draft-ietf-netmod-routing-cfg-09.txt		draft-ietf-netmod-routing-cfg-10.txt
	NETMOD L. Lhotka		NETMOD L. Lhotka
	Internet-Draft CZ.NIC		Internet-Draft CZ.NIC
	Intended status: Standards Track February 23, 2013		Intended status: Standards Track July 13, 2013
	Expires: August 27, 2013		Expires: January 14, 2014
	A YANG Data Model for Routing Management		A YANG Data Model for Routing Management
	draft-ietf-netmod-routing-cfg-09		draft-ietf-netmod-routing-cfg-10
	Abstract		Abstract
	This document contains a specification of three YANG modules.		This document contains a specification of three YANG modules.
	Together they form the core routing data model which serves as a		Together they form the core routing data model which serves as a
	framework for configuring and managing a routing subsystem. It is		framework for configuring and managing a routing subsystem. It is
	expected that these modules will be augmented by additional YANG		expected that these modules will be augmented by additional YANG
	modules defining data models for individual routing protocols and		modules defining data models for individual routing protocols and
	other related functions. The core routing data model provides common		other related functions. The core routing data model provides common
	building blocks for such extensions - router instances, routes,		building blocks for such extensions - router instances, routes,
	skipping to change at page 1, line 37		skipping to change at page 1, line 37
	Internet-Drafts are working documents of the Internet Engineering		Internet-Drafts are working documents of the Internet Engineering
	Task Force (IETF). Note that other groups may also distribute		Task Force (IETF). Note that other groups may also distribute
	working documents as Internet-Drafts. The list of current Internet-		working documents as Internet-Drafts. The list of current Internet-
	Drafts is at http://datatracker.ietf.org/drafts/current/.		Drafts is at http://datatracker.ietf.org/drafts/current/.
	Internet-Drafts are draft documents valid for a maximum of six months		Internet-Drafts are draft documents valid for a maximum of six months
	and may be updated, replaced, or obsoleted by other documents at any		and may be updated, replaced, or obsoleted by other documents at any
	time. It is inappropriate to use Internet-Drafts as reference		time. It is inappropriate to use Internet-Drafts as reference
	material or to cite them other than as "work in progress."		material or to cite them other than as "work in progress."
	This Internet-Draft will expire on August 27, 2013.		This Internet-Draft will expire on January 14, 2014.
	Copyright Notice		Copyright Notice
	Copyright (c) 2013 IETF Trust and the persons identified as the		Copyright (c) 2013 IETF Trust and the persons identified as the
	document authors. All rights reserved.		document authors. All rights reserved.
	This document is subject to BCP 78 and the IETF Trust's Legal		This document is subject to BCP 78 and the IETF Trust's Legal
	Provisions Relating to IETF Documents		Provisions Relating to IETF Documents
	(http://trustee.ietf.org/license-info) in effect on the date of		(http://trustee.ietf.org/license-info) in effect on the date of
	publication of this document. Please review these documents		publication of this document. Please review these documents
	skipping to change at page 2, line 18		skipping to change at page 2, line 18
	Table of Contents		Table of Contents
	1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 4		1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 4
	2. Terminology and Notation . . . . . . . . . . . . . . . . . . . 5		2. Terminology and Notation . . . . . . . . . . . . . . . . . . . 5
	2.1. Glossary of New Terms . . . . . . . . . . . . . . . . . . 5		2.1. Glossary of New Terms . . . . . . . . . . . . . . . . . . 5
	2.2. Tree Diagrams . . . . . . . . . . . . . . . . . . . . . . 6		2.2. Tree Diagrams . . . . . . . . . . . . . . . . . . . . . . 6
	2.3. Prefixes in Data Node Names . . . . . . . . . . . . . . . 6		2.3. Prefixes in Data Node Names . . . . . . . . . . . . . . . 6
	3. Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . 8		3. Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . 8
	4. The Design of the Core Routing Data Model . . . . . . . . . . 9		4. The Design of the Core Routing Data Model . . . . . . . . . . 9
	4.1. Router . . . . . . . . . . . . . . . . . . . . . . . . . . 12		4.1. Router . . . . . . . . . . . . . . . . . . . . . . . . . . 12
	4.1.1. Configuration of IPv6 Router Interfaces . . . . . . . 12		4.1.1. Parameters of IPv6 Router Interfaces . . . . . . . . . 13
	4.2. Routes . . . . . . . . . . . . . . . . . . . . . . . . . . 14		4.2. Routes . . . . . . . . . . . . . . . . . . . . . . . . . . 15
	4.3. Routing Tables . . . . . . . . . . . . . . . . . . . . . . 14		4.3. Routing Tables . . . . . . . . . . . . . . . . . . . . . . 15
	4.4. Routing Protocols . . . . . . . . . . . . . . . . . . . . 16		4.3.1. User-Defined Routing Tables . . . . . . . . . . . . . 16
	4.4.1. Routing Pseudo-Protocols . . . . . . . . . . . . . . . 16		4.4. Routing Protocols . . . . . . . . . . . . . . . . . . . . 17
	4.4.2. Defining New Routing Protocols . . . . . . . . . . . . 17		4.4.1. Routing Pseudo-Protocols . . . . . . . . . . . . . . . 17
	4.5. Route Filters . . . . . . . . . . . . . . . . . . . . . . 18		4.4.2. Defining New Routing Protocols . . . . . . . . . . . . 18
	4.6. RPC Operations . . . . . . . . . . . . . . . . . . . . . . 19		4.5. Route Filters . . . . . . . . . . . . . . . . . . . . . . 19
	5. Interactions with Other YANG Modules . . . . . . . . . . . . . 20		4.6. RPC Operations . . . . . . . . . . . . . . . . . . . . . . 20
	5.1. Module "ietf-interfaces" . . . . . . . . . . . . . . . . . 20		5. Interactions with Other YANG Modules . . . . . . . . . . . . . 21
	5.2. Module "ietf-ip" . . . . . . . . . . . . . . . . . . . . . 20		5.1. Module "ietf-interfaces" . . . . . . . . . . . . . . . . . 21
	6. Routing YANG Module . . . . . . . . . . . . . . . . . . . . . 22		5.2. Module "ietf-ip" . . . . . . . . . . . . . . . . . . . . . 21
	7. IPv4 Unicast Routing YANG Module . . . . . . . . . . . . . . . 36		6. Routing YANG Module . . . . . . . . . . . . . . . . . . . . . 23
	8. IPv6 Unicast Routing YANG Module . . . . . . . . . . . . . . . 40		7. IPv4 Unicast Routing YANG Module . . . . . . . . . . . . . . . 42
	9. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 50		8. IPv6 Unicast Routing YANG Module . . . . . . . . . . . . . . . 46
	10. Security Considerations . . . . . . . . . . . . . . . . . . . 52		9. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 59
	11. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 53		10. Security Considerations . . . . . . . . . . . . . . . . . . . 61
	12. References . . . . . . . . . . . . . . . . . . . . . . . . . . 54		11. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 62
	12.1. Normative References . . . . . . . . . . . . . . . . . . . 54		12. References . . . . . . . . . . . . . . . . . . . . . . . . . . 63
	12.2. Informative References . . . . . . . . . . . . . . . . . . 54		12.1. Normative References . . . . . . . . . . . . . . . . . . . 63
	Appendix A. The Complete Data Tree . . . . . . . . . . . . . . . 55		12.2. Informative References . . . . . . . . . . . . . . . . . . 63
	Appendix B. Example: Adding a New Routing Protocol . . . . . . . 57		Appendix A. The Complete Data Trees . . . . . . . . . . . . . . . 64
	Appendix C. Example: NETCONF <get> Reply . . . . . . . . . . . . 60		A.1. Configuration Data . . . . . . . . . . . . . . . . . . . . 64
	Appendix D. Change Log . . . . . . . . . . . . . . . . . . . . . 65		A.2. Operational State Data . . . . . . . . . . . . . . . . . . 65
	D.1. Changes Between Versions -08 and -09 . . . . . . . . . . . 65		Appendix B. Example: Adding a New Routing Protocol . . . . . . . 68
	D.2. Changes Between Versions -07 and -08 . . . . . . . . . . . 65		Appendix C. Example: NETCONF <get> Reply . . . . . . . . . . . . 71
	D.3. Changes Between Versions -06 and -07 . . . . . . . . . . . 65		Appendix D. Change Log . . . . . . . . . . . . . . . . . . . . . 77
	D.4. Changes Between Versions -05 and -06 . . . . . . . . . . . 65		D.1. Changes Between Versions -09 and -10 . . . . . . . . . . . 77
	D.5. Changes Between Versions -04 and -05 . . . . . . . . . . . 66		D.2. Changes Between Versions -08 and -09 . . . . . . . . . . . 77
	D.6. Changes Between Versions -03 and -04 . . . . . . . . . . . 67		D.3. Changes Between Versions -07 and -08 . . . . . . . . . . . 77
	D.7. Changes Between Versions -02 and -03 . . . . . . . . . . . 67		D.4. Changes Between Versions -06 and -07 . . . . . . . . . . . 77
	D.8. Changes Between Versions -01 and -02 . . . . . . . . . . . 68		D.5. Changes Between Versions -05 and -06 . . . . . . . . . . . 78
	D.9. Changes Between Versions -00 and -01 . . . . . . . . . . . 68		D.6. Changes Between Versions -04 and -05 . . . . . . . . . . . 78
			D.7. Changes Between Versions -03 and -04 . . . . . . . . . . . 79
	Author's Address . . . . . . . . . . . . . . . . . . . . . . . . . 69		D.8. Changes Between Versions -02 and -03 . . . . . . . . . . . 79
			D.9. Changes Between Versions -01 and -02 . . . . . . . . . . . 80
			D.10. Changes Between Versions -00 and -01 . . . . . . . . . . . 80
			Author's Address . . . . . . . . . . . . . . . . . . . . . . . . . 82
	1. Introduction		1. Introduction
	This document contains a specification of the following YANG modules:		This document contains a specification of the following YANG modules:
	o Module "ietf-routing" provides generic components of a routing		o Module "ietf-routing" provides generic components of a routing
	data model.		data model.
	o Module "ietf-ipv4-unicast-routing" augments the "ietf-routing"		o Module "ietf-ipv4-unicast-routing" augments the "ietf-routing"
	module with additional data specific to IPv4 unicast.		module with additional data specific to IPv4 unicast.
	skipping to change at page 5, line 31		skipping to change at page 5, line 31
	The following terms are defined in [RFC6020]:		The following terms are defined in [RFC6020]:
	o augment		o augment
	o configuration data		o configuration data
	o data model		o data model
	o data node		o data node
			o feature
	o mandatory node		o mandatory node
	o module		o module
	o state data		o state data
	o RPC operation		o RPC operation
	2.1. Glossary of New Terms		2.1. Glossary of New Terms
	skipping to change at page 6, line 7		skipping to change at page 6, line 7
	prefix, then it is up to the routing algorithm to select the		prefix, then it is up to the routing algorithm to select the
	active route (or several active routes in the case of multi-path		active route (or several active routes in the case of multi-path
	routing).		routing).
	core routing data model: YANG data model resulting from the		core routing data model: YANG data model resulting from the
	combination of "ietf-routing", "ietf-ipv4-unicast-routing" and		combination of "ietf-routing", "ietf-ipv4-unicast-routing" and
	"ietf-ipv6-unicast-routing" modules.		"ietf-ipv6-unicast-routing" modules.
	direct route: a route to a directly connected network.		direct route: a route to a directly connected network.
			system-controlled entry: An entry of a list in operational state
			data ("config false") that is created by the system independently
			of what has been explicitly configured. An example is the default
			routing table. A client cannot cause this entry to be deleted but
			may be able to configure it.
			user-controlled entry: An entry of a list in operational state data
			("config false") that is created and deleted as a direct
			consequence of certain configuration changes. An example is an
			additional user-defined routing table.
	2.2. Tree Diagrams		2.2. Tree Diagrams
	A simplified graphical representation of the complete data tree is		A simplified graphical representation of the complete data tree is
	presented in Appendix A, and similar diagrams of its various subtrees		presented in Appendix A, and similar diagrams of its various subtrees
	appear in the main text. The meaning of the symbols in these		appear in the main text. The meaning of the symbols in these
	diagrams is as follows:		diagrams is as follows:
	o Brackets "[" and "]" enclose list keys.		o Brackets "[" and "]" enclose list keys.
	o Abbreviations before data node names: "rw" means configuration		o Abbreviations before data node names: "rw" means configuration
	(read-write) and "ro" state data (read-only).		(read-write) and "ro" state data (read-only).
	o Symbols after data node names: "?" means an optional node and "*"		o Symbols after data node names: "?" means an optional node and "*"
	denotes a "leaf-list".		denotes a "list" or "leaf-list".
	o Parentheses enclose choice and case nodes, and case nodes are also		o Parentheses enclose choice and case nodes, and case nodes are also
	marked with a colon (":").		marked with a colon (":").
	o Ellipsis ("...") stands for contents of subtrees that are not		o Ellipsis ("...") stands for contents of subtrees that are not
	shown.		shown.
	2.3. Prefixes in Data Node Names		2.3. Prefixes in Data Node Names
	In this document, names of data nodes, RPC methods and other data		In this document, names of data nodes, RPC methods and other data
	model objects are used mostly without a prefix, as long as it is		model objects are used mostly without a prefix, as long as it is
	clear from the context in which YANG module each name is defined.		clear from the context in which YANG module each name is defined.
	Otherwise, names are prefixed using the standard prefix associated		Otherwise, names are prefixed using the standard prefix associated
	with the corresponding YANG module, as shown in Table 1.		with the corresponding YANG module, as shown in Table 1.
	+--------+---------------------------+--------------+		+--------+---------------------------+--------------+
	| Prefix | YANG module | Reference |		| Prefix | YANG module | Reference |
	+--------+---------------------------+--------------+		+--------+---------------------------+--------------+
	| ianaaf | iana-afn-safi | [IANA-IF-AF] |		| ianaaf | iana-afn-safi | [IANA-AF] |
	| | | |		| | | |
	| if | ietf-interfaces | [YANG-IF] |		| if | ietf-interfaces | [YANG-IF] |
	| | | |		| | | |
	| ip | ietf-ip | [YANG-IP] |		| ip | ietf-ip | [YANG-IP] |
	| | | |		| | | |
	| rt | ietf-routing | Section 6 |		| rt | ietf-routing | Section 6 |
	| | | |		| | | |
	| v4ur | ietf-ipv4-unicast-routing | Section 7 |		| v4ur | ietf-ipv4-unicast-routing | Section 7 |
	| | | |		| | | |
	| v6ur | ietf-ipv6-unicast-routing | Section 8 |		| v6ur | ietf-ipv6-unicast-routing | Section 8 |
	skipping to change at page 9, line 12		skipping to change at page 9, line 12
	flexible enough to facilitate such a mapping and accommodate data		flexible enough to facilitate such a mapping and accommodate data
	models with different logic.		models with different logic.
	4. The Design of the Core Routing Data Model		4. The Design of the Core Routing Data Model
	The core routing data model consists of three YANG modules. The		The core routing data model consists of three YANG modules. The
	first module, "ietf-routing", defines the generic components of a		first module, "ietf-routing", defines the generic components of a
	routing system. The other two modules, "ietf-ipv4-unicast-routing"		routing system. The other two modules, "ietf-ipv4-unicast-routing"
	and "ietf-ipv6-unicast-routing", augment the "ietf-routing" module		and "ietf-ipv6-unicast-routing", augment the "ietf-routing" module
	with additional data nodes that are needed for IPv4 and IPv6 unicast		with additional data nodes that are needed for IPv4 and IPv6 unicast
	routing, respectively. An abridged view of the data hierarchy is		routing, respectively. Figures 1 and 2 show abridged views of the
	shown in Figure 1. See Appendix A for the complete data tree.		configuration and operational state data hierarchies. See Appendix A
			for the complete data trees.
	+--rw routing		+--rw routing
	+--rw router [name]		+--rw router* [name]
	| +--rw name		| +--rw name
	| +--rw type?		| +--rw type?
	| +--rw enabled?		| +--rw enabled?
	| +--rw router-id?		| +--rw router-id?
	| +--rw description?		| +--rw description?
	| +--rw main-routing-tables		| +--rw default-routing-tables
	| | +--rw main-routing-table [address-family safi]		| | +--rw default-routing-table* [address-family safi]
	| | +--rw address-family		| | +--rw address-family
	| | +--rw safi		| | +--rw safi
	| | +--rw name?		| | +--rw name
	| +--rw interfaces		| +--rw interfaces
	| | +--rw interface [name]		| | +--rw interface* [name]
	| | +--rw name		| | +--rw name
	| | +--rw v6ur:ipv6-router-advertisements		| | +--rw v6ur:ipv6-router-advertisements
	| | ...		| | ...
	| +--rw routing-protocols		| +--rw routing-protocols
	| +--rw routing-protocol [name]		| +--rw routing-protocol* [name]
	| +--rw name		| +--rw name
	| +--rw description?		| +--rw description?
	| +--rw enabled?		| +--rw enabled?
	| +--rw type		| +--rw type
	| +--rw connected-routing-tables		| +--rw connected-routing-tables
	| | ...		| | ...
	| +--rw static-routes		| +--rw static-routes
	| ...		| ...
	+--rw routing-tables		+--rw routing-tables
	| +--rw routing-table [name]		| +--rw routing-table* [name]
	| +--rw name		| +--rw name
	| +--rw address-family		| +--rw address-family
	| +--rw safi		| +--rw safi
	| +--rw description?		| +--rw description?
	| +--ro routes
	| | +--ro route
	| | ...
	| +--rw recipient-routing-tables		| +--rw recipient-routing-tables
	| +--rw recipient-routing-table [name]		| +--rw recipient-routing-table* [name]
	| ...		| ...
	+--rw route-filters		+--rw route-filters
	+--rw route-filter [name]		+--rw route-filter* [name]
	+--rw name		+--rw name
	+--rw description?		+--rw description?
	+--rw type		+--rw type
	Figure 1: Data hierarchy of the core routing data model.		Figure 1: Configuration data hierarchy.
	As can be seen from Figure 1, the core routing data model introduces		+--ro routing-state
	several generic components of a routing framework: routers, routing		+--ro router* [name]
	tables containing lists of routes, routing protocols and route		| +--ro name
	filters. The following subsections describe these components in more		| +--ro type?
	detail.		| +--ro router-id?
			| +--ro default-routing-tables
			| | +--ro default-routing-table* [address-family safi]
			| | +--ro address-family
			| | +--ro safi
			| | +--ro name
			| +--ro interfaces
			| | +--ro interface* [name]
			| | +--ro name
			| | +--ro v6ur:ipv6-router-advertisements
			| | ...
			| +--ro routing-protocols
			| +--ro routing-protocol* [name]
			| +--ro name
			| +--ro type
			| +--ro connected-routing-tables
			| ...
			+--ro routing-tables
			| +--ro routing-table* [name]
			| +--ro name
			| +--ro address-family
			| +--ro safi
			| +--ro routes
			| | +--ro route*
			| | ...
			| +--ro recipient-routing-tables
			| +--ro recipient-routing-table* [name]
			| ...
			+--ro route-filters
			+--ro route-filter* [name]
			+--ro name
			+--ro type
			Figure 2: Operational state data hierarchy.
			As can be seen from Figures 1 and 2, the core routing data model
			introduces several generic components of a routing framework:
			routers, routing tables containing lists of routes, routing protocols
			and route filters. The following subsections describe these
			components in more detail.
	By combining the components in various ways, and possibly augmenting		By combining the components in various ways, and possibly augmenting
	them with appropriate contents defined in other modules, various		them with appropriate contents defined in other modules, various
	routing setups can be realized.		routing systems can be realized.
	+--------+		+--------+
	| direct | +---+ +--------------+ +---+ +--------------+		| direct | +---+ +--------------+ +---+ +--------------+
	| routes |--->| F |--->| |<---| F |<---| |		| routes |--->| F |--->| |<---| F |<---| |
	+--------+ +---+ | main | +---+ | additional |		+--------+ +---+ | default | +---+ | additional |
	| routing | | routing |		| routing | | routing |
	+--------+ +---+ | table | +---+ | table |		+--------+ +---+ | table | +---+ | table |
	| static |--->| F |--->| |--->| F |--->| |		| static |--->| F |--->| |--->| F |--->| |
	| routes | +---+ +--------------+ +---+ +--------------+		| routes | +---+ +--------------+ +---+ +--------------+
	+--------+ ^ | ^ |		+--------+ ^ | ^ |
	| v | v		| v | v
	+---+ +---+ +---+ +---+		+---+ +---+ +---+ +---+
	| F | | F | | F | | F |		| F | | F | | F | | F |
	+---+ +---+ +---+ +---+		+---+ +---+ +---+ +---+
	^ | ^ |		^ | ^ |
	| v | v		| v | v
	+----------+ +----------+		+----------+ +----------+
	| routing | | routing |		| routing | | routing |
	| protocol | | protocol |		| protocol | | protocol |
	+----------+ +----------+		+----------+ +----------+
	Figure 2: Example setup of a routing system		Figure 3: Example setup of a routing system
	The example in Figure 2 shows a typical (though certainly not the		The example in Figure 3 shows a typical (though certainly not the
	only possible) organization of a more complex routing subsystem for a		only possible) organization of a more complex routing subsystem for a
	single address family. Several of its features are worth mentioning:		single address family. Several of its features are worth mentioning:
	o Along with the main routing table, which must always be present,		o Along with the default routing table, which is always present, an
	an additional routing table is configured.		additional routing table is configured.
	o Each routing protocol instance, including the "static" and		o Each routing protocol instance, including the "static" and
	"direct" pseudo-protocols, is connected to one routing table with		"direct" pseudo-protocols, is connected to one routing table with
	which it can exchange routes (in both directions, except for the		which it can exchange routes (in both directions, except for the
	"static" and "direct" pseudo-protocols).		"static" and "direct" pseudo-protocols).
	o Routing tables may also be connected to each other and exchange		o Routing tables may also be connected to each other and exchange
	routes in either direction (or both).		routes in either direction (or both).
	o Route exchanges along all connections may be controlled by means		o Route exchanges along all connections may be controlled by means
	of route filters, denoted by "F" in Figure 2.		of route filters, denoted by "F" in Figure 3.
	4.1. Router		4.1. Router
	Each router instance in the core routing data model represents a		Each router instance in the core routing data model represents a
	logical router. The exact semantics of this term is left to		logical router. The exact semantics of this term is left to
	implementations. For example, router instances may be completely		implementations. For example, router instances may be completely
	isolated virtual routers or, alternatively, they may internally share		isolated virtual routers or, alternatively, they may internally share
	certain information.		certain information.
			A router instance together with its operational status is represented
			as an entry of the list "/routing-state/router", and identified by a
			unique name. Configuration of that router instance appears as entry
			of the list "/routing/router" whose key is the router instance name.
	An implementation MAY support multiple types of logical routers		An implementation MAY support multiple types of logical routers
	simultaneously. Instances of all router types are organized as		simultaneously. Instances of all router types are organized as
	entries of the same flat "router" list. In order to discriminate		entries of the same flat "router" list. In order to discriminate
	router instances belonging to different types, the "type" leaf is		router instances belonging to different types, the "type" leaf is
	defined as a child of the "router" node.		defined as a child of the "router" node.
	An implementation MAY pose restrictions on allowed router types and		An implementation MAY create one or more system-controlled router
			entries, and MAY also pose restrictions on allowed router types and
	on the number of supported instances for each type. For example, a		on the number of supported instances for each type. For example, a
	simple router implementation may support only one router instance of		simple router implementation may support only one system-controlled
	the default type "standard-router".		router instance of the default type "standard-router" and may not
			allow creation of any user-controlled instances.
	Each network layer interface has to be assigned to one or more router		Each network layer interface has to be assigned to one or more router
	instances in order to be able to participate in packet forwarding,		instances in order to be able to participate in packet forwarding,
	routing protocols and other operations of those router instances.		routing protocols and other operations of those router instances.
	The assignment is accomplished by creating a corresponding entry in		The assignment is accomplished by creating a corresponding entry in
	the list of router interfaces ("rt:interface"). The key of the list		the list of router interfaces ("rt:interface"). The key of the list
	entry is the name of a configured network layer interface, i.e., the		entry is the name of a configured network layer interface, see the
	value of a node /if:interfaces/if:interface/if:name defined in the
	"ietf-interfaces" module [YANG-IF].		"ietf-interfaces" module [YANG-IF].
	In YANG terms, the list of router interfaces is modeled as the "list"		In YANG terms, the list of router interfaces is modeled as the "list"
	node rather than "leaf-list" in order to allow for adding, via		node rather than "leaf-list" in order to allow for adding, via
	augmentation, other configuration or state data related to the		augmentation, other configuration or state data related to the
	corresponding router interface.		corresponding router interface.
	Implementations MAY specify additional rules for the assignment of		Implementations MAY specify additional rules for the assignment of
	interfaces to logical routers. For example, it may be required that		interfaces to logical routers. For example, it may be required that
	the sets of interfaces assigned to different logical routers be		the sets of interfaces assigned to different logical routers be
	disjoint.		disjoint.
	4.1.1. Configuration of IPv6 Router Interfaces		4.1.1. Parameters of IPv6 Router Interfaces
	The module "ietf-ipv6-unicast-routing" augments the definition of the		The module "ietf-ipv6-unicast-routing" augments the definition of the
	data node "rt:interface" with definitions of the following		data node "rt:interface", in both configuration and operational state
	configuration variables as required by [RFC4861], sec. 6.2.1:		data, with definitions of the following variables as required by
			[RFC4861], sec. 6.2.1:
	o send-advertisements,		o send-advertisements,
	o max-rtr-adv-interval,		o max-rtr-adv-interval,
	o min-rtr-adv-interval,		o min-rtr-adv-interval,
	o managed-flag,		o managed-flag,
	o other-config-flag,		o other-config-flag,
	skipping to change at page 14, line 29		skipping to change at page 15, line 29
	o "outgoing-interface": network interface that should be used for		o "outgoing-interface": network interface that should be used for
	sending packets with destination addresses belonging to "dest-		sending packets with destination addresses belonging to "dest-
	prefix".		prefix".
	The above list of route attributes suffices for a simple static		The above list of route attributes suffices for a simple static
	routing configuration. It is expected that future modules defining		routing configuration. It is expected that future modules defining
	routing protocols will add other route attributes such as metrics or		routing protocols will add other route attributes such as metrics or
	preferences.		preferences.
	Routes and their attributes are used both in configuration data, for		Routes and their attributes are used both in configuration data, for
	example as manually configured static routes, and in state data, for		example as manually configured static routes, and in operational
	example as entries in routing tables.		state data, for example as entries in routing tables.
	4.3. Routing Tables		4.3. Routing Tables
	Routing tables are lists of routes complemented with administrative		Routing tables are lists of routes complemented with administrative
	data, namely:		data, namely:
	o "source-protocol": name of the routing protocol from which the		o "source-protocol": type of the routing protocol from which the
	route was originally obtained.		route was originally obtained.
	o "last-updated": the date and time when the route was last updated,		o "last-updated": the date and time when the route was last updated,
	or inserted into the routing table.		or inserted into the routing table.
	Each routing table must contain only routes of the same address		Each routing table must contain only routes of the same address
	family. Address family information consists of two parameters -		family. Address family information consists of two parameters -
	"address-family" and "safi" (Subsequent Address Family Identifier,		"address-family" and "safi" (Subsequent Address Family Identifier,
	SAFI). The permitted values for these two parameters are defined by		SAFI). The permitted values for these two parameters are defined by
	IANA and represented using YANG enumeration types "ianaaf:address-		IANA and represented using YANG enumeration datatypes "ianaaf:
	family" and "ianaaf:subsequent-address-family" [IANA-IF-AF].		address-family" and "ianaaf:subsequent-address-family" [IANA-AF].
	In the core routing data model, the "routing-table" node represents		In the core routing data model, routing tables are operational state
	configuration while the descendant list of routes is defined as state		data represented as entries of the list "/routing-state/
	data. The contents of route lists are controlled and manipulated by		routing-tables/routing-table". The contents of routing tables are
	routing protocol operations which may result in route additions,		controlled and manipulated by routing protocol operations which may
	removals and modifications. This also includes manipulations via the		result in route additions, removals and modifications. This also
	"static" and/or "direct" pseudo-protocols, see Section 4.4.1.		includes manipulations via the "static" and/or "direct" pseudo-
			protocols, see Section 4.4.1.
	In order to activate an address family for use within a router		Routing tables are global, which means that a routing table may be
	instance, a client configures an entry of the list /routing/router/		used by any or all router instances. However, an implementation MAY
	main-routing-tables/main-routing-table. This entry contains a		specify rules and restrictions for sharing routing tables among
	reference to a routing table which henceforth serves as the so-called		router instances.
	main routing table for the router instance and address family.
	Section 4.4 explains the role of main routing tables.
	Routing tables are global, which means that a configured routing		Each router instance must have, for every supported address family,
	table may be used by any or all router instances.		one routing table selected as the so-called default routing table.
			This selection is recorded in the list "default-routing-table". The
			role of default routing tables is explained in Section 4.4.
	Server implementations MAY pose restrictions regarding the number of		Simple router implementations will typically create one system-
	supported routing tables, and rules for configuration and use of		controlled routing table per supported address family, and declare it
	routing tables. For example:		as a default routing table (via a system-controlled entry of the
			"default-routing-table" list).
	o A server may support no more than one routing table per address		4.3.1. User-Defined Routing Tables
	family.
	o Router instances (of a certain type) may not be allowed to share		More complex router implementations allow for multiple routing tables
	routing tables, i.e., each routing table is used by no more than		per address family that are used for policy routing and other
	one router instance.		purposes. If it is the case, the NETCONF server SHALL advertise the
			feature "user-defined-routing-tables". This feature activates
			additional nodes in both configuration and operational state data,
			and enables the client to:
	For servers supporting multiple routing tables per address family,		o Configure new user-controlled routing tables by creating entries
	additional tables can be configured by creating new entries in the		in the "/routing/routing-tables/routing-table" list.
	"routing-table" list, either as a part of factory-default
	configuration, or by a client's action.
	The way how a routing system uses information from routing tables for		o Configure any (system-controlled or user-controlled) routing table
	actual packet forwarding is outside the scope of this document.		as the default routing table for an address family.
			o Connect a routing protocol instance to a non-default routing table
			(see Section 4.4).
			o Configure a routing table as a recipient routing table of another
			routing table (see below).
	Every routing table can serve as a source of routes for other routing		Every routing table can serve as a source of routes for other routing
	tables. To achieve this, one or more recipient routing tables may be		tables of the same address family. To achieve this, one or more
	specified in the configuration of the source routing table.		recipient routing tables may be specified in the configuration of the
	Optionally, a route filter may be configured for any or all recipient		source routing table. Optionally, a route filter may be configured
	routing tables. Such a route filter then selects and/or manipulates		for any or all recipient routing tables. Such a route filter then
	the routes that are passed between the source and recipient routing		selects and/or manipulates the routes that are passed between the
	table.		source and recipient routing table.
	A routing table MUST NOT appear among its own recipient routing		A routing table MUST NOT appear among its own recipient routing
	tables. A recipient routing table also MUST be of the same address		tables.
	family as its source routing table.
	4.4. Routing Protocols		4.4. Routing Protocols
	The core routing data model provides an open-ended framework for		The core routing data model provides an open-ended framework for
	defining multiple routing protocol instances within each router		defining multiple routing protocol instances within a router
	instance. Each routing protocol instance MUST be assigned a type,		instance. Each routing protocol instance MUST be assigned a type,
	which is an identity derived from the "rt:routing-protocol" base		which is an identity derived from the "rt:routing-protocol" base
	identity. The core routing data model defines two identities for the		identity. The core routing data model defines two identities for the
	direct and static pseudo-protocols (Section 4.4.1).		direct and static pseudo-protocols (Section 4.4.1).
	Each routing protocol instance is connected to exactly one routing		Each routing protocol instance is connected to exactly one routing
	table for each address family that the routing protocol instance		table for each address family that the routing protocol instance
	supports. Routes learned from the network by a routing protocol are		supports. Routes learned from the network by a routing protocol are
	normally installed into the connected routing table(s) and,		normally installed into the connected routing table(s) and,
	conversely, routes from the connected routing table(s) are normally		conversely, routes from the connected routing table(s) are normally
	injected into the routing protocol. However, routing protocol		injected into the routing protocol. However, routing protocol
	implementations MAY specify rules that restrict this exchange of		implementations MAY specify rules that restrict this exchange of
	routes in either direction (or both directions).		routes in either direction (or both directions).
	A routing table is connected to a routing protocol instance by		On devices supporting the "user-defined-routing-tables" feature, a
	creating a corresponding entry in the "connected-routing-table" list.		routing table (system-controlled or user-controlled) is connected to
	If such an entry is not configured for an address family, then the		a routing protocol instance by configuring a corresponding entry in
	main routing table MUST be used as the connected routing table for		the "connected-routing-table" list. If such an entry is not
	this address family.		configured for an address family, then the default routing table MUST
			be used as the connected routing table for this address family.
	In addition, two independent route filters (see Section 4.5) may be		In addition, two independent route filters (see Section 4.5) may be
	configured for each connected routing table to apply client-defined		configured for each connected routing table to apply client-defined
	policies controlling the exchange of routes in both directions		policies controlling the exchange of routes in both directions
	between the routing protocol instance and the connected routing		between the routing protocol instance and the connected routing
	table:		table:
	o import filter controls which routes are passed from the routing		o import filter controls which routes are passed from the routing
	protocol instance to the connected routing table,		protocol instance to the connected routing table,
	skipping to change at page 17, line 11		skipping to change at page 18, line 15
	from both "direct" and "static" protocol instances are passed to the		from both "direct" and "static" protocol instances are passed to the
	connected routing table (subject to route filters, if any), but an		connected routing table (subject to route filters, if any), but an
	exchange in the opposite direction is not allowed.		exchange in the opposite direction is not allowed.
	Every router instance MUST implement exactly one instance of the		Every router instance MUST implement exactly one instance of the
	"direct" pseudo-protocol type. The name of this instance MUST also		"direct" pseudo-protocol type. The name of this instance MUST also
	be "direct". It is the source of direct routes for all configured		be "direct". It is the source of direct routes for all configured
	address families. Direct routes are normally supplied by the		address families. Direct routes are normally supplied by the
	operating system kernel, based on the configuration of network		operating system kernel, based on the configuration of network
	interface addresses, see Section 5.2. The "direct" pseudo-protocol		interface addresses, see Section 5.2. The "direct" pseudo-protocol
	MUST always be connected to the main routing tables of all supported		MUST always be connected to the default routing tables of all
	address families. Unlike other routing protocol types, this		supported address families. Unlike other routing protocol types,
	connection cannot be changed in the configuration. Direct routes MAY		this connection cannot be changed in the configuration. Direct
	be filtered before they appear in the main routing table.		routes MAY be filtered before they appear in the default routing
			table.
	A pseudo-protocol of the type "static" allows for specifying routes		A pseudo-protocol of the type "static" allows for specifying routes
	manually. It MAY be configured in zero or multiple instances,		manually. It MAY be configured in zero or multiple instances,
	although a typical configuration will have exactly one instance per		although a typical configuration will have exactly one instance per
	logical router.		logical router.
	Static routes are configured within the "static-routes" container,		Static routes are configured within the "static-routes" container,
	see Figure 3.		see Figure 4.
	+--rw static-routes		+--rw static-routes
	+--rw v4ur:ipv4		+--rw v4ur:ipv4
	| +--rw v4ur:route [id]		| +--rw v4ur:route* [id]
	| +--rw v4ur:id		| +--rw v4ur:id
	| +--rw v4ur:description?		| +--rw v4ur:description?
	| +--rw v4ur:outgoing-interface?		| +--rw v4ur:outgoing-interface?
	| +--rw v4ur:dest-prefix		| +--rw v4ur:dest-prefix
	| +--rw v4ur:next-hop?		| +--rw v4ur:next-hop?
	+--rw v6ur:ipv6		+--rw v6ur:ipv6
	+--rw v6ur:route [id]		+--rw v6ur:route* [id]
	+--rw v6ur:id		+--rw v6ur:id
	+--rw v6ur:description?		+--rw v6ur:description?
	+--rw v6ur:outgoing-interface?		+--rw v6ur:outgoing-interface?
	+--rw v6ur:dest-prefix		+--rw v6ur:dest-prefix
	+--rw v6ur:next-hop?		+--rw v6ur:next-hop?
	Figure 3: Structure of "static-routes" subtree.		Figure 4: Structure of "static-routes" subtree.
	4.4.2. Defining New Routing Protocols		4.4.2. Defining New Routing Protocols
	It is expected that future YANG modules will create data models for		It is expected that future YANG modules will create data models for
	additional routing protocol types. Such a new module has to define		additional routing protocol types. Such a new module has to define
	the protocol-specific configuration and state data, and it has to fit		the protocol-specific configuration and state data, and it has to fit
	it into the core routing framework in the following way:		it into the core routing framework in the following way:
	o A new identity MUST be defined for the routing protocol and its		o A new identity MUST be defined for the routing protocol and its
	base identity MUST be set to "rt:routing-protocol", or to an		base identity MUST be set to "rt:routing-protocol", or to an
	skipping to change at page 18, line 19		skipping to change at page 19, line 24
	/rt:routing-tables/rt:routing-table/rt:route		/rt:routing-tables/rt:routing-table/rt:route
	and		and
	/rt:active-route/rt:output/rt:route,		/rt:active-route/rt:output/rt:route,
	and possibly other places in the configuration, state data and RPC		and possibly other places in the configuration, state data and RPC
	input or output.		input or output.
	o Configuration parameters and state data for the new protocol can		o Configuration parameters and/or state data for the new protocol
	be defined by augmenting the "routing-protocol" data node.		can be defined by augmenting the "routing-protocol" data node
			under both "/routing" and "/routing-state".
	o Per-interface configuration, including activation of the routing		o Per-interface configuration, including activation of the routing
	protocol on individual interfaces, can use references to entries		protocol on individual interfaces, can use references to entries
	in the list of router interfaces (rt:interface).		in the list of router interfaces (rt:interface).
	By using the "when" statement, the augmented configuration parameters		By using the "when" statement, the augmented configuration parameters
	and state data specific to the new protocol SHOULD be made		and state data specific to the new protocol SHOULD be made
	conditional and valid only if the value of "rt:type" is equal to the		conditional and valid only if the value of "rt:type" or "rt:source-
	new protocol's identity. It is also RECOMMENDED that the protocol-		protocol" is equal to the new protocol's identity. It is also
	specific data be encapsulated in appropriately named containers.		RECOMMENDED that the protocol-specific data be encapsulated in
			appropriately named containers.
	The above steps are implemented by the example YANG module for the		The above steps are implemented by the example YANG module for the
	RIP routing protocol in Appendix B.		RIP routing protocol in Appendix B.
	4.5. Route Filters		4.5. Route Filters
	The core routing data model provides a skeleton for defining route		The core routing data model provides a skeleton for defining route
	filters that can be used to restrict the set of routes being		filters that can be used to restrict the set of routes being
	exchanged between a routing protocol instance and a connected routing		exchanged between a routing protocol instance and a connected routing
	table, or between a source and a recipient routing table. Route		table, or between a source and a recipient routing table. Route
	filters may also manipulate routes, i.e., add, delete, or modify		filters may also manipulate routes, i.e., add, delete, or modify
	their attributes.		their attributes.
	Route filters are global, which means that a configured route filter		Route filters are global, which means that a configured route filter
	may be used by any or all router instances.		may be used by any or all router instances. However, an
			implementation MAY specify rules and restrictions for sharing route
			filters among router instances.
	By itself, the route filtering framework defined in this document		By itself, the route filtering framework defined in this document
	allows for applying only two extreme routing policies which are		allows for applying only two extreme routing policies which are
	represented by the following pre-defined route filter types:		represented by the following pre-defined route filter types:
	o "deny-all-route-filter": all routes are blocked,		o "deny-all-route-filter": all routes are blocked,
	o "allow-all-route-filter": all routes are permitted.		o "allow-all-route-filter": all routes are permitted.
	Note that the latter type is equivalent to no route filter.		The latter type is equivalent to no route filter.
	It is expected that more comprehensive route filtering frameworks		It is expected that more comprehensive route filtering frameworks
	will be developed separately.		will be developed separately.
	Each route filter is identified by a name which MUST be unique within		Each route filter is identified by a unique name. Its type MUST be
	the entire configuration. Its type MUST be specified by the "type"		specified by the "type" identity reference - this opens the space for
	identity reference - this opens the space for multiple route		multiple route filtering framework implementations.
	filtering framework implementations.
	4.6. RPC Operations		4.6. RPC Operations
	The "ietf-routing" module defines two RPC operations:		The "ietf-routing" module defines two RPC operations:
	o active-route: query the routing system for the active route(s)		o active-route: query the routing system for the active route(s)
	that are currently used for sending datagrams to a destination		that are currently used for sending datagrams to a destination
	host whose address is passed as an input parameter.		host whose address is passed as an input parameter.
	o route-count: retrieve the total number of entries in a routing		o route-count: retrieve the total number of entries in a routing
	skipping to change at page 22, line 11		skipping to change at page 23, line 11
	direct route. The destination prefix of this route is set according		direct route. The destination prefix of this route is set according
	to the configured IP address and network prefix/mask, and the		to the configured IP address and network prefix/mask, and the
	interface is set as the outgoing interface for that route.		interface is set as the outgoing interface for that route.
	6. Routing YANG Module		6. Routing YANG Module
	RFC Ed.: In this section, replace all occurrences of 'XXXX' with the		RFC Ed.: In this section, replace all occurrences of 'XXXX' with the
	actual RFC number and all occurrences of the revision date below with		actual RFC number and all occurrences of the revision date below with
	the date of RFC publication (and remove this note).		the date of RFC publication (and remove this note).
	<CODE BEGINS> file "ietf-routing@2013-02-23.yang"		<CODE BEGINS> file "ietf-routing@2013-07-13.yang"
	module ietf-routing {		module ietf-routing {
	namespace "urn:ietf:params:xml:ns:yang:ietf-routing";		namespace "urn:ietf:params:xml:ns:yang:ietf-routing";
	prefix "rt";		prefix "rt";
	import ietf-yang-types {		import ietf-yang-types {
	prefix "yang";		prefix "yang";
	}		}
	skipping to change at page 22, line 49		skipping to change at page 23, line 49
	<mailto:david.kessens@nsn.com>		<mailto:david.kessens@nsn.com>
	WG Chair: Juergen Schoenwaelder		WG Chair: Juergen Schoenwaelder
	<mailto:j.schoenwaelder@jacobs-university.de>		<mailto:j.schoenwaelder@jacobs-university.de>
	Editor: Ladislav Lhotka		Editor: Ladislav Lhotka
	<mailto:lhotka@nic.cz>		<mailto:lhotka@nic.cz>
	";		";
	description		description
	"This YANG module defines essential components that may be used		"This YANG module defines essential components for the management
	for configuring a routing subsystem.		of a routing subsystem.
	Copyright (c) 2012 IETF Trust and the persons identified as		Copyright (c) 2013 IETF Trust and the persons identified as
	authors of the code. All rights reserved.		authors of the code. All rights reserved.
	Redistribution and use in source and binary forms, with or		Redistribution and use in source and binary forms, with or
	without modification, is permitted pursuant to, and subject to		without modification, is permitted pursuant to, and subject to
	the license terms contained in, the Simplified BSD License set		the license terms contained in, the Simplified BSD License set
	forth in Section 4.c of the IETF Trust's Legal Provisions		forth in Section 4.c of the IETF Trust's Legal Provisions
	Relating to IETF Documents		Relating to IETF Documents
	(http://trustee.ietf.org/license-info).		(http://trustee.ietf.org/license-info).
	This version of this YANG module is part of RFC XXXX; see the		This version of this YANG module is part of RFC XXXX; see the
	RFC itself for full legal notices.		RFC itself for full legal notices.
	";		";
	revision 2013-02-23 {		revision 2013-07-13 {
	description		description
	"Initial revision.";		"Initial revision.";
	reference		reference
	"RFC XXXX: A YANG Data Model for Routing Management";		"RFC XXXX: A YANG Data Model for Routing Management";
	}		}
			/* Features */
			feature user-defined-routing-tables {
			description
			"Indicates that the device supports additional routing tables
			defined by the user.
			Devices that do not support this feature MUST provide exactly
			one routing table per supported address family. These routing
			tables then appear as entries of the list
			/routing-state/routing-tables/routing-table.
			";
			}
	/* Identities */		/* Identities */
	identity router-type {		identity router-type {
	description		description
	"Base identity from which router type identities are derived.		"Base identity from which router type identities are derived.
	It is primarily intended for discriminating among different		It is primarily intended for discriminating among different
	types of logical routers or router virtualization.		types of logical routers or router virtualization.
	";		";
	}		}
	skipping to change at page 24, line 37		skipping to change at page 25, line 50
	"Route filter that permits all routes.";		"Route filter that permits all routes.";
	}		}
	/* Type Definitions */		/* Type Definitions */
	typedef router-ref {		typedef router-ref {
	type leafref {		type leafref {
	path "/rt:routing/rt:router/rt:name";		path "/rt:routing/rt:router/rt:name";
	}		}
	description		description
	"This type is used for leafs that reference a router		"This type is used for leafs that reference a router instance
	instance.";		configuration.";
			}
			typedef router-state-ref {
			type leafref {
			path "/rt:routing-state/rt:router/rt:name";
			}
			description
			"This type is used for leafs that reference state data of a
			router instance.";
	}		}
	typedef routing-table-ref {		typedef routing-table-ref {
	type leafref {		type leafref {
	path "/rt:routing/rt:routing-tables/rt:routing-table/rt:name";		path "/rt:routing/rt:routing-tables/rt:routing-table/rt:name";
	}		}
	description		description
	"This type is used for leafs that reference a routing table.";		"This type is used for leafs that reference a routing table
			configuration.";
			}
			typedef routing-table-state-ref {
			type leafref {
			path "/rt:routing-state/rt:routing-tables/rt:routing-table/"
			+ "rt:name";
			}
			description
			"This type is used for leafs that reference a routing table in
			state data.";
	}		}
	typedef route-filter-ref {		typedef route-filter-ref {
	type leafref {		type leafref {
	path "/rt:routing/rt:route-filters/rt:route-filter/rt:name";		path "/rt:routing/rt:route-filters/rt:route-filter/rt:name";
	}		}
	description		description
	"This type is used for leafs that reference a route filter.";		"This type is used for leafs that reference a route filter
			configuration.";
	}		}
			typedef route-filter-state-ref {
			type leafref {
			path "/rt:routing-state/rt:route-filters/rt:route-filter/"
			+ "rt:name";
			}
			description
			"This type is used for leafs that reference a route filter in
			state data.";
			}
	/* Groupings */		/* Groupings */
	grouping afn-safi {		grouping afn-safi {
	description		description
	"This grouping provides two parameters specifying address		"This grouping provides two parameters specifying address
	family and subsequent address family.";		family and subsequent address family.";
	leaf address-family {		leaf address-family {
	type ianaaf:address-family;		type ianaaf:address-family;
	mandatory "true";		mandatory "true";
	description		description
	"Address family.";		"Address family.";
	}		}
	leaf safi {		leaf safi {
	type ianaaf:subsequent-address-family;		type ianaaf:subsequent-address-family;
	mandatory "true";		mandatory "true";
	description		description
	"Subsequent address family.";		"Subsequent address family.";
	}		}
	}		}
			grouping router-id {
			description
			"This grouping provides the definition of router ID.";
			leaf router-id {
			type yang:dotted-quad;
			description
			"Router ID - 32-bit number in the form of a dotted quad.";
			}
			}
	grouping route-content {		grouping route-content {
	description		description
	"Generic parameters of routes.";		"Generic parameters of static routes (configuration).";
	leaf outgoing-interface {		leaf outgoing-interface {
	type if:interface-ref;		type if:interface-ref;
	description		description
	"Outgoing interface.";		"Outgoing interface.";
	}		}
	}		}
			grouping route-state-content {
			description
			"Generic parameters of routes in state data.";
			leaf outgoing-interface {
			type if:interface-state-ref;
			description
			"Outgoing interface.";
			}
			}
	/* RPC Methods */		/* RPC Methods */
	rpc active-route {		rpc active-route {
	description		description
	"Return the active route (or multiple routes, in the case of		"Return the active route (or multiple routes, in the case of
	multi-path routing) to a destination address.		multi-path routing) to a destination address.
	Parameters		Parameters
	1. 'router-name',		1. 'router-name',
	skipping to change at page 26, line 13		skipping to change at page 28, line 30
	If the router instance with 'router-name' doesn't exist, then		If the router instance with 'router-name' doesn't exist, then
	this operation SHALL fail with error-tag 'data-missing' and		this operation SHALL fail with error-tag 'data-missing' and
	error-app-tag 'router-not-found'.		error-app-tag 'router-not-found'.
	If no active route for 'destination-address' exists, no output		If no active route for 'destination-address' exists, no output
	is returned - the server SHALL send an <rpc-reply> containing		is returned - the server SHALL send an <rpc-reply> containing
	a single element <ok>.		a single element <ok>.
	";		";
	input {		input {
	leaf router-name {		leaf router-name {
	type router-ref;		type router-state-ref;
	mandatory "true";		mandatory "true";
	description		description
	"Name of the router instance whose forwarding information		"Name of the router instance whose forwarding information
	base is being queried.";		base is being queried.";
	}		}
	container destination-address {		container destination-address {
	description		description
	"Network layer destination address.		"Network layer destination address.
	Address family specific modules MUST augment this		Address family specific modules MUST augment this
	skipping to change at page 27, line 10		skipping to change at page 29, line 27
	1. 'routing-table-name'.		1. 'routing-table-name'.
	If the routing table with the name specified in		If the routing table with the name specified in
	'routing-table-name' doesn't exist, then this operation SHALL		'routing-table-name' doesn't exist, then this operation SHALL
	fail with error-tag 'data-missing' and error-app-tag		fail with error-tag 'data-missing' and error-app-tag
	'routing-table-not-found'.		'routing-table-not-found'.
	";		";
	input {		input {
	leaf routing-table {		leaf routing-table {
	type routing-table-ref;		type routing-table-state-ref;
	mandatory "true";		mandatory "true";
	description		description
	"Name of the routing table.";		"Name of the routing table.";
	}		}
	}		}
	output {		output {
	leaf number-of-routes {		leaf number-of-routes {
	type uint32;		type uint32;
	mandatory "true";		mandatory "true";
	description		description
	"Number of routes in the routing table.";		"Number of routes in the routing table.";
	}		}
	}		}
	}		}
	/* Data Nodes */		/* Operational state data */
	container routing {		container routing-state {
			config "false";
	description		description
	"Routing parameters.";		"Operational state of the routing subsystem.";
	list router {		list router {
	key "name";		key "name";
	description		description
	"Each list entry is a container for configuration and state		"Each list entry is a container for operational state data of
	data of a single (logical) router instance.		a router instance.
			An implementation MAY create one or more instances on its
			own, other instances MAY be created by configuration.
	";		";
	leaf name {		leaf name {
	type string;		type string;
	description		description
	"An arbitrary name of the router instance.";		"The name of the router instance.";
	}		}
	leaf type {		leaf type {
	type identityref {		type identityref {
	base router-type;		base router-type;
	}		}
	default "rt:standard-router";		default "rt:standard-router";
	description		description
	"This leaf specifies the router type.		"The router type, primarily intended for discriminating
	It is primarily intended as a means for discriminating
	among different types of logical routers, route		among different types of logical routers, route
	virtualization, master-slave arrangements etc., while		virtualization, master-slave arrangements etc., while
	keeping all such router instances in the same flat list.		keeping all router instances in the same flat list.
			";
			}
			uses router-id {
			description
			"Global router ID.
			An implementation may choose a value if none is
			configured.
			Routing protocols MAY override this global parameter.
			";
			}
			container default-routing-tables {
			description
			"Default routing tables used by the router instance.";
			list default-routing-table {
			key "address-family safi";
			description
			"Each list entry specifies the default routing table for
			one address family.
			The default routing table is operationally connected to
			all routing protocols for which a connected routing
			table has not been explicitly configured.
			The 'direct' pseudo-protocol is always connected to the
			default routing tables.
			";
			uses afn-safi;
			leaf name {
			type routing-table-state-ref;
			mandatory "true";
			description
			"Name of an existing routing table to be used as the
			default routing table for the given router instance
			and address family.";
			}
			}
			}
			container interfaces {
			description
			"Router interfaces.";
			list interface {
			key "name";
			description
			"List of network layer interfaces assigned to the router
			instance.";
			leaf name {
			type if:interface-state-ref;
			description
			"A reference to the name of a configured network layer
			interface.";
			}
			}
			}
			container routing-protocols {
			description
			"Container for the list of routing protocol instances.";
			list routing-protocol {
			key "name";
			description
			"Operational state of a routing protocol instance.
			";
			leaf name {
			type string;
			description
			"The name of the routing protocol instance.";
			}
			leaf type {
			type identityref {
			base routing-protocol;
			}
			mandatory "true";
			description
			"Type of the routing protocol.";
			}
			container connected-routing-tables {
			if-feature user-defined-routing-tables;
			description
			"Container for connected routing tables.
			";
			list connected-routing-table {
			key "name";
			description
			"List of routing tables to which the routing protocol
			instance is connected (at most one routing table per
			address family).
			";
			leaf name {
			type routing-table-state-ref;
			description
			"Name of an existing routing table.";
			}
			leaf import-filter {
			type route-filter-state-ref;
			description
			"Reference to a route filter that is used for
			filtering routes passed from this routing protocol
			instance to the routing table specified by the
			'name' sibling node.
			If this leaf is not present, the behavior is
			protocol-specific, but typically it means that all
			routes are accepted.
			";
			}
			leaf export-filter {
			type route-filter-state-ref;
			description
			"Reference to a route filter that is used for
			filtering routes passed from the routing table
			specified by the 'name' sibling node to this
			routing protocol instance.
			If this leaf is not present, the behavior is
			protocol-specific - typically it means that all
			routes are accepted.
			The 'direct' and 'static' pseudo-protocols accept
			no routes from any routing table.
			";
			}
			}
			}
			}
			}
			}
			container routing-tables {
			description
			"Container for routing tables.";
			list routing-table {
			key "name";
			description
			"Each entry represents a routing table identified by the
			'name' key. All routes in a routing table MUST belong to
			the same address family.
			The server MUST create the default routing table for each
			address family, and MAY create other routing tables.
			Additional routing tables MAY be created in the
			configuration.
			";
			leaf name {
			type string;
			description
			"The name of the routing table.";
			}
			uses afn-safi;
			container routes {
			description
			"Current contents of the routing table.";
			list route {
			description
			"A routing table entry. This data node MUST be
			augmented with information specific for routes of each
			address family.";
			uses route-state-content;
			leaf source-protocol {
			type identityref {
			base routing-protocol;
			}
			mandatory "true";
			description
			"Type of the routing protocol from which the route
			originated.";
			}
			leaf last-updated {
			type yang:date-and-time;
			description
			"Time stamp of the last modification of the route. If
			the route was never modified, it is the time when
			the route was inserted into the routing table.";
			}
			}
			}
			container recipient-routing-tables {
			if-feature user-defined-routing-tables;
			description
			"Container for recipient routing tables.";
			list recipient-routing-table {
			key "name";
			description
			"List of routing tables that receive routes from this
			routing table.";
			leaf name {
			type routing-table-state-ref;
			description
			"The name of the recipient routing table.";
			}
			leaf filter {
			type route-filter-state-ref;
			description
			"A route filter which is applied to the routes passed
			to the recipient routing table.";
			}
			}
			}
			}
			}
			container route-filters {
			description
			"Container for route filters.";
			list route-filter {
			key "name";
			description
			"Route filters are used for filtering and/or manipulating
			routes that are passed between a routing protocol and a
			routing table and vice versa, or between two routing
			tables.
			It is expected that other modules augment this list with
			contents specific for a particular route filter type.
	";		";
			leaf name {
			type string;
			description
			"The name of the route filter.";
			}
			leaf type {
			type identityref {
			base route-filter;
			}
			mandatory "true";
			description
			"Type of the route-filter - an identity derived from the
			'route-filter' base identity.";
			}
			}
			}
			}
			/* Configuration Data */
			container routing {
			description
			"Configuration parameters for the routing subsystem.";
			list router {
			key "name";
			description
			"Configuration of a router instance.
			";
			leaf name {
			type string;
			description
			"The name of the router instance.
			The names for system-created router instances are assigned
			by the system. The same name then has to be used in the
			configuration.
			An arbitrary name may be chosen if the router instance is
			created in the configuration.
			";
			}
			leaf type {
			type identityref {
			base router-type;
			}
			default "rt:standard-router";
			description
			"The router type.";
	}		}
	leaf enabled {		leaf enabled {
	type boolean;		type boolean;
	default "true";		default "true";
	description		description
	"Enable/disable the router instance.		"Enable/disable the router instance.
	If this parameter is false, the parent router instance is		If this parameter is false, the parent router instance is
	disabled, despite any other configuration that might be		disabled and does not appear in operational state data,
	present.		despite any other configuration that might be present.
	";		";
	}		}
	leaf router-id {		uses router-id {
	type yang:dotted-quad;
	description		description
	"Global router ID - 32-bit number in the form of a dotted		"Configuration of the global router ID.";
	quad.
	An implementation MAY select a value if this parameter is
	not configured.
	Routing protocols MAY override this global parameter
	inside their configuration.
	";
	}		}
	leaf description {		leaf description {
	type string;		type string;
	description		description
	"Textual description of the router.";		"Textual description of the router instance.";
	}		}
	container main-routing-tables {		container default-routing-tables {
			if-feature user-defined-routing-tables;
	description		description
	"Main routing tables used by the router instance.";		"Configuration of the default routing tables used by the
	list main-routing-table {		router instance.
			The default routing table for an addressed family if by
			default connected to all routing protocol instances
			supporting that address family, and always receives direct
			routes.
			";
			list default-routing-table {
	must "address-family=/routing/routing-tables/"		must "address-family=/routing/routing-tables/"
	+ "routing-table[name=current()/name]/"		+ "routing-table[name=current()/name]/"
	+ "address-family and safi=/routing/routing-tables/"		+ "address-family and safi=/routing/routing-tables/"
	+ "routing-table[name=current()/name]/safi" {		+ "routing-table[name=current()/name]/safi" {
	error-message "Address family mismatch.";		error-message "Address family mismatch.";
	description		description
	"The entry's address family MUST match that of the		"The entry's address family MUST match that of the
	referenced routing table.";		referenced routing table.";
	}		}
	key "address-family safi";		key "address-family safi";
	description		description
	"Each list entry specifies the main routing table for one		"Each list entry configures the default routing table for
	address family.		one address family.";
	The main routing table is operationally connected to all
	routing protocols for which a connected routing table
	has not been explicitly configured.
	The 'direct' pseudo-protocol is always connected to the
	main routing table.
	Address families that don't have their entry in this
	list MUST NOT be used in the rest of the router instance
	configuration.
	";
	uses afn-safi;		uses afn-safi;
	leaf name {		leaf name {
	type routing-table-ref;		type string;
			mandatory "true";
	description		description
	"Name of an existing routing table to be used as the		"Name of an existing routing table to be used as the
	main routing table for the given router instance and		default routing table for the given router instance
	address family.";		and address family.";
	}		}
	}		}
	}		}
	container interfaces {		container interfaces {
	description		description
	"Router interface parameters.";		"Configuration of router interface parameters.";
	list interface {		list interface {
	key "name";		key "name";
	description		description
	"List of network layer interfaces assigned to the router		"List of network layer interfaces assigned to the router
	instance.";		instance.";
	leaf name {		leaf name {
	type if:interface-ref;		type if:interface-ref;
	description		description
	"A reference to the name of a configured network layer		"A reference to the name of a configured network layer
	interface.";		interface.";
	}		}
	}		}
	}		}
	container routing-protocols {		container routing-protocols {
	description		description
	"Container for the list of configured routing protocol		"Configuration of routing protocol instances.";
	instances.";
	list routing-protocol {		list routing-protocol {
	key "name";		key "name";
	description		description
	"An instance of a routing protocol.";		"Each entry contains configuration of a routing protocol
			instance.";
	leaf name {		leaf name {
	type string;		type string;
	description		description
	"An arbitrary name of the routing protocol instance.";		"An arbitrary name of the routing protocol instance.";
	}		}
	leaf description {		leaf description {
	type string;		type string;
	description		description
	"Textual description of the routing protocol		"Textual description of the routing protocol
	instance.";		instance.";
	}		}
	leaf enabled {		leaf enabled {
	type boolean;		type boolean;
	default "true";		default "true";
	description		description
	"Enable/disable the routing protocol instance.		"Enable/disable the routing protocol instance.
	If this parameter is false, the parent routing		If this parameter is false, the parent routing
	protocol instance is disabled, despite any other		protocol instance is disabled and does not appear in
			operational state data, despite any other
	configuration that might be present.		configuration that might be present.
	";		";
	}		}
	leaf type {		leaf type {
	type identityref {		type identityref {
	base routing-protocol;		base routing-protocol;
	}		}
	mandatory "true";		mandatory "true";
	description		description
	"Type of the routing protocol - an identity derived		"Type of the routing protocol - an identity derived
	from the 'routing-protocol' base identity.";		from the 'routing-protocol' base identity.";
	}		}
	skipping to change at page 30, line 37		skipping to change at page 38, line 16
	leaf type {		leaf type {
	type identityref {		type identityref {
	base routing-protocol;		base routing-protocol;
	}		}
	mandatory "true";		mandatory "true";
	description		description
	"Type of the routing protocol - an identity derived		"Type of the routing protocol - an identity derived
	from the 'routing-protocol' base identity.";		from the 'routing-protocol' base identity.";
	}		}
	container connected-routing-tables {		container connected-routing-tables {
			if-feature user-defined-routing-tables;
	description		description
	"Container for connected routing tables.		"Configuration of connected routing tables.
	";		";
	list connected-routing-table {		list connected-routing-table {
	must "not(/routing/routing-tables/"		must "not(/routing/routing-tables/"
	+ "routing-table[name=current()/"		+ "routing-table[name=current()/"
	+ "preceding-sibling::connected-routing-table/"		+ "preceding-sibling::connected-routing-table/"
	+ "name and address-family=/routing/routing-tables/"		+ "name and address-family=/routing/routing-tables/"
	+ "routing-table[name=current()/name]/"		+ "routing-table[name=current()/name]/"
	+ "address-family and safi=/routing/routing-tables/"		+ "address-family and safi=/routing/routing-tables/"
	+ "routing-table[name=current()/name]/safi])" {		+ "routing-table[name=current()/name]/safi])" {
	error-message "Duplicate address family for "		error-message "Duplicate address family for "
	skipping to change at page 31, line 4		skipping to change at page 38, line 33
	+ "preceding-sibling::connected-routing-table/"		+ "preceding-sibling::connected-routing-table/"
	+ "name and address-family=/routing/routing-tables/"		+ "name and address-family=/routing/routing-tables/"
	+ "routing-table[name=current()/name]/"		+ "routing-table[name=current()/name]/"
	+ "address-family and safi=/routing/routing-tables/"		+ "address-family and safi=/routing/routing-tables/"
	+ "routing-table[name=current()/name]/safi])" {		+ "routing-table[name=current()/name]/safi])" {
	error-message "Duplicate address family for "		error-message "Duplicate address family for "
	+ "connected routing tables.";		+ "connected routing tables.";
	description		description
	"For each AFN/SAFI pair there MUST NOT be more than		"For each AFN/SAFI pair there MUST NOT be more than
	one connected routing table.";		one connected routing table.";
	}		}
	key "name";		key "name";
	description		description
	"List of routing tables to which the routing protocol		"List of routing tables to which the routing protocol
	instance is connected (at most one routing table per		instance is connected (at most one routing table per
	address family).		address family).
	If no connected routing table is configured for an		If no connected routing table is configured for an
	address family, the routing protocol MUST be		address family, the routing protocol is connected to
	operationally connected to the main routing table		the default routing table for that address family.
	for that address family.
	";		";
	leaf name {		leaf name {
	type routing-table-ref;		type routing-table-ref;
	must "../../../type != 'rt:direct' or "		must "../../../type != 'rt:direct' or "
	+ "../../../../../main-routing-tables/ "		+ "../../../../../default-routing-tables/ "
	+ "main-routing-table/name=." {		+ "default-routing-table/name=." {
	error-message "The 'direct' protocol can be "		error-message "The 'direct' protocol can be "
	+ "connected only to a main routing "		+ "connected only to a default "
	+ "table.";		+ "routing table.";
	description		description
	"For the 'direct' pseudo-protocol, the connected		"For the 'direct' pseudo-protocol, the connected
	routing table must always be a main routing		routing table must always be a default routing
	table.";		table.";
	}		}
	description		description
	"Name of an existing routing table.";		"Name of an existing routing table.";
	}		}
	leaf import-filter {		leaf import-filter {
	type route-filter-ref;		type route-filter-ref;
	description		description
	"Reference to a route filter that is used for		"Configuration of import filter.";
	filtering routes passed from this routing protocol
	instance to the routing table specified by the
	'name' sibling node.
	If this leaf is not present, the behavior is
	protocol-specific, but typically it means that all
	routes are accepted.
	";
	}		}
	leaf export-filter {		leaf export-filter {
	type route-filter-ref;		type route-filter-ref;
	description		description
	"Reference to a route filter that is used for		"Configuration of export filter.";
	filtering routes passed from the routing table
	specified by the 'name' sibling node to this
	routing protocol instance.
	If this leaf is not present, the behavior is
	protocol-specific - typically it means that all
	routes are accepted.
	The 'direct' and 'static' pseudo-protocols accept
	no routes from any routing table.
	";
	}		}
	}		}
	}		}
	container static-routes {		container static-routes {
	when "../type='rt:static'" {		when "../type='rt:static'" {
	description		description
	"This container is only valid for the 'static'		"This container is only valid for the 'static'
	routing protocol.";		routing protocol.";
	}		}
	description		description
	"Configuration of 'static' pseudo-protocol.		"Configuration of the 'static' pseudo-protocol.
	Address family specific modules augment this node with		Address family specific modules augment this node with
	their lists of routes.		their lists of routes.
	";		";
	}		}
	}		}
	}		}
	}		}
	container routing-tables {		container routing-tables {
	description		description
	"Container for configured routing tables.";		"Configured routing tables.";
	list routing-table {		list routing-table {
	key "name";		key "name";
	description		description
	"Each entry represents a routing table identified by the		"Each entry represents a configured routing table
	'name' key. All routes in a routing table MUST belong to		identified by the 'name' key.
	the same address family.";
			Entries having the same key as a system-provided entry of
			the list /routing-state/routing-tables/routing-tables are
			used for configuring parameters of that entry. Other
			entries define additional user-provided routing tables.
			";
	leaf name {		leaf name {
	type string;		type string;
	description		description
	"An arbitrary name of the routing table.";		"The name of the routing table.";
	}		}
	uses afn-safi;		uses afn-safi;
	leaf description {		leaf description {
	type string;		type string;
	description		description
	"Textual description of the routing table.";		"Textual description of the routing table.";
	}		}
	container routes {
	config "false";
	description
	"Current contents of the routing table (state data).";
	list route {
	description
	"A routing table entry. This data node MUST be
	augmented with information specific for routes of each
	address family.";
	uses route-content;
	leaf source-protocol {
	type string;
	mandatory "true";
	description
	'Routing protocol instance from which the route
	originated.
	It must be either "direct" or the name of a
	configured routing protocol instance.
	';
	}
	leaf last-updated {
	type yang:date-and-time;
	description
	"Time stamp of the last modification of the route. If
	the route was never modified, it is the time when
	the route was inserted into the routing table.";
	}
	}
	}
	container recipient-routing-tables {		container recipient-routing-tables {
			if-feature user-defined-routing-tables;
	description		description
	"Container for recipient routing tables.";		"Configuration of recipient routing tables.";
	list recipient-routing-table {		list recipient-routing-table {
	must "name != ../../name" {		must "name != ../../name" {
	error-message "Source and recipient routing tables "		error-message "Source and recipient routing tables "
	+ "are identical.";		+ "are identical.";
	description		description
	"A routing table MUST NOT appear among its recipient		"A routing table MUST NOT appear among its recipient
	routing tables.";		routing tables.";
	}		}
	must "/routing/routing-tables/"		must "/routing/routing-tables/"
	+ "routing-table[name=current()/name]/"		+ "routing-table[name=current()/name]/"
	skipping to change at page 34, line 4		skipping to change at page 40, line 38
	}		}
	must "/routing/routing-tables/"		must "/routing/routing-tables/"
	+ "routing-table[name=current()/name]/"		+ "routing-table[name=current()/name]/"
	+ "address-family=../../address-family and /routing/"		+ "address-family=../../address-family and /routing/"
	+ "routing-tables/routing-table[name=current()/name]/"		+ "routing-tables/routing-table[name=current()/name]/"
	+ "safi=../../safi" {		+ "safi=../../safi" {
	error-message "Address family mismatch.";		error-message "Address family mismatch.";
	description		description
	"Address family of the recipient routing table MUST		"Address family of the recipient routing table MUST
	match the source table.";		match the source table.";
	}		}
	key "name";		key "name";
	description		description
	"List of routing tables that receive routes from this		"Each entry configures a recipient routing table.";
	routing table.";
	leaf name {		leaf name {
	type routing-table-ref;		type routing-table-ref;
	description		description
	"The name of the recipient routing table.";		"The name of the recipient routing table.";
	}		}
	leaf filter {		leaf filter {
	type route-filter-ref;		type route-filter-ref;
	description		description
	"A route filter which is applied to the routes passed		"A route filter which is applied to the routes passed
	to the recipient routing table.";		to the recipient routing table.";
	skipping to change at page 34, line 21		skipping to change at page 41, line 4
	type routing-table-ref;		type routing-table-ref;
	description		description
	"The name of the recipient routing table.";		"The name of the recipient routing table.";
	}		}
	leaf filter {		leaf filter {
	type route-filter-ref;		type route-filter-ref;
	description		description
	"A route filter which is applied to the routes passed		"A route filter which is applied to the routes passed
	to the recipient routing table.";		to the recipient routing table.";
	}		}
	}		}
	}		}
	}		}
	}		}
	container route-filters {		container route-filters {
	description		description
	"Container for configured route filters.";		"Configuration of route filters.";
	list route-filter {		list route-filter {
	key "name";		key "name";
	description		description
	"Route filters are used for filtering and/or manipulating		"Each entry configures a named route filter.";
	routes that are passed between a routing protocol and a
	routing table and vice versa, or between two routing
	tables.
	It is expected that other modules augment this list with
	contents specific for a particular route filter type.
	";
	leaf name {		leaf name {
	type string;		type string;
	description		description
	"An arbitrary name of the route filter.";		"The name of the route filter.";
	}		}
	leaf description {		leaf description {
	type string;		type string;
	description		description
	"Textual description of the route filter.";		"Textual description of the route filter.";
	}		}
	leaf type {		leaf type {
	type identityref {		type identityref {
	base route-filter;		base route-filter;
	}		}
	mandatory "true";		mandatory "true";
	description		description
	"Type of the route-filter - an identity derived from the		"Type of the route filter..";
	'route-filter' base identity.";
	}		}
	}		}
	}		}
	}		}
	}		}
	<CODE ENDS>		<CODE ENDS>
	7. IPv4 Unicast Routing YANG Module		7. IPv4 Unicast Routing YANG Module
	RFC Ed.: In this section, replace all occurrences of 'XXXX' with the		RFC Ed.: In this section, replace all occurrences of 'XXXX' with the
	actual RFC number and all occurrences of the revision date below with		actual RFC number and all occurrences of the revision date below with
	the date of RFC publication (and remove this note).		the date of RFC publication (and remove this note).
	<CODE BEGINS> file "ietf-ipv4-unicast-routing@2013-02-23.yang"		<CODE BEGINS> file "ietf-ipv4-unicast-routing@2013-07-13.yang"
	module ietf-ipv4-unicast-routing {		module ietf-ipv4-unicast-routing {
	namespace "urn:ietf:params:xml:ns:yang:ietf-ipv4-unicast-routing";		namespace "urn:ietf:params:xml:ns:yang:ietf-ipv4-unicast-routing";
	prefix "v4ur";		prefix "v4ur";
	import ietf-routing {		import ietf-routing {
	prefix "rt";		prefix "rt";
	}		}
	skipping to change at page 36, line 46		skipping to change at page 42, line 46
	WG Chair: Juergen Schoenwaelder		WG Chair: Juergen Schoenwaelder
	<mailto:j.schoenwaelder@jacobs-university.de>		<mailto:j.schoenwaelder@jacobs-university.de>
	Editor: Ladislav Lhotka		Editor: Ladislav Lhotka
	<mailto:lhotka@nic.cz>		<mailto:lhotka@nic.cz>
	";		";
	description		description
	"This YANG module augments the 'ietf-routing' module with basic		"This YANG module augments the 'ietf-routing' module with basic
	configuration and state data for IPv4 unicast routing.		configuration and operational state data for IPv4 unicast
			routing.
	Copyright (c) 2012 IETF Trust and the persons identified as		Copyright (c) 2013 IETF Trust and the persons identified as
	authors of the code. All rights reserved.		authors of the code. All rights reserved.
	Redistribution and use in source and binary forms, with or		Redistribution and use in source and binary forms, with or
	without modification, is permitted pursuant to, and subject to		without modification, is permitted pursuant to, and subject to
	the license terms contained in, the Simplified BSD License set		the license terms contained in, the Simplified BSD License set
	forth in Section 4.c of the IETF Trust's Legal Provisions		forth in Section 4.c of the IETF Trust's Legal Provisions
	Relating to IETF Documents		Relating to IETF Documents
	(http://trustee.ietf.org/license-info).		(http://trustee.ietf.org/license-info).
	This version of this YANG module is part of RFC XXXX; see the		This version of this YANG module is part of RFC XXXX; see the
	RFC itself for full legal notices.		RFC itself for full legal notices.
	";		";
	revision 2013-02-23 {		revision 2013-07-13 {
	description		description
	"Initial revision.";		"Initial revision.";
	reference		reference
	"RFC XXXX: A YANG Data Model for Routing Management";		"RFC XXXX: A YANG Data Model for Routing Management";
	}		}
	/* Groupings */		/* Groupings */
	grouping route-content {		grouping route-content {
	description		description
	skipping to change at page 37, line 51		skipping to change at page 44, line 4
	description		description
	"This augment is valid only for IPv4 unicast.";		"This augment is valid only for IPv4 unicast.";
	}		}
	description		description
	"The 'address' leaf augments the 'rt:destination-address'		"The 'address' leaf augments the 'rt:destination-address'
	parameter of the 'rt:active-route' operation.";		parameter of the 'rt:active-route' operation.";
	leaf address {		leaf address {
	type inet:ipv4-address;		type inet:ipv4-address;
	description		description
	"IPv4 destination address.";		"IPv4 destination address.";
	}
			}
	}		}
	augment "/rt:active-route/rt:output/rt:route" {		augment "/rt:active-route/rt:output/rt:route" {
	when "rt:address-family='ipv4' and rt:safi='nlri-unicast'" {		when "rt:address-family='ipv4' and rt:safi='nlri-unicast'" {
	description		description
	"This augment is valid only for IPv4 unicast.";		"This augment is valid only for IPv4 unicast.";
	}		}
	description		description
	"Contents of the reply to 'rt:active-route' operation.";		"Contents of the reply to 'rt:active-route' operation.";
	uses route-content;		uses route-content;
	}		}
	/* Data nodes */		/* Operational state */
			augment "/rt:routing-state/rt:routing-tables/rt:routing-table/"
			+ "rt:routes/rt:route" {
			when "../../rt:address-family = 'ipv4' and ../../rt:safi = "
			+ "'nlri-unicast'" {
			description
			"This augment is valid only for IPv4 unicast.";
			}
			description
			"This augment defines the content of IPv4 unicast routes.";
			uses route-content;
			}
			/* Configuration */
	augment "/rt:routing/rt:router/rt:routing-protocols/"		augment "/rt:routing/rt:router/rt:routing-protocols/"
	+ "rt:routing-protocol/rt:static-routes" {		+ "rt:routing-protocol/rt:static-routes" {
	description		description
	"This augment defines the configuration of the 'static'		"This augment defines the configuration of the 'static'
	pseudo-protocol with data specific for IPv4 unicast.";		pseudo-protocol with data specific for IPv4 unicast.";
	container ipv4 {		container ipv4 {
	description		description
	"Configuration of a 'static' pseudo-protocol instance		"Configuration of a 'static' pseudo-protocol instance
	consists of a list of routes.";		consists of a list of routes.";
	skipping to change at page 39, line 4		skipping to change at page 45, line 19
	}		}
	leaf description {		leaf description {
	type string;		type string;
	description		description
	"Textual description of the route.";		"Textual description of the route.";
	}		}
	uses rt:route-content;		uses rt:route-content;
	uses route-content {		uses route-content {
	refine "dest-prefix" {		refine "dest-prefix" {
	mandatory "true";		mandatory "true";
	}		}
	}		}
	}		}
	}		}
	}		}
	augment "/rt:routing/rt:routing-tables/rt:routing-table/rt:routes/"
	+ "rt:route" {
	when "../../rt:address-family = 'ipv4' and ../../rt:safi = "
	+ "'nlri-unicast'" {
	description
	"This augment is valid only for IPv4 unicast.";
	}
	description
	"This augment defines the content of IPv4 unicast routes.";
	uses route-content;
	}
	}		}
	<CODE ENDS>		<CODE ENDS>
	8. IPv6 Unicast Routing YANG Module		8. IPv6 Unicast Routing YANG Module
	RFC Ed.: In this section, replace all occurrences of 'XXXX' with the		RFC Ed.: In this section, replace all occurrences of 'XXXX' with the
	actual RFC number and all occurrences of the revision date below with		actual RFC number and all occurrences of the revision date below with
	the date of RFC publication (and remove this note).		the date of RFC publication (and remove this note).
	<CODE BEGINS> file "ietf-ipv6-unicast-routing@2013-02-23.yang"		<CODE BEGINS> file "ietf-ipv6-unicast-routing@2013-07-13.yang"
	module ietf-ipv6-unicast-routing {		module ietf-ipv6-unicast-routing {
	namespace "urn:ietf:params:xml:ns:yang:ietf-ipv6-unicast-routing";		namespace "urn:ietf:params:xml:ns:yang:ietf-ipv6-unicast-routing";
	prefix "v6ur";		prefix "v6ur";
	import ietf-routing {		import ietf-routing {
	prefix "rt";		prefix "rt";
	}		}
	skipping to change at page 41, line 5		skipping to change at page 47, line 5
	WG Chair: Juergen Schoenwaelder		WG Chair: Juergen Schoenwaelder
	<mailto:j.schoenwaelder@jacobs-university.de>		<mailto:j.schoenwaelder@jacobs-university.de>
	Editor: Ladislav Lhotka		Editor: Ladislav Lhotka
	<mailto:lhotka@nic.cz>		<mailto:lhotka@nic.cz>
	";		";
	description		description
	"This YANG module augments the 'ietf-routing' module with basic		"This YANG module augments the 'ietf-routing' module with basic
	configuration and state data for IPv6 unicast routing.		configuration and operational state data for IPv6 unicast
			routing.
	Copyright (c) 2012 IETF Trust and the persons identified as		Copyright (c) 2013 IETF Trust and the persons identified as
	authors of the code. All rights reserved.		authors of the code. All rights reserved.
	Redistribution and use in source and binary forms, with or		Redistribution and use in source and binary forms, with or
	without modification, is permitted pursuant to, and subject to		without modification, is permitted pursuant to, and subject to
	the license terms contained in, the Simplified BSD License set		the license terms contained in, the Simplified BSD License set
	forth in Section 4.c of the IETF Trust's Legal Provisions		forth in Section 4.c of the IETF Trust's Legal Provisions
	Relating to IETF Documents		Relating to IETF Documents
	(http://trustee.ietf.org/license-info).		(http://trustee.ietf.org/license-info).
	This version of this YANG module is part of RFC XXXX; see the		This version of this YANG module is part of RFC XXXX; see the
	RFC itself for full legal notices.		RFC itself for full legal notices.
	";		";
	revision 2013-02-23 {		revision 2013-07-13 {
	description		description
	"Initial revision.";		"Initial revision.";
	reference		reference
	"RFC XXXX: A YANG Data Model for Routing Management";		"RFC XXXX: A YANG Data Model for Routing Management";
	}		}
	/* Groupings */		/* Groupings */
	grouping route-content {		grouping route-content {
	description		description
	skipping to change at page 42, line 24		skipping to change at page 48, line 26
	augment "/rt:active-route/rt:output/rt:route" {		augment "/rt:active-route/rt:output/rt:route" {
	when "rt:address-family='ipv6' and rt:safi='nlri-unicast'" {		when "rt:address-family='ipv6' and rt:safi='nlri-unicast'" {
	description		description
	"This augment is valid only for IPv6 unicast.";		"This augment is valid only for IPv6 unicast.";
	}		}
	description		description
	"Contents of the reply to 'rt:active-route' operation.";		"Contents of the reply to 'rt:active-route' operation.";
	uses route-content;		uses route-content;
	}		}
	/* Data nodes */		/* Operational state data */
	augment "/rt:routing/rt:router/rt:interfaces/rt:interface" {		augment "/rt:routing-state/rt:router/rt:interfaces/rt:interface" {
	when "/if:interfaces/if:interface[if:name=current()/rt:name]/"		when "/if:interfaces/if:interface[if:name=current()/rt:name]/"
	+ "ip:ipv6/ip:enabled='true'" {		+ "ip:ipv6/ip:enabled='true'" {
	description		description
	"This augment is only valid for router interfaces with		"This augment is only valid for router interfaces with
	enabled IPv6.";		enabled IPv6.";
	}		}
	description		description
	"IPv6-specific parameters of router interfaces.";		"IPv6-specific parameters of router interfaces.";
	container ipv6-router-advertisements {		container ipv6-router-advertisements {
	description		description
	skipping to change at page 43, line 20		skipping to change at page 49, line 20
	multicast Router Advertisements from the interface.";		multicast Router Advertisements from the interface.";
	reference		reference
	"RFC 4861: Neighbor Discovery for IP version 6 (IPv6) -		"RFC 4861: Neighbor Discovery for IP version 6 (IPv6) -
	MaxRtrAdvInterval.";		MaxRtrAdvInterval.";
	}		}
	leaf min-rtr-adv-interval {		leaf min-rtr-adv-interval {
	type uint16 {		type uint16 {
	range "3..1350";		range "3..1350";
	}		}
	units "seconds";		units "seconds";
	must ". <= 0.75 * ../max-rtr-adv-interval" {
	description
	"The value MUST NOT be greater than 75 % of
	'max-rtr-adv-interval'.";
	}
	description		description
	"The minimum time allowed between sending unsolicited		"The minimum time allowed between sending unsolicited
	multicast Router Advertisements from the interface.		multicast Router Advertisements from the interface.
	The default value to be used operationally if this leaf is		The default value to be used operationally if this leaf is
	not configured is determined as follows:		not configured is determined as follows:
	- if max-rtr-adv-interval >= 9 seconds, the default value		- if max-rtr-adv-interval >= 9 seconds, the default value
	is 0.33 * max-rtr-adv-interval;		is 0.33 * max-rtr-adv-interval;
	skipping to change at page 45, line 45		skipping to change at page 51, line 41
	If this parameter is not configured, a value of 3 *		If this parameter is not configured, a value of 3 *
	max-rtr-adv-interval SHOULD be used.		max-rtr-adv-interval SHOULD be used.
	";		";
	reference		reference
	"RFC 4861: Neighbor Discovery for IP version 6 (IPv6) -		"RFC 4861: Neighbor Discovery for IP version 6 (IPv6) -
	AdvDefaultLifeTime.";		AdvDefaultLifeTime.";
	}		}
	container prefix-list {		container prefix-list {
	description		description
	"A list of prefixes to be placed in Prefix Information		"A list of prefixes that are placed in Prefix Information
	options in Router Advertisement messages sent from the		options in Router Advertisement messages sent from the
	interface.		interface.
	By default, all prefixes that the router advertises via		By default, these are all prefixes that the router
	routing protocols as being on-link for the interface from		advertises via routing protocols as being on-link for the
	which the advertisement is sent.		interface from which the advertisement is sent.
	Prefixes that do not have their entries in the child
	'prefix' list are advertised with the default values of
	all parameters.
	The link-local prefix SHOULD NOT be included in the list		The link-local prefix SHOULD NOT be included in the list
	of advertised prefixes.		of advertised prefixes.
	";		";
	reference		reference
	"RFC 4861: Neighbor Discovery for IP version 6 (IPv6) -		"RFC 4861: Neighbor Discovery for IP version 6 (IPv6) -
	AdvPrefixList.";		AdvPrefixList.";
	list prefix {		list prefix {
	key "prefix-spec";		key "prefix-spec";
	description		description
			"Advertised prefix entry with parameters.";
			leaf prefix-spec {
			type inet:ipv6-prefix;
			description
			"IPv6 address prefix.";
			}
			leaf valid-lifetime {
			type uint32;
			units "seconds";
			default "2592000";
			description
			"The value to be placed in the Valid Lifetime in the
			Prefix Information option. The designated value of all
			1's (0xffffffff) represents infinity.
			";
			reference
			"RFC 4861: Neighbor Discovery for IP version 6 (IPv6) -
			AdvValidLifetime.";
			}
			leaf on-link-flag {
			type boolean;
			default "true";
			description
			"The value to be placed in the on-link flag ('L-bit')
			field in the Prefix Information option.";
			reference
			"RFC 4861: Neighbor Discovery for IP version 6 (IPv6) -
			AdvOnLinkFlag.";
			}
			leaf preferred-lifetime {
			type uint32;
			units "seconds";
			default "604800";
			description
			"The value to be placed in the Preferred Lifetime in
			the Prefix Information option, in seconds. The
			designated value of all 1's (0xffffffff) represents
			infinity.";
			reference
			"RFC 4861: Neighbor Discovery for IP version 6 (IPv6) -
			AdvPreferredLifetime.";
			}
			leaf autonomous-flag {
			type boolean;
			default "true";
			description
			"The value to be placed in the Autonomous Flag field in
			the Prefix Information option.";
			reference
			"RFC 4861: Neighbor Discovery for IP version 6 (IPv6) -
			AdvAutonomousFlag.";
			}
			}
			}
			}
			}
			augment "/rt:routing-state/rt:routing-tables/rt:routing-table/"
			+ "rt:routes/rt:route" {
			when "../../rt:address-family = 'ipv6' and ../../rt:safi = "
			+ "'nlri-unicast'" {
			description
			"This augment is valid only for IPv6 unicast.";
			}
			description
			"This augment defines the content of IPv6 unicast routes.";
			uses route-content;
			}
			/* Configuration */
			augment "/rt:routing/rt:router/rt:interfaces/rt:interface" {
			when "/if:interfaces/if:interface[if:name=current()/rt:name]/"
			+ "ip:ipv6/ip:enabled='true'" {
			description
			"This augment is only valid for router interfaces with
			enabled IPv6.";
			}
			description
			"Configuration of IPv6-specific parameters of router
			interfaces.";
			container ipv6-router-advertisements {
			description
			"Configuration of IPv6 Router Advertisements.
			See the corresponding parameters under /rt:routing-state for
			detailed descriptions and references.
			";
			leaf send-advertisements {
			type boolean;
			default "false";
			description
			"A flag indicating whether or not the router sends periodic
			Router Advertisements and responds to Router
			Solicitations.";
			}
			leaf max-rtr-adv-interval {
			type uint16 {
			range "4..1800";
			}
			units "seconds";
			default "600";
			description
			"The maximum time allowed between sending unsolicited
			multicast Router Advertisements from the interface.";
			}
			leaf min-rtr-adv-interval {
			type uint16 {
			range "3..1350";
			}
			units "seconds";
			must ". <= 0.75 * ../max-rtr-adv-interval" {
			description
			"The value MUST NOT be greater than 75 % of
			'max-rtr-adv-interval'.";
			}
			description
			"The minimum time allowed between sending unsolicited
			multicast Router Advertisements from the interface.
			";
			}
			leaf managed-flag {
			type boolean;
			default "false";
			description
			"The boolean value to be placed in the 'Managed address
			configuration' flag field in the Router Advertisement.";
			}
			leaf other-config-flag {
			type boolean;
			default "false";
			description
			"The boolean value to be placed in the 'Other
			configuration' flag field in the Router Advertisement.";
			}
			leaf link-mtu {
			type uint32;
			default "0";
			description
			"The value to be placed in MTU options sent by the router.
			A value of zero indicates that no MTU options are sent.";
			}
			leaf reachable-time {
			type uint32 {
			range "0..3600000";
			}
			units "milliseconds";
			default "0";
			description
			"The value to be placed in the Reachable Time field in the
			Router Advertisement messages sent by the router. The
			value zero means unspecified (by this router).";
			}
			leaf retrans-timer {
			type uint32;
			units "milliseconds";
			default "0";
			description
			"The value to be placed in the Retrans Timer field in the
			Router Advertisement messages sent by the router. The
			value zero means unspecified (by this router).";
			}
			leaf cur-hop-limit {
			type uint8;
			default "64";
			description
			"The default value to be placed in the Cur Hop Limit field
			in the Router Advertisement messages sent by the router.
			";
			}
			leaf default-lifetime {
			type uint16 {
			range "0..9000";
			}
			units "seconds";
			description
			"The value to be placed in the Router Lifetime field of
			Router Advertisements sent from the interface, in seconds.
			";
			}
			container prefix-list {
			description
			"Configuration of prefixes to be placed in Prefix
			Information options in Router Advertisement messages sent
			from the interface.
			Prefixes that are advertised by default but do not have
			their entries in the child 'prefix' list are advertised
			with the default values of all parameters.
			";
			list prefix {
			key "prefix-spec";
			description
	"Advertised prefix entry.";		"Advertised prefix entry.";
	leaf prefix-spec {		leaf prefix-spec {
	type inet:ipv6-prefix;		type inet:ipv6-prefix;
	description		description
	"IPv6 address prefix.";		"IPv6 address prefix.";
	}		}
	choice control-adv-prefixes {		choice control-adv-prefixes {
	default "advertise";		default "advertise";
	description		description
	"The prefix either may be explicitly removed from the		"The prefix either may be explicitly removed from the
	skipping to change at page 46, line 46		skipping to change at page 56, line 40
	default set of advertised prefixes.		default set of advertised prefixes.
	";		";
	}		}
	case advertise {		case advertise {
	leaf valid-lifetime {		leaf valid-lifetime {
	type uint32;		type uint32;
	units "seconds";		units "seconds";
	default "2592000";		default "2592000";
	description		description
	"The value to be placed in the Valid Lifetime in		"The value to be placed in the Valid Lifetime in
	the Prefix Information option, in seconds. The		the Prefix Information option.";
	designated value of all 1's (0xffffffff)
	represents infinity.
	";
	reference
	"RFC 4861: Neighbor Discovery for IP version 6
	(IPv6) - AdvValidLifetime.";
	}		}
	leaf on-link-flag {		leaf on-link-flag {
	type boolean;		type boolean;
	default "true";		default "true";
	description		description
	"The value to be placed in the on-link flag		"The value to be placed in the on-link flag
	('L-bit') field in the Prefix Information		('L-bit') field in the Prefix Information
	option.";		option.";
	reference
	"RFC 4861: Neighbor Discovery for IP version 6
	(IPv6) - AdvOnLinkFlag.";
	}		}
	leaf preferred-lifetime {		leaf preferred-lifetime {
	type uint32;		type uint32;
	units "seconds";		units "seconds";
	must ". <= ../valid-lifetime" {		must ". <= ../valid-lifetime" {
	description		description
	"This value MUST NOT be greater than		"This value MUST NOT be greater than
	valid-lifetime.";		valid-lifetime.";
	}		}
	default "604800";		default "604800";
	description		description
	"The value to be placed in the Preferred Lifetime		"The value to be placed in the Preferred Lifetime
	in the Prefix Information option, in seconds. The		in the Prefix Information option.";
	designated value of all 1's (0xffffffff)
	represents infinity.
	";
	reference
	"RFC 4861: Neighbor Discovery for IP version 6
	(IPv6) - AdvPreferredLifetime.";
	}		}
	leaf autonomous-flag {		leaf autonomous-flag {
	type boolean;		type boolean;
	default "true";		default "true";
	description		description
	"The value to be placed in the Autonomous Flag		"The value to be placed in the Autonomous Flag
	field in the Prefix Information option.";		field in the Prefix Information option.";
	reference
	"RFC 4861: Neighbor Discovery for IP version 6
	(IPv6) - AdvAutonomousFlag.";
	}		}
	}		}
	}		}
	}		}
	}		}
	}		}
	}		}
	augment "/rt:routing/rt:router/rt:routing-protocols/"		augment "/rt:routing/rt:router/rt:routing-protocols/"
	+ "rt:routing-protocol/rt:static-routes" {		+ "rt:routing-protocol/rt:static-routes" {
	description		description
	"This augment defines the configuration of the 'static'		"This augment defines the configuration of the 'static'
	pseudo-protocol with data specific for IPv6 unicast.";		pseudo-protocol with data specific for IPv6 unicast.";
	container ipv6 {		container ipv6 {
	description		description
	"Configuration of a 'static' pseudo-protocol instance		"Configuration of a 'static' pseudo-protocol instance
	consists of a list of routes.";		consists of a list of routes.";
	list route {		list route {
	skipping to change at page 48, line 43		skipping to change at page 58, line 20
	}		}
	uses rt:route-content;		uses rt:route-content;
	uses route-content {		uses route-content {
	refine "dest-prefix" {		refine "dest-prefix" {
	mandatory "true";		mandatory "true";
	}		}
	}		}
	}		}
	}		}
	}		}
	augment "/rt:routing/rt:routing-tables/rt:routing-table/rt:routes/"
	+ "rt:route" {
	when "../../rt:address-family = 'ipv6' and ../../rt:safi = "
	+ "'nlri-unicast'" {
	description
	"This augment is valid only for IPv6 unicast.";
	}
	description
	"This augment defines the content of IPv6 unicast routes.";
	uses route-content;
	}
	}		}
	<CODE ENDS>		<CODE ENDS>
	9. IANA Considerations		9. IANA Considerations
	RFC Ed.: In this section, replace all occurrences of 'XXXX' with the		RFC Ed.: In this section, replace all occurrences of 'XXXX' with the
	actual RFC number (and remove this note).		actual RFC number (and remove this note).
	This document registers the following namespace URIs in the IETF XML		This document registers the following namespace URIs in the IETF XML
	skipping to change at page 52, line 14		skipping to change at page 61, line 14
	10. Security Considerations		10. Security Considerations
	Configuration and state data conforming to the core routing data		Configuration and state data conforming to the core routing data
	model (defined in this document) are designed to be accessed via the		model (defined in this document) are designed to be accessed via the
	NETCONF protocol [RFC6241]. The lowest NETCONF layer is the secure		NETCONF protocol [RFC6241]. The lowest NETCONF layer is the secure
	transport layer and the mandatory-to-implement secure transport is		transport layer and the mandatory-to-implement secure transport is
	SSH [RFC6242].		SSH [RFC6242].
	A number of data nodes defined in the YANG modules belonging to the		A number of data nodes defined in the YANG modules belonging to the
	core routing data model are writable/creatable/deletable (i.e.,		configuration part of the core routing data model are writable/
	"config true" in YANG terms, which is the default). These data nodes		creatable/deletable (i.e., "config true" in YANG terms, which is the
	may be considered sensitive or vulnerable in some network		default). These data nodes may be considered sensitive or vulnerable
	environments. Write operations to these data nodes, such as "edit-		in some network environments. Write operations to these data nodes,
	config", can have negative effects on the network if the protocol		such as "edit-config", can have negative effects on the network if
	operations are not properly protected.		the protocol operations are not properly protected.
	The vulnerable "config true" subtrees and data nodes are the		The vulnerable "config true" subtrees and data nodes are the
	following:		following:
	/routing/router/interfaces/interface This list assigns a network		/routing/router/interfaces/interface This list assigns a network
	layer interface to a router instance and may also specify		layer interface to a router instance and may also specify
	interface parameters related to routing.		interface parameters related to routing.
	/routing/router/routing-protocols/routing-protocol This list		/routing/router/routing-protocols/routing-protocol This list
	specifies the routing protocols configured on a device.		specifies the routing protocols configured on a device.
	skipping to change at page 53, line 8		skipping to change at page 62, line 8
	configured routing tables used by the device.		configured routing tables used by the device.
	Unauthorized access to any of these lists can adversely affect the		Unauthorized access to any of these lists can adversely affect the
	routing subsystem of both the local device and the network. This may		routing subsystem of both the local device and the network. This may
	lead to network malfunctions, delivery of packets to inappropriate		lead to network malfunctions, delivery of packets to inappropriate
	destinations and other problems.		destinations and other problems.
	11. Acknowledgments		11. Acknowledgments
	The author wishes to thank Martin Bjorklund, Joel Halpern,		The author wishes to thank Martin Bjorklund, Joel Halpern,
	Wes Hardaker, Andrew McGregor, Thomas Morin, Tom Petch,		Wes Hardaker, Andrew McGregor, Xiang Li, Thomas Morin, Tom Petch,
	Bruno Rijsman, Juergen Schoenwaelder, Phil Shafer, Dave Thaler and		Bruno Rijsman, Juergen Schoenwaelder, Phil Shafer, Dave Thaler and
	Yi Yang for their helpful comments and suggestions.		Yi Yang for their helpful comments and suggestions.
	12. References		12. References
	12.1. Normative References		12.1. Normative References
	[IANA-IF-AF]		[IANA-AF] Bjorklund, M., "IANA Address Family Numbers and Subsequent
	Bjorklund, M., "IANA Interface Type and Address Family		Address Family Identifiers YANG Module",
	YANG Modules", draft-ietf-netmod-iana-if-type-04 (work in		draft-ietf-netmod-iana-afn-safi-00 (work in progress),
	progress), June 2012.		July 2013.
	[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate		[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
	Requirement Levels", BCP 14, RFC 2119, March 1997.		Requirement Levels", BCP 14, RFC 2119, March 1997.
	[RFC3688] Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,		[RFC3688] Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,
	January 2004.		January 2004.
	[RFC4861] Narten, T., Nordmark, E., Simpson, W., and H. Soliman,		[RFC4861] Narten, T., Nordmark, E., Simpson, W., and H. Soliman,
	"Neighbor Discovery for IP version 6 (IPv6)", RFC 4861,		"Neighbor Discovery for IP version 6 (IPv6)", RFC 4861,
	September 2007.		September 2007.
	[RFC6020] Bjorklund, M., Ed., "YANG - A Data Modeling Language for		[RFC6020] Bjorklund, M., Ed., "YANG - A Data Modeling Language for
	Network Configuration Protocol (NETCONF)", RFC 6020,		Network Configuration Protocol (NETCONF)", RFC 6020,
	September 2010.		September 2010.
	[RFC6021bis]		[RFC6021bis]
	Schoenwaelder, J., Ed., "Common YANG Data Types",		Schoenwaelder, J., Ed., "Common YANG Data Types",
	draft-ietf-netmod-rfc6021-bis-00 (work in progress),		draft-ietf-netmod-rfc6021-bis-03 (work in progress),
	February 2013.		May 2013.
	[RFC6241] Enns, R., Bjorklund, M., Schoenwaelder, J., and A.		[RFC6241] Enns, R., Bjorklund, M., Schoenwaelder, J., and A.
	Bierman, "NETCONF Configuration Protocol", RFC 6241,		Bierman, "NETCONF Configuration Protocol", RFC 6241,
	June 2011.		June 2011.
	[YANG-IF] Bjorklund, M., "A YANG Data Model for Interface		[YANG-IF] Bjorklund, M., "A YANG Data Model for Interface
	Configuration", draft-ietf-netmod-interfaces-cfg-09 (work		Management", draft-ietf-netmod-interfaces-cfg-12 (work in
	in progress), February 2013.		progress), July 2013.
	[YANG-IP] Bjorklund, M., "A YANG Data Model for IP Configuration",		[YANG-IP] Bjorklund, M., "A YANG Data Model for IP Management",
	draft-ietf-netmod-ip-cfg-09 (work in progress),		draft-ietf-netmod-ip-cfg-09 (work in progress),
	February 2013.		February 2013.
	12.2. Informative References		12.2. Informative References
	[RFC6087] Bierman, A., "Guidelines for Authors and Reviewers of YANG		[RFC6087] Bierman, A., "Guidelines for Authors and Reviewers of YANG
	Data Model Documents", RFC 6087, January 2011.		Data Model Documents", RFC 6087, January 2011.
	[RFC6242] Wasserman, M., "Using the NETCONF Protocol over Secure		[RFC6242] Wasserman, M., "Using the NETCONF Protocol over Secure
	Shell (SSH)", RFC 6242, June 2011.		Shell (SSH)", RFC 6242, June 2011.
	Appendix A. The Complete Data Tree		Appendix A. The Complete Data Trees
	This appendix presents the complete data tree of the core routing		This appendix presents the complete configuration and operational
	data model. See Section 2.2 for an explanation of symbols. Data		state data trees of the core routing data model.
	type of every leaf node is shown near the right end of the
	corresponding line.		See Section 2.2 for an explanation of the symbols used. Data type of
			every leaf node is shown near the right end of the corresponding
			line.
			A.1. Configuration Data
	+--rw routing		+--rw routing
	+--rw router [name]		+--rw router* [name]
	| +--rw name string		| +--rw name string
	| +--rw type? identityref		| +--rw type? identityref
	| +--rw enabled? boolean		| +--rw enabled? boolean
	| +--rw router-id? yang:dotted-quad		| +--rw router-id? yang:dotted-quad
	| +--rw description? string		| +--rw description? string
	| +--rw main-routing-tables		| +--rw default-routing-tables
	| | +--rw main-routing-table [address-family safi]		| | +--rw default-routing-table* [address-family safi]
	| | +--rw address-family ianaaf:address-family		| | +--rw address-family ianaaf:address-family
	| | +--rw safi ianaaf:subsequent-address-family		| | +--rw safi ianaaf:subsequent-address-family
	| | +--rw name? routing-table-ref		| | +--rw name string
	| +--rw interfaces		| +--rw interfaces
	| | +--rw interface [name]		| | +--rw interface* [name]
	| | +--rw name if:interface-ref		| | +--rw name if:interface-ref
	| | +--rw v6ur:ipv6-router-advertisements		| | +--rw v6ur:ipv6-router-advertisements
	| | +--rw v6ur:send-advertisements? boolean		| | +--rw v6ur:send-advertisements? boolean
	| | +--rw v6ur:max-rtr-adv-interval? uint16		| | +--rw v6ur:max-rtr-adv-interval? uint16
	| | +--rw v6ur:min-rtr-adv-interval? uint16		| | +--rw v6ur:min-rtr-adv-interval? uint16
	| | +--rw v6ur:managed-flag? boolean		| | +--rw v6ur:managed-flag? boolean
	| | +--rw v6ur:other-config-flag? boolean		| | +--rw v6ur:other-config-flag? boolean
	| | +--rw v6ur:link-mtu? uint32		| | +--rw v6ur:link-mtu? uint32
	| | +--rw v6ur:reachable-time? uint32		| | +--rw v6ur:reachable-time? uint32
	| | +--rw v6ur:retrans-timer? uint32		| | +--rw v6ur:retrans-timer? uint32
	| | +--rw v6ur:cur-hop-limit? uint8		| | +--rw v6ur:cur-hop-limit? uint8
	| | +--rw v6ur:default-lifetime? uint16		| | +--rw v6ur:default-lifetime? uint16
	| | +--rw v6ur:prefix-list		| | +--rw v6ur:prefix-list
	| | +--rw v6ur:prefix [prefix-spec]		| | +--rw v6ur:prefix* [prefix-spec]
	| | +--rw v6ur:prefix-spec inet:ipv6-prefix		| | +--rw v6ur:prefix-spec inet:ipv6-prefix
	| | +--rw (control-adv-prefixes)?		| | +--rw (control-adv-prefixes)?
	| | +--:(no-advertise)		| | +--:(no-advertise)
	| | | +--rw v6ur:no-advertise? empty		| | | +--rw v6ur:no-advertise? empty
	| | +--:(advertise)		| | +--:(advertise)
	| | +--rw v6ur:valid-lifetime? uint32		| | +--rw v6ur:valid-lifetime? uint32
	| | +--rw v6ur:on-link-flag? boolean		| | +--rw v6ur:on-link-flag? boolean
	| | +--rw v6ur:preferred-lifetime? uint32		| | +--rw v6ur:preferred-lifetime? uint32
	| | +--rw v6ur:autonomous-flag? boolean		| | +--rw v6ur:autonomous-flag? boolean
	| +--rw routing-protocols		| +--rw routing-protocols
	| +--rw routing-protocol [name]		| +--rw routing-protocol* [name]
	| +--rw name string		| +--rw name string
	| +--rw description? string		| +--rw description? string
	| +--rw enabled? boolean		| +--rw enabled? boolean
	| +--rw type identityref		| +--rw type identityref
	| +--rw connected-routing-tables		| +--rw connected-routing-tables
	| | +--rw connected-routing-table [name]		| | +--rw connected-routing-table* [name]
	| | +--rw name routing-table-ref		| | +--rw name routing-table-ref
	| | +--rw import-filter? route-filter-ref		| | +--rw import-filter? route-filter-ref
	| | +--rw export-filter? route-filter-ref		| | +--rw export-filter? route-filter-ref
	| +--rw static-routes		| +--rw static-routes
	| +--rw v4ur:ipv4		| +--rw v4ur:ipv4
	| | +--rw v4ur:route [id]		| | +--rw v4ur:route* [id]
	| | +--rw v4ur:id uint32		| | +--rw v4ur:id uint32
	| | +--rw v4ur:description? string		| | +--rw v4ur:description? string
	| | +--rw v4ur:outgoing-interface? if:interface-ref		| | +--rw v4ur:outgoing-interface? if:interface-ref
	| | +--rw v4ur:dest-prefix inet:ipv4-prefix		| | +--rw v4ur:dest-prefix inet:ipv4-prefix
	| | +--rw v4ur:next-hop? inet:ipv4-address		| | +--rw v4ur:next-hop? inet:ipv4-address
	| +--rw v6ur:ipv6		| +--rw v6ur:ipv6
	| +--rw v6ur:route [id]		| +--rw v6ur:route* [id]
	| +--rw v6ur:id uint32		| +--rw v6ur:id uint32
	| +--rw v6ur:description? string		| +--rw v6ur:description? string
	| +--rw v6ur:outgoing-interface? if:interface-ref		| +--rw v6ur:outgoing-interface? if:interface-ref
	| +--rw v6ur:dest-prefix inet:ipv6-prefix		| +--rw v6ur:dest-prefix inet:ipv6-prefix
	| +--rw v6ur:next-hop? inet:ipv6-address		| +--rw v6ur:next-hop? inet:ipv6-address
	+--rw routing-tables		+--rw routing-tables
	| +--rw routing-table [name]		| +--rw routing-table* [name]
	| +--rw name string		| +--rw name string
	| +--rw address-family ianaaf:address-family		| +--rw address-family ianaaf:address-family
	| +--rw safi ianaaf:subsequent-address-family		| +--rw safi ianaaf:subsequent-address-family
	| +--rw description? string		| +--rw description? string
	| +--ro routes
	| | +--ro route
	| | +--ro outgoing-interface? if:interface-ref
	| | +--ro source-protocol string
	| | +--ro last-updated? yang:date-and-time
	| | +--ro v4ur:dest-prefix? inet:ipv4-prefix
	| | +--ro v4ur:next-hop? inet:ipv4-address
	| | +--ro v6ur:dest-prefix? inet:ipv6-prefix
	| | +--ro v6ur:next-hop? inet:ipv6-address
	| +--rw recipient-routing-tables		| +--rw recipient-routing-tables
	| +--rw recipient-routing-table [name]		| +--rw recipient-routing-table* [name]
	| +--rw name routing-table-ref		| +--rw name routing-table-ref
	| +--rw filter? route-filter-ref		| +--rw filter? route-filter-ref
	+--rw route-filters		+--rw route-filters
	+--rw route-filter [name]		+--rw route-filter* [name]
	+--rw name string		+--rw name string
	+--rw description? string		+--rw description? string
	+--rw type identityref		+--rw type identityref
			A.2. Operational State Data
			+--ro routing-state
			+--ro router* [name]
			| +--ro name string
			| +--ro type? identityref
			| +--ro router-id? yang:dotted-quad
			| +--ro default-routing-tables
			| | +--ro default-routing-table* [address-family safi]
			| | +--ro address-family ianaaf:address-family
			| | +--ro safi ianaaf:subsequent-address-family
			| | +--ro name routing-table-state-ref
			| +--ro interfaces
			| | +--ro interface* [name]
			| | +--ro name if:interface-state-ref
			| | +--ro v6ur:ipv6-router-advertisements
			| | +--ro v6ur:send-advertisements? boolean
			| | +--ro v6ur:max-rtr-adv-interval? uint16
			| | +--ro v6ur:min-rtr-adv-interval? uint16
			| | +--ro v6ur:managed-flag? boolean
			| | +--ro v6ur:other-config-flag? boolean
			| | +--ro v6ur:link-mtu? uint32
			| | +--ro v6ur:reachable-time? uint32
			| | +--ro v6ur:retrans-timer? uint32
			| | +--ro v6ur:cur-hop-limit? uint8
			| | +--ro v6ur:default-lifetime? uint16
			| | +--ro v6ur:prefix-list
			| | +--ro v6ur:prefix* [prefix-spec]
			| | +--ro v6ur:prefix-spec inet:ipv6-prefix
			| | +--ro v6ur:valid-lifetime? uint32
			| | +--ro v6ur:on-link-flag? boolean
			| | +--ro v6ur:preferred-lifetime? uint32
			| | +--ro v6ur:autonomous-flag? boolean
			| +--ro routing-protocols
			| +--ro routing-protocol* [name]
			| +--ro name string
			| +--ro type identityref
			| +--ro connected-routing-tables
			| +--ro connected-routing-table* [name]
			| +--ro name routing-table-state-ref
			| +--ro import-filter? route-filter-state-ref
			| +--ro export-filter? route-filter-state-ref
			+--ro routing-tables
			| +--ro routing-table* [name]
			| +--ro name string
			| +--ro address-family ianaaf:address-family
			| +--ro safi ianaaf:subsequent-address-family
			| +--ro routes
			| | +--ro route*
			| | +--ro outgoing-interface? if:interface-state-ref
			| | +--ro source-protocol identityref
			| | +--ro last-updated? yang:date-and-time
			| | +--ro v4ur:dest-prefix? inet:ipv4-prefix
			| | +--ro v4ur:next-hop? inet:ipv4-address
			| | +--ro v6ur:dest-prefix? inet:ipv6-prefix
			| | +--ro v6ur:next-hop? inet:ipv6-address
			| +--ro recipient-routing-tables
			| +--ro recipient-routing-table* [name]
			| +--ro name routing-table-state-ref
			| +--ro filter? route-filter-state-ref
			+--ro route-filters
			+--ro route-filter* [name]
			+--ro name string
			+--ro type identityref
	Appendix B. Example: Adding a New Routing Protocol		Appendix B. Example: Adding a New Routing Protocol
	This appendix demonstrates how the core routing data model can be		This appendix demonstrates how the core routing data model can be
	extended to support a new routing protocol. The YANG module		extended to support a new routing protocol. The YANG module
	"example-rip" shown below is intended only as an illustration rather		"example-rip" shown below is intended only as an illustration rather
	than a real definition of a data model for the RIP routing protocol.		than a real definition of a data model for the RIP routing protocol.
	For the sake of brevity, we do not follow all the guidelines		For the sake of brevity, we do not follow all the guidelines
	specified in [RFC6087]. See also Section 4.4.2.		specified in [RFC6087]. See also Section 4.4.2.
	module example-rip {		module example-rip {
	skipping to change at page 57, line 51		skipping to change at page 68, line 51
	}		}
	leaf tag {		leaf tag {
	type uint16;		type uint16;
	default "0";		default "0";
	description		description
	"This leaf may be used to carry additional info, e.g. AS		"This leaf may be used to carry additional info, e.g. AS
	number.";		number.";
	}		}
	}		}
	augment "/rt:routing/rt:routing-tables/rt:routing-table/rt:routes/"		augment "/rt:routing-state/rt:routing-tables/rt:routing-table/"
	+ "rt:route" {		+ "rt:routes/rt:route" {
			when "rt:source-protocol = 'rip:rip'" {
			description
			"This augment is only valid for a routes whose source
			protocol is RIP.";
			}
	description		description
	"RIP-specific route attributes.";		"RIP-specific route attributes.";
	uses route-content;		uses route-content;
	}		}
	augment "/rt:active-route/rt:output/rt:route" {		augment "/rt:active-route/rt:output/rt:route" {
	description		description
	"RIP-specific route attributes in the output of 'active-route'		"RIP-specific route attributes in the output of 'active-route'
	RPC.";		RPC.";
	uses route-content;		uses route-content;
	}		}
	augment "/rt:routing/rt:router/rt:routing-protocols/"		augment "/rt:routing/rt:router/rt:routing-protocols/"
	+ "rt:routing-protocol" {		+ "rt:routing-protocol" {
	when "rt:type = 'rip:rip'" {		when "rt:type = 'rip:rip'" {
	description		description
	'This augment is only valid for a routing protocol instance		"This augment is only valid for a routing protocol instance
	of type "rip".';		of type 'rip'.";
	}		}
	container rip {		container rip {
	description		description
	"RIP instance configuration.";		"RIP instance configuration.";
	container interfaces {		container interfaces {
	description		description
	"Per-interface RIP configuration.";		"Per-interface RIP configuration.";
	list interface {		list interface {
	key "name";		key "name";
	description		description
	skipping to change at page 60, line 21		skipping to change at page 71, line 21
	o ietf-interfaces [YANG-IF],		o ietf-interfaces [YANG-IF],
	o ietf-ip [YANG-IP],		o ietf-ip [YANG-IP],
	o ietf-routing (Section 6),		o ietf-routing (Section 6),
	o ietf-ipv4-unicast-routing (Section 7),		o ietf-ipv4-unicast-routing (Section 7),
	o ietf-ipv6-unicast-routing (Section 8).		o ietf-ipv6-unicast-routing (Section 8).
	We assume a simple network setup as shown in Figure 4: router "A"		We assume a simple network setup as shown in Figure 5: router "A"
	uses static default routes with the "ISP" router as the next hop.		uses static default routes with the "ISP" router as the next hop.
	IPv6 router advertisements are configured only on the "eth1"		IPv6 router advertisements are configured only on the "eth1"
	interface and disabled on the upstream "eth0" interface.		interface and disabled on the upstream "eth0" interface.
	+-----------------+		+-----------------+
	| |		| |
	| Router ISP |		| Router ISP |
	| |		| |
	+--------+--------+		+--------+--------+
	|2001:db8:0:1::2		|2001:db8:0:1::2
	skipping to change at page 60, line 46		skipping to change at page 71, line 46
	eth0|192.0.2.1		eth0|192.0.2.1
	+--------+--------+		+--------+--------+
	| |		| |
	| Router A |		| Router A |
	| |		| |
	+--------+--------+		+--------+--------+
	eth1|198.51.100.1		eth1|198.51.100.1
	|2001:db8:0:2::1		|2001:db8:0:2::1
	|		|
	Figure 4: Example network configuration		Figure 5: Example network configuration
	A reply to the NETCONF <get> message sent by router "A" would then be		A reply to the NETCONF <get> message sent by router "A" would then be
	as follows:		as follows:
	<?xml version="1.0"?>		<?xml version="1.0"?>
	<rpc-reply		<rpc-reply
	message-id="101"		message-id="101"
	xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"		xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"
	xmlns:v4ur="urn:ietf:params:xml:ns:yang:ietf-ipv4-unicast-routing"		xmlns:v4ur="urn:ietf:params:xml:ns:yang:ietf-ipv4-unicast-routing"
	xmlns:v6ur="urn:ietf:params:xml:ns:yang:ietf-ipv6-unicast-routing"		xmlns:v6ur="urn:ietf:params:xml:ns:yang:ietf-ipv6-unicast-routing"
	xmlns:if="urn:ietf:params:xml:ns:yang:ietf-interfaces"		xmlns:if="urn:ietf:params:xml:ns:yang:ietf-interfaces"
	xmlns:ip="urn:ietf:params:xml:ns:yang:ietf-ip"		xmlns:ip="urn:ietf:params:xml:ns:yang:ietf-ip"
	xmlns:rt="urn:ietf:params:xml:ns:yang:ietf-routing">		xmlns:rt="urn:ietf:params:xml:ns:yang:ietf-routing">
	<data>		<data>
	<if:interfaces>		<if:interfaces>
	<if:interface>		<if:interface>
	<if:name>eth0</if:name>		<if:name>eth0</if:name>
	<if:type>ethernetCsmacd</if:type>		<if:type>ethernetCsmacd</if:type>
	<if:location>eth0</if:location>		<if:description>
	<ip:ipv4>		Uplink to ISP.
	<ip:address>		</if:description>
	<ip:ip>192.0.2.1</ip:ip>		<ip:ipv4>
	<ip:prefix-length>24</ip:prefix-length>		<ip:address>
	</ip:address>		<ip:ip>192.0.2.1</ip:ip>
	<ip:forwarding>true</ip:forwarding>		<ip:prefix-length>24</ip:prefix-length>
	</ip:ipv4>		</ip:address>
	<ip:ipv6>		<ip:forwarding>true</ip:forwarding>
	<ip:address>		</ip:ipv4>
	<ip:ip>2001:0db8:0:1::1</ip:ip>		<ip:ipv6>
	<ip:prefix-length>64</ip:prefix-length>		<ip:address>
	</ip:address>		<ip:ip>2001:0db8:0:1::1</ip:ip>
	<ip:forwarding>true</ip:forwarding>		<ip:prefix-length>64</ip:prefix-length>
	<ip:autoconf>		</ip:address>
	<ip:create-global-addresses>false</ip:create-global-addresses>		<ip:forwarding>true</ip:forwarding>
	</ip:autoconf>		<ip:autoconf>
	</ip:ipv6>		<ip:create-global-addresses>false</ip:create-global-addresses>
	</if:interface>		</ip:autoconf>
	<if:interface>		</ip:ipv6>
	<if:name>eth1</if:name>		</if:interface>
	<if:type>ethernetCsmacd</if:type>		<if:interface>
	<if:location>eth1</if:location>		<if:name>eth1</if:name>
	<ip:ipv4>		<if:type>ethernetCsmacd</if:type>
	<ip:address>		<if:description>
	<ip:ip>198.51.100.1</ip:ip>		Interface to the internal network.
	<ip:prefix-length>24</ip:prefix-length>		</if:description>
	</ip:address>		<ip:ipv4>
	<ip:forwarding>true</ip:forwarding>		<ip:address>
	</ip:ipv4>		<ip:ip>198.51.100.1</ip:ip>
	<ip:ipv6>		<ip:prefix-length>24</ip:prefix-length>
	<ip:address>		</ip:address>
	<ip:ip>2001:0db8:0:2::1</ip:ip>		<ip:forwarding>true</ip:forwarding>
	<ip:prefix-length>64</ip:prefix-length>		</ip:ipv4>
	</ip:address>		<ip:ipv6>
	<ip:forwarding>true</ip:forwarding>		<ip:address>
	<ip:autoconf>		<ip:ip>2001:0db8:0:2::1</ip:ip>
	<ip:create-global-addresses>false</ip:create-global-addresses>		<ip:prefix-length>64</ip:prefix-length>
	</ip:autoconf>		</ip:address>
	</ip:ipv6>		<ip:forwarding>true</ip:forwarding>
	</if:interface>		<ip:autoconf>
	</if:interfaces>		<ip:create-global-addresses>false</ip:create-global-addresses>
	<rt:routing>		</ip:autoconf>
	<rt:router>		</ip:ipv6>
	<rt:name>rtr0</rt:name>		</if:interface>
	<rt:router-id>192.0.2.1</rt:router-id>		</if:interfaces>
	<rt:description>Router A</rt:description>		<if:interfaces-state>
	<rt:main-routing-tables>		<if:interface>
	<rt:main-routing-table>		<if:name>eth0</if:name>
			<if:type>ethernetCsmacd</if:type>
			<if:phys-address>00:0C:42:E5:B1:E9</if:phys-address>
			<if:oper-status>up</if:oper-status>
			<if:statistics>
			<if:discontinuity-time>
			2013-07-02T17:11:27+00:58
			</if:discontinuity-time>
			</if:statistics>
			</if:interface>
			<if:interface>
			<if:name>eth1</if:name>
			<if:type>ethernetCsmacd</if:type>
			<if:oper-status>up</if:oper-status>
			<if:phys-address>00:0C:42:E5:B1:EA</if:phys-address>
			<if:statistics>
			<if:discontinuity-time>
			2013-07-02T17:11:27+00:59
			</if:discontinuity-time>
			</if:statistics>
			</if:interface>
			</if:interfaces-state>
			<rt:routing>
			<rt:router>
			<rt:name>rtr0</rt:name>
			<rt:description>Router A</rt:description>
			<rt:interfaces>
			<rt:interface>
			<rt:name>eth1</rt:name>
			<v6ur:ipv6-router-advertisements>
			<v6ur:send-advertisements>true</v6ur:send-advertisements>
			<v6ur:prefix-list>
			<v6ur:prefix>
			<v6ur:prefix-spec>2001:db8:0:2::/64</v6ur:prefix-spec>
			</v6ur:prefix>
			</v6ur:prefix-list>
			</v6ur:ipv6-router-advertisements>
			</rt:interface>
			</rt:interfaces>
			<rt:routing-protocols>
			<rt:routing-protocol>
			<rt:name>st0</rt:name>
			<rt:description>
			Static routing is used for the internal network.
			</rt:description>
			<rt:type>rt:static</rt:type>
			<rt:static-routes>
			<v4ur:ipv4>
			<v4ur:route>
			<v4ur:id>1</v4ur:id>
			<v4ur:dest-prefix>0.0.0.0/0</v4ur:dest-prefix>
			<v4ur:next-hop>192.0.2.2</v4ur:next-hop>
			</v4ur:route>
			</v4ur:ipv4>
			<v6ur:ipv6>
			<v6ur:route>
			<v6ur:id>1</v6ur:id>
			<v6ur:dest-prefix>::/0</v6ur:dest-prefix>
			<v6ur:next-hop>2001:db8:0:1::2</v6ur:next-hop>
			</v6ur:route>
			</v6ur:ipv6>
			</rt:static-routes>
			</rt:routing-protocol>
			</rt:routing-protocols>
			</rt:router>
			</rt:routing>
			<rt:routing-state>
			<rt:router>
			<rt:name>rtr0</rt:name>
			<rt:router-id>192.0.2.1</rt:router-id>
			<rt:default-routing-tables>
			<rt:default-routing-table>
			<rt:address-family>ipv4</rt:address-family>
			<rt:safi>nlri-unicast</rt:safi>
			<rt:name>ipv4-unicast</rt:name>
			</rt:default-routing-table>
			<rt:default-routing-table>
			<rt:address-family>ipv6</rt:address-family>
			<rt:safi>nlri-unicast</rt:safi>
			<rt:name>ipv6-unicast</rt:name>
			</rt:default-routing-table>
			</rt:default-routing-tables>
			<rt:interfaces>
			<rt:interface>
			<rt:name>eth0</rt:name>
			</rt:interface>
			<rt:interface>
			<rt:name>eth1</rt:name>
			<v6ur:ipv6-router-advertisements>
			<v6ur:send-advertisements>true</v6ur:send-advertisements>
			<v6ur:prefix-list>
			<v6ur:prefix>
			<v6ur:prefix-spec>2001:db8:0:2::/64</v6ur:prefix-spec>
			</v6ur:prefix>
			</v6ur:prefix-list>
			</v6ur:ipv6-router-advertisements>
			</rt:interface>
			</rt:interfaces>
			<rt:routing-protocols>
			<rt:routing-protocol>
			<rt:name>st0</rt:name>
			<rt:type>rt:static</rt:type>
			</rt:routing-protocol>
			</rt:routing-protocols>
			</rt:router>
			<rt:routing-tables>
			<rt:routing-table>
			<rt:name>ipv4-unicast</rt:name>
	<rt:address-family>ipv4</rt:address-family>		<rt:address-family>ipv4</rt:address-family>
	<rt:safi>nlri-unicast</rt:safi>		<rt:safi>nlri-unicast</rt:safi>
	<rt:name>ipv4-unicast</rt:name>		<rt:routes>
	</rt:main-routing-table>		<rt:route>
	<rt:main-routing-table>		<v4ur:dest-prefix>192.0.2.1/24</v4ur:dest-prefix>
			<rt:outgoing-interface>eth0</rt:outgoing-interface>
			<rt:source-protocol>rt:direct</rt:source-protocol>
			<rt:last-updated>2013-07-02T17:11:27+01:00</rt:last-updated>
			</rt:route>
			<rt:route>
			<v4ur:dest-prefix>198.51.100.0/24</v4ur:dest-prefix>
			<rt:outgoing-interface>eth1</rt:outgoing-interface>
			<rt:source-protocol>rt:direct</rt:source-protocol>
			<rt:last-updated>2013-07-02T17:11:27+01:00</rt:last-updated>
			</rt:route>
			<rt:route>
			<v4ur:dest-prefix>0.0.0.0/0</v4ur:dest-prefix>
			<rt:source-protocol>rt:static</rt:source-protocol>
			<v4ur:next-hop>192.0.2.2</v4ur:next-hop>
			<rt:last-updated>2013-07-02T18:02:45+01:00</rt:last-updated>
			</rt:route>
			</rt:routes>
			</rt:routing-table>
			<rt:routing-table>
			<rt:name>ipv6-unicast</rt:name>
	<rt:address-family>ipv6</rt:address-family>		<rt:address-family>ipv6</rt:address-family>
	<rt:safi>nlri-unicast</rt:safi>		<rt:safi>nlri-unicast</rt:safi>
	<rt:name>ipv6-unicast</rt:name>		<rt:routes>
	</rt:main-routing-table>		<rt:route>
	</rt:main-routing-tables>		<v6ur:dest-prefix>2001:db8:0:1::/64</v6ur:dest-prefix>
	<rt:interfaces>		<rt:outgoing-interface>eth0</rt:outgoing-interface>
	<rt:interface>		<rt:source-protocol>rt:direct</rt:source-protocol>
	<rt:name>eth0</rt:name>		<rt:last-updated>2013-07-02T17:11:27+01:00</rt:last-updated>
	</rt:interface>		</rt:route>
	<rt:interface>		<rt:route>
	<rt:name>eth1</rt:name>		<v6ur:dest-prefix>2001:db8:0:2::/64</v6ur:dest-prefix>
	<v6ur:ipv6-router-advertisements>		<rt:outgoing-interface>eth1</rt:outgoing-interface>
	<v6ur:send-advertisements>true</v6ur:send-advertisements>		<rt:source-protocol>rt:direct</rt:source-protocol>
	<v6ur:prefix-list>		<rt:last-updated>2013-07-02T17:11:27+01:00</rt:last-updated>
	<v6ur:prefix>		</rt:route>
	<v6ur:prefix-spec>2001:db8:0:2::/64</v6ur:prefix-spec>		<rt:route>
	</v6ur:prefix>		<v6ur:dest-prefix>::/0</v6ur:dest-prefix>
	</v6ur:prefix-list>		<v6ur:next-hop>2001:db8:0:1::2</v6ur:next-hop>
	</v6ur:ipv6-router-advertisements>		<rt:source-protocol>rt:static</rt:source-protocol>
	</rt:interface>		<rt:last-updated>2013-07-02T18:02:45+01:00</rt:last-updated>
	</rt:interfaces>		</rt:route>
	<rt:routing-protocols>		</rt:routes>
	<rt:routing-protocol>		</rt:routing-table>
	<rt:name>st0</rt:name>		</rt:routing-tables>
	<rt:description>		</rt:routing-state>
	Static routing is used for the internal network.		</data>
	</rt:description>		</rpc-reply>
	<rt:type>rt:static</rt:type>
	<rt:static-routes>
	<v4ur:ipv4>
	<v4ur:route>
	<v4ur:id>1</v4ur:id>
	<v4ur:dest-prefix>0.0.0.0/0</v4ur:dest-prefix>
	<v4ur:next-hop>192.0.2.2</v4ur:next-hop>
	</v4ur:route>
	</v4ur:ipv4>
	<v6ur:ipv6>
	<v6ur:route>
	<v6ur:id>1</v6ur:id>
	<v6ur:dest-prefix>::/0</v6ur:dest-prefix>
	<v6ur:next-hop>2001:db8:0:1::2</v6ur:next-hop>
	</v6ur:route>
	</v6ur:ipv6>
	</rt:static-routes>
	</rt:routing-protocol>
	</rt:routing-protocols>
	</rt:router>
	<rt:routing-tables>
	<rt:routing-table>
	<rt:name>ipv4-unicast</rt:name>
	<rt:address-family>ipv4</rt:address-family>
	<rt:safi>nlri-unicast</rt:safi>
	<rt:routes>
	<rt:route>
	<v4ur:dest-prefix>192.0.2.1/24</v4ur:dest-prefix>
	<rt:outgoing-interface>eth0</rt:outgoing-interface>
	<rt:source-protocol>direct</rt:source-protocol>
	<rt:last-updated>2012-10-02T17:11:27+01:00</rt:last-updated>
	</rt:route>
	<rt:route>
	<v4ur:dest-prefix>198.51.100.0/24</v4ur:dest-prefix>
	<rt:outgoing-interface>eth1</rt:outgoing-interface>
	<rt:source-protocol>direct</rt:source-protocol>
	<rt:last-updated>2012-10-02T17:11:27+01:00</rt:last-updated>
	</rt:route>
	<rt:route>
	<v4ur:dest-prefix>0.0.0.0/0</v4ur:dest-prefix>
	<rt:source-protocol>st0</rt:source-protocol>
	<v4ur:next-hop>192.0.2.2</v4ur:next-hop>
	<rt:last-updated>2012-10-02T18:02:45+01:00</rt:last-updated>
	</rt:route>
	</rt:routes>
	</rt:routing-table>
	<rt:routing-table>
	<rt:name>ipv6-unicast</rt:name>
	<rt:address-family>ipv6</rt:address-family>
	<rt:safi>nlri-unicast</rt:safi>
	<rt:routes>
	<rt:route>
	<v6ur:dest-prefix>2001:db8:0:1::/64</v6ur:dest-prefix>
	<rt:outgoing-interface>eth0</rt:outgoing-interface>
	<rt:source-protocol>direct</rt:source-protocol>
	<rt:last-updated>2012-10-02T17:11:27+01:00</rt:last-updated>
	</rt:route>
	<rt:route>
	<v6ur:dest-prefix>2001:db8:0:2::/64</v6ur:dest-prefix>
	<rt:outgoing-interface>eth1</rt:outgoing-interface>
	<rt:source-protocol>direct</rt:source-protocol>
	<rt:last-updated>2012-10-02T17:11:27+01:00</rt:last-updated>
	</rt:route>
	<rt:route>
	<v6ur:dest-prefix>::/0</v6ur:dest-prefix>
	<v6ur:next-hop>2001:db8:0:1::2</v6ur:next-hop>
	<rt:source-protocol>st0</rt:source-protocol>
	<rt:last-updated>2012-10-02T18:02:45+01:00</rt:last-updated>
	</rt:route>
	</rt:routes>
	</rt:routing-table>
	</rt:routing-tables>
	</rt:routing>
	</data>
	</rpc-reply>
	Appendix D. Change Log		Appendix D. Change Log
	RFC Editor: remove this section upon publication as an RFC.		RFC Editor: remove this section upon publication as an RFC.
	D.1. Changes Between Versions -08 and -09		D.1. Changes Between Versions -09 and -10
			o Added subtree for operational state data ("/routing-state").
			o Terms "system-controlled entry" and "user-controlled entry"
			defined and used.
			o New feature "user-defined-routing-tables". Nodes that are useful
			only with user-defined routing tables are now conditional.
			o Added grouping "router-id".
			o In routing tables, "source-protocol" attribute of routes now
			reports only protocol type, and its datatype is "identityref".
			o Renamed "main-routing-table" to "default-routing-table".
			D.2. Changes Between Versions -08 and -09
	o Fixed "must" expresion for "connected-routing-table".		o Fixed "must" expresion for "connected-routing-table".
	o Simplified "must" expression for "main-routing-table".		o Simplified "must" expression for "main-routing-table".
	o Moved per-interface configuration of a new routing protocol under		o Moved per-interface configuration of a new routing protocol under
	'routing-protocol'. This also affects the 'example-rip' module.		'routing-protocol'. This also affects the 'example-rip' module.
	D.2. Changes Between Versions -07 and -08		D.3. Changes Between Versions -07 and -08
	o Changed reference from RFC6021 to RFC6021bis.		o Changed reference from RFC6021 to RFC6021bis.
	D.3. Changes Between Versions -06 and -07		D.4. Changes Between Versions -06 and -07
	o The contents of <get-reply> in Appendix C was updated: "eth[01]"		o The contents of <get-reply> in Appendix C was updated: "eth[01]"
	is used as the value of "location", and "forwarding" is on for		is used as the value of "location", and "forwarding" is on for
	both interfaces and both IPv4 and IPv6.		both interfaces and both IPv4 and IPv6.
	o The "must" expression for "main-routing-table" was modified to		o The "must" expression for "main-routing-table" was modified to
	avoid redundant error messages reporting address family mismatch		avoid redundant error messages reporting address family mismatch
	when "name" points to a non-existent routing table.		when "name" points to a non-existent routing table.
	o The default behavior for IPv6 RA prefix advertisements was		o The default behavior for IPv6 RA prefix advertisements was
	clarified.		clarified.
	o Changed type of "rt:router-id" to "ip:dotted-quad".		o Changed type of "rt:router-id" to "ip:dotted-quad".
	o Type of "rt:router-id" changed to "yang:dotted-quad".		o Type of "rt:router-id" changed to "yang:dotted-quad".
	o Fixed missing prefixes in XPath expressions.		o Fixed missing prefixes in XPath expressions.
	D.4. Changes Between Versions -05 and -06		D.5. Changes Between Versions -05 and -06
	o Document title changed: "Configuration" was replaced by		o Document title changed: "Configuration" was replaced by
	"Management".		"Management".
	o New typedefs "routing-table-ref" and "route-filter-ref".		o New typedefs "routing-table-ref" and "route-filter-ref".
	o Double slashes "//" were removed from XPath expressions and		o Double slashes "//" were removed from XPath expressions and
	replaced with the single "/".		replaced with the single "/".
	o Removed uniqueness requirement for "router-id".		o Removed uniqueness requirement for "router-id".
	skipping to change at page 66, line 15		skipping to change at page 78, line 33
	o Complete data tree is now in Appendix A.		o Complete data tree is now in Appendix A.
	o Changed type of "source-protocol" from "leafref" to "string".		o Changed type of "source-protocol" from "leafref" to "string".
	o Clarified the relationship between routing protocol instances and		o Clarified the relationship between routing protocol instances and
	connected routing tables.		connected routing tables.
	o Added a must constraint saying that a routing table connected to		o Added a must constraint saying that a routing table connected to
	the direct pseudo-protocol must not be a main routing table.		the direct pseudo-protocol must not be a main routing table.
	D.5. Changes Between Versions -04 and -05		D.6. Changes Between Versions -04 and -05
	o Routing tables are now global, i.e., "routing-tables" is a child		o Routing tables are now global, i.e., "routing-tables" is a child
	of "routing" rather than "router".		of "routing" rather than "router".
	o "must" statement for "static-routes" changed to "when".		o "must" statement for "static-routes" changed to "when".
	o Added "main-routing-tables" containing references to main routing		o Added "main-routing-tables" containing references to main routing
	tables for each address family.		tables for each address family.
	o Removed the defaults for "address-family" and "safi" and made them		o Removed the defaults for "address-family" and "safi" and made them
	skipping to change at page 67, line 5		skipping to change at page 79, line 21
	o The "direct" pseudo-protocol is always connected to main routing		o The "direct" pseudo-protocol is always connected to main routing
	tables.		tables.
	o Entries in the list of connected routing tables renamed from		o Entries in the list of connected routing tables renamed from
	"routing-table" to "connected-routing-table".		"routing-table" to "connected-routing-table".
	o Added "must" constraint saying that a routing table must not be		o Added "must" constraint saying that a routing table must not be
	its own recipient.		its own recipient.
	D.6. Changes Between Versions -03 and -04		D.7. Changes Between Versions -03 and -04
	o Changed "error-tag" for both RPC methods from "missing element" to		o Changed "error-tag" for both RPC methods from "missing element" to
	"data-missing".		"data-missing".
	o Removed the decrementing behavior for advertised IPv6 prefix		o Removed the decrementing behavior for advertised IPv6 prefix
	parameters "valid-lifetime" and "preferred-lifetime".		parameters "valid-lifetime" and "preferred-lifetime".
	o Changed the key of the static route lists from "seqno" to "id"		o Changed the key of the static route lists from "seqno" to "id"
	because the routes needn't be sorted.		because the routes needn't be sorted.
	o Added 'must' constraint saying that "preferred-lifetime" must not		o Added 'must' constraint saying that "preferred-lifetime" must not
	be greater than "valid-lifetime".		be greater than "valid-lifetime".
	D.7. Changes Between Versions -02 and -03		D.8. Changes Between Versions -02 and -03
	o Module "iana-afn-safi" moved to I-D "iana-if-type".		o Module "iana-afn-safi" moved to I-D "iana-if-type".
	o Removed forwarding table.		o Removed forwarding table.
	o RPC "get-route" changed to "active-route". Its output is a list		o RPC "get-route" changed to "active-route". Its output is a list
	of routes (for multi-path routing).		of routes (for multi-path routing).
	o New RPC "route-count".		o New RPC "route-count".
	skipping to change at page 68, line 5		skipping to change at page 80, line 20
	"ietf-ip".		"ietf-ip".
	o Added "router-id" leaf.		o Added "router-id" leaf.
	o Specified the names for IPv4/IPv6 unicast main routing tables.		o Specified the names for IPv4/IPv6 unicast main routing tables.
	o Route parameter "last-modified" changed to "age".		o Route parameter "last-modified" changed to "age".
	o Added container "recipient-routing-tables".		o Added container "recipient-routing-tables".
	D.8. Changes Between Versions -01 and -02		D.9. Changes Between Versions -01 and -02
	o Added module "ietf-ipv6-unicast-routing".		o Added module "ietf-ipv6-unicast-routing".
	o The example in Appendix C now uses IP addresses from blocks		o The example in Appendix C now uses IP addresses from blocks
	reserved for documentation.		reserved for documentation.
	o Direct routes appear by default in the forwarding table.		o Direct routes appear by default in the forwarding table.
	o Network layer interfaces must be assigned to a router instance.		o Network layer interfaces must be assigned to a router instance.
	Additional interface configuration may be present.		Additional interface configuration may be present.
	skipping to change at page 68, line 29		skipping to change at page 80, line 44
	o Additional "must" statements were added.		o Additional "must" statements were added.
	o The "route-content" grouping for IPv4 and IPv6 unicast now		o The "route-content" grouping for IPv4 and IPv6 unicast now
	includes the material from the "ietf-routing" version via "uses		includes the material from the "ietf-routing" version via "uses
	rt:route-content".		rt:route-content".
	o Explanation of symbols in the tree representation of data model		o Explanation of symbols in the tree representation of data model
	hierarchy.		hierarchy.
	D.9. Changes Between Versions -00 and -01		D.10. Changes Between Versions -00 and -01
	o AFN/SAFI-independent stuff was moved to the "ietf-routing" module.		o AFN/SAFI-independent stuff was moved to the "ietf-routing" module.
	o Typedefs for AFN and SAFI were placed in a separate "iana-afn-		o Typedefs for AFN and SAFI were placed in a separate "iana-afn-
	safi" module.		safi" module.
	o Names of some data nodes were changed, in particular "routing-		o Names of some data nodes were changed, in particular "routing-
	process" is now "router".		process" is now "router".
	o The restriction of a single AFN/SAFI per router was lifted.		o The restriction of a single AFN/SAFI per router was lifted.
End of changes. 182 change blocks.
	587 lines changed or deleted		1222 lines changed or added
This html diff was produced by rfcdiff 1.41. The latest version is available from http://tools.ietf.org/tools/rfcdiff/