draft-ietf-manet-nhdp-mib-05.txt		draft-ietf-manet-nhdp-mib-06.txt
	Internet Engineering Task Force U. Herberg		Internet Engineering Task Force U. Herberg
	Internet-Draft LIX, Ecole Polytechnique		Internet-Draft LIX, Ecole Polytechnique
	Intended status: Standards Track R. Cole		Intended status: Standards Track R. Cole
	Expires: May 13, 2011 US Army CERDEC		Expires: May 15, 2011 US Army CERDEC
	I. Chakeres		I. Chakeres
	CenGen		CenGen
	November 9, 2010		November 11, 2010
	Definition of Managed Objects for the Neighborhood Discovery Protocol		Definition of Managed Objects for the Neighborhood Discovery Protocol
	draft-ietf-manet-nhdp-mib-05		draft-ietf-manet-nhdp-mib-06
	Abstract		Abstract
	This memo defines a portion of the Management Information Base (MIB)		This memo defines a portion of the Management Information Base (MIB)
	for use with network management protocols in the Internet community.		for use with network management protocols in the Internet community.
	In particular, it describes objects for configuring aspects of the		In particular, it describes objects for configuring parameters of the
	Neighborhood Discovery Protocol (NHDP) process on a router. The NHDP		Neighborhood Discovery Protocol (NHDP) process on a router. The MIB
	MIB also reports state and performance information and notifications.		defined in this memo, denoted NHDP-MIB, also reports state,
	This additional state and performance information is useful to		performance information and notifications. This additional state and
	management stations troubleshooting neighbor discovery problems.		performance information is useful to troubleshoot problems and
			performance issues during neighbor discovery.
	Status of This Memo		Status of This Memo
	This Internet-Draft is submitted in full conformance with the		This Internet-Draft is submitted in full conformance with the
	provisions of BCP 78 and BCP 79.		provisions of BCP 78 and BCP 79.
	Internet-Drafts are working documents of the Internet Engineering		Internet-Drafts are working documents of the Internet Engineering
	Task Force (IETF). Note that other groups may also distribute		Task Force (IETF). Note that other groups may also distribute
	working documents as Internet-Drafts. The list of current Internet-		working documents as Internet-Drafts. The list of current Internet-
	Drafts is at http://datatracker.ietf.org/drafts/current/.		Drafts is at http://datatracker.ietf.org/drafts/current/.
	Internet-Drafts are draft documents valid for a maximum of six months		Internet-Drafts are draft documents valid for a maximum of six months
	and may be updated, replaced, or obsoleted by other documents at any		and may be updated, replaced, or obsoleted by other documents at any
	time. It is inappropriate to use Internet-Drafts as reference		time. It is inappropriate to use Internet-Drafts as reference
	material or to cite them other than as "work in progress."		material or to cite them other than as "work in progress."
	This Internet-Draft will expire on May 13, 2011.		This Internet-Draft will expire on May 15, 2011.
	Copyright Notice		Copyright Notice
	Copyright (c) 2010 IETF Trust and the persons identified as the		Copyright (c) 2010 IETF Trust and the persons identified as the
	document authors. All rights reserved.		document authors. All rights reserved.
	This document is subject to BCP 78 and the IETF Trust's Legal		This document is subject to BCP 78 and the IETF Trust's Legal
	Provisions Relating to IETF Documents		Provisions Relating to IETF Documents
	(http://trustee.ietf.org/license-info) in effect on the date of		(http://trustee.ietf.org/license-info) in effect on the date of
	publication of this document. Please review these documents		publication of this document. Please review these documents
	skipping to change at page 2, line 19		skipping to change at page 2, line 20
	Table of Contents		Table of Contents
	1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3		1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3
	2. The Internet-Standard Management Framework . . . . . . . . . . 3		2. The Internet-Standard Management Framework . . . . . . . . . . 3
	3. Conventions . . . . . . . . . . . . . . . . . . . . . . . . . 3		3. Conventions . . . . . . . . . . . . . . . . . . . . . . . . . 3
	4. Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 3		4. Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
	4.1. Terms . . . . . . . . . . . . . . . . . . . . . . . . . . 3		4.1. Terms . . . . . . . . . . . . . . . . . . . . . . . . . . 3
	5. Structure of the MIB Module . . . . . . . . . . . . . . . . . 4		5. Structure of the MIB Module . . . . . . . . . . . . . . . . . 4
	5.1. Notifications . . . . . . . . . . . . . . . . . . . . . . 4		5.1. Notifications . . . . . . . . . . . . . . . . . . . . . . 4
			5.1.1. Introduction . . . . . . . . . . . . . . . . . . . . . 4
			5.1.2. Notification Generation . . . . . . . . . . . . . . . 5
			5.1.3. Limiting Frequency of Notifications . . . . . . . . . 5
	5.2. The Configuration Group . . . . . . . . . . . . . . . . . 5		5.2. The Configuration Group . . . . . . . . . . . . . . . . . 5
	5.3. The State Group . . . . . . . . . . . . . . . . . . . . . 5		5.3. The State Group . . . . . . . . . . . . . . . . . . . . . 6
	5.4. The Performance Group . . . . . . . . . . . . . . . . . . 5		5.4. The Performance Group . . . . . . . . . . . . . . . . . . 6
	5.5. Relationship to Other MIB Modules . . . . . . . . . . . . 14		6. Relationship to Other MIB Modules . . . . . . . . . . . . . . 15
	5.5.1. Relationship to the SNMPv2-MIB . . . . . . . . . . . . 15		6.1. Relationship to the SNMPv2-MIB . . . . . . . . . . . . . . 15
	5.5.2. Relationship to the OLSRv2-MIB . . . . . . . . . . . . 15		6.2. Relationship to Routing Protocol MIBs relying on the
	5.5.3. Relationship to the REPORT-MIB . . . . . . . . . . . . 15		NHDP-MIB . . . . . . . . . . . . . . . . . . . . . . . . . 16
	5.5.4. MIB modules required for IMPORTS . . . . . . . . . . . 15		6.3. Relationship to the REPORT-MIB . . . . . . . . . . . . . . 16
	5.6. Definitions . . . . . . . . . . . . . . . . . . . . . . . 15		6.4. MIB modules required for IMPORTS . . . . . . . . . . . . . 16
	5.7. Security Considerations . . . . . . . . . . . . . . . . . 56		7. Definitions . . . . . . . . . . . . . . . . . . . . . . . . . 16
	5.8. IANA Considerations . . . . . . . . . . . . . . . . . . . 58		8. Security Considerations . . . . . . . . . . . . . . . . . . . 56
	5.9. Contributors . . . . . . . . . . . . . . . . . . . . . . . 58		9. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 58
	6. References . . . . . . . . . . . . . . . . . . . . . . . . . . 59		10. Contributors . . . . . . . . . . . . . . . . . . . . . . . . . 58
	6.1. Normative References . . . . . . . . . . . . . . . . . . . 59		11. References . . . . . . . . . . . . . . . . . . . . . . . . . . 58
	6.2. Informative References . . . . . . . . . . . . . . . . . . 59		11.1. Normative References . . . . . . . . . . . . . . . . . . . 58
	Appendix A. Change Log . . . . . . . . . . . . . . . . . . . . . 60		11.2. Informative References . . . . . . . . . . . . . . . . . . 59
	Appendix B. . . . . . . . . . . . . . . . . . . . . . . . . . . 62		Appendix A. . . . . . . . . . . . . . . . . . . . . . . . . . . 60
	1. Introduction		1. Introduction
	This memo defines a portion of the Management Information Base (MIB)		This memo defines a portion of the Management Information Base (MIB)
	for use with network management protocols in the Internet community.		for use with network management protocols in the Internet community.
	In particular, it describes objects for configuring aspects of the		In particular, it describes objects for configuring parameters of the
	Neighborhood Discovery Protocol (NHDP) [NHDP] process on a router.		Neighborhood Discovery Protocol [NHDP] process on a router. The MIB
	The NHDP MIB also reports state and performance information and		defined in this memo, denoted NHDP-MIB, also reports state,
	notifications. This additional state and performance information is		performance information and notifications. This additional state and
	useful to management stations troubleshooting neighbor discovery		performance information is useful to troubleshoot problems and
	problems.		performance issues during neighbor discovery.
	2. The Internet-Standard Management Framework		2. The Internet-Standard Management Framework
	For a detailed overview of the documents that describe the current		For a detailed overview of the documents that describe the current
	Internet-Standard Management Framework, please refer to section 7 of		Internet-Standard Management Framework, please refer to Section 7 of
	RFC 3410 [RFC3410].		[RFC3410].
	Managed objects are accessed via a virtual information store, termed		Managed objects are accessed via a virtual information store, termed
	the Management Information Base or MIB. MIB objects are generally		the Management Information Base or MIB. MIB objects are generally
	accessed through the Simple Network Management Protocol (SNMP).		accessed through the Simple Network Management Protocol (SNMP).
	Objects in the MIB are defined using the mechanisms defined in the		Objects in the MIB are defined using the mechanisms defined in the
	Structure of Management Information (SMI). This memo specifies a MIB		Structure of Management Information (SMI). This memo specifies a MIB
	module that is compliant to the SMIv2, which is described in STD 58,		module that is compliant to the SMIv2, which is described in
	RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580		[RFC2578], [RFC2579] and [RFC2580].
	[RFC2580].
	3. Conventions		3. Conventions
	The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",		The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
	"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this		"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
	document are to be interpreted as described in RFC 2119 [RFC2119].		OPTIONAL" in this document are to be interpreted as described in
			[RFC2119].
	4. Overview		4. Overview
	The NHDP protocol allows a router in a Mobile Ad-Hoc Network (MANET)		[NHDP] allows a router in a Mobile Ad Hoc Network (MANET) to discover
	to discover and track topological information of routers up to two		and track topological information of routers up to two hops away by
	hops away by virtue of exchanging HELLO messages. This information		virtue of exchanging HELLO messages. This information is useful for
	is useful for routers running various routing and multicast flooding		routers running various routing and multicast flooding protocols
	protocols developed within the IETF MANET Working Group.		developed within the IETF MANET Working Group.
	4.1. Terms		4.1. Terms
	The following definitions apply throughout this document:		The following definitions apply throughout this document:
			o Notification Objects - triggers and associated notification
			messages allowing for asynchronous tracking of pre-defined events
			on the managed router.
	o Configuration Objects - switches, tables, objects which are		o Configuration Objects - switches, tables, objects which are
	initialized to default settings or set through the management		initialized to default settings or set through the management
	interface defined by this MIB.		interface defined by this MIB.
	o State Objects - automatically generated values which define the		o State Objects - automatically generated values which define the
	current operating state of the NHDP protocol process in the		current operating state of the NHDP protocol process in the
	router.		router.
	o Performance Objects - automatically generated values which help an		o Performance Objects - automatically generated values which help an
	administrator or automated tool to assess the performance of the		administrator or automated tool to assess the performance of the
	NHDP protocol process on the router and the overall discovery		NHDP protocol process on the router and the overall discovery
	performance within the NHDP domain.		performance within the MANET.
	o Notification Objects - triggers and associated notification
	messages allowing for asynchronous tracking of pre-defined events
	on the managed device.
	5. Structure of the MIB Module		5. Structure of the MIB Module
	This section presents the structure of the NHDP MIB module. The MIB		This section presents the structure of the NHDP-MIB module. The MIB
	is arranged into the following structure:		is arranged into the following structure:
	o nhdpNotifications - objects defining NHDP MIB notifications.		o nhdpNotifications - objects defining NHDP-MIB notifications.
	o nhdpObjects - management objects within this MIB. The objects are		o nhdpObjects - defining objects within this MIB. The objects are
	arranged into the following groups:		arranged into the following groups:
	* Configuration Group - defining objects related to the		* Configuration Group - defining objects related to the
	configuration of the NHDP instance on the device.		configuration of the NHDP instance on the router.
	* State Group - defining objects which reflect the current state		* State Group - defining objects which reflect the current state
	of the NHDP instance running on the device.		of the NHDP instance running on the router.
	* Performance Group - defining objects which are useful to a		* Performance Group - defining objects which are useful to a
	management station when characterizing the performance of NHDP		management station when characterizing the performance of NHDP
	on the device and in the MANET.		on the router and in the MANET.
	o nhdpConformance - defining the minimal and maximal conformance		o nhdpConformance - defining the minimal and maximal conformance
	requirements for implementations of this MIB.		requirements for implementations of this MIB.
	5.1. Notifications		5.1. Notifications
	The Notifications subtree contains the list of notifications		This section describes the use of notifications, and mechanisms to
	supported within the NHDP-MIB and describes their intended purpose or		enhance the ability to manage NHDP networks.
	utility. The following notifications are specified:
	o nhdpNbrStateChange is a notification sent each time the status of		5.1.1. Introduction
	a neighbor has changed. Possible status values are 'down',
	'asymmetric', and 'symmetric'.
	o nhdp2hopNbrStateChange is a notification sent each time the status		Notifications can be emitted by an NHDP router as a reaction to a
	of a two hop neighbor has changed. Possible status values are		specific event. This allows a network manager to efficiently
	'down' and 'up'.		determine the source of problems or significant changes of
			configuration or topology, instead of polling a possibly large number
			of NHDP routers.
	o nhdpIfRxBadMessage is a notification sent each time an incoming		5.1.2. Notification Generation
	HELLO message has not been successfully parsed on an interface.
	o nhdpIfStateChange is a notification sent each time the status of		When an exception event occurs, the application notifies the local
	an interface of the designated router has changed (i.e. an IP		agent, which sends a notification to the appropriate SNMP management
	address has been added or removed to the interface, or the		stations. The message includes the notification type and may include
	interface has changed its status from 'up' to 'down' or vice		a list of notification-specific variables. Section 7 contains,
	versa).		amongst others, the notification definitions, which includes the
			variable lists. At least one IP address of the NHDP router that
			originates the notification is included in the variable list so that
			the network manager may determine the source of the notification.
			5.1.3. Limiting Frequency of Notifications
			To limit the frequency of notifications, the following additional
			mechanisms are suggested, similar to those in [RFC4750]:
			5.1.3.1. Ignoring Initial Activity
			The majority of critical events occur when NHDP is enabled on a
			router, at which time the symmetric neighbors and two-hop neighbors
			of the NHDP router are discovered. During this initial period, a
			potential flood of notifications is unnecessary since the events are
			expected. To avoid unnecessary notifications, a router should not
			originate expected notifications until a certain time interval has
			elapsed, which is to be predefined by the network manager.
			5.1.3.2. Throttling Traps
			The mechanism for throttling the notifications is the same as in
			[RFC4750] (i.e. the amount of transmitted notifications per time is
			bounded).
			Appropriate values for the window time and upper bound are to be
			selected by the network manager and depend on the deployment of the
			MANET.
			5.1.3.3. One Notification per Event
			Similar to the according mechanism in [RFC4750], only one
			notification is sent per event.
	5.2. The Configuration Group		5.2. The Configuration Group
	The NHDP device is configured with a set of controls. The		The NHDP router is configured with a set of controls. The
	authoritative list of configuration controls within the NHDP-MIB are		authoritative list of configuration controls within the NHDP-MIB are
	found within the MIB module itself. Generally, an attempt was made		found within the MIB module itself. Generally, an attempt was made
	in developing the NHDP-MIB module to support all configuration		in developing the NHDP-MIB module to support all configuration
	objects defined within the NHDP protocol definition [NHDP]. For all		objects defined in [NHDP]. For all of the configuration parameters,
	of the configuration parameters, the same constraints and default		the same constraints and default values of these parameters as
	values of these parameters as defined in [NHDP] are followed.		defined in [NHDP] are followed.
	5.3. The State Group		5.3. The State Group
	The State Group reports current state information, including neighbor		The State Group reports current state information of a router running
	tables. The NHDP-MIB State Group tables were designed to contain the		[NHDP]. The NHDP-MIB State Group tables were designed to contain the
	complete set of state information defined within the information		complete set of state information defined within the information
	bases within the NHDP protocol [NHDP].		bases in [NHDP].
	Two constructs, i.e., TEXTUAL CONVENTIONs, are defined in support of		Two constructs, i.e., TEXTUAL CONVENTIONs, are defined in support of
	the tables in the State Group. These are the NeighborIfIndex and		the tables in the State Group. These are NeighborIfIndex and
	NeighborRouterId. These are locally (to the NHDP device) defined,		NeighborRouterId. These are locally (to the NHDP router) defined,
	unique identifiers. They are used to define indexes to the		unique identifiers. They are used to define indexes to the
	appropriate State Group tables and to correlate table entries to		appropriate State Group tables and to correlate table entries to
	interface addresses, interfaces and routers within the NHDP domain.		interface addresses, interfaces and routers within the MANET.
	The NeighborIfIndex is a unique identifier of discovered NHDP		NeighborIfIndex is a unique identifier of discovered NHDP interfaces
	interfaces on all routers within the NHDP domain. The		on all routers within the MANET. NeighborRouterId is a unique
	NeighborRouterId is a unique identifier of discovered NHDP routers		identifier of discovered NHDP routers within the MANET.
	within the NHDP domain.
	5.4. The Performance Group		5.4. The Performance Group
	The Performance Group reports values relevant to system performance.		The Performance Group reports values relevant to system performance.
	This section lists objects for NHDP performance monitoring, some of		This section lists objects for NHDP performance monitoring, some of
	which explicitly appear in the NHDP-MIB and others which are		which are explicitly defined in the NHDP-MIB and others which are
	obtainable through a combination of base objects from this MIB and		obtainable through a combination of base objects from this MIB and
	reports available through the REPORT-MIB [REPORT]. Throughout this		reports available through the REPORT-MIB [REPORT]. Throughout this
	section those objects will be pointed out that are intended as base		section, those objects will be pointed out that are intended as base
	objects which are explicitly defined within this MIB and those		objects which are explicitly defined within this MIB and those
	objects which are derived through a combination of the NHDP-MIB base		objects which are derived through a combination of the base objects
	objects and capabilities afforded by the REPORT-MIB.		and capabilities offered by the REPORT-MIB.
	Unstable neighbors or 2-hop neighbors and frequent changes of sets		Unstable neighbors or 2-hop neighbors and frequent changes of sets
	can have a negative influence on the performance of NHDP. The		can have a negative influence on the performance of NHDP. The
	following objects allow management applications to acquire		following objects allow management applications to acquire
	information related to the stability and performance of NHDP:		information related to the stability and performance of NHDP:
	The following objects return statistics related to HELLO messages:		The following objects return statistics related to HELLO messages:
	o Total number of sent HELLO messages on an interface		o Total number of sent HELLO messages on an interface
	skipping to change at page 7, line 36		skipping to change at page 8, line 17
	can be derived from, e.g., the nhdpIfHelloMessagePeriodicXmits		can be derived from, e.g., the nhdpIfHelloMessagePeriodicXmits
	Base Object from the NHDP-MIB along with the capabilities		Base Object from the NHDP-MIB along with the capabilities
	derived from the reportHistoryGroup from the REPORT-MIB. The		derived from the reportHistoryGroup from the REPORT-MIB. The
	network management application could convert this information		network management application could convert this information
	into the desired histogram.		into the desired histogram.
	o Changes of the frequency of the message scheduling on an interface		o Changes of the frequency of the message scheduling on an interface
	This object will divide the given time interval from t0 to t1		This object will divide the given time interval from t0 to t1
	into a given number of equal parts. It then creates a		into a given number of equal parts. It then creates a
	histogram for each part and calculates the distances (using the		histogram for each part and calculates the distances (e.g.
	Bhattacharyya distance) between each two adjacent histograms in		using the Bhattacharyya distance) between each two adjacent
	time. A higher value between two histograms means more		histograms in time. A higher value between two histograms
	difference between the histograms. For instance, this is		means more difference between the histograms. For instance,
	representative of an event that suddenly sends many triggered		this is representative of an event that suddenly sends many
	HELLO messages, whereas before there have been only very few		triggered HELLO messages, whereas before there have been only
	such triggered messages.		very few such triggered messages.
	This is a Derived Object to be pulled from the REPORT-MIB, as		This is a Derived Object to be pulled from the REPORT-MIB, as
	previously discussed, albeit this is a bit more complex with		previously discussed, albeit this is a bit more complex with
	respect to the management application.		respect to the management application.
	o Average number of sent HELLO messages per second between the given		o Average number of sent HELLO messages per second between the given
	time t0 and t1 on an interface		time t0 and t1 on an interface
	This is a Derived Object to be pulled from the		This is a Derived Object to be pulled from the
	reportSampledGroup from the REPORT-MIB. It is derived from,		reportSampledGroup from the REPORT-MIB. It is derived from,
	e.g., the nhdpIfHelloMessageXmits Base Object.		e.g., the nhdpIfHelloMessageXmits Base Object.
	o Average number of received HELLO messages per second on an		o Average number of received HELLO messages per second on an
	interface between the given time t0 and t1		interface between the given time t0 and t1
	This is a Derived Object to be pulled from the REPORT-MIB. See		This is a Derived Object to be pulled from the REPORT-MIB. See
	the previous discussion.		the previous discussion.
	skipping to change at page 8, line 33		skipping to change at page 9, line 16
	o Total accumulated size in octets of received HELLO messages on an		o Total accumulated size in octets of received HELLO messages on an
	interface		interface
	This is a Base Object.		This is a Base Object.
	Object name: nhdpIfHelloMessageRecvdAccumulatedSize		Object name: nhdpIfHelloMessageRecvdAccumulatedSize
	Object type: Counter32		Object type: Counter32
	o Average size in octets of sent HELLO messages between the given		o Average size in octets of sent HELLO messages between the given
	time t0 and t1 on an interface.		time t0 and t1 on an interface
	This is a Derived Object to be pulled from the		This is a Derived Object to be pulled from the
	reportSampledGroup from the REPORT-MIB. It is derived from,		reportSampledGroup from the REPORT-MIB. It is derived from,
	e.g., the nhdpIfHelloMessageRecvdAccumulatedSize Base Object		e.g., the nhdpIfHelloMessageRecvdAccumulatedSize Base Object
	from this NHDP-MIB.		from this NHDP-MIB.
	o Average size in octets of received HELLO messages between the		o Average size in octets of received HELLO messages between the
	given time t0 and t1 on an interface		given time t0 and t1 on an interface
	This is a Derived Object to be pulled from the REPORT-MIB. See		This is a Derived Object to be pulled from the REPORT-MIB. See
	previous discussion.		previous discussion.
	o Total accumulated number of advertised symmetric neighbors in		o Total accumulated number of advertised symmetric neighbors in
	HELLOs on that interface		HELLOs on that interface.
	This is a Base Object.		This is a Base Object.
	Object name:		Object name:
	nhdpIfHelloMessageXmitAccumulatedSymmetricNeighborCount		nhdpIfHelloMessageXmitAccumulatedSymmetricNeighborCount
	Object type: Counter32		Object type: Counter32
	o Total accumulated number of advertised heard neighbors in HELLOs		o Total accumulated number of advertised heard neighbors in HELLOs
	on that interface		on that interface
	skipping to change at page 10, line 42		skipping to change at page 11, line 24
	This is a Derived Object to be pulled from the		This is a Derived Object to be pulled from the
	reportHistoryGroup from the REPORT-MIB. It is derived from the		reportHistoryGroup from the REPORT-MIB. It is derived from the
	previously discussed Base Object. The network management		previously discussed Base Object. The network management
	application would develop the histograms based upon lists		application would develop the histograms based upon lists
	obtained from the REPORT-MIB.		obtained from the REPORT-MIB.
	o Changes of the frequency of the Neighbor Set changes		o Changes of the frequency of the Neighbor Set changes
	This object will divide the given time interval from t0 to t1		This object will divide the given time interval from t0 to t1
	into a given number of equal parts. It then creates a		into a given number of equal parts. It then creates a
	histogram for each part and calculates the distances (using the		histogram for each part and calculates the distances (e.g.
	Bhattacharyya distance) between each two adjacent histograms in		using the Bhattacharyya distance) between each two adjacent
	time. A higher value between two histograms means more		histograms in time. A higher value between two histograms
	difference between the histograms.		means more difference between the histograms.
	This is a Derived Object to be pulled from the		This is a Derived Object to be pulled from the
	reportHistoryGroup from the REPORT-MIB. It is derived from the		reportHistoryGroup from the REPORT-MIB. It is derived from the
	previously discussed Base Object. The network management		previously discussed Base Object. The network management
	application could then compute the desired metrics.		application could then compute the desired metrics.
	The next objects examine the uptime of a given neighbor:		The next objects examine the uptime of a given neighbor:
	o Number of changes of a Neighbor Tuple		o Number of changes of a Neighbor Tuple
	skipping to change at page 11, line 18		skipping to change at page 11, line 49
	This is a Base Object.		This is a Base Object.
	Object name: nhdpDiscNeighborNibNeighborSetChanges		Object name: nhdpDiscNeighborNibNeighborSetChanges
	Object type: Counter32		Object type: Counter32
	o Neighbor uptime		o Neighbor uptime
	Returns the number of hundredths of a second since the Neighbor		Returns the number of hundredths of a second since the Neighbor
	Tuple corresponding to the given neighbor was registered		Tuple corresponding to the given neighbor exists.
	This is a Base Object.		This is a Base Object.
	Object name: nhdpDiscNeighborNibNeighborSetUpTime		Object name: nhdpDiscNeighborNibNeighborSetUpTime
	Object type: TimeTicks		Object type: TimeTicks
	o Acquire history of change of onlink status of a given neighbor		o Acquire history of change of onlink status of a given neighbor
	This object returns the history of the exact timestamps of each		This object returns the history of the exact timestamps of each
	skipping to change at page 14, line 45		skipping to change at page 15, line 34
	between a change of the onlink status of a given 2-hop		between a change of the onlink status of a given 2-hop
	neighbor. The histogram includes all changes that have been		neighbor. The histogram includes all changes that have been
	made after the given time t0 and before the given time t1.		made after the given time t0 and before the given time t1.
	This is a Derived Object to be pulled from the		This is a Derived Object to be pulled from the
	reportHistoryGroup from the REPORT-MIB. It is derived from the		reportHistoryGroup from the REPORT-MIB. It is derived from the
	previously discussed Base Object, nhdpIib2HopSetPerfChanges		previously discussed Base Object, nhdpIib2HopSetPerfChanges
	counter. The network management application would develop the		counter. The network management application would develop the
	histograms based upon lists obtained from the REPORT-MIB.		histograms based upon lists obtained from the REPORT-MIB.
	5.5. Relationship to Other MIB Modules		6. Relationship to Other MIB Modules
	This section specifies the relationship of the MIB modules contained		This section specifies the relationship of the MIB modules contained
	in this document to other standards, particularly to standards		in this document to other standards, particularly to standards
	containing other MIB modules. Definitions imported from other MIB		containing other MIB modules. Definitions imported from other MIB
	modules and other MIB modules that SHOULD be implemented in		modules and other MIB modules that SHOULD be implemented in
	conjunction with the MIB module contained within this document are		conjunction with the MIB module contained within this document are
	identified in this section.		identified in this section.
	5.5.1. Relationship to the SNMPv2-MIB		6.1. Relationship to the SNMPv2-MIB
	The 'system' group in the SNMPv2-MIB [RFC3418] is defined as being		The 'system' group in the SNMPv2-MIB [RFC3418] is defined as being
	mandatory for all systems, and the objects apply to the entity as a		mandatory for all systems, and the objects apply to the entity as a
	whole. The 'system' group provides identification of the management		whole. The 'system' group provides identification of the management
	entity and certain other system-wide data. The NHDP-MIB does not		entity and certain other system-wide data. The NHDP-MIB does not
	duplicate those objects.		duplicate those objects.
	5.5.2. Relationship to the OLSRv2-MIB		6.2. Relationship to Routing Protocol MIBs relying on the NHDP-MIB
	The OLSRv2 [OLSRv2] routing protocol relies upon the NHDP protocol		[NHDP] allows routing protocols to rely on the neighborhood
	for neighbor reachability information. In order to troubleshoot,		information that is discovered by means of HELLO message exchange.
	fault isolate, and manage the OLSRv2 protocol through the OLSRv2-MIB		In order to allow for troubleshoot, fault isolate, and manage such
	[OLSRv2], it was necessary to align the State Group tables of these		routing protocols through a routing protocol MIB, it may be desired
	two MIBs. This is accomplished through the definition of two		to align the State Group tables of the NHDP-MIB and the routing
	TEXTUAL-CONVENTIONS, i.e. the NeighborInterfaceId and the		protocol MIB. This is accomplished through the definition of two
	NeighborRouterId. These object type are used to develop indexes into		TEXTUAL-CONVENTIONS in the NHDP-MIB: the NeighborInterfaceId and the
	common NHDP-MIB and OLSRv2-MIB State Group tables. These objects are		NeighborRouterId. These object types are used to develop indexes
	locally significant but should be locally common to the NHDP-MIB and		into common NHDP-MIB and routing protocol State Group tables. These
	OLSRv2-MIBs implemented on a common networked device. This will		objects are locally significant but should be locally common to the
	allow for improved cross referencing of information across the two		NHDP-MIB and the routing protocol MIB implemented on a common
	MIBs.		networked router. This will allow for improved cross referencing of
			information across the two MIBs.
	5.5.3. Relationship to the REPORT-MIB		6.3. Relationship to the REPORT-MIB
	This document describes many useful Performance Management metrics		This document describes several Performance Management metrics for
	for the management of NHDP network devices. However, not all of		the management of NHDP network routers. However, not all of these
	these metrics are explicitly defined solely within the context of		metrics are explicitly defined solely within the context of this
	this NHDP-MIB. Some of these metrics are obtained through joint		NHDP-MIB. Some of these metrics are obtained through joint
	interaction between this MIB and the REPORT-MIB [REPORT]. This NHDP-		interaction between this MIB and the REPORT-MIB [REPORT]. This NHDP-
	MIB defines the minimum necessary objects (often of type COUNTER)		MIB defines the minimum necessary objects (often of type COUNTER)
	which form the underlying basis for more sophisticated Performance		which form the underlying basis for more sophisticated Performance
	Management reporting available in conjunction with the REPORT-MIB.		Management reporting available in conjunction with the REPORT-MIB.
	Note however, that the implementation of the NHDP-MIB is independent		See Section 5.4 for a discussion of the performance metrics for NHDP
	of any implementations of the REPORT-MIB. See the discussion of the		management.
	performance metrics for NHDP management in the Performance Group
	section of this document.
	5.5.4. MIB modules required for IMPORTS		6.4. MIB modules required for IMPORTS
	The following NHDP-MIB module IMPORTS objects from SNMPv2-SMI		The following NHDP-MIB module IMPORTS objects from SNMPv2-SMI
	[RFC2578], SNMPv2-TC [RFC2579], SNMPv2-CONF [RFC2580], IF-MIB		[RFC2578], SNMPv2-TC [RFC2579], SNMPv2-CONF [RFC2580], IF-MIB
	[RFC2863], INET-ADDRESS-MIB [RFC4001], and SMIng [RFC3781].		[RFC2863], INET-ADDRESS-MIB [RFC4001], and SMIng [RFC3781].
	5.6. Definitions		7. Definitions
			This section contains the MIB module defined by the specification.
	NHDP-MIB DEFINITIONS ::= BEGIN		NHDP-MIB DEFINITIONS ::= BEGIN
	IMPORTS		IMPORTS
			Float32
			FROM SMIng --[RFC3781]
	MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,		MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
	Counter32, Integer32, Unsigned32, mib-2, TimeTicks		Counter32, Integer32, Unsigned32, mib-2, TimeTicks
	FROM SNMPv2-SMI --[RFC2578]		FROM SNMPv2-SMI --[RFC2578]
	TEXTUAL-CONVENTION, TruthValue, RowStatus		TEXTUAL-CONVENTION, TruthValue, TimeStamp,
			RowStatus
	FROM SNMPv2-TC --[RFC2579]		FROM SNMPv2-TC --[RFC2579]
	MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP		MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
	FROM SNMPv2-CONF --[STD58]		FROM SNMPv2-CONF --[STD58]
	InetAddressType, InetAddress,		InetAddressType, InetAddress,
	InetAddressPrefixLength		InetAddressPrefixLength
	FROM INET-ADDRESS-MIB --[RFC4001]		FROM INET-ADDRESS-MIB --[RFC4001]
	InterfaceIndexOrZero		InterfaceIndexOrZero
	FROM IF-MIB --[RFC2863]		FROM IF-MIB --[RFC2863]
	;		;
	nhdpMIB MODULE-IDENTITY		nhdpMIB MODULE-IDENTITY
	LAST-UPDATED "201011081000Z" -- November 08,2010		LAST-UPDATED "201011111000Z" -- November 11,2010
	ORGANIZATION "IETF MANET working group"		ORGANIZATION "IETF MANET working group"
	CONTACT-INFO		CONTACT-INFO
	"WG E-Mail: manet@ietf.org		"WG E-Mail: manet@ietf.org
	WG Chairs: ian.chakeres@gmail.com		WG Chairs: ian.chakeres@gmail.com
	jmacker@nrl.navy.mil		jmacker@nrl.navy.mil
	Editors: Ulrich Herberg		Editors: Ulrich Herberg
	Ecole Polytechnique		Ecole Polytechnique
	LIX		LIX
	91128 Palaiseau Cedex		91128 Palaiseau Cedex
	France		France
			+33 1 69 33 41 26
	ulrich@herberg.name		ulrich@herberg.name
	http://www.herberg.name/		http://www.herberg.name/
	Robert G. Cole		Robert G. Cole
	US Army CERDEC		US Army CERDEC
	Space and Terrestrial Communications		Space and Terrestrial Communications
	328 Hopkins Road		328 Hopkins Road
	Bldg 245, Room 16		Bldg 245, Room 16
	Aberdeen Proving Ground, MD 21005		Aberdeen Proving Ground, MD 21005
	USA		USA
	skipping to change at page 17, line 4		skipping to change at page 17, line 49
	Robert G. Cole		Robert G. Cole
	US Army CERDEC		US Army CERDEC
	Space and Terrestrial Communications		Space and Terrestrial Communications
	328 Hopkins Road		328 Hopkins Road
	Bldg 245, Room 16		Bldg 245, Room 16
	Aberdeen Proving Ground, MD 21005		Aberdeen Proving Ground, MD 21005
	USA		USA
	+1 410 278-6779		+1 410 278-6779
	robert.g.cole@us.army.mil		robert.g.cole@us.army.mil
	http://www.cs.jhu.edu/~rgcole/		http://www.cs.jhu.edu/~rgcole/
	Ian D Chakeres		Ian D Chakeres
	CenGen		CenGen
	9250 Bendix Road North		9250 Bendix Road North
	Columbia, Maryland 21045		Columbia, Maryland 21045
	USA		USA
	ian.chakeres@gmail.com		ian.chakeres@gmail.com
	http://www.ianchak.com/"		http://www.ianchak.com/"
	DESCRIPTION		DESCRIPTION
	"This NHDP MIB module is applicable to devices		"This NHDP-MIB module is applicable to routers
	implementing the Neighborhood Discovery Protocol		implementing the Neighborhood Discovery Protocol
	defined in [RFC XXXX].		defined in [RFC XXXX].
	Copyright (C) The IETF Trust (2009). This version		Copyright (C) The IETF Trust (2009). This version
	of this MIB module is part of RFC XXXX; see the RFC		of this MIB module is part of RFC xxxx; see the RFC
	itself for full legal notices."		itself for full legal notices."
	-- revision		-- revision
	REVISION "201011081000Z" -- November 08, 2010		REVISION "201011111000Z" -- November 11, 2010
	DESCRIPTION		DESCRIPTION
	"The eight version of this MIB module,		"The ninth version of this MIB module,
	published as draft-ietf-manet-nhdp-mib-05.txt.		published as draft-ietf-manet-nhdp-mib-06.txt.
	This is TBD."		Corrected editorial issues, fixed some small
	REVISION "201006301000Z" -- June 30, 2010		bugs in the MIB (indexing, InetAddressTypes)"
			REVISION "201011081000Z" -- November 08, 2010
			DESCRIPTION
			"The eight version of this MIB module,
			published as draft-ietf-manet-nhdp-mib-05.txt.
			This is TBD."
			REVISION "201007071000Z" -- July 07, 2010
	DESCRIPTION		DESCRIPTION
	"The seventh version of this MIB module,		"The seventh version of this MIB module,
	published as draft-ietf-manet-nhdp-mib-04.txt.		published as draft-ietf-manet-nhdp-mib-04.txt.
	Cleaned up and condensed the textual material		Cleaned up and condensed the textual material
	in the earlier sections of this draft. Check		in the earlier sections of this draft. Checked
	consistency with NHDP draft, i.e.,		consistency with NHDP draft, i.e.,
	draft-ietf-manet-nhdp-12.txt."		draft-ietf-manet-nhdp-12.txt."
	REVISION "201003081000Z" -- March 08, 2010		REVISION "201003081000Z" -- March 08, 2010
	DESCRIPTION		DESCRIPTION
	"The sixth version of this MIB module,		"The sixth version of this MIB module,
	published as draft-ietf-manet-nhdp-mib-03.txt.		published as draft-ietf-manet-nhdp-mib-03.txt.
	Added the local nhdpIfIndex to the		Added the local nhdpIfIndex to the
	nhdpIibLinkSetTable."		nhdpIibLinkSetTable."
	REVISION "200911091000Z" -- November 09, 2009		REVISION "200911091000Z" -- November 09, 2009
	DESCRIPTION		DESCRIPTION
	skipping to change at page 18, line 41		skipping to change at page 19, line 47
	--		--
	-- Textual Conventions		-- Textual Conventions
	--		--
	NeighborIfIndex ::= TEXTUAL-CONVENTION		NeighborIfIndex ::= TEXTUAL-CONVENTION
	DISPLAY-HINT "d"		DISPLAY-HINT "d"
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"A locally arbitrary unique identifier associated with an		"A locally arbitrary unique identifier associated with an
	NHDP neighbor interface.		NHDP neighbor interface.
	All objects of type NeighborIfIndex are assigned by the agent		All objects of type NeighborIfIndex are assigned by the agent
	out of a common number space. In other words, NeighborIfIndex		out of a common number space. In other words, NeighborIfIndex
	values assigned to entries in one table must not overlap with		values assigned to entries in one table must not overlap with
	NeighborIfIndex values assigned to entries in another		NeighborIfIndex values assigned to entries in another
	table.		table.
	The NeighborIfIndex defines a discovered interface of a 1-hop		The NeighborIfIndex defines a discovered interface of a 1-hop
	or 2-hop neighbor of the local router. The agent identifies		or 2-hop neighbor of the local router. The agent identifies a
	a unique neighbor interface through the receipt of an		unique neighbor interface through the receipt of an address
	address list advertised through an NHDP HELLO message.		lists advertised through an NHDP HELLO message.
	The value for each discovered neighbor interface must remain		The value for each discovered neighbor interface must remain
	constant at least from one re-initialization of the entity's		constant at least from one re-initialization of the entity's
	network management system to the next re-initialization,		network management system to the next re-initialization, except
	except that if an application is deleted and re-created.		that if an application is deleted and re-created.
	The specific value is meaningful only within a given SNMP		The specific value is meaningful only within a given SNMP
	entity. An NeighborIfIndex value must not be re-used until		entity. An NeighborIfIndex value must not be re-used until the
	the next agent restart."		next agent restart."
	SYNTAX Unsigned32 (1..2147483647)		SYNTAX Unsigned32 (1..2147483647)
	NeighborRouterId ::= TEXTUAL-CONVENTION		NeighborRouterId ::= TEXTUAL-CONVENTION
	DISPLAY-HINT "d"		DISPLAY-HINT "d"
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"A locally arbitrary unique identifier associated with an		"A locally arbitrary unique identifier associated with an
	NHDP discovered peer router.		NHDP discovered peer router.
	All objects of type NeighborRouterId are assigned by the		All objects of type NeighborRouterId are assigned by the agent
	agent out of a common number space.		out of a common number space.
	The NeighborRouterId defines a discovered NHDP peer of		The NeighborRouterId defines a discovered NHDP peer of
	the local router. The agent identifies a		the local router. The agent identifies a
	unique neighbor through the receipt of address		unique neighbor interface through the receipt of a address
	lists advertised through an NHDP HELLO messages.		lists advertised through a NHDP HELLO messages.
	The value for each discovered neighbor ID must remain		The value for each discovered neighbor ID must remain
	constant at least from one re-initialization of the entity's		constant at least from one re-initialization of the entity's
	network management system to the next re-initialization,		network management system to the next re-initialization, except
	except that if an application is deleted and re-created.		that if an application is deleted and re-created.
	The specific value is meaningful only within a given SNMP		The specific value is meaningful only within a given SNMP
	entity. An NeighborRouterId value must not be re-used until		entity. An NeighborRouterId value must not be re-used until the
	the next agent restart."		next agent restart."
	SYNTAX Unsigned32 (1..2147483647)		SYNTAX Unsigned32 (1..2147483647)
	--		--
	-- nhdpObjects		-- nhdpObjects
	--		--
			-- 1) Configuration Objects Group
			-- 2) State Objects Group
			-- 3) Performance Objects Group
	--		--
	-- nhdpConfigurationObjGrp		-- nhdpConfigurationObjGrp
	--		--
	-- Contains the NHDP objects which configure specific options		-- Contains the NHDP objects which configure specific options
	-- which determine the overall performance and operation of the		-- which determine the overall performance and operation of the
	-- discovery protocol.		-- discovery protocol.
	nhdpConfigurationObjGrp OBJECT IDENTIFIER ::= { nhdpObjects 1 }		nhdpConfigurationObjGrp OBJECT IDENTIFIER ::= { nhdpObjects 1 }
	nhdpInterfaceTable OBJECT-TYPE		nhdpInterfaceTable OBJECT-TYPE
	SYNTAX SEQUENCE OF NhdpInterfaceEntry		SYNTAX SEQUENCE OF NhdpInterfaceEntry
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The NHDP Interface Table describes the		"nhdpInterfaceTable describes the
	configuration of the interfaces of this NHDP device.		configuration of the interfaces of this NHDP router.
	The ifIndex is from the interfaces group		The ifIndex is from the interfaces group
	defined in the Interfaces Group MIB.		defined in the Interfaces Group MIB.
	The object 'nhdpIfStatus' provides the functionality		nhdpIfStatus provides the functionality
	expected by the NHDP in the Local Interface Base (LIB)		expected by the NHDP in the Local Interface Base (LIB)
	Local Interface Set Table. Hence, the Local Interface		Local Interface Set Table. Hence, the Local Interface
	Set Table will not be defined below.		Set Table will not be defined below.
	The objects in this table are persistent and when		The objects in this table are persistent and when
	written the entity SHOULD save the change to		written the entity SHOULD save the change to
	non-volatile storage."		non-volatile storage."
	REFERENCE		REFERENCE
	"RFC 2863 - The Interfaces Group MIB, McCloghrie,		"RFC 2863 - The Interfaces Group MIB, McCloghrie,
	K., and F. Kastenholtz, June 2000."		K., and F. Kastenholtz, June 2000."
	::= { nhdpConfigurationObjGrp 1 }		::= { nhdpConfigurationObjGrp 1 }
	nhdpInterfaceEntry OBJECT-TYPE		nhdpInterfaceEntry OBJECT-TYPE
	SYNTAX NhdpInterfaceEntry		SYNTAX NhdpInterfaceEntry
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The NHDP interface entry describes one NHDP		"nhdpInterfaceEntry describes one NHDP
	local interface configuration as indexed by		local interface configuration as indexed by
	its ifIndex as defined in the Standard MIB II		its ifIndex as defined in the Standard MIB II
	Interface Table (RFC2863)."		Interface Table (RFC2863)."
	INDEX { nhdpIfIndex }		INDEX { nhdpIfIndex }
	::= { nhdpInterfaceTable 1 }		::= { nhdpInterfaceTable 1 }
	NhdpInterfaceEntry ::=		NhdpInterfaceEntry ::=
	SEQUENCE {		SEQUENCE {
	nhdpIfIndex		nhdpIfIndex
	InterfaceIndexOrZero,		InterfaceIndexOrZero,
	skipping to change at page 21, line 18		skipping to change at page 22, line 28
	Unsigned32,		Unsigned32,
	nhdpHelloMinInterval		nhdpHelloMinInterval
	Unsigned32,		Unsigned32,
	nhdpRefreshInterval		nhdpRefreshInterval
	Unsigned32,		Unsigned32,
	nhdpLHoldTime		nhdpLHoldTime
	Unsigned32,		Unsigned32,
	nhdpHHoldTime		nhdpHHoldTime
	Unsigned32,		Unsigned32,
	nhdpHystAcceptQuality		nhdpHystAcceptQuality
	Integer32,		Float32,
	nhdpHystRejectQuality		nhdpHystRejectQuality
	Integer32,		Float32,
	nhdpInitialQuality		nhdpInitialQuality
	Integer32,		Float32,
	nhdpInitialPending		nhdpInitialPending
	TruthValue,		TruthValue,
	nhdpHpMaxJitter		nhdpHpMaxJitter
	Unsigned32,		Unsigned32,
	nhdpHtMaxJitter		nhdpHtMaxJitter
	Unsigned32,		Unsigned32,
	nhdpIfRowStatus		nhdpIfRowStatus
	RowStatus		RowStatus
	}		}
	skipping to change at page 21, line 46		skipping to change at page 23, line 8
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The ifIndex for this interface."		"The ifIndex for this interface."
	::= { nhdpInterfaceEntry 1 }		::= { nhdpInterfaceEntry 1 }
	nhdpIfStatus OBJECT-TYPE		nhdpIfStatus OBJECT-TYPE
	SYNTAX TruthValue		SYNTAX TruthValue
	MAX-ACCESS read-write		MAX-ACCESS read-write
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The nhpdIfStatus indicates whether this interface is		"nhpdIfStatus indicates whether this interface is
	a MANET interface. A value of true(1) indicates		a MANET interface. A value of true(1) indicates
	that the interface is a MANET interface. A value of		that the interface is a MANET interface. A value of
	false(2) indicates that the interface is not a MANET		false(2) indicates that the interface is not a MANET
	interface. This corresponds to the I_manet parameter		interface. This corresponds to the I_manet parameter
	in the Local Interface Set, which is omitted in this MIB		in the Local Interface Set, which is omitted in this MIB
	due to the redundancy with the nhdpInterfaceTable."		due to the redundancy with the nhdpInterfaceTable."
	DEFVAL { 2 }		DEFVAL { 2 }
	::= { nhdpInterfaceEntry 2 }		::= { nhdpInterfaceEntry 2 }
	--		--
	-- Interface Parameters - Message Intervals		-- Interface Parameters - Message Intervals
	--		--
	nhdpHelloInterval OBJECT-TYPE		nhdpHelloInterval OBJECT-TYPE
	SYNTAX Unsigned32		SYNTAX Unsigned32
	UNITS "milliseconds"		UNITS "milliseconds"
	MAX-ACCESS read-write		MAX-ACCESS read-write
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The nhpdHelloInterval is the maximum time		"nhpdHelloInterval corresponds to
	between the transmission of two successive		HELLO_INTERVAL of NHDP.
	HELLO messages on this MANET interface.
	The following constraints apply to this		The following constraint applies to this
	parameter:		parameter:
	'nhpdHelloInterval ge 0'		nhpdHelloInterval >= nhdpHelloMinInterval"
	'nhpdHelloInterval ge nhdpHelloMinInterval'"
	REFERENCE		REFERENCE
	"The NHDP draft.		"The NHDP draft.
	See Section 5 on Protocol Parameters and		Section 5 on Protocol Parameters and
	Constraints."		Constraints."
	DEFVAL { 2000 }		DEFVAL { 2000 }
	::= { nhdpInterfaceEntry 3 }		::= { nhdpInterfaceEntry 3 }
	nhdpHelloMinInterval OBJECT-TYPE		nhdpHelloMinInterval OBJECT-TYPE
	SYNTAX Unsigned32		SYNTAX Unsigned32
	UNITS "milliseconds"		UNITS "milliseconds"
	MAX-ACCESS read-write		MAX-ACCESS read-write
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The nhpdHelloMinInterval is the minimum interval		"nhpdHelloMinInterval corresponds to
	between transmission of two successive HELLO		HELLO_MIN_INTERVAL of NHDP."
	messages, on this MANET interface.
	The following constraints apply to this
	parameter:
	'nhdpHelloMinInterval gt 0'"
	REFERENCE		REFERENCE
	"The NHDP draft.		"The NHDP draft.
	See Section 5 on Protocol Parameters and		Section 5 on Protocol Parameters and
	Constraints."		Constraints."
	DEFVAL { 500 }		DEFVAL { 500 }
	::= { nhdpInterfaceEntry 4 }		::= { nhdpInterfaceEntry 4 }
	nhdpRefreshInterval OBJECT-TYPE		nhdpRefreshInterval OBJECT-TYPE
	SYNTAX Unsigned32		SYNTAX Unsigned32
	UNITS "milliseconds"		UNITS "milliseconds"
	MAX-ACCESS read-write		MAX-ACCESS read-write
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The nhpdRefreshInterval is the maximum interval		"nhpdRefreshInterval corresponds to
	between advertisements, in a HELLO message on this		REFRESH_INTERVAL of NHDP.
	MANET interface, of each 1-hop neighbor network
	address and its status.
	The following constraint applies to this		The following constraint applies to this
	parameter:		parameter:
	'nhdpRefreshInterval ge nhdpHelloInterval'"		nhdpRefreshInterval >= nhdpHelloInterval"
	REFERENCE		REFERENCE
	"The NHDP draft.		"The NHDP draft.
	See Section 5 on Protocol Parameters and		Section 5 on Protocol Parameters and
	Constraints."		Constraints."
	DEFVAL { 2000 }		DEFVAL { 2000 }
	::= { nhdpInterfaceEntry 5 }		::= { nhdpInterfaceEntry 5 }
	--		--
	-- Interface Parameters - Information Validity times		-- Interface Parameters - Information Validity times
	--		--
	nhdpLHoldTime OBJECT-TYPE		nhdpLHoldTime OBJECT-TYPE
	SYNTAX Unsigned32		SYNTAX Unsigned32
	UNITS "milliseconds"		UNITS "milliseconds"
	MAX-ACCESS read-write		MAX-ACCESS read-write
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The nhdpLHoldTime is used to define the time		"nhdpLHoldTime corresponds to
	for which a recently used and replaced		L_HOLD_TIME of NHDP."
	originator address is used to recognize
	the router's own messages.
	The following constraint applies to this
	parameter:
	'nhdpLHoldTime ge 0'"
	REFERENCE		REFERENCE
	"The NHDP draft.		"The NHDP draft.
	See Section 5 on Protocol Parameters and		Section 5 on Protocol Parameters and
	Constraints."		Constraints."
	DEFVAL { 6000 }		DEFVAL { 6000 }
	::= { nhdpInterfaceEntry 6 }		::= { nhdpInterfaceEntry 6 }
	nhdpHHoldTime OBJECT-TYPE		nhdpHHoldTime OBJECT-TYPE
	SYNTAX Unsigned32		SYNTAX Unsigned32
	UNITS "milliseconds"		UNITS "milliseconds"
	MAX-ACCESS read-write		MAX-ACCESS read-write
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The nhdpHHoldTime is used to define the time		"nhdpHHoldTime corresponds to
	for which a recently used and replaced		H_HOLD_TIME of NHDP.
	originator address is used to recognize
	the router's own messages.
	The following constraint applies to this		This object is persistent and when written
	parameter:		the entity SHOULD save the change to
	'nhdpHHoldTime ge 0'"		non-volatile storage."
	REFERENCE		REFERENCE
	"The NHDP draft.		"The NHDP draft.
	See Section 5 on Protocol Parameters and		Section 5 on Protocol Parameters and
	Constraints."		Constraints."
	DEFVAL { 6000 }		DEFVAL { 6000 }
	::= { nhdpInterfaceEntry 7 }		::= { nhdpInterfaceEntry 7 }
	--		--
	-- Interface Parameters - Link Quality		-- Interface Parameters - Link Quality
	-- (is optional and settings define operation)		-- (is optional and settings define operation)
	--		--
	nhdpHystAcceptQuality OBJECT-TYPE		nhdpHystAcceptQuality OBJECT-TYPE
	SYNTAX Integer32 (0..255)		SYNTAX Float32
	MAX-ACCESS read-write		MAX-ACCESS read-write
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The nhdpHystAcceptQuality is the		"nhdpHystAcceptQuality corresponds to
	link quality threshold at or above		HYST_ACCEPT of NHDP.
	which a link becomes usable,
	if it was not already so.
	The following constraint applies to this		The following constraint applies to this
	parameter:		parameter:
	'0 le nhdpHystRejectQuality		0 <= nhdpHystRejectQuality
	le nhdpHystAcceptQuality le 255'"		<= nhdpHystAcceptQuality <= 1.0"
	REFERENCE		REFERENCE
	"The NHDP draft.		"The NHDP draft.
	Section 5 on Protocol Parameters and		Section 5 on Protocol Parameters and
	Constraints."		Constraints."
	DEFVAL { 255 }		-- DEFVAL { 1.0 }
	::= { nhdpInterfaceEntry 8 }		::= { nhdpInterfaceEntry 8 }
	nhdpHystRejectQuality OBJECT-TYPE		nhdpHystRejectQuality OBJECT-TYPE
	SYNTAX Integer32 (0..255)		SYNTAX Float32
	MAX-ACCESS read-write		MAX-ACCESS read-write
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The nhdpHystRejectQuality is the		"nhdpHystRejectQuality corresponds to
	link quality threshold below which		HYST_REJECT of NHDP.
	a link becomes unusable, if it
	was not already so.
	The following constraint applies to this		The following constraint applies to this
	parameter:		parameter:
	'0 le nhdpHystRejectQuality		0 <= nhdpHystRejectQuality
	le nhdpHystAcceptQuality le 255'"		<= nhdpHystAcceptQuality <= 1.0"
	REFERENCE		REFERENCE
	"The NHDP draft.		"The NHDP draft.
	See Section 5 on Protocol Parameters and		Section 5 on Protocol Parameters and
	Constraints."		Constraints."
	DEFVAL { 0 }		-- DEFVAL { 0.0 }
	::= { nhdpInterfaceEntry 9 }		::= { nhdpInterfaceEntry 9 }
	nhdpInitialQuality OBJECT-TYPE		nhdpInitialQuality OBJECT-TYPE
	SYNTAX Integer32 (0..255)		SYNTAX Float32
	MAX-ACCESS read-write		MAX-ACCESS read-write
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The nhdpInitialQuality is the		"nhdpInitialQuality corresponds to
	initial quality of a newly		INITIAL_QUALITY of NHDP.
	identified link.
	The following constraint applies to this		The following constraint applies to this
	parameter:		parameter:
	'0 le nhdpInitialQuality le 255'"		0 <= nhdpInitialQuality <= 1.0"
	REFERENCE		REFERENCE
	"The NHDP draft.		"The NHDP draft.
	See Section 5 on Protocol Parameters and		Section 5 on Protocol Parameters and
	Constraints."		Constraints."
	DEFVAL { 255 }		-- DEFVAL { 1.0 }
	::= { nhdpInterfaceEntry 10 }		::= { nhdpInterfaceEntry 10 }
	nhdpInitialPending OBJECT-TYPE		nhdpInitialPending OBJECT-TYPE
	SYNTAX TruthValue		SYNTAX TruthValue
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The nhdpInitialPending is defined as		"nhdpInitialPending corresponds to
	follows:		INITIAL_PENDING of NHDP."
	If true, then a newly identified link
	is considered pending, and is not
	usable until the link quality has
	reached or exceeded the
	nhdpHystAccept threshold."
	REFERENCE		REFERENCE
	"The NHDP draft.		"The NHDP draft.
	See Section 5 on Protocol Parameters and		Section 5 on Protocol Parameters and
	Constraints."		Constraints."
	DEFVAL { 2 }		DEFVAL { 2 } -- i.e. false
	::= { nhdpInterfaceEntry 11 }		::= { nhdpInterfaceEntry 11 }
	--		--
	-- Interface Parameters - Jitter		-- Interface Parameters - Jitter
	--		--
	nhdpHpMaxJitter OBJECT-TYPE		nhdpHpMaxJitter OBJECT-TYPE
	SYNTAX Unsigned32		SYNTAX Unsigned32
	UNITS "milliseconds"		UNITS "milliseconds"
	MAX-ACCESS read-write		MAX-ACCESS read-write
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The nhdpHpMaxJitter represents the		"nhdpHpMaxJitter corresponds to
	value of MAXJITTER used in [4] for		HP_MAXJITTER of NHDP."
	periodically generated HELLO messages
	on this MANET interface."
	REFERENCE		REFERENCE
	"The NHDP draft.		"The NHDP draft.
	See Section 5 on Protocol Parameters and		Section 5 on Protocol Parameters and
	Constraints."		Constraints."
	DEFVAL { 500 }		DEFVAL { 500 }
	::= { nhdpInterfaceEntry 12 }		::= { nhdpInterfaceEntry 12 }
	nhdpHtMaxJitter OBJECT-TYPE		nhdpHtMaxJitter OBJECT-TYPE
	SYNTAX Unsigned32		SYNTAX Unsigned32
	UNITS "milliseconds"		UNITS "milliseconds"
	MAX-ACCESS read-write		MAX-ACCESS read-write
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The nhdpHtMaxJitter represents the		"nhdpHtMaxJitter corresponds to
	value of MAXJITTER used in [4] for		HT_MAXJITTER of NHDP."
	externally triggered HELLO messages
	on this MANET interface."
	REFERENCE		REFERENCE
	"The NHDP draft.		"The NHDP draft.
	See Section 5 on Protocol Parameters and		Section 5 on Protocol Parameters and
	Constraints."		Constraints."
	DEFVAL { 500 }		DEFVAL { 500 }
	::= { nhdpInterfaceEntry 13 }		::= { nhdpInterfaceEntry 13 }
	nhdpIfRowStatus OBJECT-TYPE		nhdpIfRowStatus OBJECT-TYPE
	SYNTAX RowStatus		SYNTAX RowStatus
	MAX-ACCESS read-create		MAX-ACCESS read-create
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This object permits management of the table		"This object permits management of the table
	by facilitating actions such as row creation,		by facilitating actions such as row creation,
	construction, and destruction. The value of		construction, and destruction. The value of
	this object has no effect on whether other		this object has no effect on whether other
	objects in this conceptual row can be		objects in this conceptual row can be
	skipping to change at page 27, line 28		skipping to change at page 28, line 12
	--		--
	-- Router Parameters - Information Validity Time		-- Router Parameters - Information Validity Time
	--		--
	nhdpNHoldTime OBJECT-TYPE		nhdpNHoldTime OBJECT-TYPE
	SYNTAX Unsigned32		SYNTAX Unsigned32
	UNITS "milliseconds"		UNITS "milliseconds"
	MAX-ACCESS read-write		MAX-ACCESS read-write
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The nhdpHHoldTime is used as the period		"nhdpNHoldTime corresponds to
	during which former 1-hop neighbor		N_HOLD_TIME of NHDP.
	addresses are advertised as lost in
	HELLO messages, allowing recipients of
	these HELLO messages to accelerate removal
	of information from their 2-Hop Sets.
	N_HOLD_TIME can be set to zero if
	accelerated information removal is not
	required.
	The following constraint applies to this
	parameter:
	'nhdpHHoldTime ge 0'
	This object is persistent and when written		This object is persistent and when written
	the entity SHOULD save the change to		the entity SHOULD save the change to
	non-volatile storage."		non-volatile storage."
	REFERENCE		REFERENCE
	"The NHDP draft.		"The NHDP draft.
	See Section 5 on Protocol Parameters and		Section 5 on Protocol Parameters and
	Constraints."		Constraints."
	DEFVAL { 6000 }		DEFVAL { 6000 }
	::= { nhdpConfigurationObjGrp 2 }		::= { nhdpConfigurationObjGrp 2 }
	nhdpIHoldTime OBJECT-TYPE		nhdpIHoldTime OBJECT-TYPE
	SYNTAX Unsigned32		SYNTAX Unsigned32
	UNITS "milliseconds"		UNITS "milliseconds"
	MAX-ACCESS read-write		MAX-ACCESS read-write
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The nhdpIHoldTime is the period		"nhdpIHoldTime corresponds to
	for which a recently used local		I_HOLD_TIME of NHDP.
	interface address is recorded.
	The following constraint applies to this
	parameter:
	'nhdpIHoldTime ge 0'
	This object is persistent and when written		This object is persistent and when written
	the entity SHOULD save the change to		the entity SHOULD save the change to
	non-volatile storage."		non-volatile storage."
	REFERENCE		REFERENCE
	"The NHDP draft.		"The NHDP draft.
	See Section 5 on Protocol Parameters and		Section 5 on Protocol Parameters and
	Constraints."		Constraints."
	DEFVAL { 6000 }		DEFVAL { 6000 }
	::= { nhdpConfigurationObjGrp 3 }		::= { nhdpConfigurationObjGrp 3 }
	--		--
	-- nhdpStateObjGrp		-- nhdpStateObjGrp
	--		--
	-- Contains information describing the current state of the NHDP		-- Contains information describing the current state of the NHDP
	-- process.		-- process.
	nhdpStateObjGrp OBJECT IDENTIFIER ::= { nhdpObjects 2 }		nhdpStateObjGrp OBJECT IDENTIFIER ::= { nhdpObjects 2 }
	-- Before building the NHDP Information Bases, we define		-- Two new constructs have been defined in this MIB for
	-- two new constructs for indexing into the following		-- indexing into the following
	-- tables and indexing into other tables in other MIBs.		-- tables and indexing into other tables in other MIBs.
	-- The NeighborIfIndex defines a unique (to the local router)		-- The NeighborIfIndex defines a unique (to the local router)
	-- index referencing a discovered interface on another		-- index referencing a discovered interface on another
	-- router within the NHDP MANET. The NeighborRouterId defines a		-- router within the MANET. The NeighborRouterId defines a
	-- unique (to the local router) index referencing a discovered		-- unique (to the local router) index referencing a discovered
	-- router within the NHDP MANET.		-- router within the MANET.
	-- This table is indexed by an IpAddr associated with		-- This table is indexed by an IpAddr associated with
	-- NeighborIfIndex. Multiple addresses can be associated		-- NeighborIfIndex. Multiple addresses can be associated
	-- with a given NeighborIfIndex. Each NeighborIfIndex is		-- with a given NeighborIfIndex. Each NeighborIfIndex is
	-- associated with a NeighborRouterId. Throughout this MIB,		-- associated with a NeighborRouterId. Throughout this MIB,
	-- the NeighborIfIndex and the NeighborRouterId are used		-- the NeighborIfIndex and the NeighborRouterId are used
	-- to define the set of IpAddrs related to the interface		-- to define the set of IpAddrs related to the interface
	-- in discussion.		-- in discussion.
	nhdpUpTime OBJECT-TYPE		nhdpUpTime OBJECT-TYPE
	SYNTAX TimeTicks		SYNTAX TimeTicks
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The number of hundredths of a second since the		"The number of hundredths of a second since the
	current NHDP process was initialized."		current NHDP process was initialized."
	REFERENCE		REFERENCE
	"The NHDP draft."		"The NHDP draft."
	::= { nhdpStateObjGrp 1 }		::= { nhdpStateObjGrp 1 }
	nhdpDiscIfSetTable OBJECT-TYPE		nhdpDiscIfSetTable OBJECT-TYPE
	SYNTAX SEQUENCE OF NhdpDiscIfSetEntry		SYNTAX SEQUENCE OF NhdpDiscIfSetEntry
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"A router's set of discovered interfaces on		"A router's set of discovered interfaces on
	neighboring routers."		neighboring routers."
	skipping to change at page 29, line 45		skipping to change at page 30, line 16
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The entries include the nhdpDiscRouterId of		"The entries include the nhdpDiscRouterId of
	the discovered router, the nhdpDiscIfIndex		the discovered router, the nhdpDiscIfIndex
	of the discovered interface and the		of the discovered interface and the
	current set of addresses associated		current set of addresses associated
	with this neighbor interface. The		with this neighbor interface. The
	nhdpDiscIfIndex has to uniquely identify		nhdpDiscIfIndex has to uniquely identify
	the remote interface address sets. It		the remote interface address sets. It
	need not be unique across the MANET.		does not need to be unique across the MANET.
	It must be unique within this router."		It must be unique within this router."
	REFERENCE		REFERENCE
	"This document."		"This document."
	INDEX { nhdpDiscIfSetIpAddrType,		INDEX { nhdpDiscIfSetIpAddrType,
	nhdpDiscIfSetIpAddr }		nhdpDiscIfSetIpAddr }
	::= { nhdpDiscIfSetTable 1 }		::= { nhdpDiscIfSetTable 1 }
	NhdpDiscIfSetEntry ::=		NhdpDiscIfSetEntry ::=
	SEQUENCE {		SEQUENCE {
	nhdpDiscIfSetRouterId		nhdpDiscIfSetRouterId
	NeighborRouterId,		NeighborRouterId,
	nhdpDiscIfSetIndex		nhdpDiscIfSetIndex
	NeighborIfIndex,		NeighborIfIndex,
	nhdpDiscIfSetIpAddrType		nhdpDiscIfSetIpAddrType
	InetAddressType,		InetAddressType,
	skipping to change at page 30, line 31		skipping to change at page 30, line 48
	nhdpDiscIfSetRouterId OBJECT-TYPE		nhdpDiscIfSetRouterId OBJECT-TYPE
	SYNTAX NeighborRouterId		SYNTAX NeighborRouterId
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The NHDP router ID (locally created)		"The NHDP router ID (locally created)
	of a neighboring router. Used for cross		of a neighboring router. Used for cross
	indexing into other NHDP tables and other		indexing into other NHDP tables and other
	MIBs."		MIBs."
	REFERENCE		REFERENCE
	"This NHDP-MIB draft."		"This document."
	::= { nhdpDiscIfSetEntry 1 }		::= { nhdpDiscIfSetEntry 1 }
	nhdpDiscIfSetIndex OBJECT-TYPE		nhdpDiscIfSetIndex OBJECT-TYPE
	SYNTAX NeighborIfIndex		SYNTAX NeighborIfIndex
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The NHDP interface index (locally created)		"The NHDP interface index (locally created)
	of a neighbor's interface. Used for cross		of a neighbor's interface. Used for cross
	indexing into other NHDP tables and other		indexing into other NHDP tables and other
	skipping to change at page 31, line 34		skipping to change at page 32, line 4
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"Indicates the number of leading one bits that form the		"Indicates the number of leading one bits that form the
	mask to be logical-ANDed with the destination address		mask to be logical-ANDed with the destination address
	before being compared to the value in the		before being compared to the value in the
	nhdpDiscIfSetAddr field. If the resulting		nhdpDiscIfSetAddr field. If the resulting
	address block is contained in a block in this		address block is contained in a block in this
	table, then a match should be returned."		table, then a match should be returned."
	REFERENCE		REFERENCE
	"The NHDP draft."		"The NHDP draft."
	::= { nhdpDiscIfSetEntry 5 }		::= { nhdpDiscIfSetEntry 5 }
	-- An NHDP router's Local Information Base (LIB)		-- An NHDP router's Local Information Base (LIB)
	-- Local IF Set Table		-- Note: Local IF Set Table is not specified in this
	-- Entry (foreach IF): (IfAddrList,		-- MIB because the table would be redundant with
	-- PrefixMask,		-- information in nhdpInterfaceTable.
	-- Manet_indication)
	--
	-- This table is redundant with information in
	-- the nhdpInterfaceTable above. Hence it is not
	-- reproduced within this MIB module.
	-- Removed Interface Addr Set Table		-- Removed Interface Addr Set Table
	-- Entry (foreach Addr): (IfAddrRemoved,		-- Entry (foreach Addr): (IfAddrRemoved,
	-- ExpirationTime)		-- ExpirationTime)
	nhdpLibRemovedIfAddrSetTable OBJECT-TYPE		nhdpLibRemovedIfAddrSetTable OBJECT-TYPE
	SYNTAX SEQUENCE OF NhdpLibRemovedIfAddrSetEntry		SYNTAX SEQUENCE OF NhdpLibRemovedIfAddrSetEntry
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"A router's Removed Interface Address Set records		"A router's Removed Interface Address Set records
	network addresses which were recently used as local		network addresses which were recently used as local
	interface network addresses. If a router's interface		interface network addresses. If a router's interface
	network addresses are immutable then the Removed		network addresses are immutable then the Removed
	Interface Address Set is always empty and MAY be omitted.		Interface Address Set is always empty and MAY be omitted.
	It consists of Removed Interface Address Tuples, one		It consists of Removed Interface Address Tuples, one
	per network address."		per network address."
	REFERENCE		REFERENCE
	"The NHDP draft."		"The NHDP draft."
	::= { nhdpStateObjGrp 3 }		::= { nhdpStateObjGrp 3 }
	nhdpLibRemovedIfAddrSetEntry OBJECT-TYPE		nhdpLibRemovedIfAddrSetEntry OBJECT-TYPE
	SYNTAX NhdpLibRemovedIfAddrSetEntry		SYNTAX NhdpLibRemovedIfAddrSetEntry
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"A router's Removed Interface Address Set consists		"A router's Removed Interface Address Set consists
	of Removed Interface Address Tuples, one per network		of Removed Interface Address Tuples, one per network
	address:		address:
	(IR_local_iface_addr, IR_time)		(IR_local_iface_addr, IR_time)
	The association between these addrs and		The association between these addrs and
	the router's Interface is found in the		the router's Interface is found in the
	Standard MIB II's IP addr table		Standard MIB II's IP address table
	(RFC1213)."		(RFC1213)."
	REFERENCE
	"The NHDP draft."
	INDEX { nhdpLibRemovedIfAddrSetIpAddrType,
	nhdpLibRemovedIfAddrSetIpAddr }
	::= { nhdpLibRemovedIfAddrSetTable 1 }
	NhdpLibRemovedIfAddrSetEntry ::=		REFERENCE
	SEQUENCE {		"The NHDP draft."
			INDEX { nhdpLibRemovedIfAddrSetIpAddrType,
			nhdpLibRemovedIfAddrSetIpAddr }
			::= { nhdpLibRemovedIfAddrSetTable 1 }
			NhdpLibRemovedIfAddrSetEntry ::=
			SEQUENCE {
	nhdpLibRemovedIfAddrSetIpAddrType		nhdpLibRemovedIfAddrSetIpAddrType
	InetAddressType,		InetAddressType,
	nhdpLibRemovedIfAddrSetIpAddr		nhdpLibRemovedIfAddrSetIpAddr
	InetAddress,		InetAddress,
	nhdpLibRemovedIfAddrSetIpAddrPrefixLen		nhdpLibRemovedIfAddrSetIpAddrPrefixLen
	InetAddressPrefixLength,		InetAddressPrefixLength,
	nhdpLibRemovedIfAddrSetIfIndex		nhdpLibRemovedIfAddrSetIfIndex
	InterfaceIndexOrZero,		InterfaceIndexOrZero,
	nhdpLibRemovedIfAddrSetIrTime		nhdpLibRemovedIfAddrSetIrTime
	TimeTicks		TimeStamp
	}		}
	nhdpLibRemovedIfAddrSetIpAddrType OBJECT-TYPE		nhdpLibRemovedIfAddrSetIpAddrType OBJECT-TYPE
	SYNTAX InetAddressType		SYNTAX InetAddressType
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The type of the nhdpLibRemovedIfAddrSetIpAddr		"The type of the nhdpLibRemovedIfAddrSetIpAddr
	in the InetAddress MIB [RFC 4001]."		in the InetAddress MIB [RFC 4001]."
	REFERENCE		REFERENCE
	"The NHDP draft."		"The NHDP draft."
	::= { nhdpLibRemovedIfAddrSetEntry 1 }		::= { nhdpLibRemovedIfAddrSetEntry 1 }
	nhdpLibRemovedIfAddrSetIpAddr OBJECT-TYPE		nhdpLibRemovedIfAddrSetIpAddr OBJECT-TYPE
	SYNTAX InetAddress		SYNTAX InetAddress
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The nhdpLibRemovedIfAddrSetAddr is a		"nhdpLibRemovedIfAddrSetAddr is a
	recently used address of an interface of		recently used address of an interface of
	this router."		this router."
	REFERENCE		REFERENCE
	"The NHDP draft."		"The NHDP draft."
	::= { nhdpLibRemovedIfAddrSetEntry 2 }		::= { nhdpLibRemovedIfAddrSetEntry 2 }
	nhdpLibRemovedIfAddrSetIpAddrPrefixLen OBJECT-TYPE		nhdpLibRemovedIfAddrSetIpAddrPrefixLen OBJECT-TYPE
	SYNTAX InetAddressPrefixLength		SYNTAX InetAddressPrefixLength
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"Indicates the number of leading one bits that form the		"Indicates the number of leading one bits that form the
	mask to be logical-ANDed with the address		mask to be logical-ANDed with the address
	to determine the network address to which		to determine the network address to which
	this interface is attached."		this interface is attached."
	REFERENCE		REFERENCE
	"The NHDP draft."		"The NHDP draft."
	::= { nhdpLibRemovedIfAddrSetEntry 3 }		::= { nhdpLibRemovedIfAddrSetEntry 3 }
	nhdpLibRemovedIfAddrSetIfIndex OBJECT-TYPE		nhdpLibRemovedIfAddrSetIfIndex OBJECT-TYPE
	SYNTAX InterfaceIndexOrZero		SYNTAX InterfaceIndexOrZero
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"Specifies the local IfIndex from which this		"Specifies the local IfIndex from which this
	Ip addr was recently removed."		IP address was recently removed."
	REFERENCE		REFERENCE
	"The NHDP draft."		"The NHDP draft."
	::= { nhdpLibRemovedIfAddrSetEntry 4 }		::= { nhdpLibRemovedIfAddrSetEntry 4 }
	nhdpLibRemovedIfAddrSetIrTime OBJECT-TYPE		nhdpLibRemovedIfAddrSetIrTime OBJECT-TYPE
	SYNTAX TimeTicks		SYNTAX TimeStamp
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"Specifies when this Tuple expires and MUST be removed		"Specifies when this Tuple expires and MUST be removed
	from this table. This represents the number of		from this table."
	hundredths of a second following the time that		REFERENCE
	the current NHDP process was initialized."		"The NHDP draft."
	REFERENCE		::= { nhdpLibRemovedIfAddrSetEntry 5 }
	"The NHDP draft."
	::= { nhdpLibRemovedIfAddrSetEntry 5 }
	-- Interface Information Base (IIB)		-- Interface Information Base (IIB)
	--		--
	-- NHDP Interface Information Base (IIB)		-- NHDP Interface Information Base (IIB)
	--		--
	-- IIB Link Set		-- IIB Link Set
	-- Entry (foreach 1-H neighbor): (NeighborIfAddrList,		-- Entry (foreach 1-H neighbor): (NeighborIfAddrList,
	-- HeardTime,		-- HeardTime,
	skipping to change at page 34, line 37		skipping to change at page 35, line 5
	--		--
	-- IIB Link Set		-- IIB Link Set
	-- Entry (foreach 1-H neighbor): (NeighborIfAddrList,		-- Entry (foreach 1-H neighbor): (NeighborIfAddrList,
	-- HeardTime,		-- HeardTime,
	-- SymTime,		-- SymTime,
	-- Quality,		-- Quality,
	-- Pending,		-- Pending,
	-- Lost,		-- Lost,
	-- ExpireTime)		-- ExpireTime)
	nhdpIibLinkSetTable OBJECT-TYPE		nhdpIibLinkSetTable OBJECT-TYPE
	SYNTAX SEQUENCE OF NhdpIibLinkSetEntry		SYNTAX SEQUENCE OF NhdpIibLinkSetEntry
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"A Link Set of an interface records links from		"A Link Set of an interface records links from
	other routers which are, or recently		other routers which are, or recently
	were, 1-hop neighbors."		were, 1-hop neighbors."
	REFERENCE		REFERENCE
	"The NHDP draft."		"The NHDP draft."
	::= { nhdpStateObjGrp 4 }		::= { nhdpStateObjGrp 4 }
	nhdpIibLinkSetEntry OBJECT-TYPE		nhdpIibLinkSetEntry OBJECT-TYPE
	SYNTAX NhdpIibLinkSetEntry		SYNTAX NhdpIibLinkSetEntry
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"A Link Set consists of Link Tuples, each		"A Link Set consists of Link Tuples, each
	representing a single link indexed by the		representing a single link indexed by the
	local and remote interface pair:		local and remote interface pair:
	(L_neighbor_iface_addr_list, L_HEARD_time,		(L_neighbor_iface_addr_list, L_HEARD_time,
	L_SYM_time, L_quality, L_pending,		L_SYM_time, L_quality, L_pending,
	L_lost, L_time)."		L_lost, L_time).
	REFERENCE
	"This NHDP-MIB draft."
	INDEX { nhdpIfIndex,
	nhdpIibLinkSet1HopIfIndex }
	::= { nhdpIibLinkSetTable 1 }
	NhdpIibLinkSetEntry ::=		Note that L_quality is not included in the
	SEQUENCE {		entries below, because updates may be
			required too frequently."
			REFERENCE
			"This document."
			INDEX { nhdpIfIndex,
			nhdpIibLinkSet1HopIfIndex }
			::= { nhdpIibLinkSetTable 1 }
			NhdpIibLinkSetEntry ::=
			SEQUENCE {
	nhdpIibLinkSet1HopIfIndex		nhdpIibLinkSet1HopIfIndex
	NeighborIfIndex,		NeighborIfIndex,
	nhdpIibLinkSetLHeardTime		nhdpIibLinkSetLHeardTime
	TimeTicks,		TimeStamp,
	nhdpIibLinkSetLSymTime		nhdpIibLinkSetLSymTime
	TimeTicks,		TimeStamp,
	nhdpIibLinkSetLQuality
	Integer32,
	nhdpIibLinkSetLPending		nhdpIibLinkSetLPending
	TruthValue,		TruthValue,
	nhdpIibLinkSetLLost		nhdpIibLinkSetLLost
	TruthValue,		TruthValue,
	nhdpIibLinkSetLTime		nhdpIibLinkSetLTime
	TimeTicks		TimeStamp
	}		}
	nhdpIibLinkSet1HopIfIndex OBJECT-TYPE		nhdpIibLinkSet1HopIfIndex OBJECT-TYPE
	SYNTAX NeighborIfIndex		SYNTAX NeighborIfIndex
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The nhdpIibLinkSet1HopIfIndex is		"nhdpIibLinkSet1HopIfIndex is
	the value of the NeighborIfIndex (from		the value of the NeighborIfIndex (from
	table nhdpDiscIfSetTable above). This		nhdpDiscIfSetTable). This
	object is repeated here to support		object is repeated here to support
	table walks to view the set of neighbors		table walks to view the set of neighbors
	of this router."		of this router."
	REFERENCE		REFERENCE
	"The NHDP draft."		"The NHDP draft."
	::= { nhdpIibLinkSetEntry 1 }		::= { nhdpIibLinkSetEntry 1 }
	nhdpIibLinkSetLHeardTime OBJECT-TYPE		nhdpIibLinkSetLHeardTime OBJECT-TYPE
	SYNTAX TimeTicks		SYNTAX TimeStamp
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The nhdpIibLinkSetLHeardTime is		"nhdpIibLinkSetLHeardTime corresponds
	the time until which the MANET		to L_HEARD_time of NHDP."
	interface of the 1-hop neighbor
	would be considered heard if not
	considering link quality. This
	is measured in hundredths of a second
	since the NHDP process was last
	initialized."
	REFERENCE		REFERENCE
	"The NHDP draft."		"The NHDP draft."
	::= { nhdpIibLinkSetEntry 2 }		::= { nhdpIibLinkSetEntry 2 }
	nhdpIibLinkSetLSymTime OBJECT-TYPE		nhdpIibLinkSetLSymTime OBJECT-TYPE
	SYNTAX TimeTicks		SYNTAX TimeStamp
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The nhdpIibLinkSetLSymTime is the		"nhdpIibLinkSetLSymTime corresponds
	time until which the link to the		to L_SYM_time of NHDP."
	1-hop neighbor would be considered
	symmetric if not considering link
	quality. This is measured in hundredths
	of a second since the NHDP process
	was last initialized."
	REFERENCE		REFERENCE
	"The NHDP draft."		"The NHDP draft."
	::= { nhdpIibLinkSetEntry 3 }		::= { nhdpIibLinkSetEntry 3 }
	nhdpIibLinkSetLQuality OBJECT-TYPE
	SYNTAX Integer32 (0..255)
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"The nhdpIibLinkSetLQuality is a
	dimensionless number between 0
	(inclusive) and 255 (inclusive)
	describing the quality of a link;
	a greater value of L_quality
	indicating a higher quality link."
	REFERENCE
	"The NHDP draft."
	::= { nhdpIibLinkSetEntry 4 }
	nhdpIibLinkSetLPending OBJECT-TYPE		nhdpIibLinkSetLPending OBJECT-TYPE
	SYNTAX TruthValue		SYNTAX TruthValue
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The nhdpIibLinkSetLPending is a		"nhdpIibLinkSetLPending corresponds
	Boolean flag, describing if a		to L_pending of NHDP"
	link is considered pending (i.e.,
	a candidate, but not yet
	established, link)."
	REFERENCE		REFERENCE
	"The NHDP draft."		"The NHDP draft."
	::= { nhdpIibLinkSetEntry 5 }		::= { nhdpIibLinkSetEntry 4 }
	nhdpIibLinkSetLLost OBJECT-TYPE		nhdpIibLinkSetLLost OBJECT-TYPE
	SYNTAX TruthValue		SYNTAX TruthValue
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The nhdpIibLinkSetLLost is a		"nhdpIibLinkSetLLost corresponds
	Boolean flag, describing if a		to L_lost of NHDP"
	link is considered lost due
	to link quality."
	REFERENCE		REFERENCE
	"The NHDP draft."		"The NHDP draft."
	::= { nhdpIibLinkSetEntry 6 }		::= { nhdpIibLinkSetEntry 5 }
	nhdpIibLinkSetLTime OBJECT-TYPE		nhdpIibLinkSetLTime OBJECT-TYPE
	SYNTAX TimeTicks		SYNTAX TimeStamp
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The nhdpIibLinkSetLTime specifies		"nhdpIibLinkSetLTime specifies
	when this Tuple expires and MUST		when this Tuple expires and MUST
	be removed. This is measured in hundredths		be removed."
	of a second since the NHDP process last
	initialized."
	REFERENCE		REFERENCE
	"The NHDP draft."		"The NHDP draft."
	::= { nhdpIibLinkSetEntry 7 }		::= { nhdpIibLinkSetEntry 6 }
	--		--
	-- IIB 2-Hop Set		-- IIB 2-Hop Set
	-- Entry (foreach IF on a 2-H neighbor):		-- Entry (foreach IF on a 2-H neighbor):
	-- (1NeighIfAddrList,		-- (1NeighIfAddrList,
	-- 2NeighIfAddr,		-- 2NeighIfAddr,
	-- ExpireTime)		-- ExpireTime)
	--		--
	nhdpIib2HopSetTable OBJECT-TYPE		nhdpIib2HopSetTable OBJECT-TYPE
	SYNTAX SEQUENCE OF NhdpIib2HopSetEntry		SYNTAX SEQUENCE OF NhdpIib2HopSetEntry
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"A 2-Hop Set of an interface records network		"A 2-Hop Set of an interface records network
	addresses of symmetric 2-hop neighbors, and		addresses of symmetric 2-hop neighbors, and
	the symmetric links to symmetric 1-hop neighbors		the symmetric links to symmetric 1-hop neighbors
	through which these symmetric 2-hop neighbors		through which these symmetric 2-hop neighbors
	can be reached. It consists of 2-Hop Tuples,		can be reached. It consists of 2-Hop Tuples,
	each representing a single network address of		each representing a single network address of
	a symmetric 2-hop neighbor, and a single MANET		a symmetric 2-hop neighbor, and a single MANET
	interface of a symmetric 1-hop neighbor.		interface of a symmetric 1-hop neighbor.
	(N2_neighbor_iface_addr_list,		(N2_neighbor_iface_addr_list,
	N2_2hop_addr, N2_time)."		N2_2hop_addr, N2_time)."
	REFERENCE		REFERENCE
	"The NHDP draft."		"The NHDP draft."
	::= { nhdpStateObjGrp 5 }		::= { nhdpStateObjGrp 5 }
	nhdpIib2HopSetEntry OBJECT-TYPE		nhdpIib2HopSetEntry OBJECT-TYPE
	SYNTAX NhdpIib2HopSetEntry		SYNTAX NhdpIib2HopSetEntry
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The entries include the 2 hop neighbor addrs,		"The entries include the 2-hop neighbor addresses,
	which act as the table index, and associated		which act as the table index, and associated
	1 hop symmetric link addr set, designated through		1-hop symmetric link address set, designated
	the nhdpDiscIfIndex, and an expiration time."		through nhdpDiscIfIndex, and an expiration time."
	REFERENCE		REFERENCE
	"This NHDP-MIB draft."		"This document."
	INDEX { nhdpIib2HopSetIpAddressType,		INDEX { nhdpIib2HopSetIpAddressType,
	nhdpIib2HopSetIpAddress }		nhdpIib2HopSetIpAddress }
	::= { nhdpIib2HopSetTable 1 }		::= { nhdpIib2HopSetTable 1 }
	NhdpIib2HopSetEntry ::=		NhdpIib2HopSetEntry ::=
	SEQUENCE {		SEQUENCE {
	nhdpIib2HopSetIpAddressType		nhdpIib2HopSetIpAddressType
	InetAddressType,		InetAddressType,
	nhdpIib2HopSetIpAddress		nhdpIib2HopSetIpAddress
	InetAddress,		InetAddress,
	nhdpIib2HopSet1HopIfIndex		nhdpIib2HopSet1HopIfIndex
	NeighborIfIndex,		NeighborIfIndex,
	nhdpIib2HopSetN2Time		nhdpIib2HopSetN2Time
	TimeTicks		TimeStamp
	}		}
	nhdpIib2HopSetIpAddressType OBJECT-TYPE		nhdpIib2HopSetIpAddressType OBJECT-TYPE
	SYNTAX InetAddressType		SYNTAX InetAddressType
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The type of the nhdpIib2HopSetIpAddress		"The type of the nhdpIib2HopSetIpAddress
	in the InetAddress MIB [RFC 4001]."		in the InetAddress MIB [RFC 4001]."
	REFERENCE		REFERENCE
	skipping to change at page 39, line 17		skipping to change at page 39, line 4
	nhdpIib2HopSetIpAddressType OBJECT-TYPE		nhdpIib2HopSetIpAddressType OBJECT-TYPE
	SYNTAX InetAddressType		SYNTAX InetAddressType
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The type of the nhdpIib2HopSetIpAddress		"The type of the nhdpIib2HopSetIpAddress
	in the InetAddress MIB [RFC 4001]."		in the InetAddress MIB [RFC 4001]."
	REFERENCE		REFERENCE
	"The NHDP draft."		"The NHDP draft."
	::= { nhdpIib2HopSetEntry 1 }		::= { nhdpIib2HopSetEntry 1 }
	nhdpIib2HopSetIpAddress OBJECT-TYPE		nhdpIib2HopSetIpAddress OBJECT-TYPE
	SYNTAX InetAddress		SYNTAX InetAddress
	MAX-ACCESS not-accessible		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The nhdpIib2HopSetIpAddr is an		"nhdpIib2HopSetIpAddr corresponds
	address of an interface of a symmetric		to N2_2hop_addr of NHDP."
	2-hop neighbor which has a symmetric
	link (using any MANET interface) to
	the indicated symmetric 1-hop neighbor."
	REFERENCE		REFERENCE
	"The NHDP draft."		"The NHDP draft."
	::= { nhdpIib2HopSetEntry 2 }		::= { nhdpIib2HopSetEntry 2 }
	nhdpIib2HopSet1HopIfIndex OBJECT-TYPE		nhdpIib2HopSet1HopIfIndex OBJECT-TYPE
	SYNTAX NeighborIfIndex		SYNTAX NeighborIfIndex
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The nhdpIib2HopSet1HopIfIndex is		"nhdpIib2HopSet1HopIfIndex is
	NeighborIfIndex of the one hop		NeighborIfIndex of the one hop
	neighbor which communicated the ipAddress		neighbor which communicated the ipAddress
	of the 2 hop neighbor in this row entry."		of the 2-hop neighbor in this row entry."
	REFERENCE		REFERENCE
	"The NHDP draft."		"The NHDP draft."
	::= { nhdpIib2HopSetEntry 3 }		::= { nhdpIib2HopSetEntry 3 }
	nhdpIib2HopSetN2Time OBJECT-TYPE		nhdpIib2HopSetN2Time OBJECT-TYPE
	SYNTAX TimeTicks		SYNTAX TimeStamp
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The nhdpIib2HopSetN2Time specifies		"nhdpIib2HopSetN2Time specifies
	when this column entry expires and		when this column entry expires and
	MUST be removed. This is measured in		MUST be removed."
	hundredths of a second since the
	NHDP process last initialized."
	REFERENCE		REFERENCE
	"The NHDP draft."		"The NHDP draft."
	::= { nhdpIib2HopSetEntry 4 }		::= { nhdpIib2HopSetEntry 4 }
	--		--
	-- Neighbor Information Base (NIB)		-- Neighbor Information Base (NIB)
	--		--
	-- Each router maintains a Neighbor Information Base		-- Each router maintains a Neighbor Information Base
	-- that records information about addresses of		-- that records information about addresses of
	-- current and recently symmetric 1-hop neighbors.		-- current and recently symmetric 1-hop neighbors.
	--
	-- All addresses MUST have an associated prefix
	-- length. Prefix lengths are indicated in HELLO
	-- messages as specified in [1]; if an address
	-- has no specified prefix length, then its prefix
	-- length is equal to the address length. Two
	-- addresses are considered equal if and only
	-- if their associated prefix lengths are also equal.
	-- NIB Neighbor Set		-- NIB Neighbor Set
	-- Entry (foreach 1-H Neighbor):		-- Entry (foreach 1-H Neighbor):
	-- (AllIfAddrListOfIhNeighbor,		-- (AllIfAddrListOfIhNeighbor,
	-- SymmetricIndicator)		-- SymmetricIndicator)
	-- The NIB Neighbor Set Table is small because		-- The NIB Neighbor Set Table is small because
	-- most of the corresponding information is found		-- most of the corresponding information is found
	-- in the nhdpDiscoveredIfTable above.		-- in the nhdpDiscoveredIfTable above.
	--		--
	nhdpNibNeighborSetTable OBJECT-TYPE		nhdpNibNeighborSetTable OBJECT-TYPE
	skipping to change at page 41, line 17		skipping to change at page 40, line 38
	of Neighbor Tuples, each representing		of Neighbor Tuples, each representing
	a single 1-hop neighbor:		a single 1-hop neighbor:
	(N_neighbor_addr_list,		(N_neighbor_addr_list,
	N_symmetric)"		N_symmetric)"
	REFERENCE		REFERENCE
	"This document."		"This document."
	INDEX { nhdpDiscIfSetRouterId }		INDEX { nhdpDiscIfSetRouterId }
	::= { nhdpNibNeighborSetTable 1 }		::= { nhdpNibNeighborSetTable 1 }
	NhdpNibNeighborSetEntry ::=		NhdpNibNeighborSetEntry ::=
	SEQUENCE {		SEQUENCE {
	nhdpNibNeighborSetNSymmetric		nhdpNibNeighborSetNSymmetric
	TruthValue		TruthValue
	}		}
	nhdpNibNeighborSetNSymmetric OBJECT-TYPE		nhdpNibNeighborSetNSymmetric OBJECT-TYPE
	SYNTAX TruthValue		SYNTAX TruthValue
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The nhdpNibNeighborNSymmetric is		"nhdpNibNeighborNSymmetric corresponds
	a Boolean flag, describing if this		to N_symmetric of NHDP."
	is a symmetric 1-hop neighbor."
	REFERENCE		REFERENCE
	"The NHDP draft."		"The NHDP draft."
	::= { nhdpNibNeighborSetEntry 1 }		::= { nhdpNibNeighborSetEntry 1 }
	-- Lost Neighbor Set		-- Lost Neighbor Set
	-- Entry ( foreach IF foreach 1-H Neighbor): (IfAddr,		-- Entry ( foreach IF foreach 1-H Neighbor): (IfAddr,
	-- ExpireTime)		-- ExpireTime)
	--		--
	nhdpNibLostNeighborSetTable OBJECT-TYPE		nhdpNibLostNeighborSetTable OBJECT-TYPE
	SYNTAX SEQUENCE OF NhdpNibLostNeighborSetEntry		SYNTAX SEQUENCE OF NhdpNibLostNeighborSetEntry
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"A router's Lost Neighbor Set records network		"A router's Lost Neighbor Set records network
	addresses of routers which recently were		addresses of routers which recently were
	symmetric 1-hop neighbors, but which are now		symmetric 1-hop neighbors, but which are now
	advertised as lost."		advertised as lost."
	REFERENCE		REFERENCE
	"The NHDP draft."		"The NHDP draft."
			::= { nhdpStateObjGrp 7 }
	::= { nhdpStateObjGrp 7 }
	nhdpNibLostNeighborSetEntry OBJECT-TYPE		nhdpNibLostNeighborSetEntry OBJECT-TYPE
	SYNTAX NhdpNibLostNeighborSetEntry		SYNTAX NhdpNibLostNeighborSetEntry
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"A router's Lost Neighbor Set consists of		"A router's Lost Neighbor Set consists of
	Lost Neighbor Tuples, each representing a		Lost Neighbor Tuples, each representing a
	single such network address:		single such network address:
	(NL_neighbor_addr, NL_time)"		(NL_neighbor_addr, NL_time)"
	REFERENCE		REFERENCE
	"This NHDP-MIB draft."		"This document."
	INDEX { nhdpDiscIfSetRouterId }		INDEX { nhdpDiscIfSetRouterId }
	::= { nhdpNibLostNeighborSetTable 1 }		::= { nhdpNibLostNeighborSetTable 1 }
	NhdpNibLostNeighborSetEntry ::=		NhdpNibLostNeighborSetEntry ::=
	SEQUENCE {		SEQUENCE {
	nhdpNibLostNeighborSetNLTime		nhdpNibLostNeighborSetNLTime
	TimeTicks		TimeStamp
	}		}
	nhdpNibLostNeighborSetNLTime OBJECT-TYPE		nhdpNibLostNeighborSetNLTime OBJECT-TYPE
	SYNTAX TimeTicks		SYNTAX TimeStamp
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The nhdpNibLostNeighborSetNLTime		"nhdpNibLostNeighborSetNLTime
	specifies when this Tuple expires		specifies when this Tuple expires
	and MUST be removed. This is measured in		and MUST be removed."
	hundredths of a second since the last
	time the NHDP processed was
	initialized."
	REFERENCE		REFERENCE
	"The NHDP draft."		"The NHDP draft."
	::= { nhdpNibLostNeighborSetEntry 1 }		::= { nhdpNibLostNeighborSetEntry 1 }
	--		--
	-- nhdpPerformanceObjGrp		-- nhdpPerformanceObjGrp
	--		--
	-- Contains objects which help to characterize the performance of		-- Contains objects which help to characterize the performance of
	-- the NHDP process, typically counters.		-- the NHDP process, typically counters.
	skipping to change at page 46, line 17		skipping to change at page 45, line 33
	::= { nhdpPerformanceObjGrp 2 }		::= { nhdpPerformanceObjGrp 2 }
	nhdpDiscIfSetPerfEntry OBJECT-TYPE		nhdpDiscIfSetPerfEntry OBJECT-TYPE
	SYNTAX NhdpDiscIfSetPerfEntry		SYNTAX NhdpDiscIfSetPerfEntry
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"There is an entry for each discovered		"There is an entry for each discovered
	interface of a neighbor."		interface of a neighbor."
	REFERENCE		REFERENCE
	"This NHDP-MIB draft."		"This document."
	INDEX { nhdpDiscIfSetIndex }		INDEX { nhdpDiscIfSetIndex }
	::= { nhdpDiscIfSetPerfTable 1 }		::= { nhdpDiscIfSetPerfTable 1 }
	NhdpDiscIfSetPerfEntry ::=		NhdpDiscIfSetPerfEntry ::=
	SEQUENCE {		SEQUENCE {
	nhdpDiscIfRecvdPackets		nhdpDiscIfRecvdPackets
	Counter32,		Counter32,
	nhdpDiscIfExpectedPackets		nhdpDiscIfExpectedPackets
	Counter32		Counter32
	}		}
	nhdpDiscIfRecvdPackets OBJECT-TYPE		nhdpDiscIfRecvdPackets OBJECT-TYPE
	SYNTAX Counter32		SYNTAX Counter32
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This counter increments each		"This counter increments each
	time this device receives a packet from that interface		time this router receives a packet from that interface
	of the neighbor."		of the neighbor."
	REFERENCE		REFERENCE
	"The NHDP draft."		"The NHDP draft."
	::= { nhdpDiscIfSetPerfEntry 1 }		::= { nhdpDiscIfSetPerfEntry 1 }
	nhdpDiscIfExpectedPackets OBJECT-TYPE		nhdpDiscIfExpectedPackets OBJECT-TYPE
	SYNTAX Counter32		SYNTAX Counter32
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This counter increments by the number		"This counter increments by the number
	of missed packets from this neighbor based		of missed packets from this neighbor based
	on the packet sequence number each time this		on the packet sequence number each time this
	device receives a packet from that interface		router receives a packet from that interface
	of the neighbor."		of the neighbor."
	REFERENCE		REFERENCE
	"The NHDP draft."		"The NHDP draft."
	::= { nhdpDiscIfSetPerfEntry 2 }		::= { nhdpDiscIfSetPerfEntry 2 }
	--		--
	-- Objects concerning the neighbor set		-- Objects concerning the neighbor set
	--		--
	nhdpNibNeighborSetChanges OBJECT-TYPE		nhdpNibNeighborSetChanges OBJECT-TYPE
	SYNTAX Counter32		SYNTAX Counter32
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This counter increments each time the Neighbor Set changes.		"This counter increments each time the Neighbor Set changes.
	A change occurs whenever a new Neighbor Tuple has been		A change occurs whenever a new Neighbor Tuple has been
	added, a Neighbor Tuple has been removed or any entry of		added, a Neighbor Tuple has been removed or any entry of
	a Neighbor Tuple has been modified."		a Neighbor Tuple has been modified."
	::= { nhdpPerformanceObjGrp 3 }		::= { nhdpPerformanceObjGrp 3 }
	--		--
	-- Objects per discovered neighbor		-- Objects per discovered neighbor
	--		--
	nhdpDiscNeighborSetPerfTable OBJECT-TYPE		nhdpDiscNeighborSetPerfTable OBJECT-TYPE
	SYNTAX SEQUENCE OF NhdpDiscNeighborSetPerfEntry		SYNTAX SEQUENCE OF NhdpDiscNeighborSetPerfEntry
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	skipping to change at page 47, line 40		skipping to change at page 47, line 15
	their properties."		their properties."
	REFERENCE		REFERENCE
	"The NHDP draft."		"The NHDP draft."
	::= { nhdpPerformanceObjGrp 4 }		::= { nhdpPerformanceObjGrp 4 }
	nhdpDiscNeighborSetPerfEntry OBJECT-TYPE		nhdpDiscNeighborSetPerfEntry OBJECT-TYPE
	SYNTAX NhdpDiscNeighborSetPerfEntry		SYNTAX NhdpDiscNeighborSetPerfEntry
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The entries include the nhdpDiscRouterId of		"The entries include performance
	the discovered router, as well as performance
	objects related to changes of the Neighbor		objects related to changes of the Neighbor
	Set."		Set."
	REFERENCE		REFERENCE
	"This NHDP-MIB draft."		"This document."
	INDEX { nhdpDiscIfSetRouterId }		INDEX { nhdpDiscIfSetRouterId }
	::= { nhdpDiscNeighborSetPerfTable 1 }		::= { nhdpDiscNeighborSetPerfTable 1 }
	NhdpDiscNeighborSetPerfEntry ::=		NhdpDiscNeighborSetPerfEntry ::=
	SEQUENCE {		SEQUENCE {
	nhdpDiscNeighborNibNeighborSetChanges		nhdpDiscNeighborNibNeighborSetChanges
	Counter32,		Counter32,
	nhdpDiscNeighborNibNeighborSetUpTime		nhdpDiscNeighborNibNeighborSetUpTime
	TimeTicks,		TimeTicks,
	nhdpDiscNeighborNibNeighborSetReachableLinkChanges		nhdpDiscNeighborNibNeighborSetReachableLinkChanges
	Counter32		Counter32
	}		}
	skipping to change at page 48, line 21		skipping to change at page 47, line 40
	Counter32		Counter32
	}		}
	nhdpDiscNeighborNibNeighborSetChanges OBJECT-TYPE		nhdpDiscNeighborNibNeighborSetChanges OBJECT-TYPE
	SYNTAX Counter32		SYNTAX Counter32
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This counter increments each time the neighbor becomes		"This counter increments each time the neighbor becomes
	onlink or offlink. A neighbor is said to become		onlink or offlink. A neighbor is said to become
	'onlink' if a new Neighbor Tuple is created that		'onlink' if a new nhdpNibNeighborSetEntry is created
	corresponds to the given neighbor. It becomes 'offlink'		for a particular nhdpNibNeighborSetRouterId. It becomes
	if such a tuple has been deleted."		'offlink' if the entry for that neighbor has been deleted."
	REFERENCE		REFERENCE
	"The NHDP draft."		"The NHDP draft."
	::= { nhdpDiscNeighborSetPerfEntry 1 }		::= { nhdpDiscNeighborSetPerfEntry 1 }
	nhdpDiscNeighborNibNeighborSetUpTime OBJECT-TYPE		nhdpDiscNeighborNibNeighborSetUpTime OBJECT-TYPE
	SYNTAX TimeTicks		SYNTAX TimeTicks
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This object returns the time in hundredths of a second since		"This object returns the time in hundredths of a second since
	the neighbor becomes 'onlink'. A neighbor is		the neighbor becomes 'onlink'. A neighbor is
	said to become 'onlink' if a new Neighbor Tuple is created that		said to become 'onlink' if a new nhdpNibNeighborSetEntry
	corresponds to the given neighbor. It becomes 'offlink' if		is created for a particular nhdpNibNeighborSetRouterId.
	such a tuple has been deleted."		It becomes 'offlink' if the entry for that neighbor
			has been deleted."
	REFERENCE		REFERENCE
	"This document."		"This document."
	::= { nhdpDiscNeighborSetPerfEntry 2 }		::= { nhdpDiscNeighborSetPerfEntry 2 }
	nhdpDiscNeighborNibNeighborSetReachableLinkChanges OBJECT-TYPE		nhdpDiscNeighborNibNeighborSetReachableLinkChanges OBJECT-TYPE
	SYNTAX Counter32		SYNTAX Counter32
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This counter increments each		"This counter increments each
	skipping to change at page 49, line 4		skipping to change at page 48, line 25
	nhdpDiscNeighborNibNeighborSetReachableLinkChanges OBJECT-TYPE		nhdpDiscNeighborNibNeighborSetReachableLinkChanges OBJECT-TYPE
	SYNTAX Counter32		SYNTAX Counter32
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This counter increments each		"This counter increments each
	time the neighbor changes the interface over which it is		time the neighbor changes the interface over which it is
	reachable. That means that the corresponding Link Tuple of the		reachable. That means that the corresponding Link Tuple of the
	given link moves from the Link Set of one interface to another		given link moves from the Link Set of one interface to another
	interface."		interface."
	REFERENCE		REFERENCE
	"The NHDP draft."		"The NHDP draft."
	::= { nhdpDiscNeighborSetPerfEntry 3 }		::= { nhdpDiscNeighborSetPerfEntry 3 }
	--		--
	-- Objects per discovered 2-hop neighbor		-- Objects per discovered 2-hop neighbor
	--		--
	nhdpIib2HopSetPerfTable OBJECT-TYPE		nhdpIib2HopSetPerfTable OBJECT-TYPE
	SYNTAX SEQUENCE OF NhdpIib2HopSetPerfEntry		SYNTAX SEQUENCE OF NhdpIib2HopSetPerfEntry
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This table contains performance objects per		"This table contains performance objects per
	discovered 2-hop neighbor."		discovered 2-hop neighbor."
	REFERENCE		REFERENCE
	"The NHDP draft."		"The NHDP draft."
	::= { nhdpPerformanceObjGrp 5 }		::= { nhdpPerformanceObjGrp 5 }
	nhdpIib2HopSetPerfEntry OBJECT-TYPE		nhdpIib2HopSetPerfEntry OBJECT-TYPE
	SYNTAX NhdpIib2HopSetPerfEntry		SYNTAX NhdpIib2HopSetPerfEntry
	MAX-ACCESS not-accessible		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The entries contain performance objects per		"The entries contain performance objects per
	discovered 2-hop neighbor."		discovered 2-hop neighbor."
	REFERENCE		REFERENCE
	"This NHDP-MIB draft."		"This document."
	INDEX { nhdpDiscIfSetRouterId }		INDEX { nhdpIib2HopSetIpAddress }
	::= { nhdpIib2HopSetPerfTable 1 }		::= { nhdpIib2HopSetPerfTable 1 }
	NhdpIib2HopSetPerfEntry ::=		NhdpIib2HopSetPerfEntry ::=
	SEQUENCE {		SEQUENCE {
	nhdpIib2HopSetPerfChanges		nhdpIib2HopSetPerfChanges
	Counter32,		Counter32,
	nhdpIib2HopSetPerfUpTime		nhdpIib2HopSetPerfUpTime
	TimeTicks		TimeTicks
	}		}
	nhdpIib2HopSetPerfChanges OBJECT-TYPE		nhdpIib2HopSetPerfChanges OBJECT-TYPE
	SYNTAX Counter32		SYNTAX Counter32
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This counter increments each		"This counter increments each
	time this 2-hop neighbor changes its		time this 2-hop neighbor changes its
	N2_neighbor_iface_addr_list in the		N2_neighbor_iface_addr_list in the
	nhdpIib2HopSetTable."		nhdpIib2HopSetTable."
	REFERENCE		REFERENCE
	"The NHDP draft."		"The NHDP draft."
	::= { nhdpIib2HopSetPerfEntry 1 }		::= { nhdpIib2HopSetPerfEntry 1 }
	nhdpIib2HopSetPerfUpTime OBJECT-TYPE		nhdpIib2HopSetPerfUpTime OBJECT-TYPE
	SYNTAX TimeTicks		SYNTAX TimeTicks
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"This object returns the time in hundredths of		"This object returns the time in hundredths of
	a second when the 2-Hop Tuple		a second when the 2-Hop Tuple
	corresponding to the given 2-hop		corresponding to the given 2-hop neighbor IP address
	neighbor IP address was registered in the		was registered in the nhdpIib2HopSetTable."
	nhdpIib2HopSetTable."
	REFERENCE		REFERENCE
	"This NHDP-MIB draft."		"This document."
	::= { nhdpIib2HopSetPerfEntry 2 }		::= { nhdpIib2HopSetPerfEntry 2 }
	--		--
	-- nhdpNotifications		-- nhdpNotifications
	--		--
	nhdpNotificationsControl OBJECT IDENTIFIER ::= { nhdpNotifications 1 }		nhdpNotificationsControl OBJECT IDENTIFIER ::= { nhdpNotifications 1 }
	nhdpNotificationsObjects OBJECT IDENTIFIER ::= { nhdpNotifications 2 }		nhdpNotificationsObjects OBJECT IDENTIFIER ::= { nhdpNotifications 2 }
	nhdpNotificationsStates OBJECT IDENTIFIER ::= { nhdpNotifications 3 }		nhdpNotificationsStates OBJECT IDENTIFIER ::= { nhdpNotifications 3 }
	-- nhdpNotificationsControl		-- nhdpNotificationsControl
	nhdpSetNotification OBJECT-TYPE		nhdpSetNotification OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(4))		SYNTAX OCTET STRING (SIZE(4))
	MAX-ACCESS read-write		MAX-ACCESS read-write
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"A 4-octet string serving as a bit map for		"A 4-octet string serving as a bit map for
	the notification events defined by the NHDP		the notification events defined by the NHDP
	notifications. This NHDP notifications where		notifications. This object is used to enable
	a 1 in the bit field represents enabled. The		and disable specific NHDP notifications where
	right-most bit (least significant) represents		a 1 in the bit field represents enabled. The
	notification 0.		right-most bit (least significant) represents
			notification 0.
	This object is persistent and when written		This object is persistent and when written
	the entity SHOULD save the change to		the entity SHOULD save the change to
	non-volatile storage."		non-volatile storage.
	::= { nhdpNotificationsControl 1 }		"
	nhdpMessageSrcType OBJECT-TYPE		::= { nhdpNotificationsControl 1 }
	SYNTAX InetAddressType
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"The IP address type of the
	address of an inbound message that
	cannot be identified by a neighbor instance."
	::= { nhdpNotificationsControl 2 }
	nhdpMessageSrc OBJECT-TYPE		nhdpPacketSrcType OBJECT-TYPE
	SYNTAX InetAddress		SYNTAX InetAddressType
	MAX-ACCESS read-only		MAX-ACCESS not-accessible
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The IP address of an inbound message that		"The IP address type of the
	cannot be identified by a neighbor instance. When		address of an inbound packet that
	the last value of a notification using this object is		cannot be identified by a neighbor instance."
	needed, but no notifications of that type have been sent,		::= { nhdpNotificationsControl 2 }
	this value pertaining to this object should
	be returned as 0.0.0.0 or :: respectively."		nhdpPacketSrc OBJECT-TYPE
	::= { nhdpNotificationsControl 3 }		SYNTAX InetAddress
			MAX-ACCESS read-only
			STATUS current
			DESCRIPTION
			"The IP address of an inbound packet that
			cannot be identified by a neighbor instance. When
			the last value of a notification using this object is
			needed, but no notifications of that type have been sent,
			this value pertaining to this object should
			be returned as 0.0.0.0 or :: respectively."
			::= { nhdpNotificationsControl 3 }
	-- nhdpNotificationsObjects		-- nhdpNotificationsObjects
	nhdpNbrStateChange NOTIFICATION-TYPE		nhdpNbrStateChange NOTIFICATION-TYPE
	OBJECTS { nhdpDiscIfSetRouterId, -- The originator		OBJECTS { nhdpDiscIfSetRouterId, -- The originator of
	nhdpNbrState -- The new state		-- the notification.
	}		nhdpNbrState -- The new state
	STATUS current		}
	DESCRIPTION		STATUS current
	"An nhdpNbrStateChange notification signifies that		DESCRIPTION
	there has been a change in the state of a		"nhdpNbrStateChange is a notification sent when a
	NHDP neighbor."		significant number of neighbors change their status
	::= { nhdpNotificationsObjects 1 }		(i.e. down, asymmetric, or symmetric) in a short
			time. The network administrator should select
	nhdp2hopNbrStateChange NOTIFICATION-TYPE		appropriate values for 'significant number of
	OBJECTS { nhdpDiscIfSetRouterId, -- The originator		neighbors' and 'short time'."
	nhdp2hopNbrState -- The new state		::= { nhdpNotificationsObjects 1 }
	}
	STATUS current
	DESCRIPTION
	"An nhdp2hopNbrStateChange notification signifies that
	there has been a change in the state of a 2-hop
	neighbor. This notification should be
	generated when the 2-hop neighbor state goes
	down or up."
	::= { nhdpNotificationsObjects 2 }		nhdp2hopNbrStateChange NOTIFICATION-TYPE
			OBJECTS { nhdpIib2HopSetIpAddress, -- The originator
			-- of the notification
			nhdp2hopNbrState -- The new state
			}
			STATUS current
			DESCRIPTION
			"nhdp2hopNbrStateChange is a notification sent
			when a significant number of 2-hop neighbors
			change their status (i.e. up or down) in a short
			time. The network administrator should select
			appropriate values for 'significant number of
			neighbors' and 'short time'."
			::= { nhdpNotificationsObjects 2 }
	nhdpIfRxBadMessage NOTIFICATION-TYPE		nhdpIfRxBadPacket NOTIFICATION-TYPE
	OBJECTS { nhdpDiscIfSetRouterId, -- The originator of		OBJECTS { nhdpDiscIfSetRouterId, -- The originator of
	nhdpDiscIfSetIndex, -- The interface		-- the notification
	nhdpMessageSrcType, -- The source IP addrType		nhdpDiscIfSetIndex, -- The interface on which the
	nhdpMessageSrc -- The source IP address		-- packet has been received
	}		nhdpPacketSrcType -- The type of the source IP address
	STATUS current		-- of the packet
	DESCRIPTION		nhdpPacketSrc -- The source IP address of the packet
	"An nhdpIfRxBadMessage notification signifies that a		}
	HELLO message has been received on an		STATUS current
	interface that cannot be parsed."		DESCRIPTION
	::= { nhdpNotificationsObjects 3 }		"nhdpIfRxBadPacket is a notification sent when a
			significant number of incoming packets have not
			been succesfully parsed in a short time. The
			etwork administrator should select appropriate
			values for 'significant number of neighbors'
			and 'short time'."
			::= { nhdpNotificationsObjects 3 }
	nhdpIfStateChange NOTIFICATION-TYPE		nhdpIfStateChange NOTIFICATION-TYPE
	OBJECTS { nhdpIfIndex, -- The local interface		OBJECTS { nhdpIfIndex, -- The local interface
	nhdpIfState -- The new state		nhdpIfState -- The new state
	}		}
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"An nhdpIfStateChange notification signifies that there		"nhdpIfStateChange is a notification sent when
	has been a change in the state of an NHDP		the status of an interface of this router has
	interface. This notification should be generated		changed (i.e. an IP address has been added or
	when the interface goes up or down, or when		removed to the interface, or the interface has
	the list of addresses of that interface		changed its status from up to down or vice versa)."
	changes."		::= { nhdpNotificationsObjects 4 }
	::= { nhdpNotificationsObjects 4 }
	-- nhdpNotificationStates		-- nhdpNotificationStates
	nhdpNbrState OBJECT-TYPE
	SYNTAX INTEGER {		nhdpNbrState OBJECT-TYPE
			SYNTAX INTEGER {
	down (0),		down (0),
	asymmetric (1),		asymmetric (1),
	symmetric(2)		symmetric(2)
	}		}
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"NHDP neighbor states."		"NHDP neighbor states."
	DEFVAL { down }		DEFVAL { down }
	::= { nhdpNotificationsStates 1 }		::= { nhdpNotificationsStates 1 }
	nhdp2hopNbrState OBJECT-TYPE		nhdp2hopNbrState OBJECT-TYPE
	SYNTAX INTEGER {		SYNTAX INTEGER {
	down (0),		down (0),
	up (1)		up (1)
	}		}
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"NHDP 2hop neighbor states."		"NHDP 2hop neighbor states."
	DEFVAL { down }		DEFVAL { down }
	::= { nhdpNotificationsStates 2 }		::= { nhdpNotificationsStates 2 }
	nhdpIfState OBJECT-TYPE		nhdpIfState OBJECT-TYPE
	SYNTAX INTEGER {		SYNTAX INTEGER {
	down (0),		down (0),
	up (1),		up (1),
	addresschange(2) -- If a new address has been		addresschange(2) -- If a new address has been
	-- added or an address has		-- added or an address has
	-- been removed		-- been removed
	}		}
	MAX-ACCESS read-only		MAX-ACCESS read-only
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"NHDP interface states."		"NHDP interface states."
	DEFVAL { down }		DEFVAL { down }
	::= { nhdpNotificationsStates 3 }		::= { nhdpNotificationsStates 3 }
	--		--
	-- nhdpConformance information		-- nhdpConformance information
	--		--
	nhdpCompliances OBJECT IDENTIFIER ::= { nhdpConformance 1 }		nhdpCompliances OBJECT IDENTIFIER ::= { nhdpConformance 1 }
	nhdpMIBGroups OBJECT IDENTIFIER ::= { nhdpConformance 2 }		nhdpMIBGroups OBJECT IDENTIFIER ::= { nhdpConformance 2 }
	-- Compliance Statements		-- Compliance Statements
	nhdpBasicCompliance MODULE-COMPLIANCE		nhdpBasicCompliance MODULE-COMPLIANCE
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The basic implementation requirements for		"The basic implementation requirements for
	managed network entities that implement		managed network entities that implement
	NHDP."		NHDP."
	MODULE -- this module		MODULE -- this module
	MANDATORY-GROUPS { nhdpConfigurationGroup }
	::= { nhdpCompliances 1 }		MANDATORY-GROUPS { nhdpConfigurationGroup }
			::= { nhdpCompliances 1 }
	nhdpFullCompliance MODULE-COMPLIANCE		nhdpFullCompliance MODULE-COMPLIANCE
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"The full implementation requirements for		"The full implementation requirements for
	managed network entities that implement		managed network entities that implement
	NHDP."		NHDP."
	MODULE -- this module		MODULE -- this module
	MANDATORY-GROUPS { nhdpConfigurationGroup,		MANDATORY-GROUPS { nhdpConfigurationGroup,
	nhdpStateGroup,		nhdpStateGroup,
	nhdpPerformanceGroup,		nhdpPerformanceGroup,
	nhdpNotificationObjectGroup,		nhdpNotificationObjectGroup,
	nhdpNotificationGroup }		nhdpNotificationGroup }
	::= { nhdpCompliances 2 }
			::= { nhdpCompliances 2 }
	--		--
	-- Units of Conformance		-- Units of Conformance
	--		--
	nhdpConfigurationGroup OBJECT-GROUP
	OBJECTS {		nhdpConfigurationGroup OBJECT-GROUP
			OBJECTS {
	nhdpIfIndex,		nhdpIfIndex,
	nhdpIfStatus,		nhdpIfStatus,
	nhdpHelloInterval,		nhdpHelloInterval,
	nhdpHelloMinInterval,		nhdpHelloMinInterval,
	nhdpRefreshInterval,		nhdpRefreshInterval,
	nhdpLHoldTime,		nhdpLHoldTime,
	nhdpHHoldTime,		nhdpHHoldTime,
	nhdpHystAcceptQuality,		nhdpHystAcceptQuality,
	nhdpHystRejectQuality,		nhdpHystRejectQuality,
	nhdpInitialQuality,		nhdpInitialQuality,
	nhdpInitialPending,		nhdpInitialPending,
	nhdpHpMaxJitter,		nhdpHpMaxJitter,
	nhdpHtMaxJitter,		nhdpHtMaxJitter,
	nhdpNHoldTime,		nhdpNHoldTime,
	nhdpIHoldTime,		nhdpIHoldTime,
	nhdpIfRowStatus		nhdpIfRowStatus
	}		}
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"Set of NHDP configuration objects implemented		"Set of NHDP configuration objects implemented
	in this module."		in this module."
	::= { nhdpMIBGroups 2 }		::= { nhdpMIBGroups 2 }
	nhdpStateGroup OBJECT-GROUP		nhdpStateGroup OBJECT-GROUP
	OBJECTS {		OBJECTS {
	nhdpUpTime,		nhdpUpTime,
	nhdpDiscIfSetRouterId,		nhdpDiscIfSetRouterId,
	nhdpDiscIfSetIndex,		nhdpDiscIfSetIndex,
	nhdpDiscIfSetIpAddrPrefixLen,		nhdpDiscIfSetIpAddrPrefixLen,
	nhdpLibRemovedIfAddrSetIpAddrPrefixLen,		nhdpLibRemovedIfAddrSetIpAddrPrefixLen,
	nhdpLibRemovedIfAddrSetIfIndex,		nhdpLibRemovedIfAddrSetIfIndex,
	nhdpLibRemovedIfAddrSetIrTime,		nhdpLibRemovedIfAddrSetIrTime,
	nhdpIibLinkSetLHeardTime,		nhdpIibLinkSetLHeardTime,
	nhdpIibLinkSetLSymTime,		nhdpIibLinkSetLSymTime,
	nhdpIibLinkSetLQuality,
	nhdpIibLinkSetLPending,		nhdpIibLinkSetLPending,
	nhdpIibLinkSetLLost,		nhdpIibLinkSetLLost,
	nhdpIibLinkSetLTime,		nhdpIibLinkSetLTime,
	nhdpIib2HopSet1HopIfIndex,		nhdpIib2HopSet1HopIfIndex,
	nhdpIib2HopSetN2Time,		nhdpIib2HopSetN2Time,
	nhdpNibNeighborSetNSymmetric,		nhdpNibNeighborSetNSymmetric,
	nhdpNibLostNeighborSetNLTime		nhdpNibLostNeighborSetNLTime
	}		}
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"Set of NHDP state objects implemented		"Set of NHDP state objects implemented
	in this module."		in this module."
	::= { nhdpMIBGroups 3 }		::= { nhdpMIBGroups 3 }
	nhdpPerformanceGroup OBJECT-GROUP		nhdpPerformanceGroup OBJECT-GROUP
	OBJECTS {		OBJECTS {
	nhdpIfHelloMessageXmits,		nhdpIfHelloMessageXmits,
	nhdpIfHelloMessageRecvd,		nhdpIfHelloMessageRecvd,
	nhdpIfHelloMessageXmitAccumulatedSize,		nhdpIfHelloMessageXmitAccumulatedSize,
	nhdpIfHelloMessageRecvdAccumulatedSize,		nhdpIfHelloMessageRecvdAccumulatedSize,
	nhdpIfHelloMessageTriggeredXmits,		nhdpIfHelloMessageTriggeredXmits,
	nhdpIfHelloMessagePeriodicXmits,		nhdpIfHelloMessagePeriodicXmits,
	nhdpIfHelloMessageXmitAccumulatedSymmetricNeighborCount,		nhdpIfHelloMessageXmitAccumulatedSymmetricNeighborCount,
	nhdpIfHelloMessageXmitAccumulatedHeardNeighborCount,		nhdpIfHelloMessageXmitAccumulatedHeardNeighborCount,
	nhdpIfHelloMessageXmitAccumulatedLostNeighborCount,		nhdpIfHelloMessageXmitAccumulatedLostNeighborCount,
	nhdpDiscIfRecvdPackets,		nhdpDiscIfRecvdPackets,
	nhdpDiscIfExpectedPackets,		nhdpDiscIfExpectedPackets,
	nhdpNibNeighborSetChanges,		nhdpNibNeighborSetChanges,
	nhdpDiscNeighborNibNeighborSetChanges,		nhdpDiscNeighborNibNeighborSetChanges,
	nhdpDiscNeighborNibNeighborSetUpTime,		nhdpDiscNeighborNibNeighborSetUpTime,
	nhdpDiscNeighborNibNeighborSetReachableLinkChanges,		nhdpDiscNeighborNibNeighborSetReachableLinkChanges,
	nhdpIib2HopSetPerfChanges,		nhdpIib2HopSetPerfChanges,
	nhdpIib2HopSetPerfUpTime		nhdpIib2HopSetPerfUpTime
	}		}
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"Set of NHDP performance objects implemented		"Set of NHDP performance objects implemented
	in this module."		in this module."
	::= { nhdpMIBGroups 4 }		::= { nhdpMIBGroups 4 }
	nhdpNotificationObjectGroup OBJECT-GROUP		nhdpNotificationObjectGroup OBJECT-GROUP
	OBJECTS {		OBJECTS {
	nhdpSetNotification,		nhdpSetNotification,
	nhdpMessageSrcType,		nhdpPacketSrc,
	nhdpMessageSrc,		nhdpIfState,
	nhdpIfState,		nhdpNbrState,
	nhdpNbrState,		nhdp2hopNbrState
	nhdp2hopNbrState
	}		}
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"Set of NHDP notification objects implemented		"Set of NHDP notification objects implemented
	in this module."		in this module."
	::= { nhdpMIBGroups 5 }		::= { nhdpMIBGroups 5 }
	nhdpNotificationGroup NOTIFICATION-GROUP		nhdpNotificationGroup NOTIFICATION-GROUP
	NOTIFICATIONS {		NOTIFICATIONS {
	nhdpNbrStateChange,		nhdpNbrStateChange,
	nhdp2hopNbrStateChange,		nhdp2hopNbrStateChange,
	nhdpIfRxBadMessage,		nhdpIfRxBadPacket,
	nhdpIfStateChange		nhdpIfStateChange
	}		}
	STATUS current		STATUS current
	DESCRIPTION		DESCRIPTION
	"Set of NHDP notifications implemented		"Set of NHDP notifications implemented
	in this module."		in this module."
	::= { nhdpMIBGroups 6 }		::= { nhdpMIBGroups 6 }
	END		END
	5.7. Security Considerations		8. Security Considerations
	This MIB defines objects for the configuration, monitoring and		This MIB defines objects for the configuration, monitoring and
	notification of the Neighborhood Discovery Protocol (NHDP) [NHDP].		notification of the Neighborhood Discovery Protocol [NHDP]. NHDP
	NHDP allows routers to acquire topological information up to two hops		allows routers to acquire topological information up to two hops away
	away by virtue of exchanging HELLO messages. The information		by virtue of exchanging HELLO messages. The information acquired by
	acquired by NHDP is used by other protocols, such as OLSRv2 [OLSRv2]		NHDP may be used by routing protocols. The neighborhood information,
	and SMF [SMF], and possibly other protocols. The neighborhood		exchanged between routers using NHDP, serves these routing protocols
	information, exchanged between routers using NHDP, serves these		as a baseline for calculating paths to all destinations in the MANET,
	routing protocols as a baseline for calculating paths to all		relay set selection for network-wide transmissions etc.
	destinations in the MANET, relay set selection for network-wide
	transmissions etc.
	There are a number of management objects defined in this MIB module		There are a number of management objects defined in this MIB module
	with a MAX-ACCESS clause of read-write and/or read-create. Such		with a MAX-ACCESS clause of read-write and/or read-create. Such
	objects may be considered sensitive or vulnerable in some network		objects may be considered sensitive or vulnerable in some network
	environments. The support for SET operations in a non-secure		environments. The support for SET operations in a non-secure
	environment without proper protection can have a negative effect on		environment without proper protection can have a negative effect on
	network operations. These are the tables and objects and their		network operations. These are the tables and objects and their
	sensitivity/vulnerability:		sensitivity/vulnerability:
	o Specifically sensitive objects -
	o nhdpIfStatus - this writable object turns on or off the NHDP		o nhdpIfStatus - this writable object turns on or off the NHDP
	process for the specified interface. If disabled, higher level		process for the specified interface. If disabled, higher level
	protocol functions, e.g., routing, would fail causing network-wide		protocol functions, e.g., routing, would fail causing network-wide
	disruptions.		disruptions.
	o nhdpHelloInterval, nhdpHelloMinInterval, and nhdpRefreshInterval -		o nhdpHelloInterval, nhdpHelloMinInterval, and nhdpRefreshInterval -
	these writable objects control the rate at which HELLO messages		these writable objects control the rate at which HELLO messages
	are sent on a wireless interface. If set at too high a rate, this		are sent on a wireless interface. If set at too high a rate, this
	could represent a form of DOS attack by overloading interface		could represent a form of DOS attack by overloading interface
	resources.		resources.
	o nhdpHystAcceptQuality, nhdpHystRejectQuality, nhdpInitialQuality,		o nhdpHystAcceptQuality, nhdpHystRejectQuality, nhdpInitialQuality,
	nhdpInitialPending - these writable objects affect the perceived		nhdpInitialPending - these writable objects affect the perceived
	quality of the NHDP links and hence the overall stability of the		quality of the HNDP links and hence the overall stability of the
	network. If improperly set, these settings could result in		network. If improperly set, these settings could result in
	network-wide disruptions.		network-wide disruptions.
	o nhdpInterfaceTable - this table contains writable objects that		o nhdpInterfaceTable - this table contains writable objects that
	affect the overall performance and stability of the NHDP process.		affect the overall performance and stability of the NHDP process.
	Failure of the NHDP process would result in network-wide failure.		Failure of the NHDP process would result in network-wide failure.
	Particularly sensitive objects from this table are discussed in		Particularly sensitive objects from this table are discussed in
	the previous list items. This is the only table in the NHDP-MIB		the previous list items. This is the only table in the NHDP-MIB
	with writable objects.		with writable objects.
	Some of the readable objects in this MIB module (i.e., objects with a		Some of the readable objects in this MIB module (i.e., objects with a
	MAX-ACCESS other than not-accessible) may be considered sensitive or		MAX-ACCESS other than not-accessible) may be considered sensitive or
	vulnerable in some network environments. It is thus important to		vulnerable in some network environments. It is thus important to
	control even GET and/or NOTIFY access to these objects and possibly		control even GET and/or NOTIFY access to these objects and possibly
	to even encrypt the values of these objects when sending them over		to even encrypt the values of these objects when sending them over
	the network via SNMP. These are the tables and objects and their		the network via SNMP. These are the tables and objects and their
	sensitivity/vulnerability:		sensitivity/vulnerability:
	o nhdpDiscIfSetTable - The contains information on discovered		o nhdpDiscIfSetTable - The contains information on discovered
	neighbors, specifically their IP address in the		neighbors,specifically their IP address in the nhdpDiscIfSetIpAddr
	nhdpDiscIfSetIpAddr object. This information provides an		object. This information provides an adversary broad information
	adversary broad information on the members of the MANET, located		on the members of the MANET, located within this single table.
	within this single table. This information can be use to expedite		This information can be use to expedite attacks on the other
	attacks on the other members of the MANET without having to go		members of the MANET without having to go through a laborious
	through a laborious discovery process on their own. This object		discovery process on their own. This object is the index into the
	is the index into the table, and has a MAX-ACCESS of 'not-		table, and has a MAX-ACCESS of 'not-accessible'. However, this
	accessible'. However this information can be exposed using SNMP		information can be exposed using SNMP operations.
	operations.
	MANET technology is often deployed to support communications of		MANET technology is often deployed to support communications of
	emergency services or military tactical applications. In these		emergency services or military tactical applications. In these
	applications, it is imperative to maintain the proper operation of		applications, it is imperative to maintain the proper operation of
	the communications network and to protect sensitive information		the communications network and to protect sensitive information
	related to its operation. Therefore, when implementing these		related to its operation. Therefore, when implementing these
	capabilities, the full use of SNMPv3 cryptographic mechanisms for		capabilities, the full use of SNMPv3 cryptographic mechanisms for
	authentication and privacy is RECOMMENDED.		authentication and privacy is RECOMMENDED.
	SNMP versions prior to SNMPv3 did not include adequate security.		SNMP versions prior to SNMPv3 did not include adequate security.
	skipping to change at page 58, line 30		skipping to change at page 58, line 20
	authentication and privacy).		authentication and privacy).
	Further, deployment of SNMP versions prior to SNMPv3 is NOT		Further, deployment of SNMP versions prior to SNMPv3 is NOT
	RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to		RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to
	enable cryptographic security. It is then a customer/operator		enable cryptographic security. It is then a customer/operator
	responsibility to ensure that the SNMP entity giving access to an		responsibility to ensure that the SNMP entity giving access to an
	instance of this MIB module is properly configured to give access to		instance of this MIB module is properly configured to give access to
	the objects only to those principals (users) that have legitimate		the objects only to those principals (users) that have legitimate
	rights to indeed GET or SET (change/create/delete) them.		rights to indeed GET or SET (change/create/delete) them.
	5.8. IANA Considerations		9. IANA Considerations
	Editor's Note (to be removed prior to publication): the IANA is		Editor's Note (to be removed prior to publication): the IANA is
	requested to assign a value for "XXXX" under the 'mib-2' subtree and		requested to assign a value for "XXXX" under the 'mib-2' subtree and
	to record the assignment in the SMI Numbers registry. When the		to record the assignment in the SMI Numbers registry. When the
	assignment has been made, the RFC Editor is asked to replace "XXXX"		assignment has been made, the RFC Editor is asked to replace "XXXX"
	(here and in the MIB module) with the assigned value and to remove		(here and in the MIB module) with the assigned value and to remove
	this note.		this note. Note well: prior to official assignment by the IANA, a
			draft document MUST use placeholders (such as "XXXX" above) rather
	Note well: prior to official assignment by the IANA, a draft document		than actual numbers. See RFC4181 Section 4.5 for an example of how
	MUST use placeholders (such as "XXXX" above) rather than actual		this is done in a draft MIB module.
	numbers. See RFC4181 Section 4.5 for an example of how this is done
	in a draft MIB module.
	5.9. Contributors		10. Contributors
	This MIB document uses the template authored by D. Harrington which		This MIB document uses the template authored by D. Harrington which
	is based on contributions from the MIB Doctors, especially Juergen		is based on contributions from the MIB Doctors, especially Juergen
	Schoenwaelder, Dave Perkins, C.M.Heard and Randy Presuhn.		Schoenwaelder, Dave Perkins, C.M.Heard and Randy Presuhn.
	6. References		11. References
	6.1. Normative References
			11.1. Normative References
	[RFC2863] McCloghrie, K. and F. Kastenholz, "The Interfaces Group		[RFC2863] McCloghrie, K. and F. Kastenholz, "The Interfaces Group
	MIB", RFC 2863, June 2000.		MIB", RFC 2863, June 2000.
	[RFC3418] Presuhn, R., "Management Information Base (MIB) for the		[RFC3418] Presuhn, R., "Management Information Base (MIB) for the
	Simple Network Management Protocol (SNMP)", STD 62,		Simple Network Management Protocol (SNMP)", STD 62,
	RFC 3418, December 2002.		RFC 3418, December 2002.
	[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate		[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
	Requirement Levels", BCP 14, RFC 2119, March 1997.		Requirement Levels", BCP 14, RFC 2119, March 1997.
	skipping to change at page 59, line 28		skipping to change at page 59, line 17
	Version 2 (SMIv2)", STD 58, RFC 2578, April 1999.		Version 2 (SMIv2)", STD 58, RFC 2578, April 1999.
	[RFC2579] McCloghrie, K., Ed., Perkins, D., Ed., and J.		[RFC2579] McCloghrie, K., Ed., Perkins, D., Ed., and J.
	Schoenwaelder, Ed., "Textual Conventions for SMIv2",		Schoenwaelder, Ed., "Textual Conventions for SMIv2",
	STD 58, RFC 2579, April 1999.		STD 58, RFC 2579, April 1999.
	[RFC2580] McCloghrie, K., Perkins, D., and J. Schoenwaelder,		[RFC2580] McCloghrie, K., Perkins, D., and J. Schoenwaelder,
	"Conformance Statements for SMIv2", STD 58, RFC 2580,		"Conformance Statements for SMIv2", STD 58, RFC 2580,
	April 1999.		April 1999.
	[NHDP] Clausen, T., Dearlove, C., and J. Dean, "The MANET		[NHDP] Clausen, T., Dearlove, C., and J. Dean, "Mobile Ad Hoc
	Neighborhood Discovery Protocol (NHDP)",		Network (MANET) Neighborhood Discovery Protocol (NHDP)",
	draft-ietf-manet-nhdp-11 (work in progress), October 2009.		draft-ietf-manet-nhdp-14 (work in progress), July 2010.
	[RFC4001] Daniele, M., Haberman, B., Routhier, S., and J.		[RFC4001] Daniele, M., Haberman, B., Routhier, S., and J.
	Schoenwaelder, "Textual Conventions for Internet Network		Schoenwaelder, "Textual Conventions for Internet Network
	Addresses", RFC 4001, February 2005.		Addresses", RFC 4001, February 2005.
	6.2. Informative References		11.2. Informative References
	[REPORT] Cole, R., Macker, J., and A. Morton, "Definition of		[REPORT] Cole, R., Macker, J., and A. Morton, "Definition of
	Managed Objects for Performance Reporting",		Managed Objects for Performance Reporting",
	draft-cole-manet-report-mib-02 (work in progress),		draft-ietf-manet-report-mib-00 (work in progress),
	March 2010.		July 2010.
	[RFC5148] Clausen, T., Dearlove, C., and B. Adamson, "Jitter
	Considerations in Mobile Ad Hoc Networks (MANETs)",
	RFC 5148, February 2008.
	[OLSRv2] Clausen, T., Dearlove, C., and P. Philippe, "The Optimized
	Link State Routing Protocol version 2", work in
	progress draft-ietf-manet-olsrv2-10.txt, September 2009.
	[SMF] Macker, J., "Simplified Multicast Forwarding", work in		[RFC4750] Joyal, D., Galecki, P., Giacalone, S., Coltun, R., and F.
	progress draft-ietf-manet-smf-09.txt, July 2009.		Baker, "OSPF Version 2 Management Information Base",
			RFC 4750, December 2006.
	[RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart,		[RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart,
	"Introduction and Applicability Statements for Internet-		"Introduction and Applicability Statements for Internet-
	Standard Management Framework", RFC 3410, December 2002.		Standard Management Framework", RFC 3410, December 2002.
	[RFC3781] Strauss, F. and J. Schoenwaelder, "Next Generation		[RFC3781] Strauss, F. and J. Schoenwaelder, "Next Generation
	Structure of Management Information (SMIng) Mappings to		Structure of Management Information (SMIng) Mappings to
	the Simple Network Management Protocol (SNMP)", RFC 3781,		the Simple Network Management Protocol (SNMP)", RFC 3781,
	May 2004.		May 2004.
	Appendix A. Change Log		Appendix A.
	Here we list the changes made to the various drafts of this MIB.
	We list here the changes made on the draft-ietf-manet-nhdp-mib-04
	draft to generate the draft-ietf-manet-nhdp-mib-05 draft.
	1. Cleaned up the time objects within the MIB using the TimeTicks
	Textual Convention.
	2. Changed the definition of the
	'nhdpDiscNeighborNibNeighborSetUpTime' object to track only the
	entry uptime, since the time since 'down' referred to a removed
	tuple.
	We list here the changes made on the draft-ietf-manet-nhdp-mib-03
	draft to generate the draft-ietf-manet-nhdp-mib-04 draft.
	1. Cleaned up and condensed text in the front material to this
	draft. Specifically, shortened the Configuration and State Group
	sections, deferring to the MIB as definitive. Left the
	Performance Group discussion primarily intact due to its
	discussion of base and derived performance objects and statistics
	and their value to management and operations of NHDP.
	2. Added information identifying objects requiring non-volatile
	storage within the DESCRIPTION clause of the objects within the
	NHDP-MIB.
	3.
	We list here the changes made on the draft-ietf-manet-nhdp-mib-02
	draft to generate the draft-ietf-manet-nhdp-mib-03 draft.
	1. Cleaned up text in the Performance Group section defining the
	base versus the derived (from the REPORT-MIB) objects.
	2. Added the local nhdpIfIndex to the nhdpIibLinkSetTable. A duplex
	of interface indexes is required to define a wireless link.
	3. Added text to the Security Considerations section.
	4. Added notifications.
	We list here the changes made on the draft-ietf-manet-nhdp-mib-01
	draft to generate the draft-ietf-manet-nhdp-mib-02 draft.
	1. Cleaned up several things (e.g. moved N_HOLD_TIME from interface
	parameter to router parameter)
	2. Updated to NHDP draft version 11
	We list here the changes made on the draft-ietf-manet-nhdp-mib-00
	draft to generate the draft-ietf-manet-nhdp-mib-01 draft.
	1. Made and extensive addition in the area of performance
	monitoring. Added text in the front material, added a
	PerformanceGroup to the MIB and added the PerformanceGroup to the
	Conformance Sections.
	We list here the changes made on the draft-cole-manet-nhdp-mib-01
	draft to generate the draft-ietf-manet-nhdp-mib-00 draft.
	1. Cleanup up numerous typos and add material to the Conformance
	section in order to pass the MIB checker, i.e., smilint.
	We list here the changes made on the draft-cole-manet-nhdp-mib-00
	draft to generate the draft-cole-manet-nhdp-mib-01 draft.
	1. Defined the NeighborIfIndex and the NeighborRouterId textual
	conventions. These identify a remote neighbor IfIndex and a
	remote neighbor router and are used as indexes into NHDP state
	tables. These constructs were necessary in order to associate
	address lists with specific remote interfaces as required by the
	NHDP protocol specification.
	2. Developed the nhdpInterfaceTable as part of the configuration
	group.
	3. Developed the nhdpDiscIfSetTable as a means to associate address
	lists with remotely discovered neighbor interfaces.
	4. Added tables defining the router's NHDP Local Information Base
	(LIB) as specified in the NHDP protocol specification.
	5. Added tables defining the router's NHDP Interface information
	Base (IIB) as specified in the NHDP protocol specification.
	6. Added tables defining the router's NHDP Neighbor Information Base
	(NIB) as specified in the NHDP protocol specification.
	7. Aligned the NHDP-MIB and the OLSRv2-MIB configuration tables and
	indexing.
	Appendix B.
	***************************************************************		***************************************************************
	* Note to the RFC Editor (to be removed prior to publication) *		* Note to the RFC Editor (to be removed prior to publication) *
	* *		* *
	* 1) The reference to RFCXXXX within the DESCRIPTION clauses *		* 1) The reference to RFCXXXX within the DESCRIPTION clauses *
	* of the MIB module point to this draft and are to be *		* of the MIB module point to this draft and are to be *
	* assigned by the RFC Editor. *		* assigned by the RFC Editor. *
	* *		* *
			* 2) The reference to RFCXXX2 throughout this document point *
			* to the current draft-ietf-manet-nhdp-mib-xx.txt. This *
			* need to be replaced with the XXX RFC number. *
			* *
	***************************************************************		***************************************************************
	Authors' Addresses		Authors' Addresses
	Ulrich Herberg		Ulrich Herberg
	LIX, Ecole Polytechnique		LIX, Ecole Polytechnique
	Palaiseau Cedex, 91128		Palaiseau Cedex, 91128
	France		France
	EMail: ulrich@herberg.name		EMail: ulrich@herberg.name
End of changes. 259 change blocks.
	898 lines changed or deleted		766 lines changed or added
This html diff was produced by rfcdiff 1.40. The latest version is available from http://tools.ietf.org/tools/rfcdiff/