draft-ietf-lisp-mib-08.txt   draft-ietf-lisp-mib-09.txt 
Network Working Group G. Schudel Network Working Group G. Schudel
Internet-Draft A. Jain Internet-Draft A. Jain
Intended status: Experimental V. Moreno Intended status: Experimental V. Moreno
Expires: July 8, 2013 cisco Systems Expires: August 8, 2013 cisco Systems
January 4, 2013 February 4, 2013
LISP MIB LISP MIB
draft-ietf-lisp-mib-08 draft-ietf-lisp-mib-09
Abstract Abstract
This document defines managed objects for the Locator/ID Separation This document defines managed objects for the Locator/ID Separation
Protocol (LISP). These objects provide information useful for Protocol (LISP). These objects provide information useful for
monitoring LISP devices, including basic configuration information, monitoring LISP devices, including basic configuration information,
LISP status, and operational statistics. LISP status, and operational statistics.
Status of This Memo Status of This Memo
skipping to change at page 1, line 34 skipping to change at page 1, line 34
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet- working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/. Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress." material or to cite them other than as "work in progress."
This Internet-Draft will expire on July 8, 2013. This Internet-Draft will expire on August 8, 2013.
Copyright Notice Copyright Notice
Copyright (c) 2013 IETF Trust and the persons identified as the Copyright (c) 2013 IETF Trust and the persons identified as the
document authors. All rights reserved. document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of (http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents publication of this document. Please review these documents
skipping to change at page 3, line 19 skipping to change at page 3, line 19
"OPTIONAL" in this document are to be interpreted as described in "OPTIONAL" in this document are to be interpreted as described in
[RFC2119]. [RFC2119].
2. Introduction 2. Introduction
This draft describes the Management Information Base (MIB) module for This draft describes the Management Information Base (MIB) module for
use with network management protocols in the Internet community. use with network management protocols in the Internet community.
Specifically, the MIB for managing Locator/ID Separation Protocol Specifically, the MIB for managing Locator/ID Separation Protocol
(LISP) devices is described. (LISP) devices is described.
LISP [LISP] specifies a network-based architecture and mechanisms LISP [RFC6830] specifies a network-based architecture and mechanisms
that implement a new semantic for IP addressing using two separate that implement a new semantic for IP addressing using two separate
name spaces: Endpoint Identifiers (EIDs), used within sites, and name spaces: Endpoint Identifiers (EIDs), used within sites, and
Routing Locators (RLOCs), used on the transit networks that make up Routing Locators (RLOCs), used on the transit networks that make up
the Internet infrastructure. To achieve this separation, LISP the Internet infrastructure. To achieve this separation, LISP
defines protocol mechanisms for mapping from EIDs to RLOCs. defines protocol mechanisms for mapping from EIDs to RLOCs.
From a data plane perspective, LISP traffic is handled exclusively at From a data plane perspective, LISP traffic is handled exclusively at
the network layer by devices performing Ingress Tunnel Router (ITR) the network layer by devices performing Ingress Tunnel Router (ITR)
and Egress Tunnel Router (ETR) LISP functions. Data plane operations and Egress Tunnel Router (ETR) LISP functions. Data plane operations
performed by these devices are described in [LISP]. Additionally, performed by these devices are described in [RFC6830]. Additionally,
data plane interworking between legacy (Internet) and LISP sites is data plane interworking between legacy (Internet) and LISP sites is
implemented by devices performing Proxy ITR (PITR) and Proxy ETR implemented by devices performing Proxy ITR (PITR) and Proxy ETR
(PETR) functions. The data plane operations of these devices is (PETR) functions. The data plane operations of these devices is
described in [INTERWORK]. described in [RFC6832].
From a control plane perspective, LISP employs mechanisms related to From a control plane perspective, LISP employs mechanisms related to
creating, maintaining, and resolving mappings from EIDs to RLOCs. creating, maintaining, and resolving mappings from EIDs to RLOCs.
LISP ITRs, ETRs, PITRs, and PETRs perform specific control plane LISP ITRs, ETRs, PITRs, and PETRs perform specific control plane
functions, and these control plane operations are described in functions, and these control plane operations are described in
[LISP]. Additionally, LISP infrastructure devices supporting LISP [RFC6830]. Additionally, LISP infrastructure devices supporting LISP
control plane functionality include Map-Servers and Map-Resolvers, control plane functionality include Map-Servers and Map-Resolvers,
and the control plane operations of these devices are described in and the control plane operations of these devices are described in
[LISP-MS]. Finally, while not specifically required, this document [RFC6833]. Finally, while not specifically required, this document
assumes the existence of a database to store and propagate those assumes the existence of a database to store and propagate those
mappings globally. mappings globally.
3. The Internet-Standard Management Framework 3. The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to section 7 of Internet-Standard Management Framework, please refer to section 7 of
RFC 3410 [RFC3410]. RFC 3410 [RFC3410].
Managed objects are accessed via a virtual information store, termed Managed objects are accessed via a virtual information store, termed
skipping to change at page 5, line 26 skipping to change at page 5, line 26
xTR: a term of general reference to an ITR or ETR when direction of xTR: a term of general reference to an ITR or ETR when direction of
data flow is not part of the context description. xTR refers to data flow is not part of the context description. xTR refers to
the router that is the tunnel endpoint and performs both ITR and the router that is the tunnel endpoint and performs both ITR and
ETR functionality. For example, "An xTR can be located at the ETR functionality. For example, "An xTR can be located at the
Customer Edge (CE) router," meaning both ITR and ETR functionality Customer Edge (CE) router," meaning both ITR and ETR functionality
is activated at the CE router. is activated at the CE router.
Proxy ITR (PITR): a router that acts like an ITR but does so on Proxy ITR (PITR): a router that acts like an ITR but does so on
behalf of non-LISP sites which send packets to destinations at behalf of non-LISP sites which send packets to destinations at
LISP sites. The PITR, also known as a PTR, is defined and LISP sites. The PITR, also known as a PTR, is defined and
described in [INTERWORK]. described in [RFC6832].
Proxy ETR (PETR): a router that acts like an ETR but does so on Proxy ETR (PETR): a router that acts like an ETR but does so on
behalf of LISP sites which send packets to destinations at non- behalf of LISP sites which send packets to destinations at non-
LISP sites. The PETR is defined and described in [INTERWORK]. LISP sites. The PETR is defined and described in [RFC6832].
LISP Site: a set of routers in an edge network that are under a LISP Site: a set of routers in an edge network that are under a
single technical administration. LISP routers which reside in the single technical administration. LISP routers which reside in the
edge network are the demarcation points to separate the edge edge network are the demarcation points to separate the edge
network from the core network. network from the core network.
Map-Server: a LISP network infrastructure component which learns Map-Server: a LISP network infrastructure component which learns
EID-to-RLOC mapping entries from an authoritative source such as EID-to-RLOC mapping entries from an authoritative source such as
an ETR through static configuration, or another out-of-band an ETR through static configuration, or another out-of-band
mechanism. A Map-Server advertises these mappings into the mechanism. A Map-Server advertises these mappings into the
skipping to change at page 8, line 31 skipping to change at page 8, line 31
Integer32, TimeTicks FROM SNMPv2-SMI -- [RFC2578] Integer32, TimeTicks FROM SNMPv2-SMI -- [RFC2578]
TruthValue, TEXTUAL-CONVENTION, TruthValue, TEXTUAL-CONVENTION,
TimeStamp FROM SNMPv2-TC -- [RFC2579] TimeStamp FROM SNMPv2-TC -- [RFC2579]
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- [RFC2580] MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- [RFC2580]
MplsL3VpnName MplsL3VpnName
FROM MPLS-L3VPN-STD-MIB -- [RFC4382] FROM MPLS-L3VPN-STD-MIB -- [RFC4382]
AddressFamilyNumbers AddressFamilyNumbers
FROM IANA-ADDRESS-FAMILY-NUMBERS-MIB; -- [IANA] FROM IANA-ADDRESS-FAMILY-NUMBERS-MIB; -- [IANA]
lispMIB MODULE-IDENTITY lispMIB MODULE-IDENTITY
LAST-UPDATED "201301030000Z" -- 03 January 2013 LAST-UPDATED "201302040000Z" -- 04 February 2013
ORGANIZATION ORGANIZATION
"IETF Locator/ID Separation Protocol (LISP) Working Group" "IETF Locator/ID Separation Protocol (LISP) Working Group"
CONTACT-INFO CONTACT-INFO
"Email: lisp@ietf.org "Email: lisp@ietf.org
WG charter: WG charter:
http://www.ietf.org/html.charters/lisp-charter.html" http://www.ietf.org/html.charters/lisp-charter.html"
DESCRIPTION DESCRIPTION
"Locator/ID Separation Protocol (LISP) MIB Textual "Locator/ID Separation Protocol (LISP) MIB Textual
Conventions module. The LISP MIB is intended for Conventions module. The LISP MIB is intended for
management of LISP routers. management of LISP routers.
Copyright (C) The IETF Trust (2013)." Copyright (C) The IETF Trust (2013)."
REVISION "201301030000Z" -- 03 January 2013 REVISION "201302040000Z" -- 04 February 2013
DESCRIPTION "Initial version of the IETF LISP-MIB module. Published DESCRIPTION "Initial version of the IETF LISP-MIB module. Published
as RFC xxxx." as RFC xxxx."
-- RFC Ed.: RFC-editor pls fill in xxxx -- RFC Ed.: RFC-editor pls fill in xxxx
::= { mib-2 XXX } ::= { mib-2 XXX }
-- RFC Ed.: assigned by IANA, see section 10 for details -- RFC Ed.: assigned by IANA, see section 10 for details
-- --
-- Textual Conventions -- Textual Conventions
-- --
skipping to change at page 11, line 10 skipping to change at page 11, line 10
indicates that the LCAF AF is 7-octets in length in this indicates that the LCAF AF is 7-octets in length in this
case, 2 indicates that LCAF Type 2 encoding is used (see case, 2 indicates that LCAF Type 2 encoding is used (see
[LCAF]), 101 gives the Instance ID, 1 gives the AFI (per [LCAF]), 101 gives the Instance ID, 1 gives the AFI (per
[IANA]) for an IPv4 address, 192.0.2.0 is the IPv4 [IANA]) for an IPv4 address, 192.0.2.0 is the IPv4
address, and 24 is the mask-length in bits. Note that the address, and 24 is the mask-length in bits. Note that the
lispMapCacheEidLength value of 11 octets is used to compute lispMapCacheEidLength value of 11 octets is used to compute
the length of the last field in lispMapCacheEid to be 1 octet, the length of the last field in lispMapCacheEid to be 1 octet,
as computed by 11 - (2 + 1 + 1 + 1 + 1 + 1 + 4) = 1." as computed by 11 - (2 + 1 + 1 + 1 + 1 + 1 + 4) = 1."
REFERENCE REFERENCE
"draft-ietf-lisp-23.txt, Section 14.2, "RFC6830, Section 14.2,
draft-ietf-lisp-lcaf-00.txt." draft-ietf-lisp-lcaf-00.txt."
SYNTAX OCTET STRING (SIZE (5..39)) SYNTAX OCTET STRING (SIZE (5..39))
-- --
-- Top level components of this MIB. -- Top level components of this MIB.
-- --
lispObjects OBJECT IDENTIFIER ::= { lispMIB 1 } lispObjects OBJECT IDENTIFIER ::= { lispMIB 1 }
lispConformance OBJECT IDENTIFIER ::= { lispMIB 2 } lispConformance OBJECT IDENTIFIER ::= { lispMIB 2 }
lispFeaturesTable OBJECT-TYPE lispFeaturesTable OBJECT-TYPE
SYNTAX SEQUENCE OF LispFeaturesEntry SYNTAX SEQUENCE OF LispFeaturesEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table represents the various LISP features "This table represents the various LISP features
that can be enabled on LISP devices." that can be enabled on LISP devices."
REFERENCE REFERENCE
"draft-ietf-lisp-23.txt, Section 4.0., Section 5.5., "RFC6830, Section 4.0., Section 5.5., Section 6.3."
Section 6.3."
::= { lispObjects 1 } ::= { lispObjects 1 }
lispFeaturesEntry OBJECT-TYPE lispFeaturesEntry OBJECT-TYPE
SYNTAX LispFeaturesEntry SYNTAX LispFeaturesEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry (conceptual row) in the lispFeaturesTable." "An entry (conceptual row) in the lispFeaturesTable."
INDEX { lispFeaturesInstanceID, INDEX { lispFeaturesInstanceID,
lispFeaturesAddressFamily } lispFeaturesAddressFamily }
skipping to change at page 16, line 13 skipping to change at page 16, line 13
::= { lispFeaturesEntry 15 } ::= { lispFeaturesEntry 15 }
lispIidToVrfTable OBJECT-TYPE lispIidToVrfTable OBJECT-TYPE
SYNTAX SEQUENCE OF LispIidToVrfEntry SYNTAX SEQUENCE OF LispIidToVrfEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table represents the mapping of LISP Instance ID "This table represents the mapping of LISP Instance ID
to a VRF." to a VRF."
REFERENCE REFERENCE
"draft-ietf-lisp-23.txt, Section 5.5." "RFC6830, Section 5.5."
::= { lispObjects 2 } ::= { lispObjects 2 }
lispIidToVrfEntry OBJECT-TYPE lispIidToVrfEntry OBJECT-TYPE
SYNTAX LispIidToVrfEntry SYNTAX LispIidToVrfEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry (conceptual row) in the lispIidToVrfTable." "An entry (conceptual row) in the lispIidToVrfTable."
INDEX { lispFeaturesInstanceID } INDEX { lispFeaturesInstanceID }
::= { lispIidToVrfTable 1 } ::= { lispIidToVrfTable 1 }
skipping to change at page 16, line 48 skipping to change at page 16, line 48
"RFC 4382, Section 7." "RFC 4382, Section 7."
lispGlobalStatsTable OBJECT-TYPE lispGlobalStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF LispGlobalStatsEntry SYNTAX SEQUENCE OF LispGlobalStatsEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table provides global statistics for a given "This table provides global statistics for a given
Instance ID per address-family on a LISP device." Instance ID per address-family on a LISP device."
REFERENCE REFERENCE
"draft-ietf-lisp-23.txt, Section 6.1." "RFC6830, Section 6.1."
::= { lispObjects 3 } ::= { lispObjects 3 }
lispGlobalStatsEntry OBJECT-TYPE lispGlobalStatsEntry OBJECT-TYPE
SYNTAX LispGlobalStatsEntry SYNTAX LispGlobalStatsEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry (conceptual row) in the "An entry (conceptual row) in the
lispGlobalStatsTable." lispGlobalStatsTable."
INDEX { lispFeaturesInstanceID, INDEX { lispFeaturesInstanceID,
skipping to change at page 19, line 27 skipping to change at page 19, line 27
SYNTAX SEQUENCE OF LispMappingDatabaseEntry SYNTAX SEQUENCE OF LispMappingDatabaseEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table represents the EID-to-RLOC mapping database that "This table represents the EID-to-RLOC mapping database that
contains the EID-prefix to RLOC mappings configured on an contains the EID-prefix to RLOC mappings configured on an
ETR. In general, this table would be representative of all ETR. In general, this table would be representative of all
such mappings for the given LISP site to which this device such mappings for the given LISP site to which this device
belongs." belongs."
REFERENCE REFERENCE
"draft-ietf-lisp-23.txt, Section 6.0." "RFC6830, Section 6.0."
::= { lispObjects 4 } ::= { lispObjects 4 }
lispMappingDatabaseEntry OBJECT-TYPE lispMappingDatabaseEntry OBJECT-TYPE
SYNTAX LispMappingDatabaseEntry SYNTAX LispMappingDatabaseEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry (conceptual row) in the lispMappingDatabaseTable." "An entry (conceptual row) in the lispMappingDatabaseTable."
INDEX { lispMappingDatabaseEidLength, INDEX { lispMappingDatabaseEidLength,
skipping to change at page 22, line 32 skipping to change at page 22, line 32
lispMappingDatabaseLocatorTable OBJECT-TYPE lispMappingDatabaseLocatorTable OBJECT-TYPE
SYNTAX SEQUENCE OF LispMappingDatabaseLocatorEntry SYNTAX SEQUENCE OF LispMappingDatabaseLocatorEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table represents the set of routing locators per EID "This table represents the set of routing locators per EID
prefix contained in the EID-to-RLOC database configured on prefix contained in the EID-to-RLOC database configured on
this ETR." this ETR."
REFERENCE REFERENCE
"draft-ietf-lisp-23.txt, Section 6.2." "RFC6830, Section 6.2."
::= { lispObjects 5 } ::= { lispObjects 5 }
lispMappingDatabaseLocatorEntry OBJECT-TYPE lispMappingDatabaseLocatorEntry OBJECT-TYPE
SYNTAX LispMappingDatabaseLocatorEntry SYNTAX LispMappingDatabaseLocatorEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry (conceptual row) in the "An entry (conceptual row) in the
lispMappingDatabaseLocatorTable." lispMappingDatabaseLocatorTable."
INDEX { lispMappingDatabaseEidLength, INDEX { lispMappingDatabaseEidLength,
skipping to change at page 26, line 39 skipping to change at page 26, line 39
lispMapCacheTable OBJECT-TYPE lispMapCacheTable OBJECT-TYPE
SYNTAX SEQUENCE OF LispMapCacheEntry SYNTAX SEQUENCE OF LispMapCacheEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table represents the short-lived, on-demand table on "This table represents the short-lived, on-demand table on
an ITR that stores, tracks, and is responsible for an ITR that stores, tracks, and is responsible for
timing-out and otherwise validating EID-to-RLOC mappings." timing-out and otherwise validating EID-to-RLOC mappings."
REFERENCE REFERENCE
"draft-ietf-lisp-23.txt, Section 6.0., Section 12.0." "RFC6830, Section 6.0., Section 12.0."
::= { lispObjects 6 } ::= { lispObjects 6 }
lispMapCacheEntry OBJECT-TYPE lispMapCacheEntry OBJECT-TYPE
SYNTAX LispMapCacheEntry SYNTAX LispMapCacheEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry (conceptual row) in the "An entry (conceptual row) in the
lispMapCacheTable." lispMapCacheTable."
INDEX { lispMapCacheEidLength, INDEX { lispMapCacheEidLength,
skipping to change at page 30, line 4 skipping to change at page 30, line 4
::= { lispMapCacheEntry 10 } ::= { lispMapCacheEntry 10 }
lispMapCacheLocatorTable OBJECT-TYPE lispMapCacheLocatorTable OBJECT-TYPE
SYNTAX SEQUENCE OF LispMapCacheLocatorEntry SYNTAX SEQUENCE OF LispMapCacheLocatorEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table represents the set of locators per EID prefix "This table represents the set of locators per EID prefix
contained in the map-cache table of an ITR." contained in the map-cache table of an ITR."
REFERENCE REFERENCE
"draft-ietf-lisp-23.txt, Section 6.3." "RFC6830, Section 6.3."
::= { lispObjects 7 } ::= { lispObjects 7 }
lispMapCacheLocatorEntry OBJECT-TYPE lispMapCacheLocatorEntry OBJECT-TYPE
SYNTAX LispMapCacheLocatorEntry SYNTAX LispMapCacheLocatorEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry (conceptual row) in the "An entry (conceptual row) in the
lispMapCacheLocatorTable." lispMapCacheLocatorTable."
INDEX { lispMapCacheEidLength, INDEX { lispMapCacheEidLength,
skipping to change at page 35, line 10 skipping to change at page 35, line 10
lispConfiguredLocatorTable OBJECT-TYPE lispConfiguredLocatorTable OBJECT-TYPE
SYNTAX SEQUENCE OF LispConfiguredLocatorEntry SYNTAX SEQUENCE OF LispConfiguredLocatorEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table represents the set of routing locators "This table represents the set of routing locators
configured on this device. Note that the Proxy-ITR configured on this device. Note that the Proxy-ITR
configured addresses are treated as routing locators configured addresses are treated as routing locators
and therefore can be part of this table." and therefore can be part of this table."
REFERENCE REFERENCE
"draft-ietf-lisp-23.txt, Section 6.3." "RFC6830, Section 6.3."
::= { lispObjects 8 } ::= { lispObjects 8 }
lispConfiguredLocatorEntry OBJECT-TYPE lispConfiguredLocatorEntry OBJECT-TYPE
SYNTAX LispConfiguredLocatorEntry SYNTAX LispConfiguredLocatorEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry (conceptual row) in the "An entry (conceptual row) in the
lispConfiguredLocatorTable." lispConfiguredLocatorTable."
INDEX { lispConfiguredLocatorRlocLength, INDEX { lispConfiguredLocatorRlocLength,
skipping to change at page 38, line 21 skipping to change at page 38, line 21
lispEidRegistrationTable OBJECT-TYPE lispEidRegistrationTable OBJECT-TYPE
SYNTAX SEQUENCE OF LispEidRegistrationEntry SYNTAX SEQUENCE OF LispEidRegistrationEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table provides the properties of each LISP EID prefix "This table provides the properties of each LISP EID prefix
that is registered with this device when configured to be that is registered with this device when configured to be
a Map-Server." a Map-Server."
REFERENCE REFERENCE
"draft-ietf-lisp-ms-16.txt, Section 4.0." "RFC6833, Section 4.0."
::= { lispObjects 9 } ::= { lispObjects 9 }
lispEidRegistrationEntry OBJECT-TYPE lispEidRegistrationEntry OBJECT-TYPE
SYNTAX LispEidRegistrationEntry SYNTAX LispEidRegistrationEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry (conceptual row) in the lispEidRegistrationTable." "An entry (conceptual row) in the lispEidRegistrationTable."
INDEX { lispEidRegistrationEidLength, INDEX { lispEidRegistrationEidLength,
lispEidRegistrationEid } lispEidRegistrationEid }
skipping to change at page 41, line 42 skipping to change at page 41, line 42
lispEidRegistrationEtrTable OBJECT-TYPE lispEidRegistrationEtrTable OBJECT-TYPE
SYNTAX SEQUENCE OF LispEidRegistrationEtrEntry SYNTAX SEQUENCE OF LispEidRegistrationEtrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table provides the properties of ETRs that register "This table provides the properties of ETRs that register
the given EID prefix with this device when configured to the given EID prefix with this device when configured to
be a Map-Server." be a Map-Server."
REFERENCE REFERENCE
"draft-ietf-lisp-23.txt, Section 6.1." "RFC6830, Section 6.1."
::= { lispObjects 10 } ::= { lispObjects 10 }
lispEidRegistrationEtrEntry OBJECT-TYPE lispEidRegistrationEtrEntry OBJECT-TYPE
SYNTAX LispEidRegistrationEtrEntry SYNTAX LispEidRegistrationEtrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry (conceptual row) in the "An entry (conceptual row) in the
lispEidRegistrationEtrTable." lispEidRegistrationEtrTable."
INDEX { lispEidRegistrationEidLength, INDEX { lispEidRegistrationEidLength,
skipping to change at page 43, line 43 skipping to change at page 43, line 43
lispEidRegistrationLocatorTable OBJECT-TYPE lispEidRegistrationLocatorTable OBJECT-TYPE
SYNTAX SEQUENCE OF LispEidRegistrationLocatorEntry SYNTAX SEQUENCE OF LispEidRegistrationLocatorEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table provides the properties of all locators per "This table provides the properties of all locators per
LISP site that are served by this device when configured LISP site that are served by this device when configured
to be a Map-Server." to be a Map-Server."
REFERENCE REFERENCE
"draft-ietf-lisp-23.txt, Section 6.1." "RFC6830, Section 6.1."
::= { lispObjects 11 } ::= { lispObjects 11 }
lispEidRegistrationLocatorEntry OBJECT-TYPE lispEidRegistrationLocatorEntry OBJECT-TYPE
SYNTAX LispEidRegistrationLocatorEntry SYNTAX LispEidRegistrationLocatorEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry (conceptual row) in the "An entry (conceptual row) in the
lispEidRegistrationLocatorTable." lispEidRegistrationLocatorTable."
INDEX { lispEidRegistrationEidLength, INDEX { lispEidRegistrationEidLength,
skipping to change at page 46, line 13 skipping to change at page 46, line 13
::= { lispEidRegistrationLocatorEntry 8 } ::= { lispEidRegistrationLocatorEntry 8 }
lispUseMapServerTable OBJECT-TYPE lispUseMapServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF LispUseMapServerEntry SYNTAX SEQUENCE OF LispUseMapServerEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table provides the properties of the map-server(s) "This table provides the properties of the map-server(s)
with which this device is configured to register." with which this device is configured to register."
REFERENCE REFERENCE
"draft-ietf-lisp-ms-16.txt, Section 4.3." "RFC6833, Section 4.3."
::= { lispObjects 12 } ::= { lispObjects 12 }
lispUseMapServerEntry OBJECT-TYPE lispUseMapServerEntry OBJECT-TYPE
SYNTAX LispUseMapServerEntry SYNTAX LispUseMapServerEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry (conceptual row) in the lispUseMapServerTable." "An entry (conceptual row) in the lispUseMapServerTable."
INDEX { lispUseMapServerAddressLength, INDEX { lispUseMapServerAddressLength,
lispUseMapServerAddress } lispUseMapServerAddress }
skipping to change at page 47, line 21 skipping to change at page 47, line 21
::= { lispUseMapServerEntry 3 } ::= { lispUseMapServerEntry 3 }
lispUseMapResolverTable OBJECT-TYPE lispUseMapResolverTable OBJECT-TYPE
SYNTAX SEQUENCE OF LispUseMapResolverEntry SYNTAX SEQUENCE OF LispUseMapResolverEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table provides the properties of the map-resolver(s) "This table provides the properties of the map-resolver(s)
this device is configured to use." this device is configured to use."
REFERENCE REFERENCE
"draft-ietf-lisp-ms-16.txt, Section 4.4." "RFC6833, Section 4.4."
::= { lispObjects 13 } ::= { lispObjects 13 }
lispUseMapResolverEntry OBJECT-TYPE lispUseMapResolverEntry OBJECT-TYPE
SYNTAX LispUseMapResolverEntry SYNTAX LispUseMapResolverEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry (conceptual row) in the "An entry (conceptual row) in the
lispUseMapResolverTable." lispUseMapResolverTable."
INDEX { lispUseMapResolverAddressLength, INDEX { lispUseMapResolverAddressLength,
skipping to change at page 48, line 31 skipping to change at page 48, line 31
::= { lispUseMapResolverEntry 3 } ::= { lispUseMapResolverEntry 3 }
lispUseProxyEtrTable OBJECT-TYPE lispUseProxyEtrTable OBJECT-TYPE
SYNTAX SEQUENCE OF LispUseProxyEtrEntry SYNTAX SEQUENCE OF LispUseProxyEtrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table provides the properties of all Proxy ETRs that "This table provides the properties of all Proxy ETRs that
this device is configured to use." this device is configured to use."
REFERENCE REFERENCE
"draft-ietf-lisp-ms-16.txt, Section 6.0." "RFC6830, Section 6.0."
::= { lispObjects 14 } ::= { lispObjects 14 }
lispUseProxyEtrEntry OBJECT-TYPE lispUseProxyEtrEntry OBJECT-TYPE
SYNTAX LispUseProxyEtrEntry SYNTAX LispUseProxyEtrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry (conceptual row) in the "An entry (conceptual row) in the
lispUseProxyEtrTable." lispUseProxyEtrTable."
INDEX { lispUseProxyEtrAddressLength, INDEX { lispUseProxyEtrAddressLength,
skipping to change at page 64, line 18 skipping to change at page 64, line 18
10. IANA Considerations 10. IANA Considerations
The MIB module in this document uses the following IANA-assigned The MIB module in this document uses the following IANA-assigned
OBJECT IDENTIFIER values recorded in the SMI Numbers registry: OBJECT IDENTIFIER values recorded in the SMI Numbers registry:
Descriptor OBJECT IDENTIFIER value Descriptor OBJECT IDENTIFIER value
---------- ----------------------- ---------- -----------------------
lispMib { mib-2 XXX } lispMib { mib-2 XXX }
[Editor's Note (to be removed prior to publication): the IANA is This document instructs IANA to allocate a new value in the "SMI
requested to assign a value for "XXX" under the 'mib-2' subtree and Network Management MGMT Codes Internet-standard MIB" subregistry of
to record the assignment in the SMI Numbers registry. When the the "Network Management Parameters" registry, according to the
assignment has been made, the RFC Editor is asked to replace "XXX" following registration data: Decimal: [TBD by IANA] Name: lispMIB
(here and in the MIB module) with the assigned value and to remove Description: Locator/ID Separation Protocol (LISP) References: [RFC
this note.] XXXX (this RFC)]
11. References 11. References
11.1. Normative References 11.1. Normative References
[IANA] "IANA-ADDRESS-FAMILY-NUMBERS-MIB DEFINITIONS", <http:// [IANA] "IANA-ADDRESS-FAMILY-NUMBERS-MIB DEFINITIONS", <http://
www.iana.org/assignments/ianaaddressfamilynumbers-mib>. www.iana.org/assignments/ianaaddressfamilynumbers-mib>.
[INTERWORK] Lewis, D., Meyer, D., Farinacci, D., and V. Fuller, [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
"Interworking LISP with IPv4 and IPv6", Requirement Levels", BCP 14, RFC 2119, March 1997.
draft-ietf-lisp-interworking-06.txt (work in progress),
March 2012.
[LISP] Farinacci, D., Fuller, V., Meyer, D., and D. Lewis, [RFC2578] McCloghrie, K., Ed., Perkins, D., Ed., and J.
"Locator/ID Separation Protocol (LISP)", Schoenwaelder, Ed., "Structure of Management Information
draft-ietf-lisp-23.txt (work in progress), May 2012. Version 2 (SMIv2)", STD 58, RFC 2578, April 1999.
[LISP-MS] Farinacci, D. and V. Fuller, "LISP Map Server", [RFC2579] McCloghrie, K., Ed., Perkins, D., Ed., and J.
draft-ietf-lisp-ms-16.txt (work in progress), Schoenwaelder, Ed., "Textual Conventions for SMIv2",
March 2012. STD 58, RFC 2579, April 1999.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate [RFC2580] McCloghrie, K., Perkins, D., and J. Schoenwaelder,
Requirement Levels", BCP 14, RFC 2119, March 1997. "Conformance Statements for SMIv2", STD 58, RFC 2580,
April 1999.
[RFC2578] McCloghrie, K., Ed., Perkins, D., Ed., and J. [RFC4382] Nadeau, T. and H. van der Linde, "MPLS/BGP Layer 3 Virtual
Schoenwaelder, Ed., "Structure of Management Private Network (VPN) Management Information Base",
Information Version 2 (SMIv2)", STD 58, RFC 2578, RFC 4382, February 2006.
April 1999.
[RFC2579] McCloghrie, K., Ed., Perkins, D., Ed., and J. [RFC6830] Farinacci, D., Fuller, V., Meyer, D., and D. Lewis, "The
Schoenwaelder, Ed., "Textual Conventions for SMIv2", Locator/ID Separation Protocol (LISP)", RFC 6830,
STD 58, RFC 2579, April 1999. January 2013.
[RFC2580] McCloghrie, K., Perkins, D., and J. Schoenwaelder, [RFC6832] Lewis, D., Meyer, D., Farinacci, D., and V. Fuller,
"Conformance Statements for SMIv2", STD 58, RFC 2580, "Interworking between Locator/ID Separation Protocol
April 1999. (LISP) and Non-LISP Sites", RFC 6832, January 2013.
[RFC4382] Nadeau, T. and H. van der Linde, "MPLS/BGP Layer 3 [RFC6833] Fuller, V. and D. Farinacci, "Locator/ID Separation
Virtual Private Network (VPN) Management Information Protocol (LISP) Map-Server Interface", RFC 6833,
Base", RFC 4382, February 2006. January 2013.
11.2. Informative References 11.2. Informative References
[LCAF] Farinacci, D., Meyer, D., and J. Snijders, "LISP [LCAF] Farinacci, D., Meyer, D., and J. Snijders, "LISP Canonical
Canonical Address Format", draft-ietf-lisp-lcaf-00.txt Address Format", draft-ietf-lisp-lcaf-00.txt (work in
(work in progress), August 2012. progress), August 2012.
[LISP-MCAST] Farinacci, D., Meyer, D., Zwiebel, J., and S. Venaas, [RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart,
"LISP for Multicast Environments", "Introduction and Applicability Statements for Internet-
draft-ietf-lisp-multicast-14.txt (work in progress), Standard Management Framework", RFC 3410, December 2002.
February 2012.
[RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart, [RFC6831] Farinacci, D., Meyer, D., Zwiebel, J., and S. Venaas, "The
"Introduction and Applicability Statements for Locator/ID Separation Protocol (LISP) for Multicast
Internet-Standard Management Framework", RFC 3410, Environments", RFC 6831, January 2013.
December 2002.
Appendix A. Open Issues Appendix A. Open Issues
Open issues for the LISP MIB include the following: Open issues for the LISP MIB include the following:
1. This LISP MIB draft does not include LISP Multicast [LISP-MCAST] 1. This LISP MIB draft does not include LISP Multicast [LISP-MCAST]
considerations. Multicast considerations will be added in a considerations. Multicast considerations will be added in a
separate LISP Multicast MIB draft. separate LISP Multicast MIB draft.
Appendix B. Acknowledgments Appendix B. Acknowledgments
A thank you is owed to Dino Farinacci for his inputs and review A thank you is owed to Dino Farinacci for his inputs and review
comments on the initial versions of this draft. In addition, the comments on the initial versions of this draft. In addition, the
authors would like to gratefully acknowledge several others who have authors would like to gratefully acknowledge several others who have
reviewed and commented on this draft. They include: Darrel Lewis, reviewed and commented on this draft. They include: Darrel Lewis,
Isidor Kouvelas, Jesper Skriver, Selina Heimlich, Parna Agrawal, Dan Isidor Kouvelas, Jesper Skriver, Selina Heimlich, Parna Agrawal, Dan
Romascanu, and Luigi Iannone. Romascanu, and Luigi Iannone. A special thanks to Brian Haberman,
the Internet Area AD, for his very detailed review. Also to Miguel
Garcia for reviewing this document as part of the General Area Review
Team.
Authors' Addresses Authors' Addresses
Gregg Schudel Gregg Schudel
cisco Systems cisco Systems
Tasman Drive Tasman Drive
San Jose, CA 95134 San Jose, CA 95134
USA USA
EMail: gschudel@cisco.com EMail: gschudel@cisco.com
 End of changes. 41 change blocks. 
74 lines changed or deleted 72 lines changed or added

This html diff was produced by rfcdiff 1.41. The latest version is available from http://tools.ietf.org/tools/rfcdiff/