_format=_______&assertion=_______

     client_id=s6BhdRkqt3&
     client_secret=gX1fBat3bV&code=i1WsRn1uB1&
     redirect_uri=https%3A%2F%2Fclient%2Eexample%2Ecom%2Fcb

   The authorization server MUST validate verify that the assertion verification code,
   client identity, client secret, and if redirection URI are all valid
   issues an access token response as described in Section 2.3.2.1.  The
   authorization server SHOULD NOT issue a refresh token.

   For example:

     HTTP/1.1 200 OK
     Content-Type: application/json
     Cache-Control: no-store

     {
       "access_token":"SlAV32hkKG",
       "expires_in":3600
     } and
   match its stored association.  If the request is invalid, valid, the
   authorization server returns an error issues a successful response as described in
   Section 2.3.2.2 with one of the following
   error codes:

   o  "invalid_assertion"

   o  "unknown_format"

   For example:

     HTTP/1.1 400 Bad Request
     Content-Type: application/json
     Cache-Control: no-store

     {
       "error":"invalid_assertion"
     }

   Authorization servers SHOULD issue access tokens with a limited
   lifetime and require clients to refresh them by requesting a new
   access token using the same assertion if it is still valid.
   Otherwise the 5.1.5.

5.1.2.  Resource Owner Credentials

   The client MUST obtain a new valid assertion.

2.11.  Native Application Considerations

   Native application are clients running as native code on includes the end-
   user's computer or device (i.e. executing outside a browser or as a
   desktop program).  These clients are often capable of interacting
   with (or embedding) resource owner credentials using the
   following parameters: [[ add internationalization consideration for
   username and password ]]

   username
         REQUIRED.  The end-user's user-agent but are incapable username.

   password
         REQUIRED.  The end-user's password.

   scope
         OPTIONAL.  The scope of
   receiving callback requests from the server (incapable of acting access request expressed as
   an HTTP server).

   Native application clients can utilize many a list
         of space-delimited strings.  The value of the flows "scope" parameter
         is defined in
   this specification with little or no changes.  For example:

   o  Launch an external user-agent by the authorization server.  If the value contains
         multiple space-delimited strings, their order does not matter,
         and have it redirect back each string adds an additional access range to the
         requested scope.

   For example, the client using a custom URI scheme.  This works with makes the web following HTTPS request (line
   breaks are for display purposes only):

     POST /token HTTP/1.1
     Host: server.example.com
     Content-Type: application/x-www-form-urlencoded

     client_id=s6BhdRkqt3&client_secret=
     47HDu8s&username=johndoe&password=A3ddj3w

   The authorization server
      flow MUST validate the client credentials and user-agent flow.

   o  Launch an external user-agent
   end-user credentials and poll for changes to if valid issues an access token response as
   described in Section 5.1.5.

   If the window
      title.  This works with client is acting on behalf of itself (the client is also the web server flow with a server-hosted
      custom redirect result page that puts
   resource owner), the verification code in client authentication alone suffice and the
      title.

   o  Use an embedded user-agent
   "username" and obtain "password" parameters MUST NOT be used.

5.1.3.  Assertion

   The client includes the redirection URI.  This
      works with assertion using the web server flow and user-agent flow.

   o  Use following parameters:

   assertion_type
         REQUIRED.  The format of the device profile with assertion as defined by the
         authorization server.  The value MUST be an external or embedded user-agent. absolute URI.

   assertion
         REQUIRED.  The application will open assertion.

   scope
         OPTIONAL.  The scope of the access request expressed as a user-agent and then poll list
         of space-delimited strings.  The value of the "scope" parameter
         is defined by the authorization server for results.

   o  Use server.  If the username and password flow value contains
         multiple space-delimited strings, their order does not matter,
         and prompt each string adds an additional access range to the end-users
         requested scope.

   For example, the client makes the following HTTPS request (line
   breaks are for display purposes only):

     POST /token HTTP/1.1
     Host: server.example.com
     Content-Type: application/x-www-form-urlencoded

     client_id=s6BhdRkqt3&client_secret=diejdsks&
     assertion_type=urn%3Aoasis%3Anames%sAtc%3ASAML%3A2.0%3Aassertion&
     assertion=PHNhbWxwOl...[ommited for
      their credentials.  This is generally discouraged as it hands the
      end-user's password directly to brevity]...ZT4%3D

   The authorization server MUST validate the 3rd party and may not work
      with some authentication schemes.

   When choosing between launching an external browser assertion and if valid
   issues an embedded
   user-agent, developers should consider the following:

   o  External user-agents may improve completion rate access token response as the end-user
      may already be logged-in described in Section 5.1.5.  The
   authorization server SHOULD NOT issue a refresh token.

   Authorization servers SHOULD issue access tokens with a limited
   lifetime and not have require clients to re-authenticate.

   o  Embedded user-agents often offer refresh them by requesting a better end-user flow, as they
      remove the need to switch context and open new windows.

   o  Embedded user-agents are less secure because users are
      authenticating in unidentified window without
   access to token using the
      protections offered by many user-agents.

3.  Refreshing an Access same assertion if it is still valid.
   Otherwise the client MUST obtain a new valid assertion.

5.1.4.  Refresh Token

   Token refresh is used when the lifetime of an access token is shorter
   than the lifetime of the authorization grant.  It allows clients enables the client
   to obtain a new access token without having to go through the
   authorization flow again or involve the resource owner.

     +--------+                                  +---------------+
     |        |         Client Credentials,      |               |
     |        |>--(A)----- Refresh Token ------->| Authorization |
     | Client |                                  |     Server    |
     |        |<--(B)----- Access Token --------<|               |
     |        |                                  |               |
     +--------+                                  +---------------+

                    Figure 9: Refreshing an Access Token

   To refresh a token, the client constructs an HTTP "POST" request to
   the token endpoint and includes the following parameters in the HTTP
   request body using the "application/x-www-form-urlencoded" content
   type as defined by [W3C.REC-html401-19991224]:

   type
         REQUIRED.  The parameter value MUST be set to "refresh".

   client_id
         REQUIRED.  The client identifier as described in Section 2.1.

   client_secret
         REQUIRED if the client was issued a secret. resource owner.

   The client secret. includes the refresh token using the following parameters:

   refresh_token
         REQUIRED.  The refresh token associated with the access token
         to be refreshed.

   format
         OPTIONAL.  The response format requested by the client.  Value
         MUST be one of "json", "xml", or "form".  Alternatively, the
         client MAY use the HTTP "Accept" header field with the desired
         media type.  Defaults to "json" if omitted and no "Accept"
         header field is present.

   For example, the client makes the following HTTPS request (line break
   are for display purposes only):

     POST /token HTTP/1.1
     Host: server.example.com
     Content-Type: application/x-www-form-urlencoded

     type=refresh_token&client_id=s6BhdRkqt3&client_secret=8eSEIpnqmM

     client_id=s6BhdRkqt3&client_secret=8eSEIpnqmM
     &refresh_token=n4E9O119d

   The authorization server MUST verify the client credential, credentials, the
   validity of the refresh token, and that the resource owner's
   authorization is still valid.  If the request is valid, the authorization server issues an access token
   authorization server issues an access token response as described in
   Section 5.1.5.  The authorization server MAY issue a new refresh
   token in which case the client MUST NOT use the previous refresh
   token and replace it with the newly issued refresh token.

5.1.5.  Access Token Response

   After receiving and verifying a valid and authorized access token
   request from the client, the authorization server issues the access
   token and optional refresh token, and constructs the response by
   adding the following parameters to the entity body of the HTTP
   response with a 200 status code (OK):

   The token response contains the following parameters:

   access_token
         REQUIRED.  The access token issued by the authorization server.

   expires_in
         OPTIONAL.  The duration in seconds of the access token
         lifetime.

   refresh_token
         OPTIONAL.  The refresh token used to obtain new access tokens
         using the same end-user access grant as described in
         Section 5.1.4.

   scope
         OPTIONAL.  The scope of the access token as a list of space-
         delimited strings.  The value of the "scope" parameter is
         defined by the authorization server.  If the value contains
         multiple space-delimited strings, their order does not matter,
         and each string adds an additional access range to the
         requested scope.

   The parameters are including in the entity body of the HTTP response
   using the "application/json" media type as described in Section 2.3.2.1. defined by [RFC4627].  The authorization server
   MAY issue
   parameters are serialized into a new refresh token in which case JSON structure by adding each
   parameter at the client highest structure level.  Parameter names and string
   values are included as JSON strings.  Numerical values are included
   as JSON numbers.

   The authorization server MUST NOT use include the previous refresh token and replace it HTTP "Cache-Control"
   response header field with the newly issued
   refresh token. a value of "no-store" in any response
   containing tokens, secrets, or other sensitive information.

   For example:

     HTTP/1.1 200 OK
     Content-Type: application/json
     Cache-Control: no-store

     {
       "access_token":"SlAV32hkKG",
       "expires_in":3600
       "expires_in":3600,
       "refresh_token":"8xLOxBtZp8"
     }

5.1.6.  Error Response

   If the token request is invalid, invalid or unauthorized, the authorization
   server returns an error constructs the response by adding the following parameter to
   the entity body of the HTTP response with a a 400 status code (Bad
   Request) using the "application/json" media type:

   error
         REQUIRED.  The error code as described in Section 2.3.2.2 with one of the following
   error codes:

   o  "incorrect_client_credentials"

   o  "authorization_expired" 5.1.6.1.

   For example:

     HTTP/1.1 400 Bad Request
     Content-Type: application/json
     Cache-Control: no-store

     {
       "error":"incorrect_client_credentials"
     }

4.

5.1.6.1.  Error Codes

   [[ expalain each error code: ]]

   o  "redirect_uri_mismatch"

   o  "bad_verification_code"

   o  "incorrect_client_credentials"

   o  "unauthorized_client'" - The client is not permitted to use this
      authorization grant type.

   o  "invalid_assertion"

   o  "unknown_format"

   o  "authorization_expired"

6.  Accessing a Protected Resource

   Clients access protected resources by presenting an access token to
   the resource server.

   For example:

     GET /resource HTTP/1.1
     Host: server.example.com
     Authorization: Token token="vF9dft4qmT"

   Access tokens act as bearer tokens, where the token string acts as a
   shared symmetric secret.  This requires treating the access token
   with the same care as other secrets (e.g. end-user passwords).
   Access tokens SHOULD NOT be sent in the clear over an insecure
   channel.

   However, when it is necessary to transmit bearer tokens in the clear
   without a secure channel, authorization servers SHOULD issue access
   tokens with limited scope and lifetime to reduce the potential risk
   from a compromised access token.

   Clients SHOULD NOT make authenticated requests with an access token
   to unfamiliar resource servers, especially when using bearer tokens,
   regardless of the presence of a secure channel.

   The methods used by the resource server to validate the access token
   are beyond the scope of this specification, but generally involve an
   interaction or coordination between the resource server and
   authorization server.

   The resource server MUST validate the access token and ensure it has
   not expired and that its scope covers the requested resource.  If the
   token expired or is invalid, the resource server MUST reply with an
   HTTP 401 status code (Unauthorized) and include the HTTP
   "WWW-Authenticate" response header as described in Section 5.1. 7.1.

   For example:

     HTTP/1.1 401 Unauthorized
     WWW-Authenticate: Token realm='Service', error='token_expired'

   Clients make authenticated token requests using the "Authorization"
   request header field as described in Section 4.1. 6.1.  Alternatively,
   clients MAY include the access token using the HTTP request URI in
   the query component as described in Section 4.2, 6.2, or in the HTTP body
   when using the "application/x-www-form-urlencoded" content type as
   described in Section 4.3. 6.3.

   Clients SHOULD only use the request URI or body when the
   "Authorization" request header field is not available, and MUST NOT
   use more than one method in each request. [[ specify error ]]

4.1.

6.1.  The Authorization Request Header

   The "Authorization" request header field is used by clients to make
   authenticated token requests.  The client uses the "token" attribute
   to include the access token in the request.

   The "Authorization" header field uses the framework defined by
   [RFC2617] as follows:

     credentials    = "Token" RWS access-token [ CS 1#auth-param ]
     access-token   = "token" "=" <"> token <">
     CS             = OWS "," OWS

4.2.

6.2.  URI Query Parameter

   When including the access token in the HTTP request URI, the client
   adds the access token to the request URI query component as defined
   by [RFC3986] using the "oauth_token" parameter.

   For example, the client makes the following HTTPS request:

     GET /resource?oauth_token=vF9dft4qmT HTTP/1.1
     Host: server.example.com

   The HTTP request URI query can include other request-specific
   parameters, in which case, the "oauth_token" parameters SHOULD be
   appended following the request-specific parameters, properly
   separated by an "&" character (ASCII code 38).

   The resource server MUST validate the access token and ensure it has
   not expired and its scope includes the requested resource.  If the
   resource expired or is not valid, the resource server MUST reply with
   an HTTP 401 status code (Unauthorized) and include the HTTP
   "WWW-Authenticate" response header as described in Section 5.1.

4.3. 7.1.

6.3.  Form-Encoded Body Parameter

   When including the access token in the HTTP request entity-body, the
   client adds the access token to the request body using the
   "oauth_token" parameter.  The client can use this method only if the
   following REQUIRED conditions are met:

   o  The entity-body is single-part.

   o  The entity-body follows the encoding requirements of the
      "application/x-www-form-urlencoded" content-type as defined by
      [W3C.REC-html401-19991224].

   o  The HTTP request entity-header includes the "Content-Type" header
      field set to "application/x-www-form-urlencoded".

   o  The HTTP request method is "POST", "PUT", or "DELETE".

   The entity-body can include other request-specific parameters, in
   which case, the "oauth_token" parameters SHOULD be appended following
   the request-specific parameters, properly separated by an "&"
   character (ASCII code 38).

   For example, the client makes the following HTTPS request:

     POST /resource HTTP/1.1
     Host: server.example.com
     Content-Type: application/x-www-form-urlencoded
     oauth_token=vF9dft4qmT

   The resource server MUST validate the access token and ensure it has
   not expired and its scope includes the requested resource.  If the
   resource expired or is not valid, the resource server MUST reply with
   an HTTP 401 status code (Unauthorized) and include the HTTP
   "WWW-Authenticate" response header as described in Section 5.1.

5. 7.1.

7.  Identifying a Protected Resource

   Clients access protected resources after locating the appropriate
   end-user authorization endpoint and token endpoints endpoint and obtaining an
   access token.  In many cases, interacting with a protected resource
   requires prior knowledge of the protected resource properties and
   methods, as well as its authentication requirements (i.e.
   establishing client identity, locating the end-user authorization and
   token endpoints).

   However, there are cases in which clients are unfamiliar with the
   protected resource, including whether the resource requires
   authentication.  When clients attempt to access an unfamiliar
   protected resource without an access token, the resource server
   denies the request and informs the client of the required credentials
   using an HTTP authentication challenge.

   In addition, when receiving an invalid authenticated request, the
   resource server issues an authentication challenge including the
   error type and message.

5.1.

7.1.  The WWW-Authenticate Response Header

   A resource server receiving a request for a protected resource
   without a valid access token MUST respond with a 401 (Unauthorized)
   or 403 (Forbidden) HTTP status code, and include at least one "Token"
   "WWW-Authenticate" response header field challenge.

   The "WWW-Authenticate" header field uses the framework defined by
   [RFC2617] as follows:

     challenge       = "Token" RWS token-challenge

     token-challenge = realm
                       [ CS error ]
                       [ CS 1#auth-param ]

     error           = "error" "=" <"> token <">

   The "realm" attribute is used to provide the protected resources
   partition as defined by [RFC2617].

   The "error" attribute is used to inform the client the reason why an
   access request was declined. [[ Add list of error codes ]]

6.

8.  Security Considerations

   [[ Todo ]]

7.

9.  IANA Considerations

   [[ Not Yet ]]

Appendix A.  Contributors

   The following people contributed to preliminary versions of this
   document: Blaine Cook (BT), Brian Eaton (Google), Yaron Goland
   (Microsoft), Brent Goldman (Facebook), Raffi Krikorian (Twitter),
   Luke Shepard (Facebook), and Allen Tom (Yahoo!).  The content and
   concepts within are a product of the OAuth community, WRAP community,
   and the OAuth Working Group.

   The OAuth Working Group has dozens of very active contributors who
   proposed ideas and wording for this document, including: [[ If your
   name is missing or you think someone should be added here, please
   send Eran a note - don't be shy ]]

   Michael Adams, Andrew Arnott, Dirk Balfanz, Brian Campbell, Leah
   Culver, Igor Faynberg, George Fletcher, Evan Gilbert, Justin Hart,
   John Kemp, Torsten Lodderstedt, Eve Maler, James Manger, Chuck
   Mortimore, Justin Richer, Peter Saint-Andre, Nat Sakimura, Rob Sayre,
   Marius Scurtescu, Justin Smith, and Franklin Tse.

Appendix B.  Acknowledgements

   [[ Add OAuth 1.0a authors + WG contributors ]]

Appendix C.  Differences from OAuth 1.0a

   [[ Todo ]]

Appendix D.  Document History

   [[ to be removed by RFC editor before publication as an RFC ]]

   -07

   o  Major rewrite of entire document structure.

   o  Removed device profile.

   o  Added verification code support to user-agent flow.

   o  Removed multiple formats support, leaving JSON as the only format.

   o  Changed assertion "assertion_format" parameter to
      "assertion_type".

   o  Removed "type" parameter from token endpoint.

   -06

   o  Editorial changes, corrections, clarifications, etc.

   o  Removed conformance section.

   o  Moved authors section to contributors appendix.

   o  Added section on native applications.

   o  Changed error response to use the requested format.  Added support
      for HTTP "Accept" header.

   o  Flipped the order of the web server and user-agent flows.

   o  Renamed assertion flow "format" parameter name to
      "assertion_format" to resolve conflict.

   o  Removed the term identifier from token definitions.  Added a
      cryptographic token definition.

   o  Added figure titles.

   o  Added server response 401 when client tried to authenticate using
      multiple credentials.

   o  Clarified support for TLS alternatives, and added requirement for
      TLS 1.2 support for token endpoint.

   o  Removed all signature and cryptography.

   o  Removed all discovery.

   o  Updated HTML4 reference.

   -05

   o  Corrected device example.

   o  Added client credentials parameters to the assertion flow as
      OPTIONAL.

   o  Added the ability to send client credentials using an HTTP
      authentication scheme.

   o  Initial text for the "WWW-Authenticate" header (also added scope
      support).

   o  Change authorization endpoint to end-user endpoint.

   o  In the device flow, change the "user_uri" parameter to
      "verification_uri" to avoid confusion with the end-user endpoint.

   o  Add "format" request parameter and support for XML and form-
      encoded responses.

   -04

   o  Changed all token endpoints to use "POST"

   o  Clarified the authorization server's ability to issue a new
      refresh token when refreshing a token.

   o  Changed the flow categories to clarify the autonomous group.

   o  Changed client credentials language not to always be server-
      issued.

   o  Added a "scope" response parameter.

   o  Fixed typos.

   o  Fixed broken document structure.

   -03
   o  Fixed typo in JSON error examples.

   o  Fixed general typos.

   o  Moved all flows sections up one level.

   -02

   o  Removed restriction on "redirect_uri" including a query.

   o  Added "scope" parameter.

   o  Initial proposal for a JSON-based token response format.

   -01

   o  Editorial changes based on feedback from Brian Eaton, Bill Keenan,
      and Chuck Mortimore.

   o  Changed device flow "type" parameter values and switch to use only
      the token endpoint.

   -00

   o  Initial draft based on a combination of WRAP and OAuth 1.0a.

8.

10.  References

8.1.

10.1.  Normative References

   [I-D.ietf-httpbis-p1-messaging]
              Fielding, R., Gettys, J., Mogul, J., Nielsen, H.,
              Masinter, L., Leach, P., Berners-Lee, T., and J. Reschke,
              "HTTP/1.1, part 1: URIs, Connections, and Message
              Parsing", draft-ietf-httpbis-p1-messaging-09 (work in
              progress), March 2010.

   [NIST FIPS-180-3]
              National Institute of Standards and Technology, "Secure
              Hash Standard (SHS). FIPS PUB 180-3, October 2008".

   [RFC2045]  Freed, N. and N. Borenstein, "Multipurpose Internet Mail
              Extensions (MIME) Part One: Format of Internet Message
              Bodies", RFC 2045, November 1996.

   [RFC2104]  Krawczyk, H., Bellare, M., and R. Canetti, "HMAC: Keyed-
              Hashing for Message Authentication", RFC 2104,
              February 1997.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC2616]  Fielding, R., Gettys, J., Mogul, J., Frystyk, H.,
              Masinter, L., Leach, P., and T. Berners-Lee, "Hypertext
              Transfer Protocol -- HTTP/1.1", RFC 2616, June 1999.

   [RFC2617]  Franks, J., Hallam-Baker, P., Hostetler, J., Lawrence, S.,
              Leach, P., Luotonen, A., and L. Stewart, "HTTP
              Authentication: Basic and Digest Access Authentication",
              RFC 2617, June 1999.

   [RFC2818]  Rescorla, E., "HTTP Over TLS", RFC 2818, May 2000.

   [RFC3023]  Murata, M., St. Laurent, S., and D. Kohn, "XML Media
              Types", RFC 3023, January 2001.

   [RFC3447]  Jonsson, J. and B. Kaliski, "Public-Key Cryptography
              Standards (PKCS) #1: RSA Cryptography Specifications
              Version 2.1", RFC 3447, February 2003.

   [RFC3629]  Yergeau, F., "UTF-8, a transformation format of ISO
              10646", STD 63, RFC 3629, November 2003.

   [RFC3986]  Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
              Resource Identifier (URI): Generic Syntax", STD 66,
              RFC 3986, January 2005.

   [RFC4627]  Crockford, D., "The application/json Media Type for
              JavaScript Object Notation (JSON)", RFC 4627, July 2006.

   [RFC5246]  Dierks, T. and E. Rescorla, "The Transport Layer Security
              (TLS) Protocol Version 1.2", RFC 5246, August 2008.

   [W3C.REC-html401-19991224]
              Hors, A., Jacobs, I., and D. Raggett, D., and I. Jacobs, "HTML 4.01
              Specification", World Wide Web Consortium
              Recommendation REC-html401-19991224, December 1999,
              <http://www.w3.org/TR/1999/REC-html401-19991224>.

8.2.

10.2.  Informative References

   [I-D.hammer-oauth]
              Hammer-Lahav, E., "The OAuth 1.0 Protocol",
              draft-hammer-oauth-10 (work in progress), February 2010.

   [I-D.hardt-oauth]
              Hardt, D., Tom, A., Eaton, B., and Y. Goland, "OAuth Web
              Resource Authorization Profiles", draft-hardt-oauth-01
              (work in progress), January 2010.

   [OASIS.saml-core-2.0-os]
              Cantor, S., Kemp, J., Philpott, R., and E. Maler,
              "Assertions and Protocol for the OASIS Security Assertion
              Markup Language (SAML) V2.0", OASIS Standard saml-core-
              2.0-os, March 2005.

Authors' Addresses

   Eran Hammer-Lahav (editor)
   Yahoo!

   Email: eran@hueniverse.com
   URI:   http://hueniverse.com

   David Recordon
   Facebook

   Email: davidrecordon@facebook.com
   URI:   http://www.davidrecordon.com/

   Dick Hardt
   Microsoft

   Email: dick.hardt@gmail.com
   URI:   http://dickhardt.org/