draft-ietf-v6ops-bb-deployment-scenarios-01.txt   draft-ietf-v6ops-bb-deployment-scenarios-02.txt 
IPv6 Working Group Salman Asadullah Network Working Group S. Asadullah
INTERNET DRAFT Adeel Ahmed Internet-Draft A. Ahmed
April 2005 Ciprian Popoviciu Expires: November 20, 2005 C. Popoviciu
Cisco Systems Cisco Systems
Jordi Palet J. Palet
Consulintel Consulintel
May 19, 2005
ISP IPv6 Deployment Scenarios in Broadband Access Networks ISP IPv6 Deployment Scenarios in Broadband Access Networks
<draft-ietf-v6ops-bb-deployment-scenarios-01.txt> <draft-ietf-v6ops-bb-deployment-scenarios-02.txt>
Status of this Memo Status of this Memo
This document is an Internet-Draft and is subject to all provisions By submitting this Internet-Draft, each author represents that any
of section 3 of RFC3667. By submitting this Internet-Draft, each applicable patent or other IPR claims of which he or she is aware
author represents that any applicable patent or other IPR claims of have been or will be disclosed, and any of which he or she becomes
which he or she is aware have been or will be disclosed, and any of aware will be disclosed, in accordance with Section 6 of BCP 79.
which he or she become aware will be disclosed, in accordance with
RFC3668.
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as other groups may also distribute working documents as Internet-
Internet-Drafts. Drafts.
Internet-Drafts are draft documents valid for a maximum of six Internet-Drafts are draft documents valid for a maximum of six months
months and may be updated, replaced, or obsoleted by other documents and may be updated, replaced, or obsoleted by other documents at any
at any time. It is inappropriate to use Internet-Drafts as reference time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress." material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt. http://www.ietf.org/ietf/1id-abstracts.txt.
The list of Internet-Draft Shadow Directories can be accessed at The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html. http://www.ietf.org/shadow.html.
This Internet-Draft will expire on November 20, 2005.
Copyright Notice
Copyright (C) The Internet Society (2005).
Abstract Abstract
This document provides detailed description of IPv6 deployment and This document provides detailed description of IPv6 deployment and
integration methods and scenarios in today's Service Provider (SP) integration methods and scenarios in today's Service Provider (SP)
Broadband (BB) networks in coexistence with deployed IPv4 services. Broadband (BB) networks in coexistence with deployed IPv4 services.
Cable/HFC, BB Ethernet, xDSL and WLAN are the main BB technologies Cable/HFC, BB Ethernet, xDSL and WLAN are the main BB technologies
that are currently deployed, and discussed in this document. The that are currently deployed, and discussed in this document. The
emerging PLC/BPL access technology is also discussed for completion emerging PLC/BPL access technology is also discussed for completion
purposes. In this document we will discuss main components of IPv6 purposes. In this document we will discuss main components of IPv6
BB networks and their differences from IPv4 BB networks and how IPv6 BB networks and their differences from IPv4 BB networks and how IPv6
is deployed and integrated in each of these BB technologies using is deployed and integrated in each of these BB technologies using
tunneling mechanisms and native IPv6. tunneling mechanisms and native IPv6.
Table of Contents: Table of Contents
1. Introduction..................................................3
2. IPv6 Based BB Services........................................4 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 4
3. Scope of the Document.........................................5 2. IPv6 Based BB Services . . . . . . . . . . . . . . . . . . . 4
4. Core Backbone Network.........................................5 3. Scope of the Document . . . . . . . . . . . . . . . . . . . 5
4.1 Layer 2 Access Provider...................................6 4. Core/Backbone Network . . . . . . . . . . . . . . . . . . . 6
4.2 Layer3 Access Provider....................................6 4.1 Layer 2 Access Provider Network . . . . . . . . . . . . . 7
5. Tunneling Options.............................................7 4.2 Layer3 Access Provider Network . . . . . . . . . . . . . . 7
5.1 Access over Tunnels-customers with public IPv4 address....7 5. Tunneling Overview . . . . . . . . . . . . . . . . . . . . . 8
5.2 Access over Tunnels-customers with private IPv4 address...8 5.1 Access over Tunnels-Customers with Public IPv4 Address . . 9
5.3 Transition a portion of the IPv4 infrastructure...........8 5.2 Access over Tunnels-Customers with Private IPv4 Address . 9
6. Broadband Cable Networks .....................................9 5.3 Transition a Portion of the IPv4 Infrastructure . . . . . 10
6.1 Broadband Cable Network Elements .........................9 6. Broadband Cable Networks . . . . . . . . . . . . . . . . . . 10
6.2 Deploying IPv6 in Cable Networks.........................10 6.1 Broadband Cable Network Elements . . . . . . . . . . . . . 11
6.2.1 Bridged CMTS Network .............................11 6.2 Deploying IPv6 in Cable Networks . . . . . . . . . . . . . 12
6.2.2 Routed CMTS Network ..............................14 6.2.1 Deploying IPv6 in a Bridged CMTS Network . . . . . . . 13
6.3 IPv6 Multicast ..........................................22 6.2.2 Deploying IPv6 in a Routed CMTS Network . . . . . . . 16
6.4 IPv6 QoS ................................................22 6.2.3 IPv6 Multicast . . . . . . . . . . . . . . . . . . . . 25
6.5 IPv6 Security Considerations.............................23 6.2.4 IPv6 QoS . . . . . . . . . . . . . . . . . . . . . . . 26
6.6 IPv6 Network Management .................................24 6.2.5 IPv6 Security Considerations . . . . . . . . . . . . . 27
6.6.1 Using IPv6 for Management in Cable Networks ......24 6.2.6 IPv6 Network Management . . . . . . . . . . . . . . . 28
6.6.2 Updates to MIBs/Standards to support IPv6 ........25 7. Broadband DSL Networks . . . . . . . . . . . . . . . . . . . 29
7. Broadband DSL Networks.......................................25 7.1 DSL Network Elements . . . . . . . . . . . . . . . . . . . 29
7.1 DSL Network Elements ....................................25 7.2 Deploying IPv6 in IPv4 DSL Networks . . . . . . . . . . . 30
7.2 Deploying IPv6 in IPv4 DSL Networks......................26 7.2.1 Point-to-Point Model . . . . . . . . . . . . . . . . . 31
7.2.1 Point-to-Point Model..............................27 7.2.2 PPP Terminated Aggregation (PTA) Model . . . . . . . . 33
7.2.2 PPP Terminated Aggregation (PTA) Model............29 7.2.3 L2TPv2 Access Aggregation (LAA) Model . . . . . . . . 36
7.2.3 L2TP Access Aggregation (LAA) Model...............31 7.2.4 Hybrid Model for IPv4 and IPv6 Service . . . . . . . . 38
7.2.4 Hybrid Model for IPv4 and IPv6 Service ...........34 7.3 IPv6 Multicast . . . . . . . . . . . . . . . . . . . . . . 41
7.3 IPv6 Multicast...........................................36 7.3.1 ASM Based Deployments . . . . . . . . . . . . . . . . 41
7.3.1 ASM Based Deployments..............................36 7.3.2 SSM Based Deployments . . . . . . . . . . . . . . . . 42
7.3.1 SSM Based Deployments..............................37 7.4 IPv6 QoS . . . . . . . . . . . . . . . . . . . . . . . . . 43
7.4 IPv6 QoS.................................................38 7.5 IPv6 Security Considerations . . . . . . . . . . . . . . . 43
7.5 IPv6 Security Considerations.............................38 7.6 IPv6 Network management . . . . . . . . . . . . . . . . . 44
7.6 IPv6 Network Management..................................39 8. Broadband Ethernet Networks . . . . . . . . . . . . . . . . 45
8. Broadband Ethernet Networks..................................39 8.1 Ethernet Access Network Elements . . . . . . . . . . . . . 45
8.1 Ethernet Access Network Elements .......................39 8.2 Deploying IPv6 in IPv4 Broadband Ethernet Networks . . . . 46
8.2 Deploying IPv6 in IPv4 BB Ethernet Networks.............40 8.2.1 Point-to-Point Model . . . . . . . . . . . . . . . . . 47
8.2.1 Point-to-Point Model.............................41 8.2.2 PPP Terminated Aggregation (PTA) Model . . . . . . . . 49
8.2.2 PPP Terminated Aggregation (PTA) Model...........43 8.2.3 L2TPv2 Access Aggregation (LAA) Model . . . . . . . . 51
8.2.3 L2TP Access Aggregation (LAA) Model..............45 8.2.4 Hybrid Model for IPv4 and IPv6 Service . . . . . . . . 53
8.2.4 Hybrid Model for IPv4 and IPv6 Service...........46 8.3 IPv6 Multicast . . . . . . . . . . . . . . . . . . . . . . 55
8.3 IPv6 Multicast..........................................47 8.4 IPv6 QoS . . . . . . . . . . . . . . . . . . . . . . . . . 56
8.4 IPv6 QoS................................................49 8.5 IPv6 Security Considerations . . . . . . . . . . . . . . . 56
8.5 IPv6 Security Considerations............................50 8.6 IPv6 Network Management . . . . . . . . . . . . . . . . . 57
8.6 IPv6 Network Management.................................50 9. Wireless LAN . . . . . . . . . . . . . . . . . . . . . . . . 58
9. Broadband Wireless LAN Networks..............................51 9.1 WLAN Deployment Scenarios . . . . . . . . . . . . . . . . 58
9.1 WLAN Deployment Scenarios...............................51 9.1.1 Layer 2 Switch Between AP and Edge Router . . . . . . 59
9.1.1 Layer 2 Switch Between AP and SP Edge Router.....52 9.1.2 Access Router Between AP and SP Edge Router . . . . . 62
9.1.2 Access Router Between AP and SP Edge Router......54 9.1.3 PPP Based Model . . . . . . . . . . . . . . . . . . . 64
9.1.3 PPP Based Model..................................56 9.2 IPv6 Multicast . . . . . . . . . . . . . . . . . . . . . . 66
9.2 IPv6 Multicast..........................................58 9.3 IPv6 QoS . . . . . . . . . . . . . . . . . . . . . . . . . 68
9.3 IPv6 QoS................................................60 9.4 IPv6 Security Considerations . . . . . . . . . . . . . . . 68
9.4 IPv6 Security Considerations............................60 9.5 IPv6 Network Management . . . . . . . . . . . . . . . . . 69
9.5 IPv6 Network Management.................................61 10. Broadband Power Line Communications (PLC) . . . . . . . . . 70
10. Broadband Power Line Communications (PLC)...................61 10.1 PLC/BPL Access Network Elements . . . . . . . . . . . . 70
10.1 PLC/BPL Access Network Elements.........................62 10.2 Deploying IPv6 in IPv4 PLC/BPL . . . . . . . . . . . . . 71
10.2 Deploying IPv6 in IPv4 PLC/BPL..........................63 10.2.1 IPv6 Related Infrastructure Changes . . . . . . . . 72
10.2.1 IPv6 Related Infrastructure Changes..............63 10.2.2 Addressing . . . . . . . . . . . . . . . . . . . . . 72
10.2.2 Addressing.......................................63 10.2.3 Routing . . . . . . . . . . . . . . . . . . . . . . 73
10.2.3 Routing..........................................64 10.3 IPv6 Multicast . . . . . . . . . . . . . . . . . . . . . 73
10.3 IPv6 Multicast..........................................65 10.4 IPv6 QoS . . . . . . . . . . . . . . . . . . . . . . . . 73
10.4 IPv6 QoS................................................65 10.5 IPv6 Security Considerations . . . . . . . . . . . . . . 73
10.5 IPv6 Security Considerations............................65 10.6 IPv6 Network Management . . . . . . . . . . . . . . . . 74
10.6 IPv6 Network Management.................................65 11. Gap Analysis . . . . . . . . . . . . . . . . . . . . . . . . 74
11. Gap Analysis................................................65 12. IANA Considerations . . . . . . . . . . . . . . . . . . . . 76
12. Contributors................................................67 13. Security Considerations . . . . . . . . . . . . . . . . . . 76
13. Acknowledgments.............................................67 14. References . . . . . . . . . . . . . . . . . . . . . . . . . 76
14. References..................................................67 14.1 Normative References . . . . . . . . . . . . . . . . . . 76
Authors Addresses...............................................70 14.2 Informative References . . . . . . . . . . . . . . . . . 78
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . 79
Intellectual Property and Copyright Statements . . . . . . . 80
1. Introduction 1. Introduction
With the exponential growth of the Internet and increasing number of With the exponential growth of the Internet and increasing number of
end users, SPs are looking for new ways to evolve their current end users, SPs are looking for new ways to evolve their current
network architecture to meet the needs of Internet ready appliances, network architecture to meet the needs of Internet ready appliances,
new applications and services. IPv6 is designed to enable SPs to new applications and services. IPv6 is designed to enable SPs to
meet these challenges and provide new services to their customers. meet these challenges and provide new services to their customers.
As the number of devices per BB user increase exponentially As the number of devices per BB user increase exponentially
worldwide, Cable, DSL, Ethernet to the Home, Wireless, PLC/BPL and worldwide, Cable, DSL, Ethernet to the Home, Wireless, PLC/BPL and
other always-on access technologies can benefit from the huge other always-on access technologies can benefit from the huge address
address range [RFC3513] of IPv6. Other benefits of IPv6 include the range [9] of IPv6. Other benefits of IPv6 include the capability to
capability to enhance end-to-end security, mobile communications, enhance end-to-end security, mobile communications, and ease system
and ease system management burdens. Some examples include management burdens. Some examples include peer-to-peer communication
peer-to-peer communication without NAT traversal problems, being without NAT traversal problems, being able to access securely devices
able to access securely devices at home from work, enhanced IP at home from work, enhanced IP Mobility [24] and so on.
Mobility [RFC3775] and so on.
Therefore SPs are aggressively evaluating the capabilities of IPv6 Therefore SPs are aggressively evaluating the capabilities of IPv6 to
to meet these needs. Some countries have taken a lead role in this meet these needs. Some countries have taken a lead role in this race
race and moved from testing and evaluation to real deployments of and moved from testing and evaluation to real deployments of IPv6 in
IPv6 in the BB arena. Japan is a prime example along with other the BB arena. Japan is a prime example along with other countries
countries that are looking at moving towards large scale production that are looking at moving towards large scale production deployments
deployments of IPv6. of IPv6.
The SPs are deploying tunneling mechanisms to transport IPv6 over The SPs are deploying tunneling mechanisms to transport IPv6 over
their existing IPv4 networks as a start as well as deploying native their existing IPv4 networks as a start as well as deploying native
IPv6 where possible. Deployment of tunneling solutions is simpler, IPv6 where possible. Deployment of tunneling solutions is simpler,
easier and more economical to start the IPv6 services, as they easier and more economical to start the IPv6 services, as they
require minimal investments and network infrastructure changes in require minimal investments and network infrastructure changes in
current SP model. Depending on customer needs and requirements a current SP model. Depending on customer needs and requirements a
native IPv6 deployment option might be more scalable and provide native IPv6 deployment option might be more scalable and provide
required service performance. required service performance.
2. IPv6 Based BB Services 2. IPv6 Based BB Services
At this point IPv6 based services are seen as a differentiator that At this point IPv6 based services are seen as a differentiator that
enables SPs to take advantage of the large IPv6 address space to enables SPs to take advantage of the large IPv6 address space to the
the extent that subscribers get up to fixed /48 prefixes versus the extent that subscribers get up to fixed /48 prefixes versus the
single, temporary IPv4 addresses. Such resources allow the SPs to single, temporary IPv4 addresses. Such resources allow the SPs to
better position themselves against the competition. The IPv6 better position themselves against the competition. The IPv6
deployments can be seen as a driver for lower service support costs deployments can be seen as a driver for lower service support costs
by eliminating NAT with its negative impact on applications and its by eliminating NAT with its negative impact on applications and its
complex behavior. Another reason of IPv6 being popular in some complex behavior. Another reason of IPv6 being popular in some
countries might be the government driven financial incentives and countries might be the government driven financial incentives and
favorable legislation towards the IPs who are deploying IPv6. favorable legislation towards the IPs who are deploying IPv6.
NTT East, Japan started a commercial dual-stack (devices capable of NTT East, Japan started a commercial dual-stack (devices capable of
forwarding IPv4 and IPv6 packets) IPv6 unicast service option early forwarding IPv4 and IPv6 packets) IPv6 unicast service option early
this year for its ADSL and FTTH subscribers, under the name of this year for its ADSL and FTTH subscribers, under the name of
FLETS.Net [Dual Stack Access]. FLETS.Net [26]. For these users the IPv6 addresses are dedicated
(/64 per user) and are used when needed. However, this IPv6 service
For these users the IPv6 addresses are dedicated (/64 per user) and is available only to the NTT-East ADSL and FTTH subscribers who are
are used when needed. However, this IPv6 service is available only part of FLETS.NET network and at this point does not provide
to the NTT-East ADSL and FTTH subscribers who are part of FLETS.NET connectivity to the IPv6 Internet.
network and at this point does not provide connectivity to the
IPv6 Internet.
Some ISPs that are currently providing IPv4 based Multicast and Some ISPs that are currently providing IPv4 based Multicast and VoIP
VoIP services are evaluating IPv6 to take advantage of the huge services are evaluating IPv6 to improve and expand their service.
address space and other useful features. The Multicast services The Multicast services consist of video and audio streaming of
consist of video and audio streaming of several programs (streams). several programs (streams). The content provider delivers these
The content provider will have certain content (which is of user streams to BB subscribers. One of today's challenges is the fact
interest) and they would send these multicast streams to BB that when done through IPv4, there is generally a single device
subscribers. Today, when done through IPv4, there is generally a directly attached to the CPE that receives the Multicast stream. By
single device directly attached to the CPE that receives the moving to IPv6, ISP should be capable to provide multiple streams to
Multicast stream. By moving to IPv6, ISP should be capable to multiple devices on the customer site.
provide multiple streams to multiple devices on the customer site.
For instance in Japan, Cable TV and dish services are not very For instance in Japan, Cable TV and dish services are not very
popular, the users expect everything through the broadcasted, free popular, the users expect content mostly through the broadcasted,
programs (traditional TV). In case of BB users however, they can get free programs (traditional TV). In case of BB users however, they
some extra content through the SP, which is very reasonably priced can get additional content through their SP, which can be delivered
for 20 Mbps or 10/100 Mbps of bandwidth. Users sign up with a at a reasonable priced for 20 Mbps or 10/100 Mbps of bandwidth.
content provider that is multicasting several channels of video and Users sign up with a content provider that is multicasting several
audio. A subscriber would join the multicast group of interest channels of video and audio. A subscriber would join the multicast
(after authentication) and will start receiving the stream(s). An group of interest (after authentication) and will start receiving the
example of a video stream could be Disney movies and an example of stream(s). An example of a video stream could be Disney movies and
an audio stream could be Karaoke (part of same *,G group). Similar an example of an audio stream could be Karaoke (part of same *,G
to Cable TV, where customers sign up and pay for single programs or group). Similar to Cable TV, where customers sign up and pay for
packages of programs. single programs or packages of programs.
SPs are also offering IPv6 services over wireless links using 802.11 SPs are also offering IPv6 services over wireless links using 802.11
compliant WiFi Hot Spots. This enables users to take notebook PCs and compliant WiFi Hot Spots. This enables users to take notebook PCs
PDAs (Windows 2003 supports IPv6 capable Internet Explorer and Media and PDAs (Windows 2003 supports IPv6 capable Internet Explorer and
Player 9) along with them and connect to the Internet from various Media Player 9) along with them and connect to the Internet from
locations without the restriction of staying indoors. various locations without the restriction of staying indoors.
3. Scope of the Document 3. Scope of the Document
The focus of this document is to present the options available in This document presents the options available in deploying IPv6
deploying IPv6 services in the access portion of a BB Service services in the access portion of a BB Service Provider network
Provider network namely Cable/HFC, BB Ethernet, xDSL, WLAN and namely Cable/HFC, BB Ethernet, xDSL, WLAN and PLC/BPL.
PLC/BPL.
This document briefly discusses the other elements of a provider This document briefly discusses the other elements of a provider
network as well. It provides different viable IPv6 deployment and network as well. It provides different viable IPv6 deployment and
integration techniques and models for each of the above mentioned BB integration techniques and models for each of the above mentioned BB
technologies separately. The example list is not exhaustive but it technologies individually. The example list is not exhaustive but it
tries to be representative. tries to be representative.
This document analyzes, how all the important parts of current IPv4 This document analyzes, how all the important parts of current IPv4
based Cable/HFC, BB Ethernet, xDSL, WLAN and PLC/BPL networks will based Cable/HFC, BB Ethernet, xDSL, WLAN and PLC/BPL networks will
behave when IPv6 is integrated and deployed. behave when IPv6 is integrated and deployed.
The following important pieces are discussed: The following important pieces are discussed:
A. Available tunneling options A. Available tunneling options
B. Devices that would require to be upgraded to support IPv6 B. Devices that would require to be upgraded to support IPv6
C. Available IPv6 address assignment techniques and their use C. Available IPv6 address assignment techniques and their use
D. Possible IPv6 Routing options and their use D. Possible IPv6 Routing options and their use
E. IPv6 unicast and multicast packet transmission E. IPv6 unicast and multicast packet transmission
F. Required IPv6 QoS parameters F. Required IPv6 QoS parameters
G. Required IPv6 Security parameters G. Required IPv6 Security parameters
H. Required IPv6 Network Management parameters H. Required IPv6 Network Management parameters
It is important to note that the addressing rules provided It is important to note that the addressing rules provided throughout
throughout this document represent an example that follows the this document represent an example that follows the current
current assignment policies and recommendations of the registries. assignment policies and recommendations of the registries. They can
They can be however adapted to the network and business model needs be however adapted to the network and business model needs of the
of the ISPs. ISPs.
The scope of the document is to advise on the ways of upgrading The scope of the document is to advise on the ways of upgrading an
an existing infrastructure to support IPv6 services. The existing infrastructure to support IPv6 services. The recommendation
recommendation to upgrade a device to dual-stack does not stop an to upgrade a device to dual-stack does not stop an SP from adding a
SP from adding a new device to its network to perform the neccessary new device to its network to perform the neccessary IPv6 functions
IPv6 functions discussed. The costs involved could be offset by discussed. The costs involved could be offset by lower impact on the
lower impact on the existing IPv4 services. existing IPv4 services.
4. Core/Backbone Network 4. Core/Backbone Network
This section intends to briefly discuss the some important elements This section intends to briefly discuss some important elements of a
of a provider network tied to the deployment of IPv6. A more provider network tied to the deployment of IPv6. A more detailed
detailed description of the core network is provided in other description of the core network is provided in other documents [25].
documents [ISP Networks IPv6 Scenarios].
There are two networks identified in the Broadband deployments: There are two networks identified in the Broadband deployments:
A. Access Provider Network: This network provides the broadband A. Access Provider Network: This network provides the broadband
access and aggregates the subscribers. The subscriber traffic is access and aggregates the subscribers. The subscriber traffic is
handed over to the Service Provider at Layer 2 or 3. handed over to the Service Provider at Layer 2 or 3.
B. Service Provider Network: This network provides Intranet and B. Service Provider Network: This network provides Intranet and
Internet IP connectivity for the subscribers. Internet IP connectivity for the subscribers.
The Service Provider network structure beyond the Edge routers that The Service Provider network structure beyond the Edge routers that
interface with the Access provider is beyond the scope of this interface with the Access provider is beyond the scope of this
document. document.
4.1 Layer 2 Access Provider Network 4.1 Layer 2 Access Provider Network
The Access Provider can deploy a Layer 2 network and perform no The Access Provider can deploy a Layer 2 network and perform no
skipping to change at page 6, line 15 skipping to change at page 7, line 13
B. Service Provider Network: This network provides Intranet and B. Service Provider Network: This network provides Intranet and
Internet IP connectivity for the subscribers. Internet IP connectivity for the subscribers.
The Service Provider network structure beyond the Edge routers that The Service Provider network structure beyond the Edge routers that
interface with the Access provider is beyond the scope of this interface with the Access provider is beyond the scope of this
document. document.
4.1 Layer 2 Access Provider Network 4.1 Layer 2 Access Provider Network
The Access Provider can deploy a Layer 2 network and perform no The Access Provider can deploy a Layer 2 network and perform no
routing of the subscriber traffic to the SP. The devices routing of the subscriber traffic to the SP. The devices that
that support each specific access technology are aggregated into a support each specific access technology are aggregated into a highly
highly redundant, resilient and scalable layer two core. The network redundant, resilient and scalable layer two core. The network core
core can involve various technologies such as Ethernet, ATM etc. can involve various technologies such as Ethernet, ATM etc. The
The Service Provider Edge Router connects to the Access Provider Service Provider Edge Router connects to the Access Provider core.
core.
In this type of a network the impact of deploying IPv6 is minimal. In this type of a network the impact of deploying IPv6 is minimal.
The network is transparent to the Layer 3 protocol. The only possible The network is transparent to the Layer 3 protocol. The only
changes would come with the intent of filtering and monitoring IPv6 possible changes would come with the intent of filtering and
traffic based on layer 2 information such as IPv6 Ether Type Protocol monitoring IPv6 traffic based on layer 2 information such as IPv6
ID (0x86DD) or IPv6 multicast specific MAC addresses Ether Type Protocol ID (0x86DD) or IPv6 multicast specific MAC
(3333.xxxx.xxxx). addresses (3333.xxxx.xxxx).
4.2 Layer3 Access Provider Network 4.2 Layer3 Access Provider Network
The Access Provider can choose to terminate the Layer 2 domain and The Access Provider can choose to terminate the Layer 2 domain and
route the IP traffic to the Service Provider network. Access Routers route the IP traffic to the Service Provider network. Access Routers
are used to aggregate the subscriber traffic and route it over a are used to aggregate the subscriber traffic and route it over a
Layer3 core to the SP Edge Routers. In this case the impact of the Layer3 core to the SP Edge Routers. In this case the impact of the
IPv6 deployment is significant. IPv6 deployment is significant.
The case studies in this document only present the significant The case studies in this document only present the significant
skipping to change at page 6, line 56 skipping to change at page 8, line 5
A. IPv6 Tunneling: As a temporary solution, the Access Providers can A. IPv6 Tunneling: As a temporary solution, the Access Providers can
choose to use a tunneling mechanism to forward the subscriber IPv6 choose to use a tunneling mechanism to forward the subscriber IPv6
traffic to the Service Provider Edge Router. This approach has the traffic to the Service Provider Edge Router. This approach has the
least impact on the Access Provider network however, as the number of least impact on the Access Provider network however, as the number of
users increase and the amount of IPv6 traffic grows, the ISP will users increase and the amount of IPv6 traffic grows, the ISP will
have to evolve to one of the scenarios listed below. have to evolve to one of the scenarios listed below.
B. Native IPv6 Deployment: The Access Provider routers are upgraded B. Native IPv6 Deployment: The Access Provider routers are upgraded
to support IPv6 and can become dual-stack. In a dual-stack network to support IPv6 and can become dual-stack. In a dual-stack network
an IPv6 IGP such as OSPFv3 or IS-IS is enabled. RFC4029 discusses the an IPv6 IGP such as OSPFv3 or IS-IS is enabled. RFC4029 discusses
IGP selection options with their benefits and drawbacks. the IGP selection options with their benefits and drawbacks.
C. MPLS 6PE Deployment [6PE]: If the Access Provider is running MPLS C. MPLS 6PE Deployment [27]: If the Access Provider is running MPLS
in its IPv4 core it could use 6PE to forward IPv6 traffic over it. in its IPv4 core it could use 6PE to forward IPv6 traffic over it.
In this case only a subset of routers close to the edge of the In this case only a subset of routers close to the edge of the
network need to be IPv6 aware. With this approach BGP becomes network need to be IPv6 aware. With this approach BGP becomes
important in order to support 6PE. important in order to support 6PE.
The 6PE approach has the advantage of having minimal impact on the The 6PE approach has the advantage of having minimal impact on the
Access Provider network. Fewer devices need to be upgraded and Access Provider network. Fewer devices need to be upgraded and
configured while the MPLS core continues to switch the traffic configured while the MPLS core continues to switch the traffic un-
un-aware of the fact that it transports both IPv4 and IPv6 traffic. aware of the fact that it transports both IPv4 and IPv6 traffic. 6PE
6PE should be leveraged only if MPLS is already deployed in the should be leveraged only if MPLS is already deployed in the network.
network. At the time of writing this document, a major disadvantage At the time of writing this document, a major disadvantage of the 6PE
of the 6PE solution is the fact that it does not support multicast solution is the fact that it does not support multicast IPv6 traffic.
IPv6 traffic.
The native approach has the advantage of supporting IPv6 The native approach has the advantage of supporting IPv6 multicast
multicast traffic but it may imply a significant impact on the IPv4 traffic but it may imply a significant impact on the IPv4 operational
operational network from software, configuration and possibly network from software, configuration and possibly hardware upgrade
hardware upgrade perspective. perspective.
More detailed Core Network deployment recommendations are discussed More detailed Core Network deployment recommendations are discussed
in other documents [ISP Networks IPv6 Scenarios]. The handling of in other documents RFC4029. The handling of IPv6 traffic in the Core
IPv6 traffic in the Core of the Access Provider Network will not be of the Access Provider Network will not be discussed for the
discussed for the remainder of this document. remainder of this document.
5. Tunneling Overview 5. Tunneling Overview
Service Providers might not be able to deploy native IPv6 today due Service Providers might not be able to deploy native IPv6 today due
to the cost associated with HW and SW upgrades, the infrastructure to the cost associated with HW and SW upgrades, the infrastructure
changes needed to their current network and the current demand for changes needed to their current network and the current demand for
the service. For these reasons, some SPs might choose tunneling the service. For these reasons, some SPs might choose tunneling
based transition mechanisms to start an IPv6 service offering and based transition mechanisms to start an IPv6 service offering and
move to native IPv6 deployment at a later time. move to native IPv6 deployment at a later time.
Several tunneling mechanisms were developed specifically Several tunneling mechanisms were developed specifically to transport
to transport IPv6 over existing IPv4 infrastructures. Several of IPv6 over existing IPv4 infrastructures. Several of them have been
them have been standardized and their use depends on the existing SP standardized and their use depends on the existing SP IPv4 network
IPv4 network and the structure of the IPv6 service. The and the structure of the IPv6 service. The requirements for the most
requirements for the most appropriate mechanisms are described in appropriate mechanisms are described in [35] with more updates to
[Assisted Tunneling] and [v6tc] with more updates to follow. follow. Deploying IPv6 using tunneling techniques can imply as
Deploying IPv6 using tunneling techniques can imply as little little changes to the network as upgrading SW on tunnel end points
changes to the network as upgrading SW on tunnel end points (TEP). (TEP). A Service Provider could use tunneling to deploy IPv6 in the
A Service Provider could use tunneling to deploy IPv6 in the
following scenarios: following scenarios:
5.1 Access over Tunnels-customers with Public IPv4 Address 5.1 Access over Tunnels-Customers with Public IPv4 Address
If the customer is a residential user, it can initiate the tunnel If the customer is a residential user, it can initiate the tunnel
directly from the IPv6 capable host to a tunnel termination router directly from the IPv6 capable host to a tunnel termination router
located in the NAP or ISP network. The tunnel type used should be located in the NAP or ISP network. The tunnel type used should be
decided by the SP but it should take into consideration its decided by the SP but it should take into consideration its
availability on commonly used software running on the host machine. availability on commonly used software running on the host machine.
Out of the many tunneling mechanisms developed [RFC3053, RFC3056, Out of the many tunneling mechanisms developed [[2], [3], [4], [28],
RFC2473, ISATAP, RFC2893, RFC2529] some are more popular than the [5], [6]] some are more popular than the others.
others.
If the end customer has a GWR installed, then it could be used to If the end customer has a GWR installed, then it could be used to
originate the tunnel and thus offer native IPv6 access to multiple originate the tunnel and thus offer native IPv6 access to multiple
hosts on the customer network. In this case the GWR would need to be hosts on the customer network. In this case the GWR would need to be
upgraded to dual-stack in order to support IPv6. The GWR can be owned upgraded to dual-stack in order to support IPv6. The GWR can be
by the customer or by the SP. owned by the customer or by the SP
5.2 Access over Tunnels-Customers with Private IPv4 Address 5.2 Access over Tunnels-Customers with Private IPv4 Address
If the end customer receives a private IPv4 address and needs to If the end customer receives a private IPv4 address and needs to
initiate a tunnel through NAT, techniques like 6to4 will not work initiate a tunnel through NAT, techniques like 6to4 may not work
since they rely on Public IPv4 address. In this case the end user since they rely on Public IPv4 address. In this case, unless the
might have to use tunnels that can operate through NATs (such as existing CPE supports protocol-41-forwarding, the end user might have
Teredo tunnel [OPS]). to use tunnels that can operate through NATs (such as Teredo tunnel
[30]).
The customer has the option to initiate the tunnel from the device The customer has the option to initiate the tunnel from the device
(GWR) that performs the NAT functionality, similar to the GWR (GWR) that performs the NAT functionality, similar to the GWR
scenario discussed in section 5.1. This will imply HW replacement or scenario discussed in section 5.1. This will imply HW replacement or
SW upgrade and a native IPv6 environment behind the GWR. SW upgrade and a native IPv6 environment behind the GWR. Most GWRs
support protocol-41-forwarding which means that hosts can initiate
the tunnels in which case the GWR is not affected by the IPv6
service.
It is important to note that the customers of a Service Provider can It is important to note that the customers of a Service Provider can
choose to establish tunnels to publicly available and free tunnel choose to establish tunnels to publicly available and free tunnel
services. Even though the quality of such services might not be high, services. Even though the quality of such services might not be
they provide free IPv6 access. In designing their IPv6 services, the high, they provide free IPv6 access. In designing their IPv6
SPs should take into considerations such options available to their services, the SPs should take into considerations such options
potential customers. The IPv6 deployment should support services available to their potential customers. The IPv6 deployment should
(like multicast, VoIPv6 etc) and a level of quality that would make support services (like multicast, VoIPv6 etc) and a level of quality
the access through the SP worthwhile to potential subscribers. that would make the access through the SP worthwhile to potential
subscribers.
It is also worth observing that initiating an IPv6 tunnel over IPv4 It is also worth observing that initiating an IPv6 tunnel over IPv4
through already established IPv4 IPsec sessions would provide a through already established IPv4 IPsec sessions would provide a
certain level of security to the IPv6 traffic [Tunnel through IPsec]. certain level of security to the IPv6 traffic [Tunnel through IPsec].
5.3 Transition a Portion of the IPv4 Infrastructure 5.3 Transition a Portion of the IPv4 Infrastructure
Tunnels can be used to transport the IPv6 traffic across a defined Tunnels can be used to transport the IPv6 traffic across a defined
segment of the network. As an example, the customer might connect segment of the network. As an example, the customer might connect
natively to the Network Access Provider and a tunnel is used to natively to the Network Access Provider and a tunnel is used to
transit the traffic over IPv4 to the ISP. In this case the tunnel transit the traffic over IPv4 to the ISP. In this case the tunnel
choice depends on its capabilities (for example, whether it supports choice depends on its capabilities (for example, whether it supports
multicast or not), routing protocols used (there are several types multicast or not), routing protocols used (there are several types
that can transport layer 2 messages such as GRE, L2TPv3 or that can transport layer 2 messages such as GRE, L2TPv3 or
Pseudowire), manage-ability and scalability (dynamic versus static Pseudowire), manage-ability and scalability (dynamic versus static
tunnels). tunnels).
This scenario implies that the access portion of the network has been This scenario implies that the access portion of the network has been
upgraded to support dual stack so the savings provided by tunneling upgraded to support dual stack so the savings provided by tunneling
in this scenario are very small compared with the previous two. in this scenario are very small compared with the previous two
Depending on the number of sites requiring the service and scenarios. Depending on the number of sites requiring the service
considering the expenses required to manage the tunnels (some tunnels and considering the expenses required to manage the tunnels (some
are static while others are dynamic [Dynamic Tunnel]) in this case, tunnels are static while others are dynamic [29]) in this case, the
the SPs might find the native approach worth the additional SPs might find the native approach worth the additional investments.
investments.
In all the scenarios listed above the tunnel selection process should In all the scenarios listed above the tunnel selection process should
consider the IPv6 multicast forwarding capabilities if such service consider the IPv6 multicast forwarding capabilities if such service
is planned. As an example, 6to4 tunnels do not support IPv6 is planned. As an example, 6to4 tunnels do not support IPv6
multicast traffic. multicast traffic.
The operation, capabilities and deployment of various tunnel types The operation, capabilities and deployment of various tunnel types
has been discussed extensively in the documents referenced earlier as has been discussed extensively in the documents referenced earlier as
well as in [OPS, RFC3904]. Details of a tunnel based deployment are well as in [[30], [7]]. Details of a tunnel based deployment are
offered in the next section of this document (section 6). In the case offered in the next section of this document (section 6). In the
of Cable Access where the current DOCSIS specifications do not case of Cable Access where the current DOCSIS specifications do not
provide support for native IPv6 access. Although sections 7, 8, 9 provide support for native IPv6 access. Although sections 7, 8, 9
and 10 focus on a native IPv6 deployments over DSL, FTTH, Wireless and 10 focus on a native IPv6 deployments over DSL, FTTH, Wireless
and PLC/BPL because this approach is fully supported today, tunnel and PLC/BPL because this approach is fully supported today, tunnel
based solutions are also possible in these cases based on the based solutions are also possible in these cases based on the
guidelines of this section and some of the recommendations provided guidelines of this section and some of the recommendations provided
in section 6. in section 6.
6. Broadband Cable Networks 6. Broadband Cable Networks
This section describes the infrastructure that exists today in This section describes the infrastructure that exists today in cable
cable networks providing BB services to the home. It also describes networks providing BB services to the home. It also describes IPv6
IPv6 deployment options in these cable networks. deployment options in these cable networks.
DOCSIS standardizes and documents the operation of data over Cable DOCSIS standardizes and documents the operation of data over Cable
Networks. The current version of DOCSIS has limitations that do not Networks. The current version of DOCSIS has limitations that do not
allow for a smooth implementation of native IPv6 transport. Some of allow for a smooth implementation of native IPv6 transport. Some of
these limitations are discussed in this section. For this reason, these limitations are discussed in this section. For this reason,
the IPv6 deployment scenarios discussed in this section for the the IPv6 deployment scenarios discussed in this section for the
existent Cable Networks are tunnel based. The tunneling examples existent Cable Networks are tunnel based. The tunneling examples
presented here could also be applied to the other BB technologies presented here could also be applied to the other BB technologies
described in sections 7, 8, 9 and 10. described in sections 7, 8, 9 and 10.
6.1 Broadband Cable Network Elements 6.1 Broadband Cable Network Elements
Broadband cable networks are capable of transporting IP traffic to/ Broadband cable networks are capable of transporting IP traffic to/
from users to provide high speed Internet access and VOIP services. from users to provide high speed Internet access and VOIP services.
The mechanism of transporting IP traffic over cable networks is The mechanism of transporting IP traffic over cable networks is
outlined in the DOCSIS specification [RF Interface]. outlined in the DOCSIS specification [33].
Here are some of the key elements of a Cable network: Here are some of the key elements of a Cable network:
Cable (HFC) Plant: Hybrid Fiber Coaxial plant, used as the underlying Cable (HFC) Plant: Hybrid Fiber Coaxial plant, used as the underlying
transport transport
CMTS: Cable Modem Termination System (can be a Layer 2 bridging or CMTS: Cable Modem Termination System (can be a Layer 2 bridging or
Layer 3 routing CMTS) Layer 3 routing CMTS)
GWR: Residential Gateway Router (provides Layer 3 services to hosts) GWR: Residential Gateway Router (provides Layer 3 services to hosts)
skipping to change at page 10, line 17 skipping to change at page 12, line 7
ER: Edge Router ER: Edge Router
MSO: Multiple Service Operator MSO: Multiple Service Operator
Data Over Cable Service Interface Specification (DOCSIS): The Data Over Cable Service Interface Specification (DOCSIS): The
standards defining how data should be carried over cable networks. standards defining how data should be carried over cable networks.
Figure 6.1 illustrates the key elements of a Cable Network Figure 6.1 illustrates the key elements of a Cable Network
<--- ACCESS ---><------ HFC ------><----- Aggregation / Core -----> |--- ACCESS ---||------ HFC ------||----- Aggregation / Core -----|
+-----+ +------+ +-----+ +------+
|Host |--| GWR | |Host |--| GWR |
+-----+ +--+---+ +-----+ +--+---+
| _ _ _ _ _ _ | _ _ _ _ _ _
+------+ | | +------+ | |
| CM |---| | | CM |---| |
+------+ | | +------+ | |
| HFC | +------+ +--------+ | HFC | +------+ +--------+
| | | | | Edge | | | | | | Edge |
+-----+ +------+ | Network |---| CMTS |---| |===> ISP +-----+ +------+ | Network |---| CMTS |---| |===> ISP
skipping to change at page 10, line 42 skipping to change at page 12, line 33
+-----+ | GWR/ | | +-----+ | GWR/ | |
|Host |--| CM |---------+ |Host |--| CM |---------+
+-----+ | | +-----+ | |
+------+ Figure 6.1 +------+ Figure 6.1
6.2 Deploying IPv6 in Cable Networks 6.2 Deploying IPv6 in Cable Networks
One of the motivators for an MSO to deploy IPv6 over their Cable One of the motivators for an MSO to deploy IPv6 over their Cable
Network is to ease management burdens. IPv6 can be enabled on the Network is to ease management burdens. IPv6 can be enabled on the
CM, CMTS and ER for management purposes. Currently portions of the CM, CMTS and ER for management purposes. Currently portions of the
cable infrastructure use RFC1918 IPv4 addresses; however, there are cable infrastructure use [1] IPv4 addresses; however, there are a
a finite number of those. Thus, IPv6 could have utility in the finite number of those. Thus, IPv6 could have utility in the cable
cable space implemented on the management plane initially and later space implemented on the management plane initially and later on
on focused on the data plane for end user services. For more focused on the data plane for end user services. For more details on
details on using IPv6 for management in Cable Networks please refer using IPv6 for management in Cable Networks please refer to section
to section 6.6.1. 6.6.1.
There are two different deployment modes in current cable networks: There are two different deployment modes in current cable networks: a
a bridged CMTS environment and a routed CMTS environment. IPv6 can bridged CMTS environment and a routed CMTS environment. IPv6 can be
be deployed in both of these environments. deployed in both of these environments.
1. Bridged CMTS Network 1. Bridged CMTS Network
In this scenario, both the CM and CMTS bridge all data traffic. In this scenario, both the CM and CMTS bridge all data traffic.
Traffic to/from host devices is forwarded through the cable network Traffic to/from host devices is forwarded through the cable network
to the ER. The ER then routes traffic through the ISP network to the to the ER. The ER then routes traffic through the ISP network to the
Internet. The CM and CMTS support a certain degree of Layer 3 Internet. The CM and CMTS support a certain degree of Layer 3
functionality for management purposes. functionality for management purposes.
2. Routed CMTS Network 2. Routed CMTS Network
In a routed network, the CMTS forwards IP traffic to/from hosts In a routed network, the CMTS forwards IP traffic to/from hosts based
based on Layer 3 information using the IP source/destination address. on Layer 3 information using the IP source/destination address. The
The CM acts as a Layer-2 bridge for forwarding data traffic and CM acts as a Layer-2 bridge for forwarding data traffic and supports
supports some Layer 3 functionality for management purposes. some Layer 3 functionality for management purposes.
Some of the factors that hinder deployment of native IPv6 in current Some of the factors that hinder deployment of native IPv6 in current
cable networks include: routed and bridged cable networks include:
A. Problems with IPv6 Neighbor Discovery (ND) on CM and CMTS. These A. Problems with IPv6 Neighbor Discovery (ND) on CM and CMTS. These
devices rely on IGMP join messages to track membership of hosts that devices rely on IGMP join messages to track membership of hosts that
are part of a particular IP Multicast group. In order to support ND are part of a particular IP Multicast group. In order to support ND
the CM and CMTS will need to support IGMPv3/MLDv2 or v1 snooping. the CM and CMTS will need to support IGMPv3/MLDv2 or v1 snooping.
B. Classification of IPv6 traffic in the upstream and downstream B. Classification of IPv6 traffic in the upstream and downstream
direction. The CM and CMTS will need to support classification of direction. The CM and CMTS will need to support classification of
IPv6 packets in order to give them the appropriate priority and IPv6 packets in order to give them the appropriate priority and QoS.
QoS. Without proper classification all IPv6 traffic will need to be Without proper classification all IPv6 traffic will need to be sent
sent best effort (BE) which can cause problems when deploying best effort (BE) which can cause problems when deploying services
services like VOIP and IP Multicast video. like VOIP and IP Multicast video.
C. Changes need to be made to the DOCSIS specification to include C. Changes need to be made to the DOCSIS specification to include
support for IPv6 on the CM and CMTS. This is imperative for support for IPv6 on the CM and CMTS. This is imperative for
deploying native IPv6 over cable networks. deploying native IPv6 over cable networks.
Due to the above mentioned limitations in deployed cable networks, Due to the above mentioned limitations in deployed cable networks,
the only available option to cable operators is to use tunneling the only available option to cable operators is to use tunneling
techniques in order to transport IPv6 traffic over their current techniques in order to transport IPv6 traffic over their current IPv4
IPv4 infrastructure. The following sections will cover these infrastructure. The following sections will cover these deployment
deployment scenarios in more detail. scenarios in more detail.
6.2.1 Deploying IPv6 in a Bridged CMTS Network 6.2.1 Deploying IPv6 in a Bridged CMTS Network
In IPv4 the CM and CMTS act as Layer 2 bridges and forward all data In IPv4 the CM and CMTS act as Layer 2 bridges and forward all data
traffic to/from the hosts and the ER. The hosts use the ER as their traffic to/from the hosts and the ER. The hosts use the ER as their
Layer 3 next hop. If there is a GWR behind the CM it can act as a Layer 3 next hop. If there is a GWR behind the CM it can act as a
next hop for all hosts and forward data traffic to/from the ER. next hop for all hosts and forward data traffic to/from the ER.
When deploying IPv6 in this environment, the CM and CMTS will When deploying IPv6 in this environment, the CM and CMTS will
continue to be bridging devices in order to keep the transition continue to be bridging devices in order to keep the transition
smooth and reduce operational complexity. The CM and CMTS will need smooth and reduce operational complexity. The CM and CMTS will need
to bridge IPv6 unicast and multicast packets to/from the ER and the to bridge IPv6 unicast and multicast packets to/from the ER and the
hosts. If there is a GWR connected to the CM, it will need to forward hosts. If there is a GWR connected to the CM, it will need to
IPv6 unicast and multicast traffic to/from the ER. forward IPv6 unicast and multicast traffic to/from the ER.
IPv6 can be deployed in a bridged CMTS network either natively or via
tunneling. This section discusses the native deployment model. The
tunneling model is similar to ones described in sections 6.2.2.1 and
6.2.2.2.
Figure 6.2.1 illustrate the IPv6 deployment scenario Figure 6.2.1 illustrate the IPv6 deployment scenario
+-----+ +-----+ +-----+ +-----+
|Host |--| GWR | |Host |--| GWR |
+-----+ +--+--+ +-----+ +--+--+
| _ _ _ _ _ _ | _ _ _ _ _ _
| +------+ | | | +------+ | |
+--| CM |---| | +--| CM |---| |
+------+ | | +------+ | |
| HFC | +------+ +--------+ | HFC | +------+ +--------+
| | | | | Edge | | | | | | Edge |
+-----+ +------+ | Network |---| CMTS |---| |===> ISP +-----+ +------+ | Network |--| CMTS |--| |===> ISP
|Host |--| CM |---| | | | | Router | Network |Host |--| CM |---| | | | | Router | Network
+-----+ +------+ | | +------+ +--------+ +-----+ +------+ | | +------+ +--------+
|_ _ _ _ _ _| |_ _ _ _ _ _|
|-------------||---------------------------------||---------------|
<-------------><---------------------------------><--------------->
L3 Routed L2 Bridged L3 Routed L3 Routed L2 Bridged L3 Routed
Figure 6.2.1 Figure 6.2.1
6.2.1.1 IPv6 Related Infrastructure Changes 6.2.1.1 IPv6 Related Infrastructure Changes
In this scenario the CM and the CMTS bridge all data traffic so they In this scenario the CM and the CMTS bridge all data traffic so they
will need to support bridging of native IPv6 unicast and multicast will need to support bridging of native IPv6 unicast and multicast
traffic. The following devices have to be upgraded to dual stack: traffic. The following devices have to be upgraded to dual stack:
Host, GWR and ER. Host, GWR and ER.
skipping to change at page 13, line 4 skipping to change at page 15, line 15
6.2.1.2.2 IP Addressing for Hosts 6.2.1.2.2 IP Addressing for Hosts
If there is no GWR connected to the CM, the host behind the CM will If there is no GWR connected to the CM, the host behind the CM will
get a /64 prefix assigned to it via stateless autoconfiguration or get a /64 prefix assigned to it via stateless autoconfiguration or
DHCPv6. DHCPv6.
If using stateless auto-configuration, the host listens for routing If using stateless auto-configuration, the host listens for routing
advertisements (RA) from the ER. The RAs contain the /64 prefix advertisements (RA) from the ER. The RAs contain the /64 prefix
assigned to the segment. Upon receipt of an RA, the host constructs assigned to the segment. Upon receipt of an RA, the host constructs
the same way as DHCPv4 works today. The DHCPv6 messages exchanged its IPv6 address by combining the prefix in the RA (/64) and a unique
between the host and the DHCPv6 server are bridged by the CM and identifier (e.g., its modified EUI-64 format interface ID).
the CMTS.
If DHCPv6 is used to obtain an IPv6 address, it will work in much the
same way as DHCPv4 works today. The DHCPv6 messages exchanged
between the host and the DHCPv6 server are bridged by the CM and the
CMTS.
6.2.1.2.3 IP Addressing for GWR 6.2.1.2.3 IP Addressing for GWR
The GWR can use stateless auto-configuration (RA) to obtain an The GWR can use stateless auto-configuration (RA) to obtain an
address for its upstream interface, the link between itself and address for its upstream interface, the link between itself and the
the ER. This step is followed by a request via DHCP-PD (Prefix ER. This step is followed by a request via DHCP-PD (Prefix
Delegation) for a prefix shorter than /64, typically /48, which Delegation) for a prefix shorter than /64, typically /48 [8], which
in turn is divided into /64s and assigned to its downstream in turn is divided into /64s and assigned to its downstream
interfaces connecting to the hosts. interfaces connecting to the hosts.
6.2.1.3 Data Forwarding 6.2.1.3 Data Forwarding
The CM and CMTS must be able to bridge native IPv6 unicast and The CM and CMTS must be able to bridge native IPv6 unicast and
multicast traffic. The CMTS must provide IP connectivity between multicast traffic. The CMTS must provide IP connectivity between
hosts attached to CMs and must do so in a way that meets the hosts attached to CMs and must do so in a way that meets the
expectation of Ethernet attached customer equipment. In order to do expectation of Ethernet attached customer equipment. In order to do
that, the CM and CMTS must forward Neighbor Discovery (ND) packets that, the CM and CMTS must forward Neighbor Discovery (ND) packets
between ER and the hosts attached to the CM. between ER and the hosts attached to the CM.
Communication between hosts behind different CMs is always forwarded Communication between hosts behind different CMs is always forwarded
through the CMTS. IPv6 communication between the different sites through the CMTS. IPv6 communication between the different sites
relies on multicast IPv6 ND [RFC2461] frames being forwarded relies on multicast IPv6 ND [18] frames being forwarded correctly by
correctly by the CM and the CMTS. As with the CM, a bridged CMTS that the CM and the CMTS. As with the CM, a bridged CMTS that selectively
selectively forwards multicast datagrams on the basis of IGMPv2 will forwards multicast datagrams on the basis of MLD will potentially
potentially break IPv6 ND. break IPv6 ND.
In order to support IPv6 multicast applications across DOCSIS cable In order to support IPv6 multicast applications across DOCSIS cable
networks, the CM and bridging CMTS need to support IGMPv3/MLDv2 or v1 networks, the CM and bridging CMTS need to support IGMPv3/MLDv2 or v1
snooping. MLD is almost identical to IGMP in IPv4, only the name and snooping. MLD is almost identical to IGMP in IPv4, only the name and
numbers are changed. MLDv2 is identical to IGMPv3 and also supports numbers are changed. MLDv2 is identical to IGMPv3 and also supports
ASM (Any Source Multicast) and SSM (Single Source Multicast) ASM (Any Source Multicast) and SSM (Single Source Multicast) service
service models. Implementation work on CM/CMTS should be minimal models. Implementation work on CM/CMTS should be minimal because the
because the only significant difference between IPv4 IGMPv3 and IPv6 only significant difference between IPv4 IGMPv3 and IPv6 MLDv2 is the
MLDv2 is the longer addresses in the protocol. longer addresses in the protocol.
6.2.1.4 Routing 6.2.1.4 Routing
The hosts install a default route that points to the ER or the GWR. The hosts install a default route that points to the ER or the GWR.
No routing protocols are needed on these devices which generally No routing protocols are needed on these devices which generally have
have limited resources. If there is a GWR present it will also use limited resources. If there is a GWR present it will also use static
static default route to the ER. default route to the ER.
The ER runs an IGP such as OSPFv3 or IS-IS. The connected prefixes The ER runs an IGP such as OSPFv3 or IS-IS. The connected prefixes
have to be redistributed. If DHCP-PD is used, with every delegated have to be redistributed. If DHCP-PD is used, with every delegated
prefix a static route is installed by the ER. For this reason the prefix a static route is installed by the ER. For this reason the
static routes must also be redistributed. Prefix summarization static routes must also be redistributed. Prefix summarization
should be done at the ER. should be done at the ER.
its IPv6 address by combining the prefix in the RA (/64) and a unique
identifier (e.g., its modified EUI-64 format interface ID).
If DHCPv6 is used to obtain an IPv6 address, it will work in much
6.2.2 Deploying IPv6 in a Routed CMTS Network 6.2.2 Deploying IPv6 in a Routed CMTS Network
In an IPv4 routed CMTS network the CM still acts as a Layer-2 In an IPv4 routed CMTS network the CM still acts as a Layer-2 device
device and bridges all data traffic between its Ethernet interface and bridges all data traffic between its Ethernet interface and cable
and cable interface connected to the cable operator network. The CMTS interface connected to the cable operator network. The CMTS acts as
acts as a Layer 3 router and may also include the ER functionality. a Layer 3 router and may also include the ER functionality. The
The hosts and the GWR use the CMTS as their Layer 3 next hop. hosts and the GWR use the CMTS as their Layer 3 next hop.
When deploying IPv6 in a routed CMTS network, the CM still acts When deploying IPv6 in a routed CMTS network, the CM still acts as a
as a Layer-2 device and will need to bridge IPv6 unicast as well as Layer-2 device and will need to bridge IPv6 unicast as well as
multicast traffic. The CMTS/ER will need to either tunnel IPv6 multicast traffic. The CMTS/ER will need to either tunnel IPv6
traffic or natively support IPv6. The host and GWR will use the traffic or natively support IPv6. The host and GWR will use the
CMTS/ER as their Layer 3 next hop. CMTS/ER as their Layer 3 next hop.
There could be five possible deployment scenarios for IPv6 in a There could be five possible deployment scenarios for IPv6 in a
routed CMTS network: routed CMTS network:
1. IPv4 Cable (HFC) Network 1. IPv4 Cable (HFC) Network
In this scenario the cable network, including the CM and CMTS remain In this scenario the cable network, including the CM and CMTS remain
IPv4 devices. The host and ER are upgraded to dual-stack. This is the IPv4 devices. The host and ER are upgraded to dual-stack. This is
easiest way for a Cable Operator to provide IPv6 service as no the easiest way for a Cable Operator to provide IPv6 service as no
changes are made to the cable network. changes are made to the cable network.
2. IPv4 Cable (HFC) Network, GWR at Customer Site 2. IPv4 Cable (HFC) Network, GWR at Customer Site
In this case the cable network, including the CM and CMTS remain In this case the cable network, including the CM and CMTS remain IPv4
IPv4 devices. The host, GWR and ER are upgraded to dual-stack. This devices. The host, GWR and ER are upgraded to dual-stack. This
scenario is also easy to deploy since the cable operator just needs scenario is also easy to deploy since the cable operator just needs
to add GWR at the customer site. to add GWR at the customer site.
3. Dual-stacked Cable (HFC) Network, CM and CMTS Support IPv6 3. Dual-stacked Cable (HFC) Network, CM and CMTS Support IPv6
In this scenario the CMTS is upgraded to dual-stack to support IPv4 In this scenario the CMTS is upgraded to dual-stack to support IPv4
and IPv6. Since the CMTS supports IPv6 it can acts as an ER as well. and IPv6. Since the CMTS supports IPv6 it can acts as an ER as well.
The CM will act as a Layer-2 bridge but will need to bridge IPv6 The CM will act as a Layer-2 bridge but will need to bridge IPv6
unicast and multicast traffic. This scenario is not easy to deploy unicast and multicast traffic. This scenario is not easy to deploy
since it requires changes to the DOCSIS specification. The CM and since it requires changes to the DOCSIS specification. The CM and
skipping to change at page 15, line 5 skipping to change at page 17, line 23
4. Dual-stacked Cable (HFC) Network, Standalone GWR and CMTS Support 4. Dual-stacked Cable (HFC) Network, Standalone GWR and CMTS Support
IPv6 IPv6
In this scenario there is a standalone GWR connected to the CM. In this scenario there is a standalone GWR connected to the CM.
Since the IPv6 functionality exists on the GWR the CM does not need Since the IPv6 functionality exists on the GWR the CM does not need
to be dual-stack. The CMTS is upgraded to dual-stack and it can to be dual-stack. The CMTS is upgraded to dual-stack and it can
incorporate the ER functionality. This scenario may also require HW incorporate the ER functionality. This scenario may also require HW
and SW changes on the GWR and CMTS. and SW changes on the GWR and CMTS.
5. Dual-stacked Cable (HFC) Network, Embedded GWR/CM and CMTS Support 5. Dual-stacked Cable (HFC) Network, Embedded GWR/CM and CMTS
IPv6 Support IPv6
In this scenario the CM and GWR functionality exists on a single In this scenario the CM and GWR functionality exists on a single
device which needs to be upgraded to dual-stack. The CMTS will also device which needs to be upgraded to dual-stack. The CMTS will also
need to be upgraded to a dual-stack device. This scenario is also need to be upgraded to a dual-stack device. This scenario is also
difficult to deploy in existent cable network since it requires difficult to deploy in existent cable network since it requires
changes on the Embedded GWR/CM and the CMTS. changes on the Embedded GWR/CM and the CMTS.
The DOCSIS specification will also need to be modified to allow The DOCSIS specification will also need to be modified to allow
native IPv6 support on the Embedded GWR/CM. native IPv6 support on the Embedded GWR/CM.
6.2.2.1 IPv4 Cable Network, Host and ER Upgraded to Dual-Stack 6.2.2.1 IPv4 Cable Network, Host and ER Upgraded to Dual-Stack
This is one of the most cost effective ways for a Cable Operator to This is one of the most cost effective ways for a Cable Operator to
offer IPv6 services to its customers. Since the cable network remains offer IPv6 services to its customers. Since the cable network
IPv4 there is relatively minimal cost involved in turning up IPv6 remains IPv4 there is relatively minimal cost involved in turning up
service. All IPv6 traffic is exchanged between the hosts and the ER. IPv6 service. All IPv6 traffic is exchanged between the hosts and
the ER.
Figure 6.2.2.1 illustrates this deployment scenario Figure 6.2.2.1 illustrates this deployment scenario
+-----------+ +------+ +--------+ +-----------+ +------+ +--------+
+-----+ +-------+ | Cable | | | | Edge | +-----+ +-------+ | Cable | | | | Edge |
|Host |--| CM |----| (HFC) |----| CMTS |----| |=>ISP |Host |--| CM |----| (HFC) |---| CMTS |---| |=>ISP
+-----+ +-------+ | Network | | | | Router | Network +-----+ +-------+ | Network | | | | Router | Network
+-----------+ +------+ +--------+ +-----------+ +------+ +--------+
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
()_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _() ()_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _()
IPv6-in-IPv4 tunnel IPv6-in-IPv4 tunnel
<---------><----------------------------------------><------------> |---------||----------------------------------------||------------|
IPv4/v6 IPv4 only IPv4/v6 IPv4/v6 IPv4 only IPv4/v6
Figure 6.2.2.1 Figure 6.2.2.1
6.2.2.1.1 IPv6 Related Infrastructure Changes 6.2.2.1.1 IPv6 Related Infrastructure Changes
In this scenario the CM and the CMTS will only need to support IPv4 In this scenario the CM and the CMTS will only need to support IPv4
so no changes need to be made to them or the cable network. The so no changes need to be made to them or the cable network. The
following devices have to be upgraded to dual stack: Host and ER. following devices have to be upgraded to dual stack: Host and ER.
6.2.2.1.2 Addressing 6.2.2.1.2 Addressing
The only device that needs to be assigned an IPv6 address at customer The only device that needs to be assigned an IPv6 address at customer
site is the host. Host address assignment can be done in multiple site is the host. Host address assignment can be done in multiple
ways. Depending on the tunneling mechanism used it could be ways. Depending on the tunneling mechanism used it could be
automatic or might require manual configuration. automatic or might require manual configuration.
The host still receives an IPv4 address using DHCPv4, which works The host still receives an IPv4 address using DHCPv4, which works the
the same way in currently deployed cable networks. In order to get same way in currently deployed cable networks. In order to get IPv6
IPv6 connectivity, host devices will also need an IPv6 address and connectivity, host devices will also need an IPv6 address and a means
a means to communicate with the ER. to communicate with the ER.
6.2.2.1.3 Data Forwarding 6.2.2.1.3 Data Forwarding
All IPv6 traffic will be sent to/from the ER and the host device. In All IPv6 traffic will be sent to/from the ER and the host device. In
order to transport IPv6 packets over the cable operator IPv4 order to transport IPv6 packets over the cable operator IPv4 network,
network, the host and the ER will need to use one of the available the host and the ER will need to use one of the available IPv6 in
IPv6 in IPv4 tunneling mechanisms. IPv4 tunneling mechanisms.
The host will use its IPv4 address to source the tunnel to the The host will use its IPv4 address to source the tunnel to the ER.
ER. All IPv6 traffic will be forwarded to the ER, encapsulated in All IPv6 traffic will be forwarded to the ER, encapsulated in IPv4
IPv4 packets. The intermediate IPv4 nodes will forward this traffic packets. The intermediate IPv4 nodes will forward this traffic as
as regular IPv4 packets. The ER will need to terminate the tunnel regular IPv4 packets. The ER will need to terminate the tunnel
and/or provide other IPv6 services. and/or provide other IPv6 services.
6.2.2.1.4 Routing 6.2.2.1.4 Routing
Routing configuration on the host will vary depending on Routing configuration on the host will vary depending on the
the tunneling technique used, in some cases a default or static tunneling technique used, in some cases a default or static route
route might be needed to forward traffic to the next hop. might be needed to forward traffic to the next hop.
The ER runs an IGP such as OSPFv3 or ISIS. The ER runs an IGP such as OSPFv3 or ISIS.
6.2.2.2 IPv4 Cable Network, Host, GWR and ER Upgraded to Dual-Stack 6.2.2.2 IPv4 Cable Network, Host, GWR and ER Upgraded to Dual-Stack
The cable operator can provide IPv6 services to its customers, in The cable operator can provide IPv6 services to its customers, in
this scenario, by adding a GWR behind the CM. Since the GWR will this scenario, by adding a GWR behind the CM. Since the GWR will
facilitate all IPv6 traffic to/from the host and the ER, the cable facilitate all IPv6 traffic to/from the host and the ER, the cable
network including the CM and CMTS do not need to support IPv6 and network including the CM and CMTS do not need to support IPv6 and can
can remain IPv4 devices. remain as IPv4 devices.
Figure 6.2.2.2 illustrates this deployment scenario Figure 6.2.2.2 illustrates this deployment scenario
+-----+ +-----+
|Host | |Host |
+--+--+ +--+--+
| +-----------+ +------+ +--------+ | +-----------+ +------+ +--------+
+---+---+ +-------+ | Cable | | | | Edge | +---+---+ +-------+ | Cable | | | | Edge |
| GWR |--| CM |----| (HFC) |----| CMTS |----| |=>ISP | GWR |--| CM |----| (HFC) |---| CMTS |---| |=>ISP
+-------+ +-------+ | Network | | | | Router | Network +-------+ +-------+ | Network | | | | Router | Network
+-----------+ +------+ +--------+ +-----------+ +------+ +--------+
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
()_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _() ()_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _()
IPv6-in-IPv4 tunnel IPv6-in-IPv4 tunnel
<---------><---------------------------------------><-------------> |---------||---------------------------------------||-------------|
IPv4/v6 IPv4 only IPv4/v6 IPv4/v6 IPv4 only IPv4/v6
Figure 6.2.2.2 Figure 6.2.2.2
6.2.2.2.1 IPv6 Related Infrastructure Changes 6.2.2.2.1 IPv6 Related Infrastructure Changes
In this scenario the CM and the CMTS will only need to support IPv4 In this scenario the CM and the CMTS will only need to support IPv4
so no changes need to be made to them or the cable network. The so no changes need to be made to them or the cable network. The
following devices have to be upgraded to dual stack: Host, GWR and following devices have to be upgraded to dual stack: Host, GWR and
ER. ER.
6.2.2.2.2 Addressing 6.2.2.2.2 Addressing
The only devices that needs to be assigned an IPv6 address at The only devices that needs to be assigned an IPv6 address at
customer site are the host and GWR. IPv6 address assignment can be customer site are the host and GWR. IPv6 address assignment can be
done statically at the GWR downstream interface. The GWR will send done statically at the GWR downstream interface. The GWR will send
out RA messages on its downstream interface which will be used by the out RA messages on its downstream interface which will be used by the
hosts to auto-configure themselves with an IPv6 address. The GWR can hosts to auto-configure themselves with an IPv6 address. The GWR can
also configure its upstream interface using RA messages from the ER also configure its upstream interface using RA messages from the ER
and use DHCP-PD for requesting a /48 prefix from the ER. This /48 and use DHCP-PD for requesting a /48 [8] prefix from the ER. This
prefix will be used to configure /64s on hosts connected to the GWR /48 prefix will be used to configure /64s on hosts connected to the
downstream interfaces. Currently the DHCP-PD functionality cannot be GWR downstream interfaces. Currently the DHCP-PD functionality
implemented if the DHCP-PD server is not the Edge Router. If the cannot be implemented if the DHCP-PD server is not the Edge Router.
DHCP-PD messages are relayed, the Edge Router does not have a If the DHCP-PD messages are relayed, the Edge Router does not have a
mechanism to learn the assigned prefixes and thus install the proper mechanism to learn the assigned prefixes and thus install the proper
routes to make that prefix reachable. Work is being done to address routes to make that prefix reachable. Work is being done to address
this issue, one idea being to provide the Edge Router with a snooping this issue, one idea being to provide the Edge Router with a snooping
mechanism. The uplink to the ISP network is configured with a /64 mechanism. The uplink to the ISP network is configured with a /64
prefix as well. prefix as well.
The GWR still receives a global IPv4 address on its upstream The GWR still receives a global IPv4 address on its upstream
interface using DHCPv4, which works the same way in currently interface using DHCPv4, which works the same way in currently
deployed cable networks. In order to get IPv6 connectivity to the deployed cable networks. In order to get IPv6 connectivity to the
Internet the GWR will need to communicate with the ER. Internet the GWR will need to communicate with the ER.
6.2.2.2.3 Data Forwarding 6.2.2.2.3 Data Forwarding
All IPv6 traffic will be sent to/from the ER and the GWR, which will All IPv6 traffic will be sent to/from the ER and the GWR, which will
forward IPv6 traffic to/from the host. In order to transport IPv6 forward IPv6 traffic to/from the host. In order to transport IPv6
packets over the cable operator IPv4 network, the GWR and the ER packets over the cable operator IPv4 network, the GWR and the ER will
will need to use one of the available IPv6 in IPv4 tunneling need to use one of the available IPv6 in IPv4 tunneling mechanisms.
mechanisms. All IPv6 traffic will need to go through the tunnel, once All IPv6 traffic will need to go through the tunnel, once it comes
it comes up. up.
The GWR will use its IPv4 address to source the tunnel to the ER. The GWR will use its IPv4 address to source the tunnel to the ER.
The tunnel endpoint will be the IPv4 address of the ER. All IPv6 The tunnel endpoint will be the IPv4 address of the ER. All IPv6
traffic will be forwarded to the ER, encapsulated in IPv4 packets. traffic will be forwarded to the ER, encapsulated in IPv4 packets.
The intermediate IPv4 nodes will forward this traffic as regular The intermediate IPv4 nodes will forward this traffic as regular IPv4
IPv4 packets. In case of 6to4 tunneling, the ER will need to support packets. In case of 6to4 tunneling, the ER will need to support 6to4
6to4 relay functionality in order to provide IPv6 Internet relay functionality in order to provide IPv6 Internet connectivity to
connectivity to the GWR and hence the hosts connected to the GWR. the GWR and hence the hosts connected to the GWR.
6.2.2.2.4 Routing 6.2.2.2.4 Routing
Depending on the tunneling technique used there might some Depending on the tunneling technique used there might some
configuration needed on the GWR and the ER. If the ER is also configuration needed on the GWR and the ER. If the ER is also
providing a 6to4 relay service then a default route will need to be providing a 6to4 relay service then a default route will need to be
added to the GWR pointing to the ER, for all non-6to4 traffic. added to the GWR pointing to the ER, for all non-6to4 traffic.
If using manual tunneling, the GWR and ER can use static routing or If using manual tunneling, the GWR and ER can use static routing or
they can also configure RIPng. The RIPng updates can be transported they can also configure RIPng. The RIPng updates can be transported
over a manual tunnel, which does not work when using 6to4 tunneling. over a manual tunnel, which does not work when using 6to4 tunneling.
Customer routes can be carried to the ER using RIPng updates. The ER Customer routes can be carried to the ER using RIPng updates. The ER
can advertise these routes in its IGP. Prefix summarization should be can advertise these routes in its IGP. Prefix summarization should
done at the ER. be done at the ER.
If DHCP-PD is used for address assignment a static route is If DHCP-PD is used for address assignment a static route is
automatically installed on the CMTS/ER for each delegated /48 prefix. automatically installed on the CMTS/ER for each delegated /48 prefix.
The static routes need to be redistributed into the IGP at the The static routes need to be redistributed into the IGP at the
CMTS/ER, so there is no need for a routing protocol between the CMTS/ER, so there is no need for a routing protocol between the
CMTS/ER and the GWR. CMTS/ER and the GWR.
The ER runs an IGP such as OSPFv3 or ISIS. The ER runs an IGP such as OSPFv3 or ISIS.
6.2.2.3 Dual-stacked Cable (HFC) Network, CM and CMTS Support IPv6 6.2.2.3 Dual-stacked Cable (HFC) Network, CM and CMTS Support IPv6
In this scenario the Cable Operator can offer native IPv6 services In this scenario the Cable Operator can offer native IPv6 services to
to its customers since the cable network including the CMTS supports its customers since the cable network including the CMTS supports
IPv6. The ER functionality can be included in the CMTS or it can IPv6. The ER functionality can be included in the CMTS or it can
exist on a separate router connected to the CMTS upstream interface. exist on a separate router connected to the CMTS upstream interface.
The CM will need to bridge IPv6 unicast and multicast traffic. The CM will need to bridge IPv6 unicast and multicast traffic.
Figure 6.2.2.3 illustrates this deployment scenario Figure 6.2.2.3 illustrates this deployment scenario
+-----------+ +-------------+ +-----------+ +-------------+
+-----+ +-------+ | Cable | | CMTS / Edge | +-----+ +-------+ | Cable | | CMTS / Edge |
|Host |--| CM |----| (HFC) |----| |=>ISP |Host |--| CM |----| (HFC) |----| |=>ISP
+-----+ +-------+ | Network | | Router | Network +-----+ +-------+ | Network | | Router | Network
+-----------+ +-------------+ +-----------+ +-------------+
<-------><----------------------------><----------------> |-------||----------------------------||----------------|
IPv4/v6 IPv4/v6 IPv4/v6 IPv4/v6 IPv4/v6 IPv4/v6
Figure 6.2.2.3 Figure 6.2.2.3
6.2.2.3.1 IPv6 Related Infrastructure Changes 6.2.2.3.1 IPv6 Related Infrastructure Changes
Since the CM still acts as a Layer-2 bridge, it does not need to Since the CM still acts as a Layer-2 bridge, it does not need to be
be dual-stack. The CM will need to support bridging of IPv6 unicast dual-stack. The CM will need to support bridging of IPv6 unicast and
and multicast traffic and IGMPv3/MLDv2 or v1 snooping which requires multicast traffic and IGMPv3/MLDv2 or v1 snooping which requires
changes in the DOCSIS specification. In this scenario the following changes in the DOCSIS specification. In this scenario the following
devices have to be upgraded to dual stack: Host and CMTS/ER. devices have to be upgraded to dual stack: Host and CMTS/ER.
6.2.2.3.2 Addressing 6.2.2.3.2 Addressing
In today's cable networks the CM receives a private IPv4 address In today's cable networks the CM receives a private IPv4 address
using DHCPv4 for management purposes. In an IPv6 environment, the using DHCPv4 for management purposes. In an IPv6 environment, the CM
CM will continue to use an IPv4 address for management purposes. will continue to use an IPv4 address for management purposes. The
The cable operator can also choose to assign an IPv6 address to the cable operator can also choose to assign an IPv6 address to the CM
CM for management, but the CM will have to be upgraded to support for management, but the CM will have to be upgraded to support this
this functionality. functionality.
IPv6 address assignment for the CM and host can be done via DHCP or IPv6 address assignment for the CM and host can be done via DHCP or
stateless autoconfiguration. If the CM uses an IPv4 address for stateless autoconfiguration. If the CM uses an IPv4 address for
management, it will use DHCPv4 for its address assignment and the management, it will use DHCPv4 for its address assignment and the
CMTS will need to act as a DHCPv4 relay agent. If the CM uses an IPv6 CMTS will need to act as a DHCPv4 relay agent. If the CM uses an
address for management, it can use DHCPv6 with the CMTS acting as a IPv6 address for management, it can use DHCPv6 with the CMTS acting
DHCPv6 relay agent or the CMTS can be statically configured with a as a DHCPv6 relay agent or the CMTS can be statically configured with
/64 prefix and it can send out RA messages out the cable interface. a /64 prefix and it can send out RA messages out the cable interface.
The CMs connected to the cable interface can use the RA messages to The CMs connected to the cable interface can use the RA messages to
auto-configure themselves with an IPv6 address. All CMs connected to auto-configure themselves with an IPv6 address. All CMs connected to
the cable interface will be in the same subnet. the cable interface will be in the same subnet.
The hosts can receive their IPv6 address via DHCPv6 or stateless The hosts can receive their IPv6 address via DHCPv6 or stateless
autoconfiguration. With DHCPv6, the CMTS may need to act as a DHCPv6 autoconfiguration. With DHCPv6, the CMTS may need to act as a DHCPv6
relay agent and forward DHCP messages between the hosts and the DHCP relay agent and forward DHCP messages between the hosts and the DHCP
server. With stateless autoconfiguration, the CMTS will be configured server. With stateless autoconfiguration, the CMTS will be
with multiple /64 prefixes and send out RA messages to the hosts. configured with multiple /64 prefixes and send out RA messages to the
If the CMTS is not also acting as an ER, the RA messages will come hosts. If the CMTS is not also acting as an ER, the RA messages will
from the ER connected to the CMTS upstream interface. The CMTS will come from the ER connected to the CMTS upstream interface. The CMTS
need to forward the RA messages downstream or act as an ND proxy. will need to forward the RA messages downstream or act as an ND
proxy.
6.2.2.3.3 Data Forwarding 6.2.2.3.3 Data Forwarding
All IPv6 traffic will be sent to/from the CMTS and hosts. Data All IPv6 traffic will be sent to/from the CMTS and hosts. Data
forwarding will work the same way it works in currently deployed forwarding will work the same way it works in currently deployed
cable networks. The CMTS will forward IPv6 traffic to/from hosts cable networks. The CMTS will forward IPv6 traffic to/from hosts
based on the IP source/destination address. based on the IP source/destination address.
6.2.2.3.4 Routing 6.2.2.3.4 Routing
No routing protocols are needed between the CMTS and the host No routing protocols are needed between the CMTS and the host since
since the CM and host are directly connected to the CMTS cable the CM and host are directly connected to the CMTS cable interface.
interface. Since the CMTS supports IPv6, hosts will use the CMTS Since the CMTS supports IPv6, hosts will use the CMTS as their Layer
as their Layer 3 next hop. 3 next hop.
If the CMTS is also acting as an ER, it runs an IGP such as OSPFv3 If the CMTS is also acting as an ER, it runs an IGP such as OSPFv3 or
or ISIS. ISIS.
6.2.2.4 Dual-Stacked Cable (HFC) Network, Standalone GWR and CMTS 6.2.2.4 Dual-Stacked Cable (HFC) Network, Standalone GWR and CMTS
Support IPv6 Support IPv6
In this case the cable operator can offer IPv6 services to its In this case the cable operator can offer IPv6 services to its
customers by adding a GWR between the CM and the host. The GWR will customers by adding a GWR between the CM and the host. The GWR will
facilitate IPv6 communication between the host and the CMTS/ER. The facilitate IPv6 communication between the host and the CMTS/ER. The
CMTS will be upgraded to dual-stack to support IPv6 and can acts as CMTS will be upgraded to dual-stack to support IPv6 and can acts as
an ER as well. The CM will act as a bridge for forwarding data an ER as well. The CM will act as a bridge for forwarding data
traffic and does not need to support IPv6. traffic and does not need to support IPv6.
skipping to change at page 20, line 6 skipping to change at page 23, line 13
facilitate IPv6 communication between the host and the CMTS/ER. The facilitate IPv6 communication between the host and the CMTS/ER. The
CMTS will be upgraded to dual-stack to support IPv6 and can acts as CMTS will be upgraded to dual-stack to support IPv6 and can acts as
an ER as well. The CM will act as a bridge for forwarding data an ER as well. The CM will act as a bridge for forwarding data
traffic and does not need to support IPv6. traffic and does not need to support IPv6.
This scenario is similar to the case described in section 6.2.2.2. This scenario is similar to the case described in section 6.2.2.2.
The only difference in this case is the ER functionality exists on The only difference in this case is the ER functionality exists on
the CMTS instead of a separate router in the cable operator network. the CMTS instead of a separate router in the cable operator network.
Figure 6.2.2.4 illustrates this deployment scenario Figure 6.2.2.4 illustrates this deployment scenario
+-----------+ +------------+ +-----------+ +------------+
+------+ +-------+ +-------+ | Cable | |CMTS / Edge | +------+ +-------+ +-------+ | Cable | |CMTS / Edge |
| Host |---| GWR |--| CM |---| (HFC) |----| |=>ISP | Host |---| GWR |--| CM |--| (HFC) |--| |=>ISP
+------+ +-------+ +-------+ | Network | | Router |Network +------+ +-------+ +-------+ | Network | | Router |Network
+-----------+ +------------+ +-----------+ +------------+
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
()_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _() ()_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _()
IPv6-in-IPv4 tunnel IPv6-in-IPv4 tunnel
<-----------------><--------------------------------><--------------> |-----------------||--------------------------------||--------------|
IPv4/v6 IPv4 IPv4/v6 IPv4/v6 IPv4 IPv4/v6
Figure 6.2.2.4 Figure 6.2.2.4
6.2.2.4.1 IPv6 Related Infrastructure Changes 6.2.2.4.1 IPv6 Related Infrastructure Changes
Since the CM still acts as a Layer-2 bridge, it does not need to Since the CM still acts as a Layer-2 bridge, it does not need to be
be dual-stack nor does it need to support IPv6. In this scenario dual-stack nor does it need to support IPv6. In this scenario the
the following devices have to be upgraded to dual stack: Host, GWR following devices have to be upgraded to dual stack: Host, GWR and
and CMTS/ER. CMTS/ER.
6.2.2.4.2 Addressing 6.2.2.4.2 Addressing
The CM will still receive a private IPv4 address using DHCPv4 which The CM will still receive a private IPv4 address using DHCPv4 which
works the same way in existent cable networks. The CMTS will act as works the same way in existent cable networks. The CMTS will act as
DHCPv4 relay agent. DHCPv4 relay agent.
The address assignment for the host and GWR happens in a similar The address assignment for the host and GWR happens in a similar
manner as described in section 6.2.2.2.2. manner as described in section 6.2.2.2.2.
6.2.2.4.3 Data Forwarding 6.2.2.4.3 Data Forwarding
Data forwarding between the host and CMTS/ER is facilitated by the Data forwarding between the host and CMTS/ER is facilitated by the
GWR and happens in a similar manner as described in section GWR and happens in a similar manner as described in section
6.2.2.2.3. 6.2.2.2.3.
6.2.2.4.4 Routing 6.2.2.4.4 Routing
In this case routing is very similar to the case described in In this case routing is very similar to the case described in section
section 6.2.2.2.4. Since the CMTS now incorporates the ER 6.2.2.2.4. Since the CMTS now incorporates the ER functionality, it
functionality, it will need to run an IGP such as OSPFv3 or ISIS. will need to run an IGP such as OSPFv3 or ISIS.
6.2.2.5 Dual-Stacked Cable (HFC) Network, Embedded GWR/CM and CMTS 6.2.2.5 Dual-Stacked Cable (HFC) Network, Embedded GWR/CM and CMTS
Support IPv6 Support IPv6
In this scenario the Cable Operator can offer native IPv6 services In this scenario the Cable Operator can offer native IPv6 services to
to its customers since the cable network including the CM/Embedded its customers since the cable network including the CM/Embedded GWR
GWR and CMTS support IPv6. The ER functionality can be included in and CMTS support IPv6. The ER functionality can be included in the
the CMTS or it can exist on a separate router connected to the CMTS CMTS or it can exist on a separate router connected to the CMTS
upstream interface. The CM/Embedded GWR acts as a Layer 3 device. upstream interface. The CM/Embedded GWR acts as a Layer 3 device.
Figure 6.2.2.5 illustrates this deployment scenario Figure 6.2.2.5 illustrates this deployment scenario
+-----------+ +-------------+ +-----------+ +-------------+
+-----+ +-----------+ | Cable | | CMTS / Edge | +-----+ +-----------+ | Cable | | CMTS / Edge |
|Host |---| CM / GWR |----| (HFC) |----| |=> ISP |Host |---| CM / GWR |----| (HFC) |----| |=> ISP
+-----+ +-----------+ | Network | | Router | Network +-----+ +-----------+ | Network | | Router | Network
+-----------+ +-------------+ +-----------+ +-------------+
<----------------------------------------------------------> |----------------------------------------------------------|
IPv4/v6 IPv4/v6
Figure 6.2.2.5 Figure 6.2.2.5
6.2.2.5.1 IPv6 Related Infrastructure Changes 6.2.2.5.1 IPv6 Related Infrastructure Changes
Since the CM/GWR acts as a Layer 3 device, IPv6 can be deployed Since the CM/GWR acts as a Layer 3 device, IPv6 can be deployed end-
end-to-end. In this scenario the following devices have to be to-end. In this scenario the following devices have to be upgraded
upgraded to dual-stack: Host, CM/GWR and CMTS/ER. to dual-stack: Host, CM/GWR and CMTS/ER.
6.2.2.5.2 Addressing 6.2.2.5.2 Addressing
Since the CM/GWR is dual-stack, it can receive an IPv4 or IPv6 Since the CM/GWR is dual-stack, it can receive an IPv4 or IPv6
address using DHCP for management purposes. As the GWR functionality address using DHCP for management purposes. As the GWR functionality
is Embedded in the CM, it will need an IPv6 address for forwarding is Embedded in the CM, it will need an IPv6 address for forwarding
data traffic. IPv6 address assignment for the CM/GWR and host can be data traffic. IPv6 address assignment for the CM/GWR and host can be
done via DHCPv6 or DHCP-PD. done via DHCPv6 or DHCP-PD.
If using DHCPv6 the CMTS will need to act as DHCPv6 relay agent. The If using DHCPv6 the CMTS will need to act as DHCPv6 relay agent. The
host and CM/GWR will receive IPv6 addresses from pools of /64 host and CM/GWR will receive IPv6 addresses from pools of /64
prefixes configured on the DHCPv6 server. The CMTS will need to glean prefixes configured on the DHCPv6 server. The CMTS will need to
pertinent information from the DHCP Offer messages, sent from the glean pertinent information from the DHCP Offer messages, sent from
DHCP server to the DHCP clients (host and CM/GWR), much like it does the DHCP server to the DHCP clients (host and CM/GWR), much like it
today in DHCPv4. All CM/GWR connected to the same cable interface on does today in DHCPv4. All CM/GWR connected to the same cable
the CMTS belong to same management /64 prefix. The hosts connected interface on the CMTS belong to same management /64 prefix. The
to the same cable interface on the CMTS may belong to different /64 hosts connected to the same cable interface on the CMTS may belong to
customer prefixes as the CMTS may have multiple /64 prefixes different /64 customer prefixes as the CMTS may have multiple /64
configured under its cable interfaces. prefixes configured under its cable interfaces.
It is also possible to use DHCP-PD for IPv6 address assignment. In It is also possible to use DHCP-PD for IPv6 address assignment. In
this case the CM/GWR will use stateless auto-configuration to assign this case the CM/GWR will use stateless auto-configuration to assign
an IPv6 address to its upstream interface using the /64 prefix an IPv6 address to its upstream interface using the /64 prefix sent
sent by the CMTS/ER in RA message. Once the CM/GWR assigns an IPv6 by the CMTS/ER in RA message. Once the CM/GWR assigns an IPv6
address to its upstream interface it will request a /48 prefix from address to its upstream interface it will request a /48 [8] prefix
the CMTS/ER and chop this /48 prefix into /64s for assigning IPv6 from the CMTS/ER and chop this /48 prefix into /64s for assigning
addresses to hosts. Currently the DHCP-PD functionality cannot be IPv6 addresses to hosts. Currently the DHCP-PD functionality cannot
implemented if the DHCP-PD server is not the Edge Router. If the be implemented if the DHCP-PD server is not the Edge Router. If the
DHCP-PD messages are relayed, the Edge Router does not have a DHCP-PD messages are relayed, the Edge Router does not have a
mechanism to learn the assigned prefixes and thus install the proper mechanism to learn the assigned prefixes and thus install the proper
routes to make that prefix reachable. Work is being done to address routes to make that prefix reachable. Work is being done to address
this issue, one idea being to provide the Edge Router with a snooping this issue, one idea being to provide the Edge Router with a snooping
mechanism. The uplink to the ISP network is configured with a /64 mechanism. The uplink to the ISP network is configured with a /64
prefix as well. prefix as well.
6.2.2.5.3 Data Forwarding 6.2.2.5.3 Data Forwarding
The host will use the CM/GWR as the Layer 3 next hop. The CM/GWR The host will use the CM/GWR as the Layer 3 next hop. The CM/GWR
skipping to change at page 22, line 26 skipping to change at page 25, line 46
it can run a routing protocol such as RIP-ng or OSPFv3 between itself it can run a routing protocol such as RIP-ng or OSPFv3 between itself
and the CMTS. Customer routes from behind the CM/GWR can be carried and the CMTS. Customer routes from behind the CM/GWR can be carried
to the CMTS using routing updates. to the CMTS using routing updates.
If DHCP-PD is used for address assignment a static route is If DHCP-PD is used for address assignment a static route is
automatically installed on the CMTS/ER for each delegated /48 prefix. automatically installed on the CMTS/ER for each delegated /48 prefix.
The static routes need to be redistributed into the IGP at the The static routes need to be redistributed into the IGP at the
CMTS/ER so there is no need for a routing protocol between the CMTS/ER so there is no need for a routing protocol between the
CMTS/ER and the GWR. CMTS/ER and the GWR.
If the CMTS is also acting as an ER, it runs an IGP such as OSPFv3 If the CMTS is also acting as an ER, it runs an IGP such as OSPFv3 or
or ISIS. ISIS.
6.3 IPv6 Multicast 6.2.3 IPv6 Multicast
In order to support IPv6 multicast applications across DOCSIS cable In order to support IPv6 multicast applications across DOCSIS cable
networks, the CM and bridging CMTS will need to support IGMPv3/MLDv2 networks, the CM and bridging CMTS will need to support IGMPv3/MLDv2
or v1 snooping. MLD is almost identical to IGMP in IPv4, only the or v1 snooping. MLD is almost identical to IGMP in IPv4, only the
name and numbers are changed. MLDv2 is almost identical to IGMPv3 name and numbers are changed. MLDv2 is almost identical to IGMPv3
and also supports ASM (Any Source Multicast) and SSM (Single Source and also supports ASM (Any Source Multicast) and SSM (Single Source
Multicast) service models. Multicast) service models.
SSM is more suited for deployments where the SP intends to provide SSM is more suited for deployments where the SP intends to provide
paid content to the users (Video or Audio). This type of services paid content to the users (Video or Audio). This type of services
are expected to be of primary interest. Moreover, the simplicity of are expected to be of primary interest. Moreover, the simplicity of
the SSM model often times override the scalability issues that would the SSM model often times override the scalability issues that would
be resolved in an ASM model. ASM is however an option that is be resolved in an ASM model. ASM is however an option that is
discussed in section 7.3.1. The Layer 3 CM, GWR and discussed in section 7.3.1. The Layer 3 CM, GWR and Layer 3 routed
Layer 3 routed CMTS/ER will need to be enabled with PIM-SSM, which CMTS/ER will need to be enabled with PIM-SSM, which requires the
requires the definition and support for IGMPv3/MLDv1 or v2 snooping, definition and support for IGMPv3/MLDv1 or v2 snooping, in order to
in order to track join/leave messages from the hosts. Another option track join/leave messages from the hosts. Another option would be
would be for the Layer 3 CM or GWR to support MLD proxy routing. The for the Layer 3 CM or GWR to support MLD proxy routing. The Layer 3
Layer 3 next hop for the hosts needs to support MLD. next hop for the hosts needs to support MLD.
Please refer to section 7.3 for more IPv6 multicast details. Please refer to section 7.3 for more IPv6 multicast details.
6.4 IPv6 QoS 6.2.4 IPv6 QoS
IPv6 will not change or add any queuing/scheduling functionality IPv6 will not change or add any queuing/scheduling functionality
already existing in DOCSIS specifications. But the QoS mechanisms on already existing in DOCSIS specifications. But the QoS mechanisms on
the CMTS and CM would need to be IPv6 capable. This includes support the CMTS and CM would need to be IPv6 capable. This includes support
for IPv6 classifiers, so that data traffic to/from host devices can for IPv6 classifiers, so that data traffic to/from host devices can
be classified appropriately into different service flows and be be classified appropriately into different service flows and be
assigned appropriate priority. Appropriate classification criteria assigned appropriate priority. Appropriate classification criteria
would need to be implemented for unicast and multicast traffic. would need to be implemented for unicast and multicast traffic.
In order to classify IPv6 traffic the following classifiers would In order to classify IPv6 traffic the following classifiers would
need to be modified in the DOCSIS specification to support the need to be modified in the DOCSIS specification to support the 128-
128-bit IPv6 address: bit IPv6 address:
A. IP source address A. IP source address
B. IP source mask B. IP source mask
C. IP destination address C. IP destination address
D. IP destination mask D. IP destination mask
E. IP traffic class (DSCP) E. IP traffic class (DSCP)
The following classifiers would be new for IPv6: The following classifiers would be new for IPv6:
A. IP version A. IP version
B. Flow label (optional) B. Flow label (optional)
Traffic classification and marking should be done at the CM for Traffic classification and marking should be done at the CM for
upstream traffic and the CMTS/ER for downstream traffic in order to upstream traffic and the CMTS/ER for downstream traffic in order to
support the various types of services: data, voice, video. The same support the various types of services: data, voice, video. The same
skipping to change at page 23, line 37 skipping to change at page 27, line 19
IPv4 QoS concepts and methodologies should be applied for IPv6 as IPv4 QoS concepts and methodologies should be applied for IPv6 as
well. well.
It is important to note that when traffic is encrypted end-to-end, It is important to note that when traffic is encrypted end-to-end,
the traversed network devices will not have access to many of the the traversed network devices will not have access to many of the
packet fields used for classification purposes. In these cases packet fields used for classification purposes. In these cases
routers will most likely place the packets in the default classes. routers will most likely place the packets in the default classes.
The QoS design should take into consideration this scenario and try The QoS design should take into consideration this scenario and try
to use mainly IP header fields for classification purposes. to use mainly IP header fields for classification purposes.
6.5 IPv6 Security Considerations 6.2.5 IPv6 Security Considerations
Security in a DOCSIS cable network is provided using Baseline Privacy Security in a DOCSIS cable network is provided using Baseline Privacy
Plus (BPI+). The only part that is dependent on IP addresses is Plus (BPI+). The only part that is dependent on IP addresses is
encrypted multicast. Semantically, multicast encryption would work encrypted multicast. Semantically, multicast encryption would work
the same way in an IPv6 environment as in the IPv4 network. However, the same way in an IPv6 environment as in the IPv4 network. However,
appropriate enhancements will be needed in the DOCSIS specification appropriate enhancements will be needed in the DOCSIS specification
to support encrypted IPv6 multicast. to support encrypted IPv6 multicast.
The other aspect of security enhancement is mandated IPSec support The other aspect of security enhancement is mandated IPSec support in
in IPv6. The IPv6 specifications mandate implementation of IPSec, IPv6. The IPv6 specifications mandate implementation of IPSec, but
but they do not mandate its use. The IPv4 specifications do not they do not mandate its use. The IPv4 specifications do not mandate
mandate IPSec. IPSec is the same for both IPv4 and IPv6, but it IPSec. IPSec is the same for both IPv4 and IPv6, but it still
still requires a key distribution mechanism. Cable operators may requires a key distribution mechanism. Cable operators may consider
consider deploying it end-to-end on IPv6 as there is not an deploying it end-to-end on IPv6 as there is not an intermediate
intermediate device(i.e. NAT). device(i.e. NAT).
There are limited changes that have to be done for hosts in order to There are limited changes that have to be done for hosts in order to
enhance security. The Privacy extensions [RFC3041] for enhance security. The Privacy extensions [14] for autoconfiguration
autoconfiguration should be used by the hosts. IPv6 firewall should be used by the hosts. IPv6 firewall functions could be
functions could be enabled, if available on the host or GWR. enabled, if available on the host or GWR.
The ISP provides security against attacks that come form its own The ISP provides security against attacks that come form its own
subscribers but it could also implement security services that subscribers but it could also implement security services that
protect its subscribers from attacks sourced from the outside of its protect its subscribers from attacks sourced from the outside of its
network. Such services do not apply at the access level of the network. Such services do not apply at the access level of the
network discussed here. network discussed here.
The CMTS/ER should protect the ISP network and the other subscribers The CMTS/ER should protect the ISP network and the other subscribers
against attacks by one of its own customers. For this reason Unicast against attacks by one of its own customers. For this reason Unicast
Reverse Path Forwarding (uRPF) [RFC3704] and ACLs should be used on Reverse Path Forwarding (uRPF) [23] and ACLs should be used on all
all interfaces facing subscribers. Filtering should be implemented interfaces facing subscribers. Filtering should be implemented with
with regard for the operational requirements of IPv6 [Security regard for the operational requirements of IPv6 [Security
considerations for IPv6]. considerations for IPv6].
The CMTS/ER should protect its processing resources against floods of The CMTS/ER should protect its processing resources against floods of
valid customer control traffic such as: Router and Neighbor valid customer control traffic such as: Router and Neighbor
Solicitations, MLD Requests. Solicitations, MLD Requests.
All other security features used with the IPv4 service should be All other security features used with the IPv4 service should be
similarly applied to IPv6 as well. similarly applied to IPv6 as well.
6.6 IPv6 Network Management 6.2.6 IPv6 Network Management
IPv6 can have many applications in Cable Networks. MSOs can initially IPv6 can have many applications in Cable Networks. MSOs can
implement IPv6 on the control plane and use it to manage the initially implement IPv6 on the control plane and use it to manage
thousands of devices connected to the CMTS. This would be a good way the thousands of devices connected to the CMTS. This would be a good
to introduce IPv6 in a Cable Network. Later on the MSO can extend way to introduce IPv6 in a Cable Network. Later on the MSO can
IPv6 to the data plane and use it to carry customer as well as extend IPv6 to the data plane and use it to carry customer as well as
management traffic. management traffic.
6.6.1 Using IPv6 for Management in Cable Networks 6.2.6.1 Using IPv6 for Management in Cable Networks
IPv6 can be enabled in a Cable Network for management of devices like IPv6 can be enabled in a Cable Network for management of devices like
CM, CMTS and ER. With the roll out of advanced services like VoIP and CM, CMTS and ER. With the roll out of advanced services like VoIP
Video-over-IP, MSOs are looking for ways to manage the large number and Video-over-IP, MSOs are looking for ways to manage the large
of devices connected to the CMTS. In IPv4, an RFC1918 address is number of devices connected to the CMTS. In IPv4, an RFC1918 address
assigned to these devices like CM for management purposes. Since is assigned to these devices like CM for management purposes. Since
there is a finite number of RFC1918 addresses available, it is there is a finite number of RFC1918 addresses available, it is
becoming difficult for MSOs to manage these devices. becoming difficult for MSOs to manage these devices.
By using IPv6 for management purposes, MSOs can scale their network By using IPv6 for management purposes, MSOs can scale their network
management systems to meet their needs. The CMTS/ER can be management systems to meet their needs. The CMTS/ER can be
configured with a /64 management prefix which is shared among all configured with a /64 management prefix which is shared among all CMs
CMs connected to the CMTS cable interface. Addressing for the CMs connected to the CMTS cable interface. Addressing for the CMs can be
can be done via stateless autoconfiguration. Once the CMs receive done via stateless autoconfiguration. Once the CMs receive the /64
the /64 prefix from the CMTS/ER via RA they can configure themselves prefix from the CMTS/ER via RA they can configure themselves with an
with an IPv6 address. IPv6 address.
If there are devices behind the CM which need to be managed by the If there are devices behind the CM which need to be managed by the
MSO, another /64 prefix can be defined on the CMTS/ER. These devices MSO, another /64 prefix can be defined on the CMTS/ER. These devices
can also use stateless autoconfiguration to assign themselves an IPv6 can also use stateless autoconfiguration to assign themselves an IPv6
address. address.
Traffic sourced from or destined to the management prefix should not Traffic sourced from or destined to the management prefix should not
cross the MSO's network boundaries. cross the MSO's network boundaries.
In this scenario IPv6 will only be used for managing these devices In this scenario IPv6 will only be used for managing these devices on
on the Cable Network, all data traffic will still be forwarded by the Cable Network, all data traffic will still be forwarded by the CM
the CM and CMTS/ER using IPv4. and CMTS/ER using IPv4.
6.6.2 Updates to MIBs/Standards to support IPv6 6.2.6.2 Updates to MIBs/Standards to support IPv6
The current DOCSIS, PacketCable, and CableHome MIBs are already The current DOCSIS, PacketCable, and CableHome MIBs are already
designed to support IPv6 objects. In this case, IPv6 will neither designed to support IPv6 objects. In this case, IPv6 will neither
add, nor change any of the functionality of these MIBs. An object to add, nor change any of the functionality of these MIBs. An object to
identify the IP version, InetAddressType has been added to all the identify the IP version, InetAddressType has been added to all the
appropriate SNMP objects related to IP address. appropriate SNMP objects related to IP address.
There are some exceptions, the following MIBs might need to add IPv6 There are some exceptions, the following MIBs might need to add IPv6
support: support:
skipping to change at page 25, line 26 skipping to change at page 29, line 19
add, nor change any of the functionality of these MIBs. An object to add, nor change any of the functionality of these MIBs. An object to
identify the IP version, InetAddressType has been added to all the identify the IP version, InetAddressType has been added to all the
appropriate SNMP objects related to IP address. appropriate SNMP objects related to IP address.
There are some exceptions, the following MIBs might need to add IPv6 There are some exceptions, the following MIBs might need to add IPv6
support: support:
On the CMTS On the CMTS
A. DOCS-QOS-MIB A. DOCS-QOS-MIB
B. DOCS-SUBMGT-MIB (Subscriber Management Interface Specification B. DOCS-SUBMGT-MIB (Subscriber Management Interface Specification
ANNEX B) ANNEX B)
On the CM On the CM
A. DOCS-QOS-MIB A. DOCS-QOS-MIB
B. DOCS-CABLE-DEVICE-MIB (or RFC2669)
B. DOCS-CABLE-DEVICE-MIB (or [20])
7. Broadband DSL Networks 7. Broadband DSL Networks
This section describes the IPv6 deployment options in today's This section describes the IPv6 deployment options in today's High
High Speed DSL Networks. Speed DSL Networks.
7.1 DSL Network Elements 7.1 DSL Network Elements
Digital Subscriber Line (DSL) broadband services provide users Digital Subscriber Line (DSL) broadband services provide users with
with IP connectivity over the existing twisted-pair telephone lines IP connectivity over the existing twisted-pair telephone lines called
called the local-loop. A wide range of bandwidth offerings are the local-loop. A wide range of bandwidth offerings are available
available depending on the quality of the line and the distance depending on the quality of the line and the distance between the
between the Customer Premises Equipment and the DSLAM. Customer Premises Equipment and the DSLAM.
The following network elements are typical of a DSL network [ISP The following network elements are typical of a DSL network [ISP
Transition Scenarios]: Transition Scenarios]:
DSL Modem: It can be a stand alone device, it can be incorporated DSL Modem: It can be a stand alone device, it can be incorporated in
in the host, it can incorporate router functionalities and also the host, it can incorporate router functionalities and also have the
have the capabilities to act as a CPE router. capabilities to act as a CPE router.
Customer Premises Router: It is used to provide Layer 3 services Customer Premises Router: It is used to provide Layer 3 services for
for customer premises networks. It is usually used to provide customer premises networks. It is usually used to provide
firewalling functions and segment broadcast domains for a Small firewalling functions and segment broadcast domains for a Small
business. business.
DSL Access Multiplexer (DSLAM): It terminates multiple twisted DSL Access Multiplexer (DSLAM): It terminates multiple twisted pair
pair telephone lines and provides aggregation to BRAS. telephone lines and provides aggregation to BRAS.
Broadband Remote Access Server (BRAS): It aggregates or terminates Broadband Remote Access Server (BRAS): It aggregates or terminates
multiple PVC corresponding to the subscriber DSL circuits. multiple PVC corresponding to the subscriber DSL circuits.
Edge Router (ER): It provides the Layer 3 interface to the ISP Edge Router (ER): It provides the Layer 3 interface to the ISP
network. network.
Figure 7.1 depicts all the network elements mentioned. Figure 7.1 depicts all the network elements mentioned
Customer Premises | Network Access Provider | Network Service Provider Customer Premises | Network Access Provider | Network Service Provider
CP NAP NSP CP NAP NSP
+-----+ +------+ +------+ +--------+ +-----+ +------+ +------+ +--------+
|Hosts|--|Router| +--+ BRAS +---+ Edge | ISP |Hosts|--|Router| +--+ BRAS +---+ Edge | ISP
+-----+ +--+---+ | | | | Router +===> Network +-----+ +--+---+ | | | | Router +===> Network
| | +------+ +--------+ | | +------+ +--------+
+--+---+ | +--+---+ |
| DSL +--+ | | DSL +--+ |
|Modem | | | |Modem | | |
+------+ | +-----+ | +------+ | +-----+ |
+--+ | | +--+ | |
+------+ |DSLAM+--+ +------+ |DSLAM+--+
skipping to change at page 26, line 33 skipping to change at page 30, line 31
| | +------+ +--------+ | | +------+ +--------+
+--+---+ | +--+---+ |
| DSL +--+ | | DSL +--+ |
|Modem | | | |Modem | | |
+------+ | +-----+ | +------+ | +-----+ |
+--+ | | +--+ | |
+------+ |DSLAM+--+ +------+ |DSLAM+--+
+-----+ | DSL | +--+ | +-----+ | DSL | +--+ |
|Hosts|--+Modem +--+ +-----+ |Hosts|--+Modem +--+ +-----+
+-----+ +--+---+ +-----+ +--+---+
Figure 7.1 Figure 7.1
7.2 Deploying IPv6 in IPv4 DSL Networks 7.2 Deploying IPv6 in IPv4 DSL Networks
There are three main design approaches to providing IPv4 connectivity There are three main design approaches to providing IPv4 connectivity
over a DSL infrastructure: over a DSL infrastructure:
1. Point-to-Point Model: Each subscriber connects to the DSLAM 1. Point-to-Point Model: Each subscriber connects to the DSLAM over
over a twisted pair and is provided with a unique PVC that links it a twisted pair and is provided with a unique PVC that links it to the
to the service provider. The PVCs can be terminated at the BRAS or service provider. The PVCs can be terminated at the BRAS or at the
at the Edge Router. This type of design is not very scalable if the Edge Router. This type of design is not very scalable if the PVCs
PVCs are not terminated as close as possible to the DSLAM (at the are not terminated as close as possible to the DSLAM (at the BRAS).
BRAS). In this case a large number of layer two circuits has to be In this case a large number of layer two circuits has to be
maintained over a significant portion of the network. The layer two maintained over a significant portion of the network. The layer two
domains can be terminated at the ER in three ways: domains can be terminated at the ER in three ways:
A. In a common bridge group with a virtual interface that routes it A. In a common bridge group with a virtual interface that routes it
out. out.
B. Enable a Routed Bridged Encapsulation feature, all users could be B. Enable a Routed Bridged Encapsulation feature, all users could be
part of the same subnet. This is the most common deployment type of part of the same subnet. This is the most common deployment type of
IPv4 over DSL but it might not be the best choice in IPv6 where IPv4 over DSL but it might not be the best choice in IPv6 where
address availability is not an issue. address availability is not an issue.
C. Terminate the PVC at Layer 3, each PVC has its own prefix. This is C. Terminate the PVC at Layer 3, each PVC has its own prefix. This
the approach that seems more suitable for IPv6 and presented in 7.2.1 is the approach that seems more suitable for IPv6 and presented in
In none of these cases the CPE (DSL Modem) has to be upgraded. 7.2.1 In none of these cases the CPE (DSL Modem) has to be upgraded.
2. PPP Terminated Aggregation (PTA) Model: PPP sessions are opened 2. PPP Terminated Aggregation (PTA) Model: PPP sessions are opened
between each subscriber and the BRAS. The BRAS terminates the PPP between each subscriber and the BRAS. The BRAS terminates the PPP
sessions and provides Layer 3 connectivity between the subscriber sessions and provides Layer 3 connectivity between the subscriber and
and the ISP. This model is presented in section 7.2.2. the ISP. This model is presented in section 7.2.2.
3. L2TP Access Aggregation (LAA) Model: PPP sessions are opened 3. L2TP Access Aggregation (LAA) Model: PPP sessions are opened
between each subscriber and the ISP Edge Router. The BRAS tunnels the between each subscriber and the ISP Edge Router. The BRAS tunnels
subscriber PPP sessions to the ISP by encapsulating them into L2TPv2 the subscriber PPP sessions to the ISP by encapsulating them into
tunnels. This model is presented in section 7.2.3. L2TPv2 tunnels. This model is presented in section 7.2.3.
In aggregation models the BRAS terminates the subscriber PVCs and In aggregation models the BRAS terminates the subscriber PVCs and
aggregates their connections before providing access to the ISP. aggregates their connections before providing access to the ISP.
In order to maintain the deployment concepts and business models In order to maintain the deployment concepts and business models
proven and used with existent revenue generating IPv4 services, the proven and used with existent revenue generating IPv4 services, the
IPv6 deployment will match the IPv4 one. This approach is presented IPv6 deployment will match the IPv4 one. This approach is presented
in sections 7.2.1-3 that describe current IPv4 over DSL broadband in sections 7.2.1-3 that describe current IPv4 over DSL broadband
access deployments. Under certain circumstances where new service access deployments. Under certain circumstances where new service
types or service needs justify it, IPv4 and IPv6 network logical types or service needs justify it, IPv4 and IPv6 network logical
architectures could be different as described in section 7.2.4. architectures could be different as described in section 7.2.4.
7.2.1 Point-to-Point Model 7.2.1 Point-to-Point Model
In this scenario the Ethernet frames from the Host or the Customer In this scenario the Ethernet frames from the Host or the Customer
Premises Router are bridged over the PVC assigned to the subscriber. Premises Router are bridged over the PVC assigned to the subscriber.
Figure 7.2.1 describes the protocol architecture of this model. Figure 7.2.1 describes the protocol architecture of this model
Customer Premises NAP NSP Customer Premises NAP NSP
<-------------------------> <---------------> <--------------------> |-------------------------| |---------------| |--------------------|
+-----+ +-------+ +-----+ +--------+ +----------+ +-----+ +-------+ +-----+ +--------+ +----------+
|Hosts|--+Router +--+ DSL +--+ DSLAM +--------+ Edge | ISP |Hosts|--+Router +--+ DSL +--+ DSLAM +--------+ Edge | ISP
+-----+ +-------+ |Modem| +--------+ | Router +==> Network +-----+ +-------+ |Modem| +--------+ | Router +==> Network
+-----+ +----------+ +-----+ +----------+
<----------------------------> |----------------------------|
ATM ATM
Figure 7.2.1 Figure 7.2.1
7.2.1.1 IPv6 Related Infrastructure Changes 7.2.1.1 IPv6 Related Infrastructure Changes
In this scenario the DSL modem and the entire NAP is Layer 3 unaware, In this scenario the DSL modem and the entire NAP is Layer 3 unaware,
so no changes are needed to support IPv6. The following devices have so no changes are needed to support IPv6. The following devices have
to be upgraded to dual stack: Host, Customer Router (if present) and to be upgraded to dual stack: Host, Customer Router (if present) and
Edge Router. Edge Router.
skipping to change at page 28, line 24 skipping to change at page 32, line 30
autoconfiguration or stateful DHCPv6 based configuration to acquire autoconfiguration or stateful DHCPv6 based configuration to acquire
an address via the Edge Router. an address via the Edge Router.
If a Customer Router is present: If a Customer Router is present:
A. It is statically configured with an address on the /64 subnet A. It is statically configured with an address on the /64 subnet
between itself and the Edge Router, and with /64 prefixes on the between itself and the Edge Router, and with /64 prefixes on the
interfaces connecting the hosts on the customer site. This is not a interfaces connecting the hosts on the customer site. This is not a
desired provisioning method being expensive and difficult to manage. desired provisioning method being expensive and difficult to manage.
B. It can use its link-local address to communicate with the ER. B. It can use its link-local address to communicate with the ER. It
It can also dynamically acquire through stateless autoconfiguration can also dynamically acquire through stateless autoconfiguration the
the prefix for the link between itself and the ER. The later option prefix for the link between itself and the ER. The later option
allows it to contact a remote DHCPv6 server if needed. This step is allows it to contact a remote DHCPv6 server if needed. This step is
followed by a request via DHCP-PD for a prefix shorter than /64 followed by a request via DHCP-PD for a prefix shorter than /64 that
that in turn is divided in /64s and assigned to its downstream in turn is divided in /64s and assigned to its downstream interfaces.
interfaces.
The Edge Router has a /64 prefix configured for each subscriber VLAN. The Edge Router has a /64 prefix configured for each subscriber VLAN.
Each VLAN should be enabled to relay DHCPv6 requests from the Each VLAN should be enabled to relay DHCPv6 requests from the
subscribers to DHCPv6 servers in the ISP network. The VLANs providing subscribers to DHCPv6 servers in the ISP network. The VLANs
access for subscribers that use DHCP-PD as well, have to be enabled providing access for subscribers that use DHCP-PD as well, have to be
to support the feature. Currently the DHCP-PD functionality cannot be enabled to support the feature. Currently the DHCP-PD functionality
implemented if the DHCP-PD server is not the Edge Router. If the cannot be implemented if the DHCP-PD server is not the Edge Router.
DHCP-PD messages are relayed, the Edge Router does not have a If the DHCP-PD messages are relayed, the Edge Router does not have a
mechanism to learn the assigned prefixes and thus install the proper mechanism to learn the assigned prefixes and thus install the proper
routes to make that prefix reachable. Work is being done to address routes to make that prefix reachable. Work is being done to address
this issue, one idea being to provide the Edge Router with a snooping this issue, one idea being to provide the Edge Router with a snooping
mechanism. The uplink to the ISP network is configured with a /64 mechanism. The uplink to the ISP network is configured with a /64
prefix as well. prefix as well.
The prefixes used for subscriber links and the ones delegated via The prefixes used for subscriber links and the ones delegated via
DHCP-PD should be planned in a manner that allows as much DHCP-PD should be planned in a manner that allows as much
summarization as possible at the Edge Router. summarization as possible at the Edge Router.
Other information of interest to the host, such as DNS, is provided Other information of interest to the host, such as DNS, is provided
through stateful DHCPv6 [RFC3315] and stateless DHCPv6 [RFC3736]. through stateful DHCPv6 [11] and stateless DHCPv6 [10].
7.2.1.3 Routing 7.2.1.3 Routing
The CPE devices are configured with a default route that points to The CPE devices are configured with a default route that points to
the Edge router. No routing protocols are needed on these devices the Edge router. No routing protocols are needed on these devices
which generally have limited resources. which generally have limited resources.
The Edge Router runs the IPv6 IGP used in the NSP: OSPFv3 or IS-IS. The Edge Router runs the IPv6 IGP used in the NSP: OSPFv3 or IS-IS.
The connected prefixes have to be redistributed. If DHCP-PD is used, The connected prefixes have to be redistributed. If DHCP-PD is used,
with every delegated prefix a static route is installed by the Edge with every delegated prefix a static route is installed by the Edge
Router. For this reason the static routes must also be redistributed. Router. For this reason the static routes must also be
Prefix summarization should be done at the Edge Router. redistributed. Prefix summarization should be done at the Edge
Router.
7.2.2 PPP Terminated Aggregation (PTA) Model 7.2.2 PPP Terminated Aggregation (PTA) Model
The PTA architecture relies on PPP-based protocols (PPPoA [RFC2364] The PTA architecture relies on PPP-based protocols (PPPoA [16] and
and PPPoE [RFC2516]). The PPP sessions are initiated by Customer PPPoE [15]). The PPP sessions are initiated by Customer Premise
Premise Equipment and are terminated at the BRAS. The BRAS Equipment and are terminated at the BRAS. The BRAS authorizes the
authorizes the session, authenticates the subscriber, and provides session, authenticates the subscriber, and provides an IP address on
an IP address on behalf of the ISP. The BRAS then does Layer 3 behalf of the ISP. The BRAS then does Layer 3 routing of the
routing of the subscriber traffic to the NSP Edge Router. This model subscriber traffic to the NSP Edge Router. This model is often used
is often used when the NSP is also the NAP. when the NSP is also the NAP.
There are two types of PPP encapsulations that can be leveraged with There are two types of PPP encapsulations that can be leveraged with
this model: this model:
A. Connection using PPPoA A. Connection using PPPoA
Customer Premises NAP NSP Customer Premises NAP NSP
<--------------------> <----------------------> <-----------------> |--------------------| |----------------------| |-----------------|
+-----------+ +-----------+
| AAA | | AAA |
+-------+ Radius | +-------+ Radius |
| | TACACS | | | TACACS |
| +-----------+ | +-----------+
| |
+-----+ +-------+ +--------+ +----+-----+ +-----------+ +-----+ +-------+ +--------+ +----+-----+ +-----------+
|Hosts|--+Router +------+ DSLAM +-+ BRAS +-+ Edge | |Hosts|--+Router +------+ DSLAM +-+ BRAS +-+ Edge |
+-----+ +-------+ +--------+ +----------+ | Router +=>Core +-----+ +-------+ +--------+ +----------+ | Router +=>Core
+-----------+ +-----------+
<--------------------------> |--------------------------|
PPP PPP
Figure 7.2.2.1 Figure 7.2.2.1
The PPP sessions are initiated by the Customer Premise Equipment.
The PPP sessions are initiated by the Customer Premise Equipment. The The BRAS authenticates the subscriber against a local or a remote
BRAS authenticates the subscriber against a local or a remote
database. Once the session is established, the BRAS provides an database. Once the session is established, the BRAS provides an
address and maybe a DNS server to the user, information acquired from address and maybe a DNS server to the user, information acquired from
the subscriber profile or from a DHCP server. the subscriber profile or from a DHCP server.
This solution scales better then the Point-to-Point but since there This solution scales better then the Point-to-Point but since there
is only one PPP session per ATM PVC the subscriber can choose a is only one PPP session per ATM PVC the subscriber can choose a
single ISP service at a time. single ISP service at a time.
B. Connection using PPPoE B. Connection using PPPoE
Customer Premises NAP NSP Customer Premises NAP NSP
<----------------------------> <-------------------> <-----------------> |--------------------------| |-------------------| |--------------|
+-----------+ +-----------+
| AAA | | AAA |
+-------+ Radius | +-------+ Radius |
| | TACACS | | | TACACS |
| +-----------+ | +-----------+
| |
+-----+ +-------+ +--------+ +----+-----+ +-----------+ +-----+ +-------+ +--------+ +----+-----+ +-----------+
|Hosts|--+Router +------------+ DSLAM +-+ BRAS +-+ Edge | C |Hosts|--+Router +----------+ DSLAM +-+ BRAS +-+ Edge | C
+-----+ +-------+ +--------+ +----------+ | Router +=>O +-----+ +-------+ +--------+ +----------+ | Router +=>O
| | R | | R
+-----------+ E +-----------+ E
<--------------------------------> |-------------------------------|
PPP PPP
Figure 7.2.2.2 Figure 7.2.2.2
The operation of PPPoE is similar to PPPoA with the exception that The operation of PPPoE is similar to PPPoA with the exception that
with PPPoE multiple sessions can be supported over the same PVC thus with PPPoE multiple sessions can be supported over the same PVC thus
allowing the subscriber to connect to multiple services at the same allowing the subscriber to connect to multiple services at the same
time. The hosts can initiate the PPPoE sessions as well. It is time. The hosts can initiate the PPPoE sessions as well. It is
important to remember that the PPPoE encapsulation reduces the IP important to remember that the PPPoE encapsulation reduces the IP MTU
MTU available for the customer traffic due to additional headers. available for the customer traffic due to additional headers.
The network design and operation of the PTA model is the same The network design and operation of the PTA model is the same
regardless of the PPP encapsulation type used. regardless of the PPP encapsulation type used.
7.2.2.1 IPv6 Related Infrastructure Changes 7.2.2.1 IPv6 Related Infrastructure Changes
In this scenario the BRAS is Layer 3 aware and it has to be upgraded In this scenario the BRAS is Layer 3 aware and it has to be upgraded
to support IPv6. Since the BRAS terminates the PPP sessions it has to to support IPv6. Since the BRAS terminates the PPP sessions it has
support the implementation of these PPP protocols with IPv6. The to support the implementation of these PPP protocols with IPv6. The
following devices have to be upgraded to dual stack: Host, Customer following devices have to be upgraded to dual stack: Host, Customer
Router (if present), BRAS and Edge Router. Router (if present), BRAS and Edge Router.
7.2.2.2 Addressing 7.2.2.2 Addressing
The BRAS terminates the PPP sessions and provides the subscriber with The BRAS terminates the PPP sessions and provides the subscriber with
an IPv6 address from the defined pool for that profile. The an IPv6 address from the defined pool for that profile. The
subscriber profile for authorization and authentication can be subscriber profile for authorization and authentication can be
located on the BRAS or on a AAA server. The Hosts or the Customer located on the BRAS or on a AAA server. The Hosts or the Customer
Routers have the BRAS as their Layer 3 next hop. Routers have the BRAS as their Layer 3 next hop.
The PPP session can be initiated by a host or by a Customer Router. The PPP session can be initiated by a host or by a Customer Router.
In the latter case, once the session is established with the BRAS and In the latter case, once the session is established with the BRAS and
an address is negotiated for the uplink to the BRAS, DHCP-PD can be an address is negotiated for the uplink to the BRAS, DHCP-PD can be
used to acquire prefixes for the Customer Router other interfaces. used to acquire prefixes for the Customer Router other interfaces.
The BRAS has to be enabled to support DHCP-PD and to relay the The BRAS has to be enabled to support DHCP-PD and to relay the DHCPv6
DHCPv6 requests of the hosts on the subscriber sites. requests of the hosts on the subscriber sites.
The BRAS has a /64 prefixes configured on the link to the Edge The BRAS has a /64 prefixes configured on the link to the Edge
router. The Edge router links are also configured with /64 prefixes router. The Edge router links are also configured with /64 prefixes
to provide connectivity to the rest of the ISP network. to provide connectivity to the rest of the ISP network.
The prefixes used for subscriber and the ones delegated via DHCP-PD The prefixes used for subscriber and the ones delegated via DHCP-PD
should be planned in a manner that allows maximum summarization at should be planned in a manner that allows maximum summarization at
the BRAS. the BRAS.
Other information of interest to the host, such as DNS, is provided Other information of interest to the host, such as DNS, is provided
through stateful [RFC3315] and stateless [RFC3736] DHCPv6. through stateful [11] and stateless [10] DHCPv6.
7.2.2.3 Routing 7.2.2.3 Routing
The CPE devices are configured with a default route that points to The CPE devices are configured with a default route that points to
the BRAS router. No routing protocols are needed on these devices the BRAS router. No routing protocols are needed on these devices
which generally have limited resources. which generally have limited resources.
The BRAS runs an IGP to the Edge Router: OSPFv3 or IS-IS. Since the The BRAS runs an IGP to the Edge Router: OSPFv3 or IS-IS. Since the
addresses assigned to the PPP sessions are represented as connected addresses assigned to the PPP sessions are represented as connected
host routes, connected prefixes have to be redistributed. If DHCP-PD host routes, connected prefixes have to be redistributed. If DHCP-PD
is used, with every delegated prefix a static route is installed by is used, with every delegated prefix a static route is installed by
the Edge Router. For this reason the static routes must also be the Edge Router. For this reason the static routes must also be
redistributed. Prefix summarization should be done at the BRAS. redistributed. Prefix summarization should be done at the BRAS.
The Edge Router is running the IGP used in the ISP network: OSPFv3 The Edge Router is running the IGP used in the ISP network: OSPFv3 or
or IS-IS. IS-IS.
A separation between the routing domains of the ISP and the Access A separation between the routing domains of the ISP and the Access
Provider is recommended if they are managed independently. Controlled Provider is recommended if they are managed independently.
redistribution will be needed between the Access Provider IGP and the Controlled redistribution will be needed between the Access Provider
ISP IGP. IGP and the ISP IGP.
7.2.3 L2TPv2 Access Aggregation (LAA) Model 7.2.3 L2TPv2 Access Aggregation (LAA) Model
In the LAA model the BRAS forwards the CPE initiated session to In the LAA model the BRAS forwards the CPE initiated session to the
the ISP over an L2TPv2 tunnel established between the BRAS and the ISP over an L2TPv2 tunnel established between the BRAS and the Edge
Edge Router. In this case the authentication, authorization and Router. In this case the authentication, authorization and
subscriber configuration are performed by the ISP itself. There subscriber configuration are performed by the ISP itself. There are
are two types of PPP encapsulations that can be leveraged with two types of PPP encapsulations that can be leveraged with this
this model: model:
A. Connection via PPPoA A. Connection via PPPoA
Customer Premises NAP NSP Customer Premises NAP NSP
<--------------------> <----------------------> <-----------------> |--------------------| |----------------------| |-----------------|
+-----------+ +-----------+
| AAA | | AAA |
+-------+ Radius | +-------+ Radius |
| | TACACS | | | TACACS |
| +-----+-----+ | +-----+-----+
| | | |
+-----+ +-------+ +--------+ +----+-----+ +-----+-----+ +-----+ +-------+ +--------+ +----+-----+ +-----+-----+
|Hosts|--+Router +------+ DSLAM +-+ BRAS +-+ Edge | |Hosts|--+Router +------+ DSLAM +-+ BRAS +-+ Edge |
+-----+ +-------+ +--------+ +----------+ | Router +=>Core +-----+ +-------+ +--------+ +----------+ | Router +=>Core
+-----------+ +-----------+
<----------------------------------------> |----------------------------------------|
PPP PPP
<------------> |------------|
L2TPv2 L2TPv2
Figure 7.2.3.1 Figure 7.2.3.1
B. Connection via PPPoE B. Connection via PPPoE
Customer Premises NAP NSP Customer Premises NAP NSP
<---------------------------> <--------------------> <-----------------> |-------------------------| |--------------------| |--------------|
+-----------+ +-----------+
| AAA | | AAA |
+------+ Radius | +------+ Radius |
| | TACACS | | | TACACS |
| +-----+-----+ | +-----+-----+
| | | |
+-----+ +-------+ +--------+ +----+-----+ +----+------+ +-----+ +-------+ +--------+ +----+-----+ +----+------+
|Hosts|--+Router +------------+ DSLAM +-+ BRAS +-+ Edge | C |Hosts|--+Router +----------+ DSLAM +-+ BRAS +-+ Edge | C
+-----+ +-------+ +--------+ +----------+ | Router +=>O +-----+ +-------+ +--------+ +----------+ | Router +=>O
| | R | | R
+-----------+ E +-----------+ E
<-----------------------------------------------> |---------------------------------------------|
PPP PPP
<--------------> |------------|
L2TPv2 L2TPv2
Figure 7.2.3.2 Figure 7.2.3.2
The network design and operation of the PTA model is the same The network design and operation of the PTA model is the same
regardless of the PPP encapsulation type used. regardless of the PPP encapsulation type used.
7.2.3.1 IPv6 Related Infrastructure Changes 7.2.3.1 IPv6 Related Infrastructure Changes
In this scenario the BRAS is forwarding the PPP sessions initiated In this scenario the BRAS is forwarding the PPP sessions initiated by
by the subscriber over the L2TPv2 tunnel established to the LNS, the the subscriber over the L2TPv2 tunnel established to the LNS, the
aggregation point in the ISP network. The L2TPv2 tunnel between the aggregation point in the ISP network. The L2TPv2 tunnel between the
LAC and LNS could run over IPv6 or IPv4. These capabilities LAC and LNS could run over IPv6 or IPv4. These capabilities have to
have to be supported on the BRAS. The following devices have to be be supported on the BRAS. The following devices have to be upgraded
upgraded to dual stack: Host, Customer Router and Edge Router. If to dual stack: Host, Customer Router and Edge Router. If the tunnel
the tunnel is set up over IPv6 then the BRAS must be upgraded to is set up over IPv6 then the BRAS must be upgraded to dual stack.
dual stack.
7.2.3.2 Addressing 7.2.3.2 Addressing
The Edge router terminates the PPP sessions and provides the The Edge router terminates the PPP sessions and provides the
subscriber with an IPv6 address from the defined pool for that subscriber with an IPv6 address from the defined pool for that
profile. The subscriber profile for authorization and authentication profile. The subscriber profile for authorization and authentication
can be located on the Edge Router or on a AAA server. The Hosts or can be located on the Edge Router or on a AAA server. The Hosts or
the Customer Routers have the Edge Router as their Layer 3 next hop. the Customer Routers have the Edge Router as their Layer 3 next hop.
The PPP session can be initiated by a host or by a Customer Router. The PPP session can be initiated by a host or by a Customer Router.
In the latter case, once the session is established with the Edge In the latter case, once the session is established with the Edge
Router, DHCP-PD can be used to acquire prefixes for the Customer Router, DHCP-PD can be used to acquire prefixes for the Customer
Router interfaces. The Edge Router has to be enabled to support Router interfaces. The Edge Router has to be enabled to support
DHCP-PD and to relay the DHCPv6 requests generated by the hosts on DHCP-PD and to relay the DHCPv6 requests generated by the hosts on
the subscriber sites. the subscriber sites.
The BRAS has a /64 prefix configured on the link to the Edge router. The BRAS has a /64 prefix configured on the link to the Edge router.
The Edge router links are also configured with /64 prefixes to The Edge router links are also configured with /64 prefixes to
provide connectivity to the rest of the ISP network. Other provide connectivity to the rest of the ISP network. Other
information of interest to the host, such as DNS, is provided information of interest to the host, such as DNS, is provided through
through stateful [RFC3315] and stateless [RFC3736] DHCPv6. stateful [11] and stateless [10] DHCPv6.
It is important to note here a significant difference between this It is important to note here a significant difference between this
deployment for IPv6 versus IPv4. In the case of IPv4 the customer deployment for IPv6 versus IPv4. In the case of IPv4 the customer
router or CPE can end up on any Edge Router (acting as LNS) where the router or CPE can end up on any Edge Router (acting as LNS) where the
assumption is that there are at least two of them for redundancy assumption is that there are at least two of them for redundancy
purposes. Once authenticated, the customer will be given an address purposes. Once authenticated, the customer will be given an address
from the IP pool of the ER (LNS) it connected to. This allows the ERs from the IP pool of the ER (LNS) it connected to. This allows the
(LNSs) to aggregate the addresses handed out to the customers. In the ERs (LNSs) to aggregate the addresses handed out to the customers.
case of IPv6, an important constraint that likely will be enforced is In the case of IPv6, an important constraint that likely will be
that the customer should keep its own address regardless of the ER enforced is that the customer should keep its own address regardless
(LNS) it connects to. This could significantly reduce the prefix of the ER (LNS) it connects to. This could significantly reduce the
aggregation capabilities of the ER (LNS). This is different than the prefix aggregation capabilities of the ER (LNS). This is different
current IPv4 deployment where addressing is dynamic in nature and the than the current IPv4 deployment where addressing is dynamic in
same user can get different addresses depending on the LNS it ends up nature and the same user can get different addresses depending on the
connecting to. LNS it ends up connecting to.
One possible solution is to ensure that a given BRAS will always One possible solution is to ensure that a given BRAS will always
connect to the same ER (LNS) unless that LNS is down. This means that connect to the same ER (LNS) unless that LNS is down. This means
customers from a given prefix range will always be connected to the that customers from a given prefix range will always be connected to
same ER (primary if up or secondary if not). Each ER (LNS) can carry the same ER (primary if up or secondary if not). Each ER (LNS) can
summary statements in their routing protocol configuration for the carry summary statements in their routing protocol configuration for
prefixes they are the primary ER (LNS) as well as for the ones for the prefixes they are the primary ER (LNS) as well as for the ones
which they are the secondary. This way the prefixes will be for which they are the secondary. This way the prefixes will be
summarized any time they become "active" on the ER (LNS). summarized any time they become "active" on the ER (LNS).
7.2.3.3 Routing 7.2.3.3 Routing
The CPE devices are configured with a default route that points to The CPE devices are configured with a default route that points to
the Edge router that terminates the PPP sessions. No routing the Edge router that terminates the PPP sessions. No routing
protocols are needed on these devices which have generally limited protocols are needed on these devices which have generally limited
resources. resources.
The BRAS runs an IPv6 IGP to the Edge Router: OSPFv3 or IS-IS. The BRAS runs an IPv6 IGP to the Edge Router: OSPFv3 or IS-IS.
Different processes should be used if the NAP and the NSP are Different processes should be used if the NAP and the NSP are managed
managed by different organizations. In this case, controlled by different organizations. In this case, controlled redistribution
redistribution should be enabled between the two domains. should be enabled between the two domains.
The Edge Router is running the IPv6 IGP used in the ISP network: The Edge Router is running the IPv6 IGP used in the ISP network:
OSPFv3 or IS-IS. OSPFv3 or IS-IS.
7.2.4 Hybrid Model for IPv4 and IPv6 Service 7.2.4 Hybrid Model for IPv4 and IPv6 Service
It was recommended throughout this section that the IPv6 service It was recommended throughout this section that the IPv6 service
implementation should map the existent IPv4 one. This approach implementation should map the existent IPv4 one. This approach
simplifies manageability and minimizes training needed for personnel simplifies manageability and minimizes training needed for personnel
operating the network. In certain circumstances such mapping is not operating the network. In certain circumstances such mapping is not
feasible. This typically becomes the case when a Service Provider feasible. This typically becomes the case when a Service Provider
plans to expand its service offering with the new IPv6 deployed plans to expand its service offering with the new IPv6 deployed
infrastructure. If this new service is not well supported in a infrastructure. If this new service is not well supported in a
network design such as the one used for IPv4 then a different design network design such as the one used for IPv4 then a different design
might be used for IPv6. might be used for IPv6.
An example of such circumstances is that of a provider using an LAA An example of such circumstances is that of a provider using an LAA
design for its IPv4 services. In this case all the PPP sessions are design for its IPv4 services. In this case all the PPP sessions are
bundled and tunneled across the entire NAP infrastructure which is bundled and tunneled across the entire NAP infrastructure which is
made of multiple BRAS routers, aggregation routers etc. The end point made of multiple BRAS routers, aggregation routers etc. The end
of these tunnels is the ISP Edge Router. If the provider decides to point of these tunnels is the ISP Edge Router. If the provider
offer multicast services over such a design, it will face the problem decides to offer multicast services over such a design, it will face
of NAP resources being over utilized. The multicast traffic can be the problem of NAP resources being over utilized. The multicast
replicated only at the end of the tunnels by the Edge router and the traffic can be replicated only at the end of the tunnels by the Edge
copies for all the subscribers are carried over the entire NAP. router and the copies for all the subscribers are carried over the
entire NAP.
A Modified Point-to-Point (as described in 7.2.4.2) or PTA model are A Modified Point-to-Point (as described in 7.2.4.2) or PTA model are
more suitable to support multicast services because the packet more suitable to support multicast services because the packet
replication can be done closer to the destination at the BRAS. Such replication can be done closer to the destination at the BRAS. Such
topology saves NAP resources. topology saves NAP resources.
In this sense IPv6 deployment can be viewed as an opportunity to In this sense IPv6 deployment can be viewed as an opportunity to
build an infrastructure that might better support the expansion of build an infrastructure that might better support the expansion of
services. In this case, an SP using the LAA design for its IPv4 services. In this case, an SP using the LAA design for its IPv4
services might choose a modified Point-to-Point or PTA design for services might choose a modified Point-to-Point or PTA design for
skipping to change at page 35, line 8 skipping to change at page 40, line 5
The coexistence of the two PPP based models, PTA and LAA, is The coexistence of the two PPP based models, PTA and LAA, is
relatively straight forward. The PPP sessions are terminated on relatively straight forward. The PPP sessions are terminated on
different network devices for the IPv4 and IPv6 services. The PPP different network devices for the IPv4 and IPv6 services. The PPP
sessions for the existent IPv4 service deployed in an LAA model are sessions for the existent IPv4 service deployed in an LAA model are
terminated on the Edge Router. The PPP sessions for the new IPv6 terminated on the Edge Router. The PPP sessions for the new IPv6
service deployed in a PTA model are terminated on the BRAS. service deployed in a PTA model are terminated on the BRAS.
The logical design for IPv6 and IPv4 in this hybrid model is The logical design for IPv6 and IPv4 in this hybrid model is
presented in Figure 7.2.4.1. presented in Figure 7.2.4.1.
IPv6 <--------------------------> IPv6 |--------------------------|
PPP +-----------+ PPP +-----------+
| AAA | | AAA |
+-------+ Radius | +-------+ Radius |
| | TACACS | | | TACACS |
| +-----+-----+ | +-----+-----+
| | | |
+-----+ +-------+ +--------+ +----+-----+ +-----+-----+ +-----+ +-------+ +--------+ +----+-----+ +-----+-----+
|Hosts|--+Router +------+ DSLAM +-+ BRAS +-+ Edge | |Hosts|--+Router +------+ DSLAM +-+ BRAS +-+ Edge |
+-----+ +-------+ +--------+ +----------+ | Router +=>Core +-----+ +-------+ +--------+ +----------+ | Router +=>Core
+-----------+ +-----------+
IPv4 <----------------------------------------> IPv4 |----------------------------------------|
PPP PPP
<------------> |------------|
L2TPv2 L2TPv2
Figure 7.2.4.1 Figure 7.2.4.1
7.2.4.2 IPv4 in LAA Model and IPv6 in Modified Point-to-Point Model 7.2.4.2 IPv4 in LAA Model and IPv6 in Modified Point-to-Point Model
In this particular scenario the Point-to-Point model used for the In this particular scenario the Point-to-Point model used for the
IPv6 service is a modified version of the model described in section IPv6 service is a modified version of the model described in section
7.2.1. 7.2.1.
For the IPv4 service in LAA model, the VLANs are terminated on the For the IPv4 service in LAA model, the VLANs are terminated on the
BRAS and PPP sessions are terminated on the Edge Router (LNS). For BRAS and PPP sessions are terminated on the Edge Router (LNS). For
IPv6 service in Point-to-Point model, the VLANs are terminated at IPv6 service in Point-to-Point model, the VLANs are terminated at the
the Edge Router as described in section 7.2.1. In this hybrid model, Edge Router as described in section 7.2.1. In this hybrid model, the
the Point-to-Point link could be terminated on the BRAS, a NAP owned Point-to-Point link could be terminated on the BRAS, a NAP owned
device. The IPv6 traffic is then routed through the NAP network to device. The IPv6 traffic is then routed through the NAP network to
the NSP. In order to have this hybrid model, the BRAS has to be the NSP. In order to have this hybrid model, the BRAS has to be
upgraded to a dual-stack router. The functionalities of the Edge upgraded to a dual-stack router. The functionalities of the Edge
Router as described in section 7.2.1 are now implemented on the BRAS. Router as described in section 7.2.1 are now implemented on the BRAS.
The other aspect of this deployment model is the fact that the BRAS The other aspect of this deployment model is the fact that the BRAS
has to be capable of distinguishing between the IPv4 PPP traffic that has to be capable of distinguishing between the IPv4 PPP traffic that
has to be bridged across the L2TPv2 tunnel and the IPv6 packets that has to be bridged across the L2TPv2 tunnel and the IPv6 packets that
have to be routed to the NSP. The IPv6 Routing and Bridging have to be routed to the NSP. The IPv6 Routing and Bridging
Encapsulation (RBE) has to be enabled on all interfaces with VLANs Encapsulation (RBE) has to be enabled on all interfaces with VLANs
supporting both IPv4 and IPv6 services in this hybrid design. supporting both IPv4 and IPv6 services in this hybrid design.
The logical design for IPv6 and IPv4 in this hybrid model is The logical design for IPv6 and IPv4 in this hybrid model is
presented in Figure 7.2.4.2. presented in Figure 7.2.4.2.
IPv6 <----------------> IPv6 |----------------|
ATM +-----------+ ATM +-----------+
| AAA | | AAA |
+-------+ Radius | +-------+ Radius |
| | TACACS | | | TACACS |
| +-----+-----+ | +-----+-----+
| | | |
+-----+ +-------+ +--------+ +----+-----+ +-----+-----+ +-----+ +-------+ +--------+ +----+-----+ +-----+-----+
|Hosts|--+Router +------+ DSLAM +-+ BRAS +-+ Edge | |Hosts|--+Router +------+ DSLAM +-+ BRAS +-+ Edge |
+-----+ +-------+ +--------+ +----------+ | Router +=>Core +-----+ +-------+ +--------+ +----------+ | Router +=>Core
+-----------+ +-----------+
IPv4 <----------------------------------------> IPv4 |----------------------------------------|
PPP PPP
<------------> |------------|
L2TPv2 L2TPv2
Figure 7.2.4.2 Figure 7.2.4.2
7.3 IPv6 Multicast 7.3 IPv6 Multicast
The deployment of IPv6 multicast services relies on MLD, identical to The deployment of IPv6 multicast services relies on MLD, identical to
IGMP in IPv4 and on PIM for routing. ASM (Any Source Multicast) and IGMP in IPv4 and on PIM for routing. ASM (Any Source Multicast) and
SSM (Single Source Multicast) service models operate almost the same SSM (Single Source Multicast) service models operate almost the same
as in IPv4. Both have the same benefits and disadvantages as in IPv4. as in IPv4. Both have the same benefits and disadvantages as in
Nevertheless, the larger address space and the scoped address IPv4. Nevertheless, the larger address space and the scoped address
architecture provide major benefits for multicast IPv6. Through architecture provide major benefits for multicast IPv6. Through
RFC3306 the large address space provides the means to assign global RFC3306 the large address space provides the means to assign global
multicast group addresses to organizations or users that were multicast group addresses to organizations or users that were
assigned unicast prefixes. It is a significant improvement with assigned unicast prefixes. It is a significant improvement with
respect to the IPv4 GLOP mechanism [RFC2770]. respect to the IPv4 GLOP mechanism [19].
This facilitates the deployment of multicast services. The This facilitates the deployment of multicast services. The
discussion of this section applies to all the multicast sections discussion of this section applies to all the multicast sections in
in the document. the document.
7.3.1 ASM Based Deployments 7.3.1 ASM Based Deployments
Any Source Multicast (ASM) is useful for Service Providers that Any Source Multicast (ASM) is useful for Service Providers that
intend to support the forwarding of multicast traffic of their intend to support the forwarding of multicast traffic of their
customers. It is based on the PIM-SM protocol and it is more complex customers. It is based on the PIM-SM protocol and it is more complex
to manage because of the use of Rendezvous Points (RPs). With IPv6, to manage because of the use of Rendezvous Points (RPs). With IPv6,
static RP and BSR [BSR] can be used for RP-to-group mapping similar static RP and BSR [34] can be used for RP-to-group mapping similar to
to IPv4. Additionally, the larger IPv6 address space allows for IPv4. Additionally, the larger IPv6 address space allows for
building up of group addresses that incorporate the address of the building up of group addresses that incorporate the address of the
RP. This RP-to-group mapping mechanism is called Embedded RP and is RP. This RP-to-group mapping mechanism is called Embedded RP and is
specific to IPv6. specific to IPv6.
In inter-domain deployments, Multicast Source Discovery Protocol In inter-domain deployments, Multicast Source Discovery Protocol
(MSDP) [RFC3618] is an important element of IPv4 PIM-SM deployments. (MSDP) [22] is an important element of IPv4 PIM-SM deployments. MSDP
MSDP is meant to be a solution for the exchange of source is meant to be a solution for the exchange of source registration
registration information between RPs in different domains. This information between RPs in different domains. This solution was
solution was intended to be temporary. This is one of the reasons intended to be temporary. This is one of the reasons why it was
why it was decided not to implement MSDP in IPv6 [IPv6 Multicast]. decided not to implement MSDP in IPv6 [32].
For multicast reachability across domains, Embedded RP could be For multicast reachability across domains, Embedded RP could be used.
used. Despite its shortcomings, MSDP provides additional Despite its shortcomings, MSDP provides additional flexibility in
flexibility in managing the domains that may not be matched with managing the domains that may not be matched with the protocols
the protocols available in IPv6 today. The value of such available in IPv6 today. The value of such flexibility is still
flexibility is still under evaluation. under evaluation.
7.3.2 SSM Based Deployments 7.3.2 SSM Based Deployments
Based on PIM-SSM, the Source Specific Multicast deployments do not Based on PIM-SSM, the Source Specific Multicast deployments do not
need an RP and the related protocols (such as BSR or MSDP) but rely need an RP and the related protocols (such as BSR or MSDP) but rely
on the listeners to know the source of the multicast traffic on the listeners to know the source of the multicast traffic they
they plan to receive. The lack of RP makes SSM not only simpler to plan to receive. The lack of RP makes SSM not only simpler to
operate but also robust, it is not impacted by RP failures or inter operate but also robust, it is not impacted by RP failures or inter
domain constraints. It is also has a higher level of security (No RP domain constraints. It is also has a higher level of security (No RP
to be targeted by attacks). For more discussions on the topic of to be targeted by attacks). For more discussions on the topic of
IPv6 multicast see [IPv6 Multicast]. IPv6 multicast see [32].
The typical multicast services offered for residential and very The typical multicast services offered for residential and very small
small businesses is video/audio streaming where the subscriber joins businesses is video/audio streaming where the subscriber joins a
a multicast group and receives the content. This type of service multicast group and receives the content. This type of service model
model is well supported through PIM-SSM which is very simple and is well supported through PIM-SSM which is very simple and easy to
easy to manage. PIM-SSM has to be enabled throughout the SP network. manage. PIM-SSM has to be enabled throughout the SP network. MLDv2
MLDv2 is required for PIM-SSM support. Vendors can choose to is required for PIM-SSM support. Vendors can choose to implement
implement features that allow routers to map MLDv1 group joins to features that allow routers to map MLDv1 group joins to predefined
predefined sources. sources.
Subscribers might use a set-top box that is responsible for the Subscribers might use a set-top box that is responsible for the
control piece of the multicast service (does group joins/leaves). control piece of the multicast service (does group joins/leaves).
The subscriber hosts can also join desired multicast groups as long The subscriber hosts can also join desired multicast groups as long
as they are enabled to support MLDv1 or MLDv2. If a customer premise as they are enabled to support MLDv1 or MLDv2. If a customer premise
router is used then it has to be enabled to support MLDv1 and MLDv2 router is used then it has to be enabled to support MLDv1 and MLDv2
in order to process the requests of the hosts. It has to be enabled in order to process the requests of the hosts. It has to be enabled
to support PIM-SSM in order to send PIM joins/leaves up to its to support PIM-SSM in order to send PIM joins/leaves up to its Layer
Layer 3 next hop whether it is the BRAS or the Edge router. When 3 next hop whether it is the BRAS or the Edge router. When enabling
enabling this functionality on a customer premises router, its this functionality on a customer premises router, its limited
limited resources should be taken into consideration. Another option resources should be taken into consideration. Another option would
would be for the customer premises router to support MLD proxy be for the customer premises router to support MLD proxy routing.
routing.
The router that is the Layer 3 next hop for the subscriber (BRAS in The router that is the Layer 3 next hop for the subscriber (BRAS in
the PTA model or the Edge router in the LAA and Point-to-Point the PTA model or the Edge router in the LAA and Point-to-Point model)
model) has to be enabled to support MLDv1 and MLDv2 in order to has to be enabled to support MLDv1 and MLDv2 in order to process the
process the requests coming from subscribers without customer requests coming from subscribers without customer premises routers.
premises routers. It has to be enabled for PIM-SSM in order to
receive joins/leaves from customer routers and send joins/leaves It has to be enabled for PIM-SSM in order to receive joins/leaves
to the next hop towards the multicast source (Edge router or the from customer routers and send joins/leaves to the next hop towards
NSP core). the multicast source (Edge router or the NSP core).
MLD authentication, authorization and accounting is usually MLD authentication, authorization and accounting is usually
configured on the edge router in order to enable the ISP to do configured on the edge router in order to enable the ISP to do
control the subscriber access of the service and do billing for the control the subscriber access of the service and do billing for the
content provided. Alternative mechanisms that would support these content provided. Alternative mechanisms that would support these
functions should be investigated further. functions should be investigated further.
7.4 IPv6 QoS 7.4 IPv6 QoS
The QoS configuration is particularly relevant on the router that The QoS configuration is particularly relevant on the router that
skipping to change at page 38, line 41 skipping to change at page 43, line 51
It is important to note that when traffic is encrypted end-to-end, It is important to note that when traffic is encrypted end-to-end,
the traversed network devices will not have access to many of the the traversed network devices will not have access to many of the
packet fields used for classification purposes. In these cases packet fields used for classification purposes. In these cases
routers will most likely place the packets in the default classes. routers will most likely place the packets in the default classes.
The QoS design should take into consideration this scenario and try The QoS design should take into consideration this scenario and try
to use mainly IP header fields for classification purposes. to use mainly IP header fields for classification purposes.
7.5 IPv6 Security Considerations 7.5 IPv6 Security Considerations
There are limited changes that have to be done for CPEs in order to There are limited changes that have to be done for CPEs in order to
enhance security. The Privacy extensions for auto-configuration enhance security. The Privacy extensions for auto-configuration [14]
[RFC3041] should be used by the hosts. ISPs can track the prefixes should be used by the hosts. ISPs can track the prefixes it assigns
it assigns to subscribers relatively easily. If however the ISPs are to subscribers relatively easily. If however the ISPs are required
required by regulations to track their users at /128 address level, by regulations to track their users at /128 address level, the
the Privacy Extensions can be implemented only in parallel with Privacy Extensions can be implemented only in parallel with network
network management tools that could provide traceability of the management tools that could provide traceability of the hosts. IPv6
hosts. IPv6 firewall functions should be enabled on the hosts or firewall functions should be enabled on the hosts or customer
customer premises router if present. premises router if present.
The ISP provides security against attacks that come form its own The ISP provides security against attacks that come form its own
subscribers but it could also implement security services that subscribers but it could also implement security services that
protect its subscribers from attacks sourced from the outside of its protect its subscribers from attacks sourced from the outside of its
network. Such services do not apply at the access level of the network. Such services do not apply at the access level of the
network discussed here. network discussed here.
The device that is the Layer 3 next hop for the subscribers (BRAS or The device that is the Layer 3 next hop for the subscribers (BRAS or
Edge router) should protect the network and the other subscribers Edge router) should protect the network and the other subscribers
against attacks by one of the provider customers. For this reason against attacks by one of the provider customers. For this reason
uRPF and ACLs should be used on all interfaces facing subscribers. uRPF and ACLs should be used on all interfaces facing subscribers.
Filtering should be implemented with regard for the operational Filtering should be implemented with regard for the operational
requirements of IPv6 [Security considerations for IPv6]. requirements of IPv6 [36]. Authentication and authorization should
Authentication and authorization should be used wherever possible. be used wherever possible.
The BRAS and the Edge Router should protect their processing The BRAS and the Edge Router should protect their processing
resources against floods of valid customer control traffic such as: resources against floods of valid customer control traffic such as:
Router and Neighbor Solicitations, MLD Requests. Rate limiting Router and Neighbor Solicitations, MLD Requests. Rate limiting
should be implemented on all subscriber facing interfaces. The should be implemented on all subscriber facing interfaces. The
emphasis should be placed on multicast type traffic as it is most emphasis should be placed on multicast type traffic as it is most
often used by the IPv6 control plane. often used by the IPv6 control plane.
All other security features used with the IPv4 service should be All other security features used with the IPv4 service should be
similarly applied to IPv6 as well. similarly applied to IPv6 as well.
skipping to change at page 39, line 35 skipping to change at page 44, line 50
Usually, NSPs manage the edge routers by SNMP. The SNMP transport Usually, NSPs manage the edge routers by SNMP. The SNMP transport
can be done over IPv4 if all managed devices have connectivity over can be done over IPv4 if all managed devices have connectivity over
both IPv4 and IPv6. This would imply the smallest changes to the both IPv4 and IPv6. This would imply the smallest changes to the
existent network management practices and processes. Transport over existent network management practices and processes. Transport over
IPv6 could also be implemented and it might become necessary if IPv6 IPv6 could also be implemented and it might become necessary if IPv6
only islands are present in the network. The management stations are only islands are present in the network. The management stations are
located on the core network. Network Management Applications should located on the core network. Network Management Applications should
handle IPv6 in a similar fashion to IPv4, however, they should also handle IPv6 in a similar fashion to IPv4, however, they should also
support features specific to IPv6 (such as Neighbor monitoring). support features specific to IPv6 (such as Neighbor monitoring).
In some cases service providers manage equipment located on In some cases service providers manage equipment located on customers
customers LANs. The management of equipment at customers' LANs is LANs. The management of equipment at customers' LANs is out of scope
out of scope of this memo. of this memo.
8. Broadband Ethernet Networks 8. Broadband Ethernet Networks
This section describes the IPv6 deployment options in currently This section describes the IPv6 deployment options in currently
deployed Broadband Ethernet Access Networks. deployed Broadband Ethernet Access Networks.
8.1 Ethernet Access Network Elements 8.1 Ethernet Access Network Elements
In environments that support the infrastructure deploying RJ-45 or In environments that support the infrastructure deploying RJ-45 or
fiber (Fiber to the Home (FTTH) service) to subscribers, 10/100 fiber (Fiber to the Home (FTTH) service) to subscribers, 10/100 Mbps
Mbps Ethernet broadband services can be provided. Such services are Ethernet broadband services can be provided. Such services are
generally available in metropolitan areas, in multi tenant buildings generally available in metropolitan areas, in multi tenant buildings
where an Ethernet infrastructure can be deployed in a cost effective where an Ethernet infrastructure can be deployed in a cost effective
manner. In such environments Metro-Ethernet services can be used to manner. In such environments Metro-Ethernet services can be used to
provide aggregation and uplink to a Service Provider. provide aggregation and uplink to a Service Provider.
The following network elements are typical of an Ethernet network: The following network elements are typical of an Ethernet network:
Access Switch: It is used as a Layer 2 access device for subscribers. Access Switch: It is used as a Layer 2 access device for subscribers.
Customer Premises Router: It is used to provide Layer 3 services Customer Premises Router: It is used to provide Layer 3 services for
for customer premises networks. customer premises networks.
Aggregation Ethernet Switches: Aggregates multiple subscribers. Aggregation Ethernet Switches: Aggregates multiple subscribers.
Broadband Remote Access Server (BRAS) Broadband Remote Access Server (BRAS)
Edge Router (ER) Edge Router (ER)
Figure 8.1 depicts all the network elements mentioned. Figure 8.1 depicts all the network elements mentioned.
Customer Premises | Network Access Provider | Network Service Provider Customer Premises | Network Access Provider | Network Service Provider
skipping to change at page 40, line 39 skipping to change at page 46, line 28
+-----+ |Access | +--+ | +-----+ |Access | +--+ |
|Hosts|--+Switch +-+ +------+ |Hosts|--+Switch +-+ +------+
+-----+ +--------+ +-----+ +--------+
Figure 8.1 Figure 8.1
The logical topology and design of Broadband Ethernet Networks is The logical topology and design of Broadband Ethernet Networks is
very similar to DSL Broadband Networks discussed in section 7. very similar to DSL Broadband Networks discussed in section 7.
It is worth noting that the general operation, concepts and It is worth noting that the general operation, concepts and
recommendations described in this section apply similarly to a recommendations described in this section apply similarly to a
HomePNA based network environment. In such an environment some HomePNA based network environment. In such an environment some of
of the network elements might be differently named. the network elements might be differently named.
8.2 Deploying IPv6 in IPv4 Broadband Ethernet Networks 8.2 Deploying IPv6 in IPv4 Broadband Ethernet Networks
There are three main design approaches to providing IPv4 There are three main design approaches to providing IPv4 connectivity
connectivity over an Ethernet infrastructure: over an Ethernet infrastructure:
A. Point-to-Point Model: Each subscriber connects to the network A. Point-to-Point Model: Each subscriber connects to the network
Access switch over RJ-45 or fiber links. Each subscriber is assigned Access switch over RJ-45 or fiber links. Each subscriber is assigned
a unique VLAN on the access switch. The VLAN can be terminated at a unique VLAN on the access switch. The VLAN can be terminated at
the BRAS or at the Edge Router. The VLANs are 802.1q trunked to the the BRAS or at the Edge Router. The VLANs are 802.1q trunked to the
Layer 3 device (BRAS or Edge Router). Layer 3 device (BRAS or Edge Router).
This model is presented in section 8.2.1. This model is presented in section 8.2.1.
B. PPP Terminated Aggregation (PTA) Model: PPP sessions are opened B. PPP Terminated Aggregation (PTA) Model: PPP sessions are opened
between each subscriber and the BRAS. The BRAS terminates the PPP between each subscriber and the BRAS. The BRAS terminates the PPP
sessions and provides Layer 3 connectivity between the subscriber sessions and provides Layer 3 connectivity between the subscriber and
and the ISP. the ISP.
This model is presented in section 8.2.2. This model is presented in section 8.2.2.
C. L2TPv2 Access Aggregation (LAA) Model: PPP sessions are opened C. L2TPv2 Access Aggregation (LAA) Model: PPP sessions are opened
between each subscriber and the ISP termination devices. The BRAS between each subscriber and the ISP termination devices. The BRAS
tunnels the subscriber PPP sessions to the ISP by encapsulating them tunnels the subscriber PPP sessions to the ISP by encapsulating them
into L2TPv2 tunnels. into L2TPv2 tunnels.
This model is presented in section 8.2.3. This model is presented in section 8.2.3.
In aggregation models the BRAS terminates the subscriber VLANs and In aggregation models the BRAS terminates the subscriber VLANs and
aggregates their connections before providing access to the ISP. aggregates their connections before providing access to the ISP.
In order to maintain the deployment concepts and business models In order to maintain the deployment concepts and business models
proven and used with existent revenue generating IPv4 services, the proven and used with existent revenue generating IPv4 services, the
IPv6 deployment will match the IPv4 one. This approach is presented IPv6 deployment will match the IPv4 one. This approach is presented
in sections 8.2.1-3 that describes currently deployed IPv4 over in sections 8.2.1-3 that describe currently deployed IPv4 over
Ethernet broadband access deployments. Under certain circumstances Ethernet broadband access deployments. Under certain circumstances
where new service types or service needs justify it, IPv4 and IPv6 where new service types or service needs justify it, IPv4 and IPv6
network architectures could be different as described in section network architectures could be different as described in section
8.2.4. 8.2.4.
8.2.1 Point-to-Point Model 8.2.1 Point-to-Point Model
In this scenario the Ethernet frames from the Host or the Customer In this scenario the Ethernet frames from the Host or the Customer
Premises Router are bridged over the VLAN assigned to the subscriber. Premises Router are bridged over the VLAN assigned to the subscriber.
Figure 8.2.1 describes the protocol architecture of this model. Figure 8.2.1 describes the protocol architecture of this model.
Customer Premises NAP NSP | Customer Premises | | NAP | NSP |
<-------------------------> <---------------> <-------------------->
+-----+ +------+ +------+ +--------+ +----------+ +-----+ +------+ +------+ +--------+ +----------+
|Hosts|--+Router+--+Access+--+ Switch +--------+ Edge | ISP |Hosts|--+Router+--+Access+--+ Switch +--------+ Edge | ISP
+-----+ +------+ |Switch| +--------+ 802.1q | Router +==> Network +-----+ +------+ |Switch| +--------+ 802.1q | Router +==> Network
+------+ +----------+ +------+ +----------+
<----------------------------> |----------------------------|
Ethernet/VLANs Ethernet/VLANs
Figure 8.2.1 Figure 8.2.1
8.2.1.1 IPv6 Related Infrastructure Changes 8.2.1.1 IPv6 Related Infrastructure Changes
In this scenario the Access Switch on the customer site and the In this scenario the Access Switch on the customer site and the
entire NAP is Layer 3 unaware so no changes are needed to support entire NAP is Layer 3 unaware so no changes are needed to support
IPv6. The following devices have to be upgraded to dual stack: Host, IPv6. The following devices have to be upgraded to dual stack: Host,
Customer Router and Edge Router. Customer Router and Edge Router.
The Access switches might need upgrades to support certain IPv6 The Access switches might need upgrades to support certain IPv6
related features such as MLD Snooping. related features such as MLD Snooping.
8.2.1.2 Addressing 8.2.1.2 Addressing
The Hosts or the Customer Routers have the Edge Router as their The Hosts or the Customer Routers have the Edge Router as their Layer
Layer 3 next hop. If there is no Customer Router all the hosts on 3 next hop. If there is no Customer Router all the hosts on the
subscriber site belong to the same /64 subnet that is statically
the subscriber site belong to the same /64 subnet that is configured on the Edge Router for that subscriber VLAN. The hosts
statically configured on the Edge Router for that subscriber VLAN. can use stateless autoconfiguration or stateful DHCPv6 based
The hosts can use stateless autoconfiguration or stateful DHCPv6 configuration to acquire an address via the Edge Router.
based configuration to acquire an address via the Edge Router.
If a Customer Router is present: If a Customer Router is present:
A. It is statically configured with an address on the /64 subnet A. It is statically configured with an address on the /64 subnet
between itself and the Edge Router, and with /64 prefixes on the between itself and the Edge Router, and with /64 prefixes on the
interfaces connecting the hosts on the customer site. This is not interfaces connecting the hosts on the customer site. This is not a
a desired provisioning method being expensive and difficult to desired provisioning method being expensive and difficult to manage.
manage.
B. It can use its link-local address to communicate with the ER. B. It can use its link-local address to communicate with the ER. It
It can also dynamically acquire through stateless autoconfiguration can also dynamically acquire through stateless autoconfiguration the
the address for the link between itself and the ER. This step is address for the link between itself and the ER. This step is
followed by a request via DHCP-PD for a prefix shorter than /64 that followed by a request via DHCP-PD for a prefix shorter than /64 that
in turn is divided in /64s and assigned to its interfaces connecting in turn is divided in /64s and assigned to its interfaces connecting
the hosts on the customer site. the hosts on the customer site.
The Edge Router has a /64 prefix configured for each subscriber VLAN. The Edge Router has a /64 prefix configured for each subscriber VLAN.
Each VLAN should be enabled to relay DHCPv6 requests from the Each VLAN should be enabled to relay DHCPv6 requests from the
subscribers to DHCPv6 servers in the ISP network. The VLANs subscribers to DHCPv6 servers in the ISP network. The VLANs
providing access for subscribers that use DHCP-PD as well, have to providing access for subscribers that use DHCP-PD as well, have to be
be enabled to support the feature. Currently the DHCP-PD enabled to support the feature. Currently the DHCP-PD functionality
functionality cannot be implemented if the DHCP-PD server is not the cannot be implemented if the DHCP-PD server is not the Edge Router.
Edge Router. If the DHCP-PD messages are relayed, the Edge Router If the DHCP-PD messages are relayed, the Edge Router does not have a
does not have a mechanism to learn the assigned prefixes and thus mechanism to learn the assigned prefixes and thus install the proper
install the proper routes to make that prefix reachable. Work is routes to make that prefix reachable. Work is being done to address
being done to address this issue, one idea being to provide the Edge this issue, one idea being to provide the Edge Router with a snooping
Router with a snooping mechanism. The uplink to the ISP network is mechanism. The uplink to the ISP network is configured with a /64
configured with a /64 prefix as well. The uplink to the ISP network prefix as well. The uplink to the ISP network is configured with a
is configured with a /64 prefix as well. /64 prefix as well.
The prefixes used for subscriber links and the ones delegated via The prefixes used for subscriber links and the ones delegated via
DHCP-PD should be planned in a manner that allows as much DHCP-PD should be planned in a manner that allows as much
summarization as possible at the Edge Router. summarization as possible at the Edge Router.
Other information of interest to the host, such as DNS, is provided Other information of interest to the host, such as DNS, is provided
through stateful [RFC3315] and stateless [RFC3736] DHCPv6. through stateful [11] and stateless [10] DHCPv6.
8.2.1.3 Routing 8.2.1.3 Routing
The CPE devices are configured with a default route that points to The CPE devices are configured with a default route that points to
the Edge router. No routing protocols are needed on these devices the Edge router. No routing protocols are needed on these devices
which generally have limited resources. which generally have limited resources.
The Edge Router runs the IPv6 IGP used in the NSP: OSPFv3 or IS-IS. The Edge Router runs the IPv6 IGP used in the NSP: OSPFv3 or IS-IS.
The connected prefixes have to be redistributed. If DHCP-PD is used, The connected prefixes have to be redistributed. If DHCP-PD is used,
with every delegated prefix a static route is installed by the Edge with every delegated prefix a static route is installed by the Edge
Router. For this reason the static routes must also be redistributed. Router. For this reason the static routes must also be
Prefix summarization should be done at the Edge Router. redistributed. Prefix summarization should be done at the Edge
Router.
8.2.2 PPP Terminated Aggregation (PTA) Model 8.2.2 PPP Terminated Aggregation (PTA) Model
The PTA architecture relies on PPP-based protocols (PPPoE). The PPP The PTA architecture relies on PPP-based protocols (PPPoE). The PPP
sessions are initiated by Customer Premise Equipment and it is sessions are initiated by Customer Premise Equipment and it is
terminated at the BRAS. The BRAS authorizes the session, terminated at the BRAS. The BRAS authorizes the session,
authenticates the subscriber, and provides an IP address on behalf authenticates the subscriber, and provides an IP address on behalf of
of the ISP. The BRAS then does Layer 3 routing of the subscriber the ISP. The BRAS then does Layer 3 routing of the subscriber
traffic to the NSP Edge Router. This model is often used when the traffic to the NSP Edge Router. This model is often used when the
NSP is also the NAP. The PPPoE logical diagram in an Ethernet NSP is also the NAP. The PPPoE logical diagram in an Ethernet
Broadband Network is shown in Fig 8.2.2.1. Broadband Network is shown in Fig 8.2.2.1.
Customer Premises NAP NSP | Customer Premises | | NAP | | NSP |
<---------------------------> <-----------------> <----------------->
+-----------+ +-----------+
| AAA | | AAA |
+-------+ Radius | +-----+ Radius |
| | TACACS | | | TACACS |
| +-----------+ | +-----------+
+-----+ +-------+ +--------+ +--------+ +----+-----+ +-----------+ +-----+ +-------+ +--------+ +--------+ +----+---+ +-----------+
|Hosts|--+Router +-+A Switch+-+ Switch +-+ BRAS +-+ Edge | C |Hosts|--+Router +-+A Switch+-+ Switch +-+ BRAS +-+ Edge | C
+-----+ +-------+ +--------+ +--------+ +----------+ | Router +=>O +-----+ +-------+ +--------+ +--------+ +--------+ | Router +=>O
<---------------- PPP ----------------> | | R |---------------- PPP ----------------| | | R
+-----------+ E +-----------+ E
Figure 8.2.2.1 Figure 8.2.2.1
The PPP sessions are initiated by the Customer Premise Equipment The PPP sessions are initiated by the Customer Premise Equipment
(Host or Router). The BRAS authenticates the subscriber against a (Host or Router). The BRAS authenticates the subscriber against a
local or a remote database. Once the session is established, the local or a remote database. Once the session is established, the
BRAS provides an address and maybe a DNS server to the user, BRAS provides an address and maybe a DNS server to the user,
information acquired from the subscriber profile or from a DHCP information acquired from the subscriber profile or from a DHCP
server. server.
This model allows for multiple PPPoE session to be supported over This model allows for multiple PPPoE sessions to be supported over
the same VLAN thus allowing the subscriber to connect to multiple the same VLAN thus allowing the subscriber to connect to multiple
services at the same time. The hosts can initiate the PPPoE sessions services at the same time. The hosts can initiate the PPPoE sessions
as well. It is important to remember that the PPPoE encapsulation as well. It is important to remember that the PPPoE encapsulation
reduces the IP MTU available for the customer traffic. reduces the IP MTU available for the customer traffic.
8.2.2.1 IPv6 Related Infrastructure Changes 8.2.2.1 IPv6 Related Infrastructure Changes
In this scenario the BRAS is Layer 3 aware and it has to be upgraded In this scenario the BRAS is Layer 3 aware and it has to be upgraded
to support IPv6. Since the BRAS terminates the PPP sessions it has to to support IPv6. Since the BRAS terminates the PPP sessions it has
support PPPoE with IPv6. The following devices have to be upgraded to to support PPPoE with IPv6. The following devices have to be
dual stack: Host, Customer Router (if present), BRAS and Edge Router. upgraded to dual stack: Host, Customer Router (if present), BRAS and
Edge Router.
8.2.2.2 Addressing 8.2.2.2 Addressing
The BRAS terminates the PPP sessions and provides the subscriber with The BRAS terminates the PPP sessions and provides the subscriber with
an IPv6 address from the defined pool for that profile. The an IPv6 address from the defined pool for that profile. The
subscriber profile for authorization and authentication can be subscriber profile for authorization and authentication can be
located on the BRAS or on a AAA server. The Hosts or the Customer located on the BRAS or on a AAA server. The Hosts or the Customer
Routers have the BRAS as their Layer 3 next hop. Routers have the BRAS as their Layer 3 next hop.
The PPP session can be initiated by a host or by a Customer Router. The PPP session can be initiated by a host or by a Customer Router.
skipping to change at page 44, line 35 skipping to change at page 50, line 43
The BRAS has a /64 prefix configured on the link facing the Edge The BRAS has a /64 prefix configured on the link facing the Edge
router. The Edge router links are also configured with /64 prefixes router. The Edge router links are also configured with /64 prefixes
to provide connectivity to the rest of the ISP network. to provide connectivity to the rest of the ISP network.
The prefixes used for subscriber and the ones delegated via DHCP-PD The prefixes used for subscriber and the ones delegated via DHCP-PD
should be planned in a manner that allows maximum summarization at should be planned in a manner that allows maximum summarization at
the BRAS. the BRAS.
Other information of interest to the host, such as DNS, is provided Other information of interest to the host, such as DNS, is provided
through stateful [RFC3315] and stateless [RFC3736] DHCPv6. through stateful [11] and stateless [10] DHCPv6.
8.2.2.3 Routing 8.2.2.3 Routing
The CPE devices are configured with a default route that points to The CPE devices are configured with a default route that points to
the BRAS router. No routing protocols are needed on these devices the BRAS router. No routing protocols are needed on these devices
which generally have limited resources. which generally have limited resources.
The BRAS runs an IGP to the Edge Router: OSPFv3 or IS-IS. Since the The BRAS runs an IGP to the Edge Router: OSPFv3 or IS-IS. Since the
addresses assigned to the PPP sessions are represented as connected addresses assigned to the PPP sessions are represented as connected
host routes, connected prefixes have to be redistributed. If DHCP-PD host routes, connected prefixes have to be redistributed. If DHCP-PD
is used, with every delegated prefix a static route is installed by is used, with every delegated prefix a static route is installed by
the BRAS. For this reason the static routes must also be the BRAS. For this reason the static routes must also be
redistributed. Prefix summarization should be done at the BRAS. redistributed. Prefix summarization should be done at the BRAS.
The Edge Router is running the IGP used in the ISP network: OSPFv3 The Edge Router is running the IGP used in the ISP network: OSPFv3 or
or IS-IS. A separation between the routing domains of the ISP and IS-IS. A separation between the routing domains of the ISP and the
the Access Provider is recommended if they are managed independently. Access Provider is recommended if they are managed independently.
Controlled redistribution will be needed between the Access Provider Controlled redistribution will be needed between the Access Provider
IGP and the ISP IGP. IGP and the ISP IGP.
8.2.3 L2TPv2 Access Aggregation (LAA) Model 8.2.3 L2TPv2 Access Aggregation (LAA) Model
In the LAA model the BRAS forwards the CPE initiated session to the In the LAA model the BRAS forwards the CPE initiated session to the
ISP over an L2TPv2 tunnel established between the BRAS and the Edge ISP over an L2TPv2 tunnel established between the BRAS and the Edge
Router. In this case the authentication, authorization and subscriber Router. In this case the authentication, authorization and
configuration are performed by the ISP itself. subscriber configuration are performed by the ISP itself.
Customer Premises NAP NSP | Customer Premises | | NAP | | NSP |
<--------------------> <----------------------> <----------------->
+-----------+ +----------+
| AAA | | AAA |
+------+ Radius | +-----+ Radius |
| | TACACS | | | TACACS |
| +-----+-----+ | +----+-----+
| | | |
+-----+ +-------+ +--------+ +--------+ +----+-----+ +-----------+ +-----+ +-------+ +--------+ +--------+ +----+----+ +----------+
|Hosts|--+Router +-+A Switch+-+ Switch +-+ BRAS +-+ Edge | C |Hosts|--+Router +-+A Switch+-+ Switch +-+ BRAS +-+ Edge | C
+-----+ +-------+ +--------+ +--------+ +----------+ | Router +=>O +-----+ +-------+ +--------+ +--------+ +---------+ | Router +=>O
| | R | | R
+-----------+ E +----------+ E
<-----------------------------------------------> |---------------------------------------------|
PPP PPP
<--------------> |------------|
L2TPv2 L2TPv2
Figure 8.2.3.1 Figure 8.2.3.1
8.2.3.1 IPv6 Related Infrastructure Changes 8.2.3.1 IPv6 Related Infrastructure Changes
In this scenario the BRAS is Layer 3 aware and it has to be upgraded In this scenario the BRAS is Layer 3 aware and it has to be upgraded
to support IPv6. The PPP sessions initiated by the subscriber are to support IPv6. The PPP sessions initiated by the subscriber are
forwarded over the L2TPv2 tunnel to the aggregation point in the ISP forwarded over the L2TPv2 tunnel to the aggregation point in the ISP
network. The BRAS (LAC) can aggregate IPv6 PPP sessions and tunnel network. The BRAS (LAC) can aggregate IPv6 PPP sessions and tunnel
them to the LNS using L2TPv2. The L2TPv2 tunnel between the LAC and them to the LNS using L2TPv2. The L2TPv2 tunnel between the LAC and
LNS could run over IPv6 or IPv4. These capabilities have to be LNS could run over IPv6 or IPv4. These capabilities have to be
skipping to change at page 45, line 56 skipping to change at page 52, line 17
The Edge router terminates the PPP sessions and provides the The Edge router terminates the PPP sessions and provides the
subscriber with an IPv6 address from the defined pool for that subscriber with an IPv6 address from the defined pool for that
profile. The subscriber profile for authorization and authentication profile. The subscriber profile for authorization and authentication
can be located on the Edge Router or on a AAA server. The Hosts or can be located on the Edge Router or on a AAA server. The Hosts or
the Customer Routers have the Edge Router as their Layer 3 next hop. the Customer Routers have the Edge Router as their Layer 3 next hop.
The PPP session can be initiated by a host or by a Customer Router. The PPP session can be initiated by a host or by a Customer Router.
In the latter case, once the session is established with the Edge In the latter case, once the session is established with the Edge
Router and an IPv6 address is assigned to the Customer Router by the Router and an IPv6 address is assigned to the Customer Router by the
Edge router, DHCP-PD can be used to acquire prefixes for the Customer Edge router, DHCP-PD can be used to acquire prefixes for the Customer
Router other interfaces. The Edge Router has to be enabled to support Router other interfaces. The Edge Router has to be enabled to
DHCP-PD and to relay the DHCPv6 requests of the hosts on the support DHCP-PD and to relay the DHCPv6 requests of the hosts on the
subscriber sites. Currently the DHCP-PD functionality cannot be subscriber sites. Currently the DHCP-PD functionality cannot be
implemented if the DHCP-PD server is not the Edge Router. If the implemented if the DHCP-PD server is not the Edge Router. If the
DHCP-PD messages are relayed, the Edge Router does not have a DHCP-PD messages are relayed, the Edge Router does not have a
mechanism to learn the assigned prefixes and thus install the proper mechanism to learn the assigned prefixes and thus install the proper
routes to make that prefix reachable. Work is being done to address routes to make that prefix reachable. Work is being done to address
this issue, one idea being to provide the Edge Router with a snooping this issue, one idea being to provide the Edge Router with a snooping
mechanism. The uplink to the ISP network is configured with a /64 mechanism. The uplink to the ISP network is configured with a /64
prefix as well. prefix as well.
The BRAS has a /64 prefix configured on the link to the Edge router. The BRAS has a /64 prefix configured on the link to the Edge router.
The Edge router links are also configured with /64 prefixes to The Edge router links are also configured with /64 prefixes to
provide connectivity to the rest of the ISP network. provide connectivity to the rest of the ISP network.
Other information of interest to the host, such as DNS, is provided Other information of interest to the host, such as DNS, is provided
through stateful [RFC3315] and stateless [RFC3736] DHCPv6. through stateful [11] and stateless [10] DHCPv6.
The address assignment and prefix summarization issues discussed in The address assignment and prefix summarization issues discussed in
section 7.2.3.2 are relevant in the same way for this media access section 7.2.3.2 are relevant in the same way for this media access
type as well. type as well.
8.2.3.3 Routing 8.2.3.3 Routing
The CPE devices are configured with a default route that points to The CPE devices are configured with a default route that points to
the Edge router that terminates the PPP sessions. No routing the Edge router that terminates the PPP sessions. No routing
protocols are needed on these devices which have limited protocols are needed on these devices which have limited resources.
resources.
The BRAS runs an IPv6 IGP to the Edge Router: OSPFv3 or IS-IS. The BRAS runs an IPv6 IGP to the Edge Router: OSPFv3 or IS-IS.
Different processes should be used if the NAP and the NSP are Different processes should be used if the NAP and the NSP are managed
managed by different organizations. In this case controlled by different organizations. In this case controlled redistribution
redistribution should be enabled between the two domains. should be enabled between the two domains.
The Edge Router is running the IPv6 IGP used in the ISP network: The Edge Router is running the IPv6 IGP used in the ISP network:
OSPFv3 or IS-IS. OSPFv3 or IS-IS.
8.2.4 Hybrid Model for IPv4 and IPv6 Service 8.2.4 Hybrid Model for IPv4 and IPv6 Service
It was recommended throughout this section that the IPv6 service It was recommended throughout this section that the IPv6 service
implementation should map the existent IPv4 one. This approach implementation should map the existent IPv4 one. This approach
simplifies manageability and minimizes training needed for personnel simplifies manageability and minimizes training needed for personnel
operating the network. In certain circumstances such mapping is not operating the network. In certain circumstances such mapping is not
feasible. This typically becomes the case when a Service Provider feasible. This typically becomes the case when a Service Provider
plans to expand its service offering with the new IPv6 deployed plans to expand its service offering with the new IPv6 deployed
infrastructure. If this new service is not well supported in a infrastructure. If this new service is not well supported in a
network design such as the one used for IPv4 then a different design network design such as the one used for IPv4 then a different design
might be used for IPv6. might be used for IPv6.
An example of such circumstances is that of a provider using an LAA An example of such circumstances is that of a provider using an LAA
design for its IPv4 services. In this case all the PPP sessions are design for its IPv4 services. In this case all the PPP sessions are
bundled and tunneled across the entire NAP infrastructure which is bundled and tunneled across the entire NAP infrastructure which is
made of multiple BRAS routers, aggregation routers etc. The end point made of multiple BRAS routers, aggregation routers etc. The end
of these tunnels is the ISP Edge Router. If the SP decides to offer point of these tunnels is the ISP Edge Router. If the SP decides to
multicast services over such a design, it will face the problem of offer multicast services over such a design, it will face the problem
NAP resources being over utilized. The multicast traffic can be of NAP resources being over utilized. The multicast traffic can be
replicated only at the end of the tunnels by the Edge router and the replicated only at the end of the tunnels by the Edge router and the
copies for all the subscribers are carried over the entire NAP. copies for all the subscribers are carried over the entire NAP.
A Modified Point-to-Point (see section 8.2.4.2) or a PTA model is A Modified Point-to-Point (see section 8.2.4.2) or a PTA model is
more suitable to support multicast services because the packet more suitable to support multicast services because the packet
replication can be done closer to the destination at the BRAS. replication can be done closer to the destination at the BRAS. Such
Such topology saves NAP resources. topology saves NAP resources.
In this sense IPv6 deployments can be viewed as an opportunity to In this sense IPv6 deployments can be viewed as an opportunity to
build an infrastructure that can better support the expansion of build an infrastructure that can better support the expansion of
services. In this case, an SP using the LAA design for its IPv4 services. In this case, an SP using the LAA design for its IPv4
services might choose a modified Point-to-Point or PTA design for services might choose a modified Point-to-Point or PTA design for
IPv6. IPv6.
8.2.4.1 IPv4 in LAA Model and IPv6 in PTA Model 8.2.4.1 IPv4 in LAA Model and IPv6 in PTA Model
The coexistence of the two PPP based models, PTA and LAA, is The coexistence of the two PPP based models, PTA and LAA, is
relatively straight forward. It is a straight forward overlap of the relatively straight forward. It is a straight forward overlap of the
two deployment models. The PPP sessions are terminated on two deployment models. The PPP sessions are terminated on different
different network devices for the IPv4 and IPv6 services. The PPP network devices for the IPv4 and IPv6 services. The PPP sessions
sessions for the existent IPv4 service deployed in an LAA model are for the existent IPv4 service deployed in an LAA model are terminated
terminated on the Edge Router. The PPP sessions for the new IPv6 on the Edge Router. The PPP sessions for the new IPv6 service
service deployed in a PTA model are terminated on the BRAS. deployed in a PTA model are terminated on the BRAS.
The logical design for IPv6 and IPv4 in this hybrid model is The logical design for IPv6 and IPv4 in this hybrid model is
presented in Figure 8.2.4.1. presented in Figure 8.2.4.1.
IPv6 <--------------------------> IPv6 |--------------------------|
PPP +-----------+ PPP +-----------+
| AAA | | AAA |
+-------+ Radius | +-------+ Radius |
| | TACACS | | | TACACS |
| +-----+-----+ | +-----+-----+
| | | |
+-----+ +-------+ +--------+ +----+-----+ +-----+-----+ +-----+ +-------+ +--------+ +----+-----+ +-----+-----+
|Hosts|--+Router +------+ Switch +-+ BRAS +-+ Edge | |Hosts|--+Router +------+ Switch +-+ BRAS +-+ Edge |
+-----+ +-------+ +--------+ +----------+ | Router +=>Core +-----+ +-------+ +--------+ +----------+ | Router +=>Core
+-----------+ +-----------+
IPv4 <----------------------------------------> IPv4 |----------------------------------------|
PPP PPP
<------------> |------------|
L2TPv2 L2TPv2
Figure 8.2.4.1 Figure 8.2.4.1
8.2.4.2 IPv4 in LAA Model and IPv6 in Modified Point-to-Point Model 8.2.4.2 IPv4 in LAA Model and IPv6 in Modified Point-to-Point Model
The coexistence of the modified Point-to-Point and the LAA models The coexistence of the modified Point-to-Point and the LAA models
implies a few specific changes. implies a few specific changes.
For the IPv4 service in LAA model, the VLANs are terminated on the For the IPv4 service in LAA model, the VLANs are terminated on the
BRAS and PPP sessions are terminated on the Edge Router (LNS). For BRAS and PPP sessions are terminated on the Edge Router (LNS). For
IPv6 service in Point-to-Point model, the VLANs are terminated at IPv6 service in Point-to-Point model, the VLANs are terminated at the
the Edge Router as described in section 7.2.1. In this hybrid model, Edge Router as described in section 7.2.1. In this hybrid model, the
the Point-to-Point link could be terminated on the BRAS, a NAP owned Point-to-Point link could be terminated on the BRAS, a NAP owned
device. The IPv6 traffic is then routed through the NAP network to device. The IPv6 traffic is then routed through the NAP network to
the NSP. In order to have this hybrid model, the BRAS has to be the NSP. In order to have this hybrid model, the BRAS has to be
upgraded to a dual-stack router. The functionalities of the Edge upgraded to a dual-stack router. The functionalities of the Edge
Router as described in section 7.2.1 are now implemented on the BRAS. Router as described in section 7.2.1 are now implemented on the BRAS.
The logical design for IPv6 and IPv4 in this hybrid model is The logical design for IPv6 and IPv4 in this hybrid model is in
in Figure 8.2.4.2. Figure 8.2.4.2.
IPv6 <----------------> IPv6 |----------------|
Ethernet Ethernet
+-----------+ +-----------+
| AAA | | AAA |
+-------+ Radius | +-------+ Radius |
| | TACACS | | | TACACS |
| +-----+-----+ | +-----+-----+
| | | |
+-----+ +-------+ +--------+ +----+-----+ +-----+-----+ +-----+ +-------+ +--------+ +----+-----+ +-----+-----+
|Hosts|--+Router +------+ Switch +-+ BRAS +-+ Edge | |Hosts|--+Router +------+ Switch +-+ BRAS +-+ Edge |
+-----+ +-------+ +--------+ +----------+ | Router +=>Core +-----+ +-------+ +--------+ +----------+ | Router +=>Core
+-----------+ +-----------+
IPv4 <----------------------------------------> IPv4 |----------------------------------------|
PPP PPP
<------------> |------------|
L2TPv2 L2TPv2
Figure 8.2.4.2 Figure 8.2.4.2
8.3 IPv6 Multicast 8.3 IPv6 Multicast
The typical multicast services offered for residential and very small The typical multicast services offered for residential and very small
businesses is video/audio streaming where the subscriber joins a businesses is video/audio streaming where the subscriber joins a
multicast group and receives the content. This type of service model multicast group and receives the content. This type of service model
is well supported through PIM-SSM which is very simple and easy to is well supported through PIM-SSM which is very simple and easy to
manage. PIM-SSM has to be enabled throughout the ISP network. MLDv2 manage. PIM-SSM has to be enabled throughout the ISP network. MLDv2
is required for PIM-SSM support. Vendors can choose to implement is required for PIM-SSM support. Vendors can choose to implement
skipping to change at page 47, line 102 skipping to change at page 55, line 36
businesses is video/audio streaming where the subscriber joins a businesses is video/audio streaming where the subscriber joins a
multicast group and receives the content. This type of service model multicast group and receives the content. This type of service model
is well supported through PIM-SSM which is very simple and easy to is well supported through PIM-SSM which is very simple and easy to
manage. PIM-SSM has to be enabled throughout the ISP network. MLDv2 manage. PIM-SSM has to be enabled throughout the ISP network. MLDv2
is required for PIM-SSM support. Vendors can choose to implement is required for PIM-SSM support. Vendors can choose to implement
features that allow routers to map MLDv1 group joins to predefined features that allow routers to map MLDv1 group joins to predefined
sources. sources.
Subscribers might use a set-top box that is responsible for the Subscribers might use a set-top box that is responsible for the
control piece of the multicast service (does group joins/leaves). control piece of the multicast service (does group joins/leaves).
The subscriber hosts can also join desired multicast groups as The subscriber hosts can also join desired multicast groups as long
long as they are enabled to support MLDv1 or MLDv2. If a customer as they are enabled to support MLDv1 or MLDv2. If a customer premise
premise router is used then it has to be enabled to support MLDv1 router is used then it has to be enabled to support MLDv1 and MLDv2
and MLDv2 in order to process the requests of the hosts. It has to in order to process the requests of the hosts. It has to be enabled
be enabled to support PIM-SSM in order to send PIM joins/leaves up to support PIM-SSM in order to send PIM joins/leaves up to its Layer
to its Layer 3 next hop whether it is the BRAS or the Edge router. 3 next hop whether it is the BRAS or the Edge router. When enabling
When enabling this functionality on a customer premises router, this functionality on a customer premises router, its limited
its limited resources should be taken into consideration. Another resources should be taken into consideration. Another option would
option would be for the customer premises router to support MLD be for the customer premises router to support MLD proxy routing.
proxy routing. MLD snooping or similar layer two multicast related MLD snooping or similar layer two multicast related protocols could
protocols could be enabled on the NAP switches. be enabled on the NAP switches.
The router that is the Layer 3 next hop for the subscriber (BRAS in The router that is the Layer 3 next hop for the subscriber (BRAS in
the PTA model or the Edge router in the LAA and Point-to-Point model) the PTA model or the Edge router in the LAA and Point-to-Point model)
has to be enabled to support MLDv1 and MLDv2 in order to process the has to be enabled to support MLDv1 and MLDv2 in order to process the
requests coming from subscribers without customer premises routers. requests coming from subscribers without customer premises routers.
It has to be enabled for PIM-SSM in order to receive joins/leaves It has to be enabled for PIM-SSM in order to receive joins/leaves
from customer routers and send joins/leaves to the next hop towards from customer routers and send joins/leaves to the next hop towards
the multicast source (Edge router or the NSP core). the multicast source (Edge router or the NSP core).
MLD authentication, authorization and accounting is usually MLD authentication, authorization and accounting is usually
configured on the edge router in order to enable the ISP to do configured on the edge router in order to enable the ISP to do
control the subscriber access of the service and do billing for the control the subscriber access of the service and do billing for the
content provided. Alternative mechanisms that would support these content provided. Alternative mechanisms that would support these
functions should be investigated further. functions should be investigated further.
skipping to change at page 49, line ? skipping to change at page 56, line 31
model or the Edge router in the LAA and Point-to-Point model) in model or the Edge router in the LAA and Point-to-Point model) in
order to manage resources shared amongst multiple subscribers order to manage resources shared amongst multiple subscribers
possibly with various service level agreements. possibly with various service level agreements.
On the BRAS or the Edge Router the subscriber facing interfaces have On the BRAS or the Edge Router the subscriber facing interfaces have
to be configured to police the inbound customer traffic and shape the to be configured to police the inbound customer traffic and shape the
traffic outbound to the customer based on the SLAs. Traffic traffic outbound to the customer based on the SLAs. Traffic
classification and marking should also be done on the router closest classification and marking should also be done on the router closest
(at Layer 3) to the subscriber in order to support the various types (at Layer 3) to the subscriber in order to support the various types
of customer traffic: data, voice, video and to optimally use the of customer traffic: data, voice, video and to optimally use the
network resources. This infrastructure offers a very good opportunity network resources. This infrastructure offers a very good
to leverage the QoS capabilities of Layer two devices. DiffServ based opportunity to leverage the QoS capabilities of Layer two devices.
QoS used for IPv4 should be expanded to IPv6. DiffServ based QoS used for IPv4 should be expanded to IPv6.
Each provider (NAP, NSP) could implement their own QoS policies and Each provider (NAP, NSP) could implement their own QoS policies and
services so reclassification and marking might be performed at the services so reclassification and marking might be performed at the
boundary between the NAP and the NSP in order to make sure the boundary between the NAP and the NSP in order to make sure the
traffic is properly handled by the ISP. The same IPv4 QoS concepts traffic is properly handled by the ISP. The same IPv4 QoS concepts
and methodologies should be applied for the IPv6 as well. and methodologies should be applied for the IPv6 as well.
It is important to note that when traffic is encrypted end-to-end, It is important to note that when traffic is encrypted end-to-end,
the traversed network devices will not have access to many of the the traversed network devices will not have access to many of the
packet fields used for classification purposes. In these cases packet fields used for classification purposes. In these cases
routers will most likely place the packets in the default classes. routers will most likely place the packets in the default classes.
The QoS design should take into consideration this scenario and try The QoS design should take into consideration this scenario and try
to use mainly IP header fields for classification purposes. to use mainly IP header fields for classification purposes.
8.5 IPv6 Security Considerations 8.5 IPv6 Security Considerations
There are limited changes that have to be done for CPEs in order to There are limited changes that have to be done for CPEs in order to
enhance security. The Privacy extensions [RFC3041] for enhance security. The Privacy extensions [14] for autoconfiguration
autoconfiguration should be used by the hosts with the same should be used by the hosts with the same considerations for host
considerations for host traceability as discussed in section 7.5. traceability as discussed in section 7.5. IPv6 firewall functions
IPv6 firewall functions should be enabled on the hosts or customer should be enabled on the hosts or customer premises router if
premises router if present. present.
The ISP provides security against attacks that come form its own The ISP provides security against attacks that come form its own
subscribers but it could also implement security services that subscribers but it could also implement security services that
protect its subscribers from attacks sourced from the outside of its protect its subscribers from attacks sourced from the outside of its
network. Such services do not apply at the access level of the network. Such services do not apply at the access level of the
network discussed here. network discussed here.
If any layer two filters for Ethertypes are in place, the NAP must If any layer two filters for Ethertypes are in place, the NAP must
permit the IPv6 Ethertype (0X86DD). permit the IPv6 Ethertype (0X86DD).
The device that is the Layer 3 next hop for the subscribers (BRAS The device that is the Layer 3 next hop for the subscribers (BRAS
Edge router) should protect the network and the other subscribers Edge router) should protect the network and the other subscribers
against attacks by one of the provider customers. For this reason against attacks by one of the provider customers. For this reason
uRPF and ACLs should be used on all interfaces facing subscribers. uRPF and ACLs should be used on all interfaces facing subscribers.
Filtering should be implemented with regard for the operational Filtering should be implemented with regard for the operational
skipping to change at page 50, line 29 skipping to change at page 57, line 22
network discussed here. network discussed here.
If any layer two filters for Ethertypes are in place, the NAP must If any layer two filters for Ethertypes are in place, the NAP must
permit the IPv6 Ethertype (0X86DD). permit the IPv6 Ethertype (0X86DD).
The device that is the Layer 3 next hop for the subscribers (BRAS The device that is the Layer 3 next hop for the subscribers (BRAS
Edge router) should protect the network and the other subscribers Edge router) should protect the network and the other subscribers
against attacks by one of the provider customers. For this reason against attacks by one of the provider customers. For this reason
uRPF and ACLs should be used on all interfaces facing subscribers. uRPF and ACLs should be used on all interfaces facing subscribers.
Filtering should be implemented with regard for the operational Filtering should be implemented with regard for the operational
requirements of IPv6 [Security considerations for IPv6]. requirements of IPv6 [36].
Authentication and authorization should be used wherever possible. Authentication and authorization should be used wherever possible.
The BRAS and the Edge Router should protect their processing The BRAS and the Edge Router should protect their processing
resources against floods of valid customer control traffic such as: resources against floods of valid customer control traffic such as:
Router and Neighbor Solicitations, MLD Requests. Rate limiting Router and Neighbor Solicitations, MLD Requests. Rate limiting
should be implemented on all subscriber facing interfaces. The should be implemented on all subscriber facing interfaces. The
emphasis should be placed on multicast type traffic as it is most emphasis should be placed on multicast type traffic as it is most
often used by the IPv6 control plane. often used by the IPv6 control plane.
All other security features used with the IPv4 service should be All other security features used with the IPv4 service should be
similarly applied to IPv6 as well. similarly applied to IPv6 as well.
8.6 IPv6 Network Management 8.6 IPv6 Network Management
The necessary instrumentation (such as MIBs, NetFlow Records etc) The necessary instrumentation (such as MIBs, NetFlow Records etc)
should be available for IPv6. should be available for IPv6.
Usually, NSPs manage the edge routers by SNMP. The SNMP transport can Usually, NSPs manage the edge routers by SNMP. The SNMP transport
be done over IPv4 if all managed devices have connectivity over both can be done over IPv4 if all managed devices have connectivity over
IPv4 and IPv6. This would imply the smallest changes to the existent both IPv4 and IPv6. This would imply the smallest changes to the
network management practices and processes. Transport over IPv6 could existent network management practices and processes. Transport over
also be implemented and it might become necessary if IPv6 only IPv6 could also be implemented and it might become necessary if IPv6
islands are present in the network. The management stations are only islands are present in the network. The management stations are
located on the core network. Network Management Applications should located on the core network. Network Management Applications should
handle IPv6 in a similar fashion to IPv4 however they should also handle IPv6 in a similar fashion to IPv4 however they should also
support features specific to IPv6 such as Neighbor monitoring. support features specific to IPv6 such as Neighbor monitoring.
In some cases service providers manage equipment located on customers In some cases service providers manage equipment located on customers
LANs. LANs.
9. Wireless LAN 9. Wireless LAN
This section provides detailed description of IPv6 deployment and This section provides detailed description of IPv6 deployment and
skipping to change at page 51, line 25 skipping to change at page 58, line 23
WLAN enables subscribers to connect to the Internet from various WLAN enables subscribers to connect to the Internet from various
locations without the restriction of staying indoors. WLAN is locations without the restriction of staying indoors. WLAN is
standardized by IEEE 802.11a/b/g. Consideration should be also given standardized by IEEE 802.11a/b/g. Consideration should be also given
to IEEE 802.16 WiMAX for similar deployment approaches. IEEE 802.11 to IEEE 802.16 WiMAX for similar deployment approaches. IEEE 802.11
offers maximum transmission speed from 1 or 2 Mbps, IEEE 802.11b offers maximum transmission speed from 1 or 2 Mbps, IEEE 802.11b
offers 11 Mbps and IEEE 802.11a offers up to 54 Mbps. offers 11 Mbps and IEEE 802.11a offers up to 54 Mbps.
Figure 9.1 describes the current WLAN architecture. Figure 9.1 describes the current WLAN architecture.
Customer Premises| Access Provider |Service Provider Customer | Access Provider | Service Provider
| | Premise | |
+------+ +--+ +--------------+ +----------+ +------+ +------+ +--+ +--------------+ +----------+ +------+
|WLAN | ---- | | |Access Router/| |Underlying| |Edge | |WLAN | ---- | | |Access Router/| |Underlying| |Edge |
|Host/ |-(WLAN)-|AP|-|Layer 2 Switch|-|Technology|-|Router|=>SP |Host/ |-(WLAN)-|AP|-|Layer 2 Switch|-|Technology|-|Router|=>SP
|Router| ---- | | | | | | | | Network |Router| ---- | | | | | | | | Network
+------+ +--+ +--------------+ +----------+ +------+ +------+ +--+ +--------------+ +----------+ +------+
| |
+------+ +------+
|AAA | |AAA |
|Server| |Server|
Figure 9.1 +------+ +------+
Figure 9.1
The host should have a wireless network interface card (NIC) in order The host should have a wireless network interface card (NIC) in order
to connect to a WLAN network. WLAN is a flat broadcast network and to connect to a WLAN network. WLAN is a flat broadcast network and
works in a similar fashion as Ethernet. When hosts initiate a works in a similar fashion as Ethernet. When hosts initiate a
connection, it is authenticated by the AAA server located at the connection, it is authenticated by the AAA server located at the SP
SP network. All the authentication parameters (username, password network. All the authentication parameters (username, password and
and etc.) are forwarded by the Access Point (AP) to the AAA server. etc.) are forwarded by the Access Point (AP) to the AAA server. The
The AAA server authenticates the host, once authenticated AAA server authenticates the host, once successfully authenticated
successfully the host can send data packets. The AP is located near the host can send data packets. The AP is located near the host and
the host and acts as a bridge. The AP forwards all the packets acts as a bridge. The AP forwards all the packets coming to/from
coming to/from host to the Edge Router. The underlying connection host to the Edge Router. The underlying connection between the AP
between the AP and Edge Router could be based on any access layer and Edge Router could be based on any access layer technology such as
technology such as HFC/Cable, FTTH, xDSL or etc. HFC/Cable, FTTH, xDSL or etc.
WLANs are based in limited areas known as WiFi Hot Spots. While users WLANs are based in limited areas known as WiFi Hot Spots. While
are present in the area covered by the WLAN range, they can be users are present in the area covered by the WLAN range, they can be
connected to the Internet given they have a wireless NIC and required connected to the Internet given they have a wireless NIC and required
configuration settings in their devices (notebook PCs, PDA or etc.). configuration settings in their devices (notebook PCs, PDA or etc.).
Once the user initiates the connection the IP address is assigned by Once the user initiates the connection the IP address is assigned by
the SP using DHCPv4. In most of the cases SP assigns limited the SP using DHCPv4. In most of the cases SP assigns limited number
number of public IP addresses to the its customer. When the user of public IP addresses to the its customer. When the user
disconnects the connection and move to a new WiFi hot spot, the above disconnects the connection and moves to a new WiFi hot spot, the
mentioned process of authentication, address assignment and accessing above mentioned process of authentication, address assignment and
the Internet is repeated. accessing the Internet is repeated.
There are IPv4 deployments where customers can use WLAN routers to There are IPv4 deployments where customers can use WLAN routers to
connect over wireless to their service provider. These deployment connect over wireless to their service provider. These deployment
types do not fit in the typical Hot Spot concept but they rather types do not fit in the typical Hot Spot concept but they rather
serve fixed customers. For this reason this section discusses the serve fixed customers. For this reason this section discusses the
WLAN router options as well. In this case, the ISP provides a public WLAN router options as well. In this case, the ISP provides a public
IP address and the WLAN Router assigns private addresses [RFC1918] IP address and the WLAN Router assigns private addresses [1] to all
to all WLAN users. The WLAN Router provides NAT functionality while WLAN users. The WLAN Router provides NAT functionality while WLAN
WLAN users access the Internet. users access the Internet.
While deploying IPv6 in the above mentioned WLAN architecture, there While deploying IPv6 in the above mentioned WLAN architecture, there
are three possible scenarios as discussed below. are three possible scenarios as discussed below.
A. Layer 2 Switch Between AP and Edge Router A. Layer 2 Switch Between AP and Edge Router
B. Access Router Between AP and Edge Router B. Access Router Between AP and Edge Router
C. PPP Based Model C. PPP Based Model
9.1.1 Layer 2 Switch Between AP and Edge Router 9.1.1 Layer 2 Switch Between AP and Edge Router
When a Layer 2 switch is present between AP and Edge Router, the AP When a Layer 2 switch is present between AP and Edge Router, the AP
and Layer 2 switch continues to work as a bridge, forwarding IPv4 and Layer 2 switch continues to work as a bridge, forwarding IPv4 and
and IPv6 packets from WLAN Host/Router to Edge Router and vice IPv6 packets from WLAN Host/Router to Edge Router and vice versa.
versa.
When initiating the connection, the WLAN host is authenticated by the When initiating the connection, the WLAN host is authenticated by the
AAA server located at the SP network. All the parameters related to AAA server located at the SP network. All the parameters related to
authentication (username, password and etc.) are forwarded by the AP authentication (username, password and etc.) are forwarded by the AP
to the AAA server. The AAA server authenticates the WLAN Hosts and to the AAA server. The AAA server authenticates the WLAN Hosts and
once authenticated and associated successfully with WLAN AP, IPv6 once authenticated and associated successfully with WLAN AP, IPv6
address will be acquired by the WLAN Host. Note the initiation and address will be acquired by the WLAN Host. Note the initiation and
authentication process is same as used in IPv4. authentication process is same as used in IPv4.
Figure 9.1.1 describes the WLAN architecture when Layer 2 Switch is Figure 9.1.1 describes the WLAN architecture when Layer 2 Switch is
located between AP and Edge Router. located between AP and Edge Router.
Customer Premises| Access Provider |Service Provider Customer | Access Provider | Service Provider
| | Premise | |
+------+ +--+ +--------------+ +----------+ +------+ +------+ +--+ +--------------+ +----------+ +------+
|WLAN | ---- | | | | |Underlying| |Edge | |WLAN | ---- | | | | |Underlying| |Edge |
|Host/ |-(WLAN)-|AP|-|Layer 2 Switch|-|Technology|-|Router|=>SP |Host/ |-(WLAN)-|AP|-|Layer 2 Switch|-|Technology|-|Router|=>SP
|Router| ---- | | | | | | | | Network |Router| ---- | | | | | | | | Network
+------+ +--+ +--------------+ +----------+ +------+ +------+ +--+ +--------------+ +----------+ +------+
| |
+------+ +------+
|AAA | |AAA |
|Server| |Server|
skipping to change at page 53, line 17 skipping to change at page 60, line 32
IPv6 will be deployed in this scenario by upgrading the following IPv6 will be deployed in this scenario by upgrading the following
devices to dual-stack: WLAN Host, WLAN Router (if present) and Edge devices to dual-stack: WLAN Host, WLAN Router (if present) and Edge
Router. Router.
9.1.1.2 Addressing 9.1.1.2 Addressing
When customer WLAN Router is not present, the WLAN Host has two When customer WLAN Router is not present, the WLAN Host has two
possible options to get an IPv6 address via the Edge Router. possible options to get an IPv6 address via the Edge Router.
A. The WLAN host can get the IPv6 address from Edge router using A. The WLAN host can get the IPv6 address from Edge router using
stateless auto-configuration [RFC2462]. All the hosts on the WLAN stateless auto-configuration [12]. All hosts on the WLAN belong to
belong to the same /64 subnet that is statically configured on the the same /64 subnet that is statically configured on the Edge Router.
Edge Router. The IPv6 WLAN Host may use stateless DHCPv6 for The IPv6 WLAN Host may use stateless DHCPv6 for obtaining other
obtaining other information of interest such as DNS and etc. information of interest such as DNS and etc.
B. IPv6 WLAN host can use DHCPv6 [RFC3315] to get a IPv6 address B. IPv6 WLAN host can use DHCPv6 [11] to get a IPv6 address from the
from the DHCPv6 server. In this case the DHCPv6 server would be DHCPv6 server. In this case the DHCPv6 server would be located in
located in the SP core network and Edge Router would act simply as the SP core network and Edge Router would simply act as a DHCP Relay
a DHCP Relay Agent. This option is similar to what we do today in Agent. This option is similar to what we do today in case of DHCPv4.
case of DHCPv4. It is important to note that host implementation of It is important to note that host implementation of stateful auto-
stateful auto-configuration is rather limited at this time and this configuration is rather limited at this time and this should be
should be considered if choosing this address assignment option. considered if choosing this address assignment option.
When a customer WLAN Router is present, the WLAN Host has two When a customer WLAN Router is present, the WLAN Host has two
possible options as well for acquiring IPv6 address. possible options as well for acquiring IPv6 address.
A. The WLAN Router may be assigned a prefix between /48 and /64 A. The WLAN Router may be assigned a prefix between /48 and /64 [8]
depending on the SP policy and customer requirements. If the WLAN depending on the SP policy and customer requirements. If the WLAN
Router has multiple networks connected to its interfaces, the network Router has multiple networks connected to its interfaces, the network
administrator will have to configure the /64 prefixes to the WLAN administrator will have to configure the /64 prefixes to the WLAN
Router interfaces connecting the WLAN Hosts on the customer site. Router interfaces connecting the WLAN Hosts on the customer site.
The WLAN Hosts connected to these interfaces can automatically The WLAN Hosts connected to these interfaces can automatically
configure themselves using stateless auto-configuration with /64 configure themselves using stateless auto-configuration with /64
prefix. prefix.
B. The WLAN Router can use its link-local address to communicate with B. The WLAN Router can use its link-local address to communicate with
the ER. It can also dynamically acquire through stateless the ER. It can also dynamically acquire through stateless
autoconfiguration the address for the link between itself and the ER. autoconfiguration the address for the link between itself and the ER.
This step is followed by a request via DHCP-PD for a prefix shorter This step is followed by a request via DHCP-PD for a prefix shorter
than /64 that in turn is divided in /64s and assigned to its than /64 that in turn is divided in /64s and assigned to its
interfaces connecting the hosts on the customer site. interfaces connecting the hosts on the customer site.
In this option, the WLAN Router would act as a requesting router and In this option, the WLAN Router would act as a requesting router and
Edge Router would act as delegating router. Once prefix is received Edge Router would act as delegating router. Once prefix is received
by the WLAN Router, it assigns /64 prefixes to each of its by the WLAN Router, it assigns /64 prefixes to each of its interfaces
interfaces connecting the WLAN Hosts on the customer site. The WLAN connecting the WLAN Hosts on the customer site. The WLAN Hosts
Hosts connected to these interfaces can automatically configure connected to these interfaces can automatically configure themselves
themselves using stateless auto-configuration with /64 prefix. using stateless auto-configuration with /64 prefix. Currently the
Currently the DHCP-PD functionality cannot be implemented if the DHCP-PD functionality cannot be implemented if the DHCP-PD server is
DHCP-PD server is not the ER. If the DHCP-PD messages are relayed, not the ER. If the DHCP-PD messages are relayed, the Edge Router
the Edge Router does not have a mechanism to learn the assigned does not have a mechanism to learn the assigned prefixes and thus
prefixes and thus install the proper routes to make that prefix install the proper routes to make that prefix reachable. Work is
reachable. Work is being done to address this issue, one idea being being done to address this issue, one idea being to provide the Edge
Router with a snooping mechanism. The uplink to the ISP network is
to provide the Edge Router with a snooping mechanism. The uplink to configured with a /64 prefix as well.
the ISP network is configured with a /64 prefix as well.
Usually it is easier for the SPs to stay with the DHCP PD and Usually it is easier for the SPs to stay with the DHCP PD and
stateless auto-configuration model and point the clients to a stateless auto-configuration model and point the clients to a central
central server for DNS/domain information, proxy configurations and server for DNS/domain information, proxy configurations and etc.
etc. Using this model the SP could change prefixes on the fly Using this model the SP could change prefixes on the fly and the WLAN
and the WLAN Router would simply pull the newest prefix based on the Router would simply pull the newest prefix based on the valid/
valid/preferred lifetime. preferred lifetime.
The prefixes used for subscriber links and the ones delegated via The prefixes used for subscriber links and the ones delegated via
DHCP-PD should be planned in a manner that allows maximum DHCP-PD should be planned in a manner that allows maximum
summarization as possible at the Edge Router. summarization as possible at the Edge Router.
Other information of interest to the host, such as DNS, is provided Other information of interest to the host, such as DNS, is provided
through stateful [RFC3315] and stateless [RFC3736] DHCPv6. through stateful [11] and stateless [10] DHCPv6.
9.1.1.3 Routing 9.1.1.3 Routing
The WLAN Host/Router are configured with a default route that points The WLAN Host/Router are configured with a default route that points
to the Edge router. No routing protocols are needed on these devices to the Edge router. No routing protocols are needed on these devices
which generally have limited resources. which generally have limited resources.
The Edge Router runs the IGP used in the SP network such as OSPFv3 The Edge Router runs the IGP used in the SP network such as OSPFv3 or
or IS-IS for IPv6. The connected prefixes have to be redistributed. IS-IS for IPv6. The connected prefixes have to be redistributed.
Prefix summarization should be done at the Edge Router. When DHCP-PD Prefix summarization should be done at the Edge Router. When DHCP-PD
is used, the IGP has to redistribute the static routes installed is used, the IGP has to redistribute the static routes installed
during the process of prefix delegation. during the process of prefix delegation.
9.1.2 Access Router Between AP and SP Edge Router 9.1.2 Access Router Between AP and SP Edge Router
When a Access Router is present between AP and Edge Router, the AP When a Access Router is present between AP and Edge Router, the AP
continues to work as a bridge, bridging IPv4 and IPv6 packets from continues to work as a bridge, bridging IPv4 and IPv6 packets from
WLAN Host/Router to Access/Edge Router and vice versa. The Access WLAN Host/Router to Access/Edge Router and vice versa. The Access
Router could be part of SP network or owned by a separate Access Router could be part of SP network or owned by a separate Access
Provider. Provider.
When WLAN Host initiates the connection, the AAA authentication and When WLAN Host initiates the connection, the AAA authentication and
association process with WLAN AP will be similar as explained in association process with WLAN AP will be similar as explained in
section 9.1.1. section 9.1.1.
Figure 9.1.2 describes the WLAN architecture when Access Router is Figure 9.1.2 describes the WLAN architecture when Access Router is
located between AP and Edge Router. located between AP and Edge Router.
Customer Premises| Access Provider |Service Provider Customer | Access Provider | Service Provider
| | Premise | |
+------+ +--+ +--------------+ +----------+ +------+ +------+ +--+ +--------------+ +----------+ +------+
|WLAN | ---- | | | | |Underlying| |Edge | |WLAN | ---- | | | | |Underlying| |Edge |
|Host/ |-(WLAN)-|AP|-|Access Router |-|Technology|-|Router|=>SP |Host/ |-(WLAN)-|AP|-|Access Router |-|Technology|-|Router|=>SP
|Router| ---- | | | | | | | | Network |Router| ---- | | | | | | | | Network
+------+ +--+ +--------------+ +----------+ +------+ +------+ +--+ +--------------+ +----------+ +------+
| |
+------+ +------+
|AAA | |AAA |
|Server| |Server|
+------+ +------+
Figure 9.1.2 Figure 9.1.2
9.1.2.1 IPv6 Related Infrastructure Changes 9.1.2.1 IPv6 Related Infrastructure Changes
IPv6 is deployed in this scenario by upgrading the following devices IPv6 is deployed in this scenario by upgrading the following devices
to dual-stack: WLAN Host, WLAN Router (if present), Access Router to dual-stack: WLAN Host, WLAN Router (if present), Access Router and
and Edge Router. Edge Router.
9.1.2.2 Addressing 9.1.2.2 Addressing
There are three possible options in this scenario for IPv6 address There are three possible options in this scenario for IPv6 address
assignment: assignment:
A. The Edge Router interface facing towards the Access Router is A. The Edge Router interface facing towards the Access Router is
statically configured with /64 prefix. The Access Router receives/ statically configured with /64 prefix. The Access Router receives/
configures an /64 prefix on its interface facing towards Edge configures an /64 prefix on its interface facing towards Edge Router
Router through stateless auto-configuration. The network through stateless auto-configuration. The network administrator will
administrator will have to configure the /64 prefixes to the Access have to configure the /64 prefixes to the Access Router interface
Router interface facing towards the customer premises. The WLAN facing towards the customer premises. The WLAN Host/Router connected
Host/Router connected to this interface can automatically configure to this interface can automatically configure themselves using
themselves using stateless auto-configuration with /64 prefix. stateless auto-configuration with /64 prefix.
B. This option uses DHCPv6 [RFC3315] for IPv6 prefix assignments to B. This option uses DHCPv6 [11] for IPv6 prefix assignments to the
the WLAN Host/Router. There is no use of DHCP PD or stateless WLAN Host/Router. There is no use of DHCP PD or stateless auto-
auto-configuration in this option. The DHCPv6 server can be located configuration in this option. The DHCPv6 server can be located on
on the Access Router, on the Edge Router or somewhere in the SP the Access Router, on the Edge Router or somewhere in the SP network.
network. In this case depending on where the DHCPv6 server is In this case depending on where the DHCPv6 server is located, Access
located, Access Router or the Edge Router would relay the DHCPv6 Router or the Edge Router would relay the DHCPv6 requests.
requests.
C. It can use its link-local address to communicate with the ER. C. It can use its link-local address to communicate with the ER. It
It can also dynamically acquire through stateless autoconfiguration can also dynamically acquire through stateless autoconfiguration the
the address for the link between itself and the ER. This step is address for the link between itself and the ER. This step is
followed by a request via DHCP-PD for a prefix shorter than /64 that followed by a request via DHCP-PD for a prefix shorter than /64 that
in turn is divided in /64s and assigned to its interfaces connecting in turn is divided in /64s and assigned to its interfaces connecting
the hosts on the customer site. the hosts on the customer site.
In this option, the Access Router would act as a requesting router In this option, the Access Router would act as a requesting router
and Edge Router would act as delegating router. Once prefix is and Edge Router would act as delegating router. Once prefix is
received by the Access Router, it assigns /64 prefixes to each of received by the Access Router, it assigns /64 prefixes to each of its
its interfaces connecting the WLAN Host/Router on customer site. The interfaces connecting the WLAN Host/Router on customer site. The
WLAN Host/Router connected to these interfaces can automatically WLAN Host/Router connected to these interfaces can automatically
configure themselves using stateless auto-configuration with /64 configure themselves using stateless auto-configuration with /64
prefix. Currently the DHCP-PD functionality cannot be implemented if prefix. Currently the DHCP-PD functionality cannot be implemented if
the DHCP-PD server is not the Edge Router. If the DHCP-PD messages the DHCP-PD server is not the Edge Router. If the DHCP-PD messages
are relayed, the Edge Router does not have a mechanism to learn the are relayed, the Edge Router does not have a mechanism to learn the
assigned prefixes and thus install the proper routes to make that assigned prefixes and thus install the proper routes to make that
prefix reachable. Work is being done to address this issue, one idea prefix reachable. Work is being done to address this issue, one idea
being to provide the Edge Router with a snooping mechanism. The being to provide the Edge Router with a snooping mechanism. The
uplink to the ISP network is configured with a /64 prefix as well. uplink to the ISP network is configured with a /64 prefix as well.
It is easier for the SPs to stay with the DHCP PD and stateless It is easier for the SPs to stay with the DHCP PD and stateless auto-
auto-configuration model and point the clients to a central configuration model and point the clients to a central server for
server for DNS/domain information, proxy configurations and others. DNS/domain information, proxy configurations and others. Using this
Using this model the provider could change prefixes on the fly and model the provider could change prefixes on the fly and the Access
the Access Router would simply pull the newest prefix based on the Router would simply pull the newest prefix based on the valid/
valid/preferred lifetime. preferred lifetime.
As mentioned before the prefixes used for subscriber links and the As mentioned before the prefixes used for subscriber links and the
ones delegated via DHCP-PD should be planned in a manner that ones delegated via DHCP-PD should be planned in a manner that allows
allows maximum summarization possible at the Edge Router. Other maximum summarization possible at the Edge Router. Other information
information of interest to the host, such as DNS, is provided of interest to the host, such as DNS, is provided through stateful
through stateful [RFC3315] and stateless [RFC3736] DHCPv6. [11] and stateless [10] DHCPv6.
9.1.2.3 Routing 9.1.2.3 Routing
The WLAN Host/Router are configured with a default route that points The WLAN Host/Router are configured with a default route that points
to the Access Router. No routing protocols are needed on these to the Access Router. No routing protocols are needed on these
devices which generally have limited resources. devices which generally have limited resources.
If the Access Router is owned by an Access Provider, then the Access If the Access Router is owned by an Access Provider, then the Access
Router can have a default route, pointing towards the SP Edge Router can have a default route, pointing towards the SP Edge Router.
Router. The Edge Router runs the IGP used in the SP network such as The Edge Router runs the IGP used in the SP network such as OSPFv3 or
OSPFv3 or IS-IS for IPv6. The connected prefixes have to be IS-IS for IPv6. The connected prefixes have to be redistributed. If
redistributed. If DHCP-PD is used, with every delegated prefix a DHCP-PD is used, with every delegated prefix a static route is
static route is installed by the Edge Router. For this reason the installed by the Edge Router. For this reason the static routes must
static routes must be redistributed. Prefix summarization should be be redistributed. Prefix summarization should be done at the Edge
done at the Edge Router. Router.
If the Access Router is owned by the SP, then Access Router will also If the Access Router is owned by the SP, then Access Router will also
run IPv6 IGP and will be part of SP IPv6 routing domain (OSPFv3 run IPv6 IGP and will be part of SP IPv6 routing domain (OSPFv3 or
or IS-IS). The connected prefixes have to be redistributed. If IS-IS). The connected prefixes have to be redistributed. If DHCP-PD
DHCP-PD is used, with every delegated prefix a static route is is used, with every delegated prefix a static route is installed by
installed by the Access Router. For this reason the static routes the Access Router. For this reason the static routes must be
must be redistributed. Prefix summarization should be done at the redistributed. Prefix summarization should be done at the Access
Access Router. Router.
9.1.3 PPP Based Model 9.1.3 PPP Based Model
PPP TERMINATED AGGREGATION (PTA) and L2TPv2 ACCESS AGGREGATION (LAA) PPP TERMINATED AGGREGATION (PTA) and L2TPv2 ACCESS AGGREGATION (LAA)
models as discussed in sections 7.2.2 and 7.2.3 respectively can models as discussed in sections 7.2.2 and 7.2.3 respectively can also
also be deployed in IPv6 WLAN environment. be deployed in IPv6 WLAN environment.
9.1.3.1 PTA Model in IPv6 WLAN Environment 9.1.3.1 PTA Model in IPv6 WLAN Environment
While deploying the PTA model in IPv6 WLAN environment the Access While deploying the PTA model in IPv6 WLAN environment the Access
Router is Layer3 aware and it has to be upgraded to support IPv6. Router is Layer3 aware and it has to be upgraded to support IPv6.
Since the Access Router terminates the PPP sessions initiated by Since the Access Router terminates the PPP sessions initiated by WLAN
WLAN Host/Router, it has to support PPPoE with IPv6. Host/Router, it has to support PPPoE with IPv6.
Figure 9.1.3.1 describes the PTA Model in IPv6 WLAN environment Figure 9.1.3.1 describes the PTA Model in IPv6 WLAN environment.
Customer Premises| Access Provider |Service Provider Customer | Access Provider | Service Provider
| | Premise | |
+------+ +--+ +--------------+ +----------+ +------+ +------+ +--+ +--------------+ +----------+ +------+
|WLAN | ---- | | | | |Underlying| |Edge | |WLAN | ---- | | | | |Underlying| |Edge |
|Host/ |-(WLAN)-|AP|-|Access Router |-|Technology|-|Router|=>SP |Host/ |-(WLAN)-|AP|-|Access Router |-|Technology|-|Router|=>SP
|Router| ---- | | | | | | | | Network |Router| ---- | | | | | | | | Network
+------+ +--+ +--------------+ +----------+ +------+ +------+ +--+ +--------------+ +----------+ +------+
| |
<---------------------------> +------+ |---------------------------| +------+
PPP |AAA | PPP |AAA |
|Server| |Server|
+------+ +------+
Figure 9.1.3.1 Figure 9.1.3.1
9.1.3.1.1 IPv6 Related Infrastructure Changes 9.1.3.1.1 IPv6 Related Infrastructure Changes
IPv6 is deployed in this scenario by upgrading the following IPv6 is deployed in this scenario by upgrading the following devices
devices to dual-stack: WLAN Host, WLAN Router (if present), to dual-stack: WLAN Host, WLAN Router (if present), Access Router and
Access Router and Edge Router. Edge Router.
9.1.3.1.2 Addressing 9.1.3.1.2 Addressing
The addressing techniques described in section 7.2.2.2 applies to The addressing techniques described in section 7.2.2.2 applies to
IPv6 WLAN PTA scenario as well. IPv6 WLAN PTA scenario as well.
9.1.3.1.3 Routing 9.1.3.1.3 Routing
The routing techniques described in section 7.2.2.3 applies to The routing techniques described in section 7.2.2.3 applies to IPv6
IPv6 WLAN PTA scenario as well. WLAN PTA scenario as well.
9.1.3.2 LAA Model in IPv6 WLAN Environment 9.1.3.2 LAA Model in IPv6 WLAN Environment
While deploying the LAA model in IPv6 WLAN environment the Access While deploying the LAA model in IPv6 WLAN environment the Access
Router is Layer3 aware and it has to be upgraded to support IPv6. Router is Layer3 aware and it has to be upgraded to support IPv6.
The PPP sessions initiated by WLAN Host/Router are forwarded over The PPP sessions initiated by WLAN Host/Router are forwarded over the
the L2TPv2 tunnel to the aggregation point in the SP network. The L2TPv2 tunnel to the aggregation point in the SP network. The Access
Access Router must have the capability to support L2TPv2 for IPv6. Router must have the capability to support L2TPv2 for IPv6.
Figure 9.1.3.2 describes the LAA Model in IPv6 WLAN environment Figure 9.1.3.2 describes the LAA Model in IPv6 WLAN environment
Customer | Access Provider | Service Provider
Customer Premises| Access Provider |Service Provider Premise | |
| |
+------+ +--+ +--------------+ +----------+ +------+ +------+ +--+ +--------------+ +----------+ +------+
|WLAN | ---- | | | | |Underlying| |Edge | |WLAN | ---- | | | | |Underlying| |Edge |
|Host/ |-(WLAN)-|AP|-|Access Router |-|Technology|-|Router|=>SP |Host/ |-(WLAN)-|AP|-|Access Router |-|Technology|-|Router|=>SP
|Router| ---- | | | | | | | | Network |Router| ---- | | | | | | | | Network
+------+ +--+ +--------------+ +----------+ +------+ +------+ +--+ +--------------+ +----------+ +------+
| |
<-------------------------------------------------->| |-------------------------------------------------- |
PPP | PPP |
<--------------------->| |--------------------- |
L2TPv2 | L2TPv2 |
+------+ +------+
|AAA | |AAA |
|Server| |Server|
+------+ +------+
Figure 9.1.3.2 Figure 9.1.3.2
9.1.3.2.1 IPv6 Related Infrastructure Changes 9.1.3.2.1 IPv6 Related Infrastructure Changes
IPv6 is deployed in this scenario by upgrading the following IPv6 is deployed in this scenario by upgrading the following devices
devices to dual-stack: WLAN Host, WLAN Router (if present), to dual-stack: WLAN Host, WLAN Router (if present), Access Router and
Access Router and Edge Router. Edge Router.
9.1.3.2.2 Addressing 9.1.3.2.2 Addressing
The addressing techniques described in section 7.2.3.2 applies to The addressing techniques described in section 7.2.3.2 applies to
IPv6 WLAN LAA scenario as well. IPv6 WLAN LAA scenario as well.
9.1.3.2.3 Routing 9.1.3.2.3 Routing
The routing techniques described in section 7.2.3.3 applies to The routing techniques described in section 7.2.3.3 applies to IPv6
IPv6 WLAN LAA scenario as well. WLAN LAA scenario as well.
9.2 IPv6 Multicast 9.2 IPv6 Multicast
The typical multicast services offered are video/audio streaming The typical multicast services offered are video/audio streaming
where the IPv6 WLAN Host joins a multicast group and receives the where the IPv6 WLAN Host joins a multicast group and receives the
content. This type of service model is well supported through content. This type of service model is well supported through PIM-
PIM-SSM which is enabled throughout the SP network. MLDv2 is required SSM which is enabled throughout the SP network. MLDv2 is required
for PIM-SSM support. Vendors can choose to implement features that for PIM-SSM support. Vendors can choose to implement features that
allow routers to map MLDv1 group joins to predefined sources. allow routers to map MLDv1 group joins to predefined sources.
It is important to note that in the shared wireless environments It is important to note that in the shared wireless environments
multicast can have a significant bandwidth impact. For this reason multicast can have a significant bandwidth impact. For this reason
the bandwidth allocated to multicast traffic should be limited and the bandwidth allocated to multicast traffic should be limited and
fixed based on the overall capacity of the wireless specification fixed based on the overall capacity of the wireless specification
used 802.11a, 802.11b or 802.11g. used 802.11a, 802.11b or 802.11g.
The IPv6 WLAN Hosts can also join desired multicast groups as The IPv6 WLAN Hosts can also join desired multicast groups as long as
long as they are enabled to support MLDv1 or MLDv2. If a they are enabled to support MLDv1 or MLDv2. If a WLAN/Access Routers
WLAN/Access Routers are used then they have to be enabled to are used then they have to be enabled to support MLDv1 and MLDv2 in
support MLDv1 and MLDv2 in order to process the requests of the order to process the requests of the IPv6 WLAN Hosts. The WLAN/
IPv6 WLAN Hosts. The WLAN/Access Router should also needs to be Access Router should also needs to be enabled to support PIM-SSM in
enabled to support PIM-SSM in order to send PIM joins up to the order to send PIM joins up to the Edge Router. When enabling this
Edge Router. When enabling this functionality on a WLAN/Access functionality on a WLAN/Access Router, its limited resources should
Router, its limited resources should be taken into consideration. be taken into consideration. Another option would be for the WLAN/
Another option would be for the WLAN/Access Router to support Access Router to support MLD proxy routing.
MLD proxy routing.
The Edge Router has to be enabled to support MLDv1 and MLDv2 in The Edge Router has to be enabled to support MLDv1 and MLDv2 in order
order to process the requests coming from IPv6 WLAN Host or to process the requests coming from IPv6 WLAN Host or WLAN/Access
WLAN/Access Router (if present). The Edge Router has also needs Router (if present). The Edge Router has also needs to be enabled
to be enabled for PIM-SSM in order to receive joins from IPv6 for PIM-SSM in order to receive joins from IPv6 WLAN Hosts or WLAN/
WLAN Hosts or WLAN/Access Router (if present) and send joins Access Router (if present) and send joins towards the SP core.
towards the SP core.
MLD authentication, authorization and accounting is usually MLD authentication, authorization and accounting is usually
configured on the Edge Router in order to enable the SP to do configured on the Edge Router in order to enable the SP to do billing
billing for the content services provided. Further investigation for the content services provided. Further investigation should be
should be made in investigating alternative mechanisms that would made in finding alternative mechanisms that would support these
support these functions. functions.
Concerns have been raised in the past related to running IPv6 Concerns have been raised in the past related to running IPv6
multicast over WLAN links. Potentially these are same kind of multicast over WLAN links. Potentially these are same kind of issues
issues when running any Layer3 protocol over a WLAN link that has a when running any Layer3 protocol over a WLAN link that has a high
high loss-to-signal ratio, where certain frames that are multicast loss-to-signal ratio, where certain frames that are multicast based
based are dropped when settings are not adjusted properly. For are dropped when settings are not adjusted properly. For instance
instance this behavior is similar to IGMP host membership report, this behavior is similar to IGMP host membership report, when done on
when done on a WLAN link with high loss-to-signal ratio and high a WLAN link with high loss-to-signal ratio and high interference.
interference.
This problem is inherited to WLAN that can impact both IPv4 and IPv6 This problem is inherited to WLAN that can impact both IPv4 and IPv6
multicast packets and not specific to IPv6 multicast. multicast packets and not specific to IPv6 multicast.
While deploying WLAN (IPv4 or IPv6), one should adjust their While deploying WLAN (IPv4 or IPv6), one should adjust their
broadcast/multicast settings if they are in danger of dropping broadcast/multicast settings if they are in danger of dropping
application dependent frames. These problems are usually caused when application dependent frames. These problems are usually caused when
AP are placed too far apart (not following the distance limitations), AP are placed too far apart (not following the distance limitations),
high interference and etc. These issues may impact a real multicast high interference and etc. These issues may impact a real multicast
application such as streaming video or basic operation of IPv6 if application such as streaming video or basic operation of IPv6 if the
the frames were dropped. Basic IPv6 communications uses functions frames were dropped. Basic IPv6 communications uses functions such
such as Duplicate Address Detection (DAD), Router and Neighbor as Duplicate Address Detection (DAD), Router and Neighbor
Solicitations (RS, NS), Router and Neighbor Advertisement (RA, NA) Solicitations (RS, NS), Router and Neighbor Advertisement (RA, NA)
and etc. which could be impacted by the above mentioned issues as and etc. which could be impacted by the above mentioned issues as
these frames are Layer 2 Ethernet multicast frames. these frames are Layer 2 Ethernet multicast frames.
Please refer to section 7.3 for more IPv6 multicast details. Please refer to section 7.3 for more IPv6 multicast details.
9.3 IPv6 QoS 9.3 IPv6 QoS
Today, QoS is done outside of the WiFi domain but it is Today, QoS is done outside of the WiFi domain but it is nevertheless
nevertheless important to the overall deployment. important to the overall deployment.
The QoS configuration is particularly relevant on the Edge Router in The QoS configuration is particularly relevant on the Edge Router in
order to manage resources shared amongst multiple subscribers order to manage resources shared amongst multiple subscribers
possibly with various service level agreements (SLA). Although, the possibly with various service level agreements (SLA). Although, the
WLAN Host/Router and Access Router could also be configured for QoS. WLAN Host/Router and Access Router could also be configured for QoS.
This includes support for IPv6 classifiers, so that data traffic This includes support for appropriate classification criteria which
to/from IPv6 WLAN Host/Router, Access Router and Edge Router can be
classified appropriately into different service flows (SF) and be
assigned appropriate priority. Appropriate classification criteria
would need to be implemented for IPv6 unicast and multicast traffic. would need to be implemented for IPv6 unicast and multicast traffic.
On the Edge Router the subscriber facing interfaces have to be On the Edge Router the subscriber facing interfaces have to be
configure to police the inbound customer traffic and shape the configured to police the inbound customer traffic and shape the
traffic outbound to the customer, based on the SLA. Traffic traffic outbound to the customer, based on the SLA. Traffic
classification and marking should also be done on the Edge router in classification and marking should also be done on the Edge router in
order to support the various types of customer traffic: data, voice, order to support the various types of customer traffic: data, voice,
video. The same IPv4 QoS concepts and methodologies should be applied video. The same IPv4 QoS concepts and methodologies should be
for the IPv6 as well. applied for the IPv6 as well.
It is important to note that when traffic is encrypted end-to-end, It is important to note that when traffic is encrypted end-to-end,
the traversed network devices will not have access to many of the the traversed network devices will not have access to many of the
packet fields used for classification purposes. In these cases packet fields used for classification purposes. In these cases
routers will most likely place the packets in the default classes. routers will most likely place the packets in the default classes.
The QoS design should take into consideration this scenario and try The QoS design should take into consideration this scenario and try
to use mainly IP header fields for classification purposes. to use mainly IP header fields for classification purposes.
9.4 IPv6 Security Considerations 9.4 IPv6 Security Considerations
There are limited changes that have to be done for WLAN Host/Router There are limited changes that have to be done for WLAN Host/Router
in order to enhance security. The Privacy extensions [RFC3041] for in order to enhance security. The Privacy extensions [14] for
autoconfiguration should be used by the hosts with the same autoconfiguration should be used by the hosts with the same
consideration for host traceability as described in section 7.5. consideration for host traceability as described in section 7.5.
IPv6 firewall functions should be enabled on the WLAN Host/Router if IPv6 firewall functions should be enabled on the WLAN Host/Router if
present. present.
The ISP provides security against attacks that come form its own The ISP provides security against attacks that come form its own
subscribers but it could also implement security services that subscribers but it could also implement security services that
protect its subscribers from attacks sourced from the outside of protect its subscribers from attacks sourced from the outside of its
its network. Such services do not apply at the access level of the network. Such services do not apply at the access level of the
network discussed here. network discussed here.
If the host authentication at hot spots is done using web based If the host authentication at hot spots is done using web based
authentication system then the level of security would depend on authentication system then the level of security would depend on the
the particular implementation. User credential should never be sent particular implementation. User credential should never be sent as
as clear text via HTTP. Secure HTTP (HTTPS) should be used between clear text via HTTP. Secure HTTP (HTTPS) should be used between the
the web browser and authentication server. The authentication web browser and authentication server. The authentication server
server could use RADIUS and LDAP services at the back end. could use RADIUS and LDAP services at the back end.
Authentication is an important aspect of securing WLAN networks Authentication is an important aspect of securing WLAN networks prior
prior to implementing Layer 3 security policies. This would help to implementing Layer 3 security policies. This would help for
for example avoid threats to the ND or stateless autoconfiguration example avoid threats to the ND or stateless autoconfiguration
processes. 802.1x provides the means to secure the network access processes. 802.1x provides the means to secure the network access
however, the many types of EAP (PEAP, EAP-TLS, EAP-TTLS, EAP-FAST, however, the many types of EAP (PEAP, EAP-TLS, EAP-TTLS, EAP-FAST,
LEAP) and the capabilities of the hosts to support some of the LEAP) and the capabilities of the hosts to support some of the
features might make it difficult to implement a comprehensive and features might make it difficult to implement a comprehensive and
consistent policy. consistent policy.
If any layer two filters for Ethertypes are in place, the NAP must If any layer two filters for Ethertypes are in place, the NAP must
permit the IPv6 Ethertype (0X86DD). permit the IPv6 Ethertype (0X86DD).
The device that is the Layer3 next hop for the subscribers The device that is the Layer3 next hop for the subscribers (Access or
(Access or Edge Router) should protect the network and the other Edge Router) should protect the network and the other subscribers
subscribers against attacks by one of the provider customers. against attacks by one of the provider customers. For this reason
For this reason uRPF and ACLs should be used on all interfaces uRPF and ACLs should be used on all interfaces facing subscribers.
facing subscribers. Filtering should be implemented with regard for Filtering should be implemented with regard for the operational
the operational requirements of IPv6 [Security considerations for requirements of IPv6 [Security considerations for IPv6].
IPv6]. Authentication and authorization should be used wherever Authentication and authorization should be used wherever possible.
possible.
The Access and the Edge Router should protect their processing The Access and the Edge Router should protect their processing
resources against floods of valid customer control traffic such as: resources against floods of valid customer control traffic such as:
RS, NS, MLD Requests. Rate limiting should be implemented on all RS, NS, MLD Requests. Rate limiting should be implemented on all
subscriber facing interfaces. The emphasis should be placed on subscriber facing interfaces. The emphasis should be placed on
multicast type traffic as it is most often used by the IPv6 control multicast type traffic as it is most often used by the IPv6 control
plane. plane.
9.5 IPv6 Network Management 9.5 IPv6 Network Management
The necessary instrumentation (such as MIBs, NetFlow Records, etc) The necessary instrumentation (such as MIBs, NetFlow Records, etc)
should be available for IPv6. should be available for IPv6.
Usually, NSPs manage the edge routers by SNMP. The SNMP transport can Usually, NSPs manage the edge routers by SNMP. The SNMP transport
be done over IPv4 if all managed devices have connectivity over both can be done over IPv4 if all managed devices have connectivity over
IPv4 and IPv6. This would imply the smallest changes to the existent both IPv4 and IPv6. This would imply the smallest changes to the
network management practices and processes. Transport over IPv6 could existent network management practices and processes. Transport over
also be implemented and it might become necessary if IPv6 only IPv6 could also be implemented and it might become necessary if IPv6
islands are present in the network. The management stations are only islands are present in the network. The management stations are
located on the core network. Network Management Applications should located on the core network. Network Management Applications should
handle IPv6 in a similar fashion to IPv4 however they should also handle IPv6 in a similar fashion to IPv4 however they should also
support features specific to IPv6 (such as Neighbor monitoring). support features specific to IPv6 (such as Neighbor monitoring).
In some cases service providers manage equipment located on customers In some cases service providers manage equipment located on customers
LANs. LANs.
10. Broadband Power Line Communications (PLC) 10. Broadband Power Line Communications (PLC)
This section describes the IPv6 deployment in Power Line This section describes the IPv6 deployment in Power Line
skipping to change at page 62, line 11 skipping to change at page 70, line 19
but it seems that this is the best model to follow. Lessons learnt but it seems that this is the best model to follow. Lessons learnt
from Cable, Ethernet and even WLAN access networks may be applicable from Cable, Ethernet and even WLAN access networks may be applicable
also. also.
Power Line Communications are also often called Broadband Power Line Power Line Communications are also often called Broadband Power Line
(BPL) and some times even Power Line Telecommunications (PLT). (BPL) and some times even Power Line Telecommunications (PLT).
PLC/BPL can be used for providing, with todays technology, up to PLC/BPL can be used for providing, with todays technology, up to
200Mbps (total, upstream+downstream) by means of the power grid. The 200Mbps (total, upstream+downstream) by means of the power grid. The
coverage is often the last half mile (typical distance from the coverage is often the last half mile (typical distance from the
Medium-to-Low Voltage transformer to the customer premise meter), Medium-to-Low Voltage transformer to the customer premise meter), and
and of course, as an in-home network (which is out of the scope of of course, as an in-home network (which is out of the scope of this
this document). document).
The bandwidth in a given PLC/BPL segment is shared among all the The bandwidth in a given PLC/BPL segment is shared among all the
customers connected to that segment (often the customers connected customers connected to that segment (often the customers connected to
to the same medium-to-low voltage transformer). The number of the same medium-to-low voltage transformer). The number of customers
customers can vary depending on different factors, such as distances can vary depending on different factors, such as distances and even
and even countries (from a few customers, just 5-6, up to 100-150). countries (from a few customers, just 5-6, up to 100-150).
PLC/BPL could also be used in the Medium Voltage network (often PLC/BPL could also be used in the Medium Voltage network (often
configured as Metropolitan Area Networks), but this is also out configured as Metropolitan Area Networks), but this is also out of
of the scope of this document, as it will be part of the core the scope of this document, as it will be part of the core network,
network, not the access one. not the access one.
Just for information/clarification, often the PLC/BPL access Just for information/clarification, often the PLC/BPL access networks
networks use hybrid layer 2 combinations either with PLC/BPL in the use hybrid layer 2 combinations either with PLC/BPL in the medium
medium voltage, point to point links, wireless links, satellite, voltage, point to point links, wireless links, satellite, etc., but
etc., but once more, this seems to be out of the scope of this once more, this seems to be out of the scope of this document, as
document, as those means are transparent, for the purpose of this those means are transparent, for the purpose of this document, to the
document, to the last half mile access network deployed with PLC/BPL. last half mile access network deployed with PLC/BPL.
10.1 PLC/BPL Access Network Elements 10.1 PLC/BPL Access Network Elements
This section describes the different elements commonly used in This section describes the different elements commonly used in PLC/
PLC/BPL access networks. BPL access networks.
Head End (HE): It is the router that connects the PLC/BPL access Head End (HE): It is the router that connects the PLC/BPL access
network (the power grid), located at the medium-to-low voltage network (the power grid), located at the medium-to-low voltage
transformer, to the core network. The HE PLC/BPL interface appears transformer, to the core network. The HE PLC/BPL interface appears
to each customer as a single virtual interface, all of them sharing to each customer as a single virtual interface, all of them sharing
the same physical media. the same physical media.
Repeater (RPT): It is the device which may be required in some Repeater (RPT): It is the device which may be required in some
circumstances to improve the signal on the PLC/BPL. This may be the circumstances to improve the signal on the PLC/BPL. This may be the
case if there are many customers in the same segment or building. case if there are many customers in the same segment or building.
Often is a bridge, but it could be also a router if for example Often is a bridge, but it could be also a router if for example there
there is a lot of peer-to-peer traffic in a building and due to the is a lot of peer-to-peer traffic in a building and due to the master-
master-slave nature of the PLC/BPL technology, is required to improve slave nature of the PLC/BPL technology, is required to improve the
the performance within that segment. For simplicity, in this performance within that segment. For simplicity, in this document,
document, it will be considered that the RPT is always a transparent it will be considered that the RPT is always a transparent layer 2
layer 2 bridge, so it may be present or not (from the layer 3 point bridge, so it may be present or not (from the layer 3 point of view).
of view).
Customer Premise Equipment (CPE): It is the modem (internal to the Customer Premise Equipment (CPE): It is the modem (internal to the
host), modem/bridge (BCPE), router (RCPE) or any combination among host), modem/bridge (BCPE), router (RCPE) or any combination among
those (i.e. modem+bridge/router), located at the customer premise. those (i.e. modem+bridge/router), located at the customer premise.
Edge Router (ER) Edge Router (ER)
Figure 10.1 depicts all the network elements indicated above Figure 10.1 depicts all the network elements indicated above
Customer Premises | Network Access Provider | Network Service Provider Customer Premises | Network Access Provider | Network Service Provider
skipping to change at page 63, line 19 skipping to change at page 71, line 31
Customer Premises | Network Access Provider | Network Service Provider Customer Premises | Network Access Provider | Network Service Provider
CP NAP NSP CP NAP NSP
+-----+ +------+ +-----+ +------+ +--------+ +-----+ +------+ +-----+ +------+ +--------+
|Hosts|--| RCPE |--| RPT |--------+ HE +---+ Edge | ISP |Hosts|--| RCPE |--| RPT |--------+ HE +---+ Edge | ISP
+-----+ +------+ +-----+ | | | Router +===> Network +-----+ +------+ +-----+ | | | Router +===> Network
+--+---+ +--------+ +--+---+ +--------+
+-----+ +------+ +-----+ | +-----+ +------+ +-----+ |
|Hosts|--| BCPE |--| RPT |-----------+ |Hosts|--| BCPE |--| RPT |-----------+
+-----+ +------+ +-----+ +-----+ +------+ +-----+
Figure 10.1 Figure 10.1
The logical topology and design of PLC/BPL is very similar to The logical topology and design of PLC/BPL is very similar to
Ethernet Broadband Networks as discussed in section 8. Ethernet Broadband Networks as discussed in Section 8.
10.2 Deploying IPv6 in IPv4 PLC/BPL 10.2 Deploying IPv6 in IPv4 PLC/BPL
The most simplistic and efficient model, considering the nature of The most simplistic and efficient model, considering the nature of
the PLC/BPL networks, is to see the network as a point-to-point one the PLC/BPL networks, is to see the network as a point-to-point one
to each customer. Even if several customers share the same physical to each customer. Even if several customers share the same physical
media, the traffic is not visible among them because each one uses media, the traffic is not visible among them because each one uses
different channels, which are in addition encrypted by means of 3DES. different channels, which are in addition encrypted by means of 3DES.
Furthermore, if required, VLANs could also be used, as already Furthermore, if required, VLANs could also be used, as already
described for the Ethernet case. described for the Ethernet case.
In order to maintain the deployment concepts and business models In order to maintain the deployment concepts and business models
proven and used with existing revenue generating IPv4 services, proven and used with existing revenue generating IPv4 services, the
the IPv6 deployment will match the IPv4 one. Under certain IPv6 deployment will match the IPv4 one. Under certain circumstances
circumstances where new service types or service needs justify it, where new service types or service needs justify it, IPv4 and IPv6
IPv4 and IPv6 network architectures could be different. Both network architectures could be different. Both approaches are very
approaches are very similar to those already described for the similar to those already described for the Ethernet case.
Ethernet case.
10.2.1 IPv6 Related Infrastructure Changes 10.2.1 IPv6 Related Infrastructure Changes
In this scenario the RPT is layer 3 unaware, but not the Head End, In this scenario the RPT is layer 3 unaware, but not the Head End,
which should be upgraded to support IPv6. Similarly other devices which should be upgraded to support IPv6. Similarly other devices
which have to be upgraded to dual stack: Hosts, RCPE and Edge Router. which have to be upgraded to dual stack: Hosts, RCPE and Edge Router.
10.2.2 Addressing 10.2.2 Addressing
The Hosts or the RCPEs have the HE as their Layer 3 next hop. The Hosts or the RCPEs have the HE as their Layer 3 next hop.
If there is no RCPE, but instead a BCPE all the hosts on the If there is no RCPE, but instead a BCPE all the hosts on the
subscriber site belong to the same /64 subnet that is statically subscriber site belong to the same /64 subnet that is statically
configured on the HE. The hosts can use stateless configured on the HE. The hosts can use stateless autoconfiguration
autoconfiguration or stateful DHCPv6 based configuration to or stateful DHCPv6 based configuration to acquire an address via the
acquire an address via the HE. HE.
If a RCPE is present: If a RCPE is present:
A. It is statically configured with an address on the /64 subnet A. It is statically configured with an address on the /64 subnet
between itself and the HE, and with /64 prefixes on the between itself and the HE, and with /64 prefixes on the interfaces
interfaces connecting the hosts on the customer site. This is not connecting the hosts on the customer site. This is not a desired
a desired provisioning method being expensive and difficult to provisioning method being expensive and difficult to manage.
manage.
B. It can use its link-local address to communicate with the HE. B. It can use its link-local address to communicate with the HE. It
It can also dynamically acquire through stateless can also dynamically acquire through stateless autoconfiguration the
autoconfiguration the address for the link between itself and address for the link between itself and the HE. This step is
the HE. This step is followed by a request via DHCP-PD for a followed by a request via DHCP-PD for a prefix shorter than /64
prefix shorter than /64 (typically /48) that in turn is divided (typically /48 [8]) that in turn is divided in /64s and assigned to
in /64s and assigned to its interfaces connecting the hosts on its interfaces connecting the hosts on the customer site. This
the customer site. This should be the preferred provisioning should be the preferred provisioning method, being cheaper and easier
method, being cheaper and easier to manage. to manage.
The Edge Router needs to have a prefix considering that each The Edge Router needs to have a prefix considering that each customer
customer in general will receive a /48 prefix, and that each HE in general will receive a /48 prefix, and that each HE will
will accommodate customers. Consequently each HE will require accommodate customers. Consequently each HE will require n x /48
n x /48 prefixes. prefixes.
It could be possible to use a kind of Hierarchical Prefix It could be possible to use a kind of Hierarchical Prefix Delegation
Delegation to automatically provision the required prefixes and to automatically provision the required prefixes and fully auto-
fully auto-configure the HEs, and consequently reduce the network configure the HEs, and consequently reduce the network setup,
setup, operation and maintenance cost. operation and maintenance cost.
The prefixes used for subscriber links and the ones delegated via The prefixes used for subscriber links and the ones delegated via
DHCP-PD should be planned in a manner that allows as much DHCP-PD should be planned in a manner that allows as much
summarization as possible at the Edge Router. summarization as possible at the Edge Router.
Other information of interest to the host, such as DNS, is provided Other information of interest to the host, such as DNS, is provided
through stateful [RFC3315] and stateless [RFC3736] DHCPv6. through stateful [11] and stateless [10] DHCPv6.
10.2.3 Routing 10.2.3 Routing
The HE are configured with a default route that points to If no routers are used on the custmer premises, the HE can simply be
the Edge Router. No routing protocols are needed on these devices configured with a default route that points to the Edge Router. If a
which generally have limited resources. router is used on the customer premises (RCPE) then the HE will run
an IGP to the ER such as OSPFv3, IS-IS or even RIPng. The connected
prefixes should be redistributed. If DHCP-PD is used, with every
delegated prefix a static route is installed by the HE. For this
reason the static routes must also be redistributed. Prefix
summarization should be done at the HE.
The RCPE requires only a default route pointing to the HE. No
routing protocols are needed on these devices which generally have
limited resources.
The Edge Router runs the IPv6 IGP used in the NSP: OSPFv3 or IS-IS. The Edge Router runs the IPv6 IGP used in the NSP: OSPFv3 or IS-IS.
The connected prefixes have to be redistributed. If DHCP-PD is used, The connected prefixes have to be redistributed as well as any RP
with every delegated prefix a static route is installed by the HE other than the ones used on the ER that might be used between the HE
For this reason the static routes must also be redistributed. and the ER.
Prefix summarization should be done at the HE.
10.3 IPv6 Multicast 10.3 IPv6 Multicast
The considerations regarding IPv6 Multicast for Ethernet are also The considerations regarding IPv6 Multicast for Ethernet are also
applicable here, in general, but assuming the nature of PLC/BPL applicable here, in general, but assuming the nature of PLC/BPL being
being a shared media. If a lot of Multicast is expected, it may be a shared media. If a lot of Multicast is expected, it may be worth
worth considering using RPT which are layer 3 aware. In that case, considering using RPT which are layer 3 aware. In that case, one
one extra layer of Hierarchical DHCP-PD could be considered, in extra layer of Hierarchical DHCP-PD could be considered, in order to
order to facilitate the deployment, operation and maintenance of facilitate the deployment, operation and maintenance of the network.
the network.
10.4 IPv6 QoS 10.4 IPv6 QoS
The considerations introduced for QoS in Ethernet are also The considerations introduced for QoS in Ethernet are also applicable
applicable here. PLC/BPL networks support QoS, which basically are here. PLC/BPL networks support QoS, which basically are no different
no different whether the transport is IPv4 or IPv6. It is necessary whether the transport is IPv4 or IPv6. It is necessary to understand
to understand that the specific network characteristics, such as the that the specific network characteristics, such as the variability
variability that may be introduced by electrical noise, towards which that may be introduced by electrical noise, towards which the PLC/BPL
the PLC/BPL network will automatically self-adapt. network will automatically self-adapt.
10.5 IPv6 Security Considerations 10.5 IPv6 Security Considerations
There are no differences in terms of security considerations if There are no differences in terms of security considerations if
compared with the Ethernet case. compared with the Ethernet case.
10.6 IPv6 Network Management 10.6 IPv6 Network Management
There are no differences in terms of network management if compared There are no differences in terms of network management if compared
with the already described Ethernet case. with the already described Ethernet case.
11. Gap Analysis 11. Gap Analysis
Several aspects of deploying IPv6 over SP Broadband networks were Several aspects of deploying IPv6 over SP Broadband networks were
highlighted in this document, aspects that require additional work highlighted in this document, aspects that require additional work in
in order to facilitate native deployments as summarized below: order to facilitate native deployments as summarized below:
A. As mentioned in section 6, changes will need to be made to the A. As mentioned in section 6, changes will need to be made to the
DOCSIS specification in order for SPs to deploy native IPv6 over DOCSIS specification in order for SPs to deploy native IPv6 over
cable networks. The CM and CMTS will both need to support IPv6 cable networks. The CM and CMTS will both need to support IPv6
natively in order to forward IPv6 unicast and multicast traffic. natively in order to forward IPv6 unicast and multicast traffic.
This is required for IPv6 Neighbor Discovery to work over DOCSIS This is required for IPv6 Neighbor Discovery to work over DOCSIS
cable networks. Additional classifiers need to be added to the cable networks. Additional classifiers need to be added to the
DOCSIS specification in order to classify IPv6 traffic at the CM DOCSIS specification in order to classify IPv6 traffic at the CM and
and CMTS in order to provide QoS. CMTS in order to provide QoS. These issues are addressed in a recent
proposal made to Cable Labs for DOCSIS 3.0 [31]
B. Currently the DHCP-PD functionality cannot be implemented if the B. Currently the DHCP-PD functionality cannot be implemented if the
DHCP-PD server is not the Edge Router. If the DHCP-PD messages are DHCP-PD server is not the Edge Router. If the DHCP-PD messages are
relayed, the Edge Router does not have a mechanism to learn the relayed, the Edge Router does not have a mechanism to learn the
assigned prefixes and thus install the proper routes to make that assigned prefixes and thus install the proper routes to make that
prefix reachable. Work needs to be done to address this issue, one prefix reachable. Work needs to be done to address this issue, one
idea being to provide the Edge Router with a snooping mechanism. The idea being to provide the Edge Router with a snooping mechanism. The
uplink to the ISP network is configured with a /64 prefix as well. uplink to the ISP network is configured with a /64 prefix as well.
C. Section 7 stated that current RBE based IPv4 deployment might not C. Section 7 stated that current RBE based IPv4 deployment might not
skipping to change at page 66, line 21 skipping to change at page 74, line 50
NBMA and the new feature should observe RFC2491 recommendations. NBMA and the new feature should observe RFC2491 recommendations.
D. Section 7 discussed the constraints imposed on a LAA based IPv6 D. Section 7 discussed the constraints imposed on a LAA based IPv6
deployment by the fact that it is expected that the subscribers keep deployment by the fact that it is expected that the subscribers keep
their assigned prefix regardless of LNS. A deployment approach was their assigned prefix regardless of LNS. A deployment approach was
proposed that would maintain the addressing schemes contiguous and proposed that would maintain the addressing schemes contiguous and
offers prefix summarization opportunities. The topic could be offers prefix summarization opportunities. The topic could be
further investigated for other solutions or improvements. further investigated for other solutions or improvements.
E. Sections 7 and 8 pointed out the limitations (previously E. Sections 7 and 8 pointed out the limitations (previously
documented in [IPv6 Multicast]) in deploying inter-domain ASM documented in [32]) in deploying inter-domain ASM however, SSM based
however, SSM based services seem more likely at this time. For such services seem more likely at this time. For such SSM based services
SSM based services of content delivery (video or Audio), mechanisms of content delivery (video or Audio), mechanisms are needed to
are needed to facilitate the billing and management of listeners. facilitate the billing and management of listeners. The currently
The currently available feature of MLD AAA is suggested however, available feature of MLD AAA is suggested however, other methods or
other methods or mechanisms might be developed and proposed. mechanisms might be developed and proposed.
F. In relation to section 9, concerns have been raised related to F. In relation to section 9, concerns have been raised related to
running IPv6 multicast over WLAN links. Potentially these are same running IPv6 multicast over WLAN links. Potentially these are same
kind of issue when running any Layer3 protocol over a WLAN link kind of issues when running any Layer3 protocol over a WLAN link that
that has a high loss-to-signal ratio, certain frames that are has a high loss-to-signal ratio, certain frames that are multicast
multicast based are dropped when settings are not adjusted based are dropped when settings are not adjusted properly. For
properly. For instance this behavior is similar to IGMP host instance this behavior is similar to IGMP host membership report,
membership report, when done on a WLAN link with high when done on a WLAN link with high loss-to-signal ratio and high
loss-to-signal ratio and high interference. This problem is interference. This problem is inherited to WLAN that can impact both
inherited to WLAN that can impact both IPv4 and IPv6 multicast IPv4 and IPv6 multicast packets and not specific to IPv6 multicast.
packets and not specific to IPv6 multicast.
G. The Privacy Extensions were mentioned as a popular means to G. The Privacy Extensions were mentioned as a popular means to
provide some form of host security. ISPs can track relatively provide some form of host security. ISPs can track relatively easily
easily the prefixes assigned to subscribers. If however the ISPs the prefixes assigned to subscribers. If however the ISPs are
are required by regulations to track their users at host address required by regulations to track their users at host address level,
level, the Privacy Extensions [RFC3041] can be implemented only in the Privacy Extensions [14] can be implemented only in parallel with
parallel with network management tools that could provide network management tools that could provide traceability of the
traceability of the hosts. Mechanisms should be defined to hosts. Mechanisms should be defined to implement this aspect of user
implement this aspect of user management. management.
H. Tunnels are an effective way to avoid deployment dependencies on H. Tunnels are an effective way to avoid deployment dependencies on
the IPv6 support on platforms that are out of the SP control (GWRs the IPv6 support on platforms that are out of the SP control (GWRs or
or CPEs) or over technologies that did not standardize the IPv6 CPEs) or over technologies that did not standardize the IPv6 support
support yet (cable). They can be used in the following ways: yet (cable). They can be used in the following ways:
i. Tunnels directly to the CPE or GWR with public or private IPv4 i. Tunnels directly to the CPE or GWR with public or private IPv4
addresses. addresses.
ii. Tunnels directly to hosts with public or private IPv4 addresses.
ii. Tunnels directly to hosts with public or private IPv4 addresses.
Recommendations on the exact tunneling mechanisms that can/should be Recommendations on the exact tunneling mechanisms that can/should be
used for last mile access need to be investigated further and should used for last mile access need to be investigated further and should
be covered in a future IETF draft. be covered in a future IETF draft.
I. Through its larger address space, IPv6 allows SPs to assign I. Through its larger address space, IPv6 allows SPs to assign fixed,
fixed, globally routable prefixes to the links connecting each globally routable prefixes to the links connecting each subscriber.
subscriber.
This approach changes the provisioning methodologies that were used This approach changes the provisioning methodologies that were used
for IPv4. Static configuration of the IPv6 addresses for all these for IPv4. Static configuration of the IPv6 addresses for all these
links on the Edge Routers or Access Routers might not be a scalable links on the Edge Routers or Access Routers might not be a scalable
option. New provisioning mechanisms or features might need to be option. New provisioning mechanisms or features might need to be
developed in order to deal with this issue. developed in order to deal with this issue.
J. New deployment models are emerging for the Layer 2 portion of the J. New deployment models are emerging for the Layer 2 portion of the
NAP where individual VLANs are not dedicated to each subscriber. This NAP where individual VLANs are not dedicated to each subscriber.
approach allows Layer 2 switches to aggregate more then 4096 users. This approach allows Layer 2 switches to aggregate more then 4096
MAC Forced Forwarding [MFF] is an example of such an implementation users. MAC Forced Forwarding [MFF] is an example of such an
where a broadcast domain is turned into a NBMA like environment by implementation where a broadcast domain is turned into a NBMA like
forwarding the frames based on both Source and Destination MAC environment by forwarding the frames based on both Source and
addresses. Since these models are being adopted by the field, the Destination MAC addresses. Since these models are being adopted by
implications of deploying IPv6 in such environments need to be the field, the implications of deploying IPv6 in such environments
further investigated. need to be further investigated.
The outcome of solutions to some of these topics ranges from making The outcome of solutions to some of these topics ranges from making a
a media access capable of supporting native IPv6 (cable) to media access capable of supporting native IPv6 (cable) to improving
improving operational aspects of native IPv6 deployments. operational aspects of native IPv6 deployments.
12. Contributors 12. IANA Considerations
We would like to thank Pekka Savola for his contribution, guidance This document requests no action by IANA.
and feedback in order to improve this document.
13. Acknowledgements 13. Security Considerations
We would like to thank Brian Carpenter, Patrick Grossetete, Toerless Please refer to the individual "IPv6 Security Considerations"
Eckert, Madhu Sudan, Shannon McFarland and Benoit Lourdelet for their technology sections for details.
valuable comments. The authors would like to acknowledge the
structure and information guidance provided by the work of Mickels et
al on Transition Scenarios for ISP Networks.
14. References 14. References
Normative References 14.1 Normative References
[RFC3053] [1] Rekhter, Y., Moskowitz, R., Karrenberg, D., Groot, G., and E.
Durand A., Fasano P., Guardini I., Lento D. "IPv6 Tunnel Broker", Lear, "Address Allocation for Private Internets", BCP 5,
RFC3053, January 2001. RFC 1918, February 1996.
[RFC3056] [2] Durand, A., Fasano, P., Guardini, I., and D. Lento, "IPv6
Carpenter B., Moore K., "Connection of IPv6 Domains via IPv4 Clouds", Tunnel Broker", RFC 3053, January 2001.
RFC3056, Aprilruary 2001.
[RFC2473] [3] Carpenter, B. and K. Moore, "Connection of IPv6 Domains via
Conta A., Deering S., "Generic Packet tunneling in IPv6 IPv4 Clouds", RFC 3056, February 2001.
Specification", December 1998.
[RFC2893] [4] Conta, A. and S. Deering, "Generic Packet Tunneling in IPv6
Gilligan R., Nordmark E., "Transition Mechanisms for IPv6 Hosts Specification", RFC 2473, December 1998.
and Routers", August 2000.
[RFC2529] [5] Gilligan, R. and E. Nordmark, "Transition Mechanisms for IPv6
Carpenter B., Jung C. "Transmission of IPv6 over IPv4 Domains Hosts and Routers", RFC 2893, August 2000.
without Explicit Tunnels", March 1999
[RFC3904] [6] Carpenter, B. and C. Jung, "Transmission of IPv6 over IPv4
Huitema C., Austein R., Satapati S., van der Pol R., "Evaluation Domains without Explicit Tunnels", RFC 2529, March 1999.
of IPv6 Transition Mechanisms for Unmanaged Networks", September 2000
[RFC3513] [7] Huitema, C., Austein, R., Satapati, S., and R. van der Pol,
R. Hinden and S. Deering, "IP Version 6 Addressing Architecture", "Evaluation of IPv6 Transition Mechanisms for Unmanaged
RFC3513, April 2003. Networks", RFC 3904, September 2004.
[RFC3736] [8] IAB and IESG, "IAB/IESG Recommendations on IPv6 Address
Droms, R., "Stateless Dynamic Host Configuration Protocol (DHCP) Allocations to Sites", RFC 3177, September 2001.
Service for IPv6", RFC3736, April 2004.
[RFC3315] [9] Hinden, R. and S. Deering, "Internet Protocol Version 6 (IPv6)
Droms, R., "Dynamic Host Configuration Protocol for IPv6 (DHCPv6)", Addressing Architecture", RFC 3513, April 2003.
RFC3315, July 2003.
[RFC2462] [10] Droms, R., "Stateless Dynamic Host Configuration Protocol
Thomson, S. and Narten, T., "IPv6 Stateless Address (DHCP) Service for IPv6", RFC 3736, April 2004.
[11] Droms, R., Bound, J., Volz, B., Lemon, T., Perkins, C., and M.
Carney, "Dynamic Host Configuration Protocol for IPv6
(DHCPv6)", RFC 3315, July 2003.
[12] Thomson, S. and T. Narten, "IPv6 Stateless Address
Autoconfiguration", RFC2462, December 1998. Autoconfiguration", RFC2462, December 1998.
[RFC3633] [13] Troan, O. and R. Droms, "IPv6 Prefix Options for Dynamic Host
Troan, O. and Droms, R., "IPv6 Prefix Options for Dynamic Host Configuration Protocol (DHCP) version 6", RFC 3633,
Configuration Protocol (DHCP) version 6", RFC3633, December 2003. December 2003.
[RFC3041] [14] Narten, T. and R. Draves, "Privacy Extensions for Stateless
T. Narten and R. Draves, "Privacy Extensions for Stateless Address Address Autoconfiguration in IPv6", RFC 3041, January 2001.
Autoconfiguration in IPv6," RFC3041, April 2001.
[RFC2516] [15] Mamakos, L., Lidl, K., Evarts, J., Carrel, D., Simone, D., and
Mamakos, L., "A Method for Transmitting PPP Over Ethernet (PPPoE)", R. Wheeler, "A Method for Transmitting PPP Over Ethernet
RFC2516, Aprilruary 1999. (PPPoE)", RFC 2516, February 1999.
[RFC2364] [16] Gross, G., Kaycee, M., Lin, A., Malis, A., and J. Stephens,
Gross, G., "PPP Over AAL5 (PPPoA)", RFC2516, July 1998. "PPP Over AAL5", RFC 2364, July 1998.
[RFC2472] [17] Haskin, D. and E. Allen, "IP Version 6 over PPP", RFC 2472,
Haskin, D. and Allen, E., "IP Version 6 over PPP", RFC2472,
December 1998. December 1998.
[RFC2461] [18] Narten, T., Nordmark, E., and W. Simpson, "Neighbor Discovery
Narten, T., Nordmark, E. and Simpson, W., "Neighbor Discovery for for IP Version 6 (IPv6)", RFC 2461, December 1998.
IP Version 6 (IPv6)", RFC2461, December 1998.
[RFC2770] [19] Meyer, D. and P. Lothberg, "GLOP Addressing in 233/8",
Meyer. D., "GLOP Addressing in 233/8", RFC2770, April 2000 RFC 2770, February 2000.
[RFC3646] [20] St. Johns, M., "DOCSIS Cable Device MIB Cable Device Management
Droms, R., "DNS Configuration options for Dynamic Host Information Base for DOCSIS compliant Cable Modems and Cable
Configuration Protocol for IPv6 (DHCPv6)", RFC3646, December 2003. Modem Termination Systems", RFC 2669, August 1999.
[RFC3618] [21] Droms, R., "DNS Configuration options for Dynamic Host
Fenner B., Meyer D., "Multicast Source Discovery Protocol (MSDP)", Configuration Protocol for IPv6 (DHCPv6)", RFC 3646,
RFC3618, October 2003 December 2003.
Informative References [22] Fenner, B. and D. Meyer, "Multicast Source Discovery Protocol
(MSDP)", RFC 3618, October 2003.
[Dual Stack Access] [23] Baker, F. and P. Savola, "Ingress Filtering for Multihomed
Shirasaki, et al., "A Model of IPv6/IPv4 Dual Stack Internet Access Networks", BCP 84, RFC 3704, March 2004.
Service", draft-shirasaki-dualstack-service-04.txt (work in
progress) ,April 2004.
[6PE] De Clercq J., et al., "Connecting IPv6 Islands across IPv4 [24] Johnson, D., Perkins, C., and J. Arkko, "Mobility Support in
Clouds with BGP:, draft-ooms-v6ops-bgp-tunnel-04.txt, October 2004 IPv6", RFC 3775, June 2004.
[ISP Networks IPv6 Scenarios] [25] Lind, M., Ksinant, V., Park, S., Baudot, A., and P. Savola,
Lind et, al., "Scenarios and Analysis for Introducing IPv6 into ISP "Scenarios and Analysis for Introducing IPv6 into ISP
Networks", RFC 4029, March 2005. Networks", RFC 4029, March 2005.
[ISATAP] 14.2 Informative References
Templin F., et al., "Intra-Site Automatic Tunnel Addressing Protocol
(ISATAP)", draft-ietf-ngtrans-isatap-12.txt, January 2003.
[Dynamic Tunnel] [26] Shirasaki, Y., Miyakawa, S., and A. Takenouchi, "A Model of
Palet J., et al., "Analysis of IPv6 Tunnel End-point Discovery IPv6/IPv4 Dual Stack Internet Access
Mechanisms", draft-palet-v6ops-tun-auto-disc-01.txt, June 2004. Service(draft-shirasaki-dualstack-service-04.txt)", April 2004.
[OPS] [27] De Clercq, J., Ooms, D., Prevost, S., and F. Le Faucheur,
Nordmark E., Gilligan R. E., "Basic Transition Mechanisms for "Connecting IPv6 Islands across IPv4 Clouds with
IPv6 Hosts and Routers", draft-ietf-v6ops-mech-v2-06.txt, BGP(draft-ooms-v6ops-bgp-tunnel-04.txt)", October 2004.
September 2004.
[DOCSIS 3.0 Proposal] [28] Templin, F., Gleeson, T., Talwar, M., and D. Thaler, "Intra-
Cisco Systems, "DOCSIS 3.0 Proposal", April 2005. Site Automatic Tunnel Addressing Protocol
(ISATAP)(draft-ietf-ngtrans-isatap-12.txt)", January 2003.
[IPv6 Multicast] [29] Palet, J., Diaz, M., and P. Savola, "Analysis of IPv6 Tunnel
Savola, P. "IPv6 Multicast Deployment Issues", End-point Discovery
draft-mboned-ipv6-multicast-issues, April 2004 Mechanisms(draft-palet-v6ops-tun-auto-disc-01.txt)", June 2004.
[RF Interface] [30] Nordmark, E. and R. Gilligan, "Basic Transition Mechanisms for
Cable Labs, "Radio Frequency Interface Specification IPv6 Hosts and Routers(draft-ietf-v6ops-mech-v2-06.txt)",
SP-RFIv2.0-I02-020617", Jun 2002. September 2004.
[BSR] [31] Cisco, Systems., "DOCSIS 3.0 Proposal", April 2005.
Nidhi Bhaskar et all., "Bootstrap Router (BSR) Mechanism for PIM",
draft-ietf-pim-sm-bsr-04.txt, January 2005
[Assisted Tunneling] [32] Savola, P., "IPv6 Multicast Deployment
A.Durand, F. Parent,"Requirements for assisted tunneling", Issues(draft-mboned-ipv6-multicast-issues.txt)", April 2004.
draft-ietf-v6ops-assisted-tunneling-requirements-00.txt, June 2004
[v6tc] [33] Cable, Labs., "Radio Frequency Interface Specification SP-
J. Pallet, et al., "Goals for Tunneling Configuration", RFIv2.0-I02-020617", June 2002.
draft-palet-v6tc-goals-tunneling-00.txt, August, 2005
[Security considerations for IPv6] [34] Bhaskar, N., Gall, A., and S. Venaas, "Bootstrap Router (BSR)
Sean Convery, Darrin Miller, "IPv6 and IPv4 Threat Comparison Mechanism for PIM(draft-ietf-pim-sm-bsr-04.txt)", January 2005.
and Best-Practice Evaluation"
Authors Addresses [35] Palet, J., Nielsent, K., Parent, F., Durand, A.,
Suryanarayanan, R., and P. Savola, "Goals for Tunneling
Configuration(draft-palet-v6tc-goals-tunneling-00.txt)",
August 2005.
[36] Convery, S. and D. Miller, "IPv6 and IPv4 Threat Comparison and
Best-Practice Evaluation", March 2004.
Authors' Addresses
Salman Asadullah Salman Asadullah
Cisco Systems, Inc. Cisco Systems
170 West Tasman Drive, 170 West Tasman Drive
San Jose, CA 95134, USA San Jose, CA 95134
USA
Phone: 408 526 8982 Phone: 408 526 8982
Email: sasad@cisco.com Email: sasad@cisco.com
Adeel Ahmed Adeel Ahmed
Cisco Systems, Inc. Cisco Systems
2200 East President George Bush Turnpike, 2200 East President George Bush Turnpike
Richardson, TX 75082, USA Richardson, TX 75082
USA
Phone: 469 255 4122 Phone: 469 255 4122
Email: adahmed@cisco.com Email: adahmed@cisco.com
Ciprian Popoviciu Ciprian Popoviciu
Cisco Systems, Inc. Cisco Systems
7025-6 Kit Creek Road, 7025-6 Kit Creek Road
Research Triangle Park, NC 27709, USA Research Triangle Park, NC 27709
USA
Phone: 919 392 3723 Phone: 919 392 3723
Email: cpopovic@cisco.com Email: cpopovic@cisco.com
Jordi Palet Martinez Jordi Palet Martinez
Consulintel Consulintel
San Jose Artesano, 1 San Jose Artesano, 1
Alcobendas - Madrid Alcobendas, Madrid E-28108
E-28108 - Spain Spain
Phone: +34 91 151 81 99 Phone: +34 91 151 81 99
Fax: +34 91 151 81 98
Email: jordi.palet@consulintel.es Email: jordi.palet@consulintel.es
Intellectual Property Statement Intellectual Property Statement
The IETF takes no position regarding the validity or scope of any The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed Intellectual Property Rights or other rights that might be claimed to
to pertain to the implementation or use of the technology describe pertain to the implementation or use of the technology described in
in this document or the extent to which any license under such this document or the extent to which any license under such rights
rights might or might not be available; nor does it represent that might or might not be available; nor does it represent that it has
it has made any independent effort to identify any such rights. made any independent effort to identify any such rights. Information
Information on the procedures with respect to rights in RFC on the procedures with respect to rights in RFC documents can be
documents can be found in BCP 78 and BCP 79. found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use attempt made to obtain a general license or permission for the use of
of such proprietary rights by implementers or users of this such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository specification can be obtained from the IETF on-line IPR repository at
at http://www.ietf.org/ipr. http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at ietf- this standard. Please address the information to the IETF at
ipr@ietf.org. ietf-ipr@ietf.org.
Disclaimer of Validity Disclaimer of Validity
This document and the information contained herein are provided on This document and the information contained herein are provided on an
an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
PARTICULAR PURPOSE.
Copyright Statement Copyright Statement
Copyright (C) The Internet Society (2004). This document is Copyright (C) The Internet Society (2005). This document is subject
subject to the rights, licenses and restrictions contained in BCP to the rights, licenses and restrictions contained in BCP 78, and
78, and except as set forth therein, the authors retain all their except as set forth therein, the authors retain all their rights.
rights.
Acknowledgment Acknowledgment
Funding for the RFC Editor function is currently provided by the Funding for the RFC Editor function is currently provided by the
Internet Society. Internet Society.
 End of changes. 

This html diff was produced by rfcdiff 1.23, available from http://www.levkowetz.com/ietf/tools/rfcdiff/