draft-ietf-lisp-mib-07.txt   draft-ietf-lisp-mib-08.txt 
Network Working Group G. Schudel Network Working Group G. Schudel
Internet-Draft A. Jain Internet-Draft A. Jain
Intended status: Experimental V. Moreno Intended status: Experimental V. Moreno
Expires: April 18, 2013 cisco Systems Expires: July 8, 2013 cisco Systems
October 15, 2012 January 4, 2013
LISP MIB LISP MIB
draft-ietf-lisp-mib-07 draft-ietf-lisp-mib-08
Abstract Abstract
This document defines managed objects for the Locator/ID Separation This document defines managed objects for the Locator/ID Separation
Protocol (LISP). These objects provide information useful for Protocol (LISP). These objects provide information useful for
monitoring LISP devices, including basic configuration information, monitoring LISP devices, including basic configuration information,
LISP status, and operational statistics. LISP status, and operational statistics.
Status of This Memo Status of This Memo
skipping to change at page 1, line 34 skipping to change at page 1, line 34
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet- working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/. Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress." material or to cite them other than as "work in progress."
This Internet-Draft will expire on April 18, 2013. This Internet-Draft will expire on July 8, 2013.
Copyright Notice Copyright Notice
Copyright (c) 2012 IETF Trust and the persons identified as the Copyright (c) 2013 IETF Trust and the persons identified as the
document authors. All rights reserved. document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of (http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as the Trust Legal Provisions and are provided without warranty as
skipping to change at page 2, line 16 skipping to change at page 2, line 16
1. Requirements Notation . . . . . . . . . . . . . . . . . . . . 3 1. Requirements Notation . . . . . . . . . . . . . . . . . . . . 3
2. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3
3. The Internet-Standard Management Framework . . . . . . . . . . 3 3. The Internet-Standard Management Framework . . . . . . . . . . 3
4. Definition of Terms . . . . . . . . . . . . . . . . . . . . . 4 4. Definition of Terms . . . . . . . . . . . . . . . . . . . . . 4
5. LISP MIB Objectives . . . . . . . . . . . . . . . . . . . . . 6 5. LISP MIB Objectives . . . . . . . . . . . . . . . . . . . . . 6
6. Structure of LISP MIB Module . . . . . . . . . . . . . . . . . 6 6. Structure of LISP MIB Module . . . . . . . . . . . . . . . . . 6
6.1. Overview of Defined Notifications . . . . . . . . . . . . 6 6.1. Overview of Defined Notifications . . . . . . . . . . . . 6
6.2. Overview of Defined Tables . . . . . . . . . . . . . . . . 7 6.2. Overview of Defined Tables . . . . . . . . . . . . . . . . 7
7. LISP MIB Definitions . . . . . . . . . . . . . . . . . . . . . 8 7. LISP MIB Definitions . . . . . . . . . . . . . . . . . . . . . 8
8. Relationship to Other MIB Modules . . . . . . . . . . . . . . 62 8. Relationship to Other MIB Modules . . . . . . . . . . . . . . 63
8.1. MIB modules required for IMPORTS . . . . . . . . . . . . . 62 8.1. MIB modules required for IMPORTS . . . . . . . . . . . . . 63
9. Security Considerations . . . . . . . . . . . . . . . . . . . 62 9. Security Considerations . . . . . . . . . . . . . . . . . . . 63
10. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 63 10. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 64
11. References . . . . . . . . . . . . . . . . . . . . . . . . . . 63 11. References . . . . . . . . . . . . . . . . . . . . . . . . . . 64
11.1. Normative References . . . . . . . . . . . . . . . . . . . 63 11.1. Normative References . . . . . . . . . . . . . . . . . . . 64
11.2. Informative References . . . . . . . . . . . . . . . . . . 64 11.2. Informative References . . . . . . . . . . . . . . . . . . 65
Appendix A. Open Issues . . . . . . . . . . . . . . . . . . . . . 64 Appendix A. Open Issues . . . . . . . . . . . . . . . . . . . . . 65
Appendix B. Acknowledgments . . . . . . . . . . . . . . . . . . . 64 Appendix B. Acknowledgments . . . . . . . . . . . . . . . . . . . 65
1. Requirements Notation 1. Requirements Notation
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in "OPTIONAL" in this document are to be interpreted as described in
[RFC2119]. [RFC2119].
2. Introduction 2. Introduction
skipping to change at page 7, line 13 skipping to change at page 7, line 13
No LISP MIB notifications are defined. No LISP MIB notifications are defined.
6.2. Overview of Defined Tables 6.2. Overview of Defined Tables
The LISP MIB module is composed of the following tables of objects: The LISP MIB module is composed of the following tables of objects:
lispFeatures - This table provides information representing the lispFeatures - This table provides information representing the
various lisp features that can be enabled on LISP devices. various lisp features that can be enabled on LISP devices.
lispIidToVrf - This table provides information representing the lispIidToVrf - This table provides information representing the
mapping of a LISP instance ID to a VRF. mapping of a LISP instance ID to a VRF (Virtual Routing/
Forwarding).
lispGlobalStats - This table provides global statistics for a given lispGlobalStats - This table provides global statistics for a given
Instance ID per address-family on a LISP device. Instance ID per address-family on a LISP device.
lispMappingDatabase - This table represents the EID-to-RLOC database lispMappingDatabase - This table represents the EID-to-RLOC database
that contains the EID-prefix to RLOC mappings configured on an that contains the EID-prefix to RLOC mappings configured on an
ETR. In general, this table would be representative of all such ETR. In general, this table would be representative of all such
mappings for a given site that this device belongs to. mappings for a given site that this device belongs to.
lispMappingDatabaseLocator - This table represents the set of lispMappingDatabaseLocator - This table represents the set of
skipping to change at page 8, line 28 skipping to change at page 8, line 31
Integer32, TimeTicks FROM SNMPv2-SMI -- [RFC2578] Integer32, TimeTicks FROM SNMPv2-SMI -- [RFC2578]
TruthValue, TEXTUAL-CONVENTION, TruthValue, TEXTUAL-CONVENTION,
TimeStamp FROM SNMPv2-TC -- [RFC2579] TimeStamp FROM SNMPv2-TC -- [RFC2579]
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- [RFC2580] MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- [RFC2580]
MplsL3VpnName MplsL3VpnName
FROM MPLS-L3VPN-STD-MIB -- [RFC4382] FROM MPLS-L3VPN-STD-MIB -- [RFC4382]
AddressFamilyNumbers AddressFamilyNumbers
FROM IANA-ADDRESS-FAMILY-NUMBERS-MIB; -- [IANA] FROM IANA-ADDRESS-FAMILY-NUMBERS-MIB; -- [IANA]
lispMIB MODULE-IDENTITY lispMIB MODULE-IDENTITY
LAST-UPDATED "201210150000Z" -- 15 October 2012 LAST-UPDATED "201301030000Z" -- 03 January 2013
ORGANIZATION ORGANIZATION
"IETF Locator/ID Separation Protocol (LISP) Working Group" "IETF Locator/ID Separation Protocol (LISP) Working Group"
CONTACT-INFO CONTACT-INFO
"Email: lisp@ietf.org "Email: lisp@ietf.org
WG charter: WG charter:
http://www.ietf.org/html.charters/lisp-charter.html" http://www.ietf.org/html.charters/lisp-charter.html"
DESCRIPTION DESCRIPTION
"Locator/ID Separation Protocol (LISP) MIB Textual "Locator/ID Separation Protocol (LISP) MIB Textual
Conventions module. The LISP MIB is intended for Conventions module. The LISP MIB is intended for
management of LISP routers. management of LISP routers.
Copyright (C) The IETF Trust (2012)." Copyright (C) The IETF Trust (2013)."
REVISION "201210150000Z" -- 15 October 2012 REVISION "201301030000Z" -- 03 January 2013
DESCRIPTION "Initial version of the IETF LISP-MIB module. Published DESCRIPTION "Initial version of the IETF LISP-MIB module. Published
as RFC xxxx." as RFC xxxx."
-- RFC Ed.: RFC-editor pls fill in xxxx -- RFC Ed.: RFC-editor pls fill in xxxx
::= { mib-2 XXX } ::= { mib-2 XXX }
-- RFC Ed.: assigned by IANA, see section 10 for details -- RFC Ed.: assigned by IANA, see section 10 for details
-- --
-- Textual Conventions -- Textual Conventions
-- --
LispAddressType ::= TEXTUAL-CONVENTION LispAddressType ::= TEXTUAL-CONVENTION
DISPLAY-HINT "39a" DISPLAY-HINT "39a"
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"LISP architecture can be applied to a wide variety of "LISP architecture can be applied to a wide variety of
address-families. This textual-convention is a address-families. This textual-convention is a
generalization for representing addresses that belong to those generalization for representing addresses that belong to those
address-families. For convenience, this document refers to any address-families. For convenience, this document refers to any
such address as a LISP address. LispAddressType such address as a LISP address. LispAddressType
textual-convention consists of the following four-tuple: textual-convention consists of the following four-tuple:
skipping to change at page 11, line 8 skipping to change at page 11, line 10
indicates that the LCAF AF is 7-octets in length in this indicates that the LCAF AF is 7-octets in length in this
case, 2 indicates that LCAF Type 2 encoding is used (see case, 2 indicates that LCAF Type 2 encoding is used (see
[LCAF]), 101 gives the Instance ID, 1 gives the AFI (per [LCAF]), 101 gives the Instance ID, 1 gives the AFI (per
[IANA]) for an IPv4 address, 192.0.2.0 is the IPv4 [IANA]) for an IPv4 address, 192.0.2.0 is the IPv4
address, and 24 is the mask-length in bits. Note that the address, and 24 is the mask-length in bits. Note that the
lispMapCacheEidLength value of 11 octets is used to compute lispMapCacheEidLength value of 11 octets is used to compute
the length of the last field in lispMapCacheEid to be 1 octet, the length of the last field in lispMapCacheEid to be 1 octet,
as computed by 11 - (2 + 1 + 1 + 1 + 1 + 1 + 4) = 1." as computed by 11 - (2 + 1 + 1 + 1 + 1 + 1 + 4) = 1."
REFERENCE REFERENCE
"[LISP], Section 14.2." "draft-ietf-lisp-23.txt, Section 14.2,
draft-ietf-lisp-lcaf-00.txt."
SYNTAX OCTET STRING (SIZE (5..39)) SYNTAX OCTET STRING (SIZE (5..39))
-- --
-- Top level components of this MIB. -- Top level components of this MIB.
-- --
lispObjects OBJECT IDENTIFIER ::= { lispMIB 1 } lispObjects OBJECT IDENTIFIER ::= { lispMIB 1 }
lispConformance OBJECT IDENTIFIER ::= { lispMIB 2 } lispConformance OBJECT IDENTIFIER ::= { lispMIB 2 }
lispFeaturesTable OBJECT-TYPE lispFeaturesTable OBJECT-TYPE
SYNTAX SEQUENCE OF LispFeaturesEntry SYNTAX SEQUENCE OF LispFeaturesEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table represents the various LISP features "This table represents the various LISP features
that can be enabled on LISP devices." that can be enabled on LISP devices."
REFERENCE REFERENCE
"[LISP], Section 4.0., Section 5.5., Section 6.3." "draft-ietf-lisp-23.txt, Section 4.0., Section 5.5.,
Section 6.3."
::= { lispObjects 1 } ::= { lispObjects 1 }
lispFeaturesEntry OBJECT-TYPE lispFeaturesEntry OBJECT-TYPE
SYNTAX LispFeaturesEntry SYNTAX LispFeaturesEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry (conceptual row) in the lispFeaturesTable." "An entry (conceptual row) in the lispFeaturesTable."
INDEX { lispFeaturesInstanceID, INDEX { lispFeaturesInstanceID,
lispFeaturesAddressFamily } lispFeaturesAddressFamily }
skipping to change at page 12, line 27 skipping to change at page 12, line 31
An Instance ID in the LISP address encoding helps An Instance ID in the LISP address encoding helps
uniquely identify the AFI-based address space to which uniquely identify the AFI-based address space to which
a given EID belongs. It's default value is 0." a given EID belongs. It's default value is 0."
::= { lispFeaturesEntry 1 } ::= { lispFeaturesEntry 1 }
lispFeaturesAddressFamily OBJECT-TYPE lispFeaturesAddressFamily OBJECT-TYPE
SYNTAX AddressFamilyNumbers SYNTAX AddressFamilyNumbers
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The IANA address family number that the LISP device "The IANA address family number of destination address
is enabled to LISP process a packet for as a of packets that this LISP device is enabled to process."
destination address family."
::= { lispFeaturesEntry 2 } ::= { lispFeaturesEntry 2 }
lispFeaturesItrEnabled OBJECT-TYPE lispFeaturesItrEnabled OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates the status of ITR role on this device. If "Indicates the status of ITR role on this device. If
this object is TRUE, then ITR feature is enabled." this object is TRUE, then ITR feature is enabled."
::= { lispFeaturesEntry 3 } ::= { lispFeaturesEntry 3 }
skipping to change at page 14, line 5 skipping to change at page 14, line 7
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Size of EID-to-RLOC map cache on this device." "Size of EID-to-RLOC map cache on this device."
::= { lispFeaturesEntry 9 } ::= { lispFeaturesEntry 9 }
lispFeaturesMapCacheLimit OBJECT-TYPE lispFeaturesMapCacheLimit OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Maximum permissible size of EID-to-RLOC map cache on "Maximum permissible entries in EID-to-RLOC map cache on
this device." this device."
::= { lispFeaturesEntry 10 } ::= { lispFeaturesEntry 10 }
lispFeaturesEtrMapCacheTtl OBJECT-TYPE lispFeaturesEtrMapCacheTtl OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The stored Record TTL of the EID-to-RLOC map record in "The stored Record TTL of the EID-to-RLOC map record in
the map cache." the map cache."
skipping to change at page 15, line 21 skipping to change at page 16, line 13
::= { lispFeaturesEntry 15 } ::= { lispFeaturesEntry 15 }
lispIidToVrfTable OBJECT-TYPE lispIidToVrfTable OBJECT-TYPE
SYNTAX SEQUENCE OF LispIidToVrfEntry SYNTAX SEQUENCE OF LispIidToVrfEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table represents the mapping of LISP Instance ID "This table represents the mapping of LISP Instance ID
to a VRF." to a VRF."
REFERENCE REFERENCE
"[LISP], Section 5.5." "draft-ietf-lisp-23.txt, Section 5.5."
::= { lispObjects 2 } ::= { lispObjects 2 }
lispIidToVrfEntry OBJECT-TYPE lispIidToVrfEntry OBJECT-TYPE
SYNTAX LispIidToVrfEntry SYNTAX LispIidToVrfEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry (conceptual row) in the lispIidToVrfTable." "An entry (conceptual row) in the lispIidToVrfTable."
INDEX { lispFeaturesInstanceID } INDEX { lispFeaturesInstanceID }
::= { lispIidToVrfTable 1 } ::= { lispIidToVrfTable 1 }
LispIidToVrfEntry ::= SEQUENCE { LispIidToVrfEntry ::= SEQUENCE {
lispIidToVrfName MplsL3VpnName lispIidToVrfName MplsL3VpnName
} }
lispIidToVrfName OBJECT-TYPE lispIidToVrfName OBJECT-TYPE
SYNTAX MplsL3VpnName SYNTAX MplsL3VpnName
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The identifier for each VPN, as specified in "The identifier for each VPN that is mapped to the
RFC 4382, Section 7 [RFC4382], that is mapped to the
given LISP Instance ID." given LISP Instance ID."
::= { lispIidToVrfEntry 2 } ::= { lispIidToVrfEntry 2 }
REFERENCE
"RFC 4382, Section 7."
lispGlobalStatsTable OBJECT-TYPE lispGlobalStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF LispGlobalStatsEntry SYNTAX SEQUENCE OF LispGlobalStatsEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table provides global statistics for a given "This table provides global statistics for a given
Instance ID per address-family on a LISP device." Instance ID per address-family on a LISP device."
REFERENCE REFERENCE
"[LISP], Section 6.1." "draft-ietf-lisp-23.txt, Section 6.1."
::= { lispObjects 3 } ::= { lispObjects 3 }
lispGlobalStatsEntry OBJECT-TYPE lispGlobalStatsEntry OBJECT-TYPE
SYNTAX LispGlobalStatsEntry SYNTAX LispGlobalStatsEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry (conceptual row) in the "An entry (conceptual row) in the
lispGlobalStatsTable." lispGlobalStatsTable."
INDEX { lispFeaturesInstanceID, INDEX { lispFeaturesInstanceID,
skipping to change at page 18, line 38 skipping to change at page 19, line 27
SYNTAX SEQUENCE OF LispMappingDatabaseEntry SYNTAX SEQUENCE OF LispMappingDatabaseEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table represents the EID-to-RLOC mapping database that "This table represents the EID-to-RLOC mapping database that
contains the EID-prefix to RLOC mappings configured on an contains the EID-prefix to RLOC mappings configured on an
ETR. In general, this table would be representative of all ETR. In general, this table would be representative of all
such mappings for the given LISP site to which this device such mappings for the given LISP site to which this device
belongs." belongs."
REFERENCE REFERENCE
"[LISP], Section 6.0." "draft-ietf-lisp-23.txt, Section 6.0."
::= { lispObjects 4 } ::= { lispObjects 4 }
lispMappingDatabaseEntry OBJECT-TYPE lispMappingDatabaseEntry OBJECT-TYPE
SYNTAX LispMappingDatabaseEntry SYNTAX LispMappingDatabaseEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry (conceptual row) in the lispMappingDatabaseTable." "An entry (conceptual row) in the lispMappingDatabaseTable."
INDEX { lispMappingDatabaseEidLength, INDEX { lispMappingDatabaseEidLength,
skipping to change at page 21, line 41 skipping to change at page 22, line 32
lispMappingDatabaseLocatorTable OBJECT-TYPE lispMappingDatabaseLocatorTable OBJECT-TYPE
SYNTAX SEQUENCE OF LispMappingDatabaseLocatorEntry SYNTAX SEQUENCE OF LispMappingDatabaseLocatorEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table represents the set of routing locators per EID "This table represents the set of routing locators per EID
prefix contained in the EID-to-RLOC database configured on prefix contained in the EID-to-RLOC database configured on
this ETR." this ETR."
REFERENCE REFERENCE
"[LISP], Section 6.2." "draft-ietf-lisp-23.txt, Section 6.2."
::= { lispObjects 5 } ::= { lispObjects 5 }
lispMappingDatabaseLocatorEntry OBJECT-TYPE lispMappingDatabaseLocatorEntry OBJECT-TYPE
SYNTAX LispMappingDatabaseLocatorEntry SYNTAX LispMappingDatabaseLocatorEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry (conceptual row) in the "An entry (conceptual row) in the
lispMappingDatabaseLocatorTable." lispMappingDatabaseLocatorTable."
INDEX { lispMappingDatabaseEidLength, INDEX { lispMappingDatabaseEidLength,
lispMappingDatabaseEid, lispMappingDatabaseEid,
lispMappingDatabaseLocatorRlocLength, lispMappingDatabaseLocatorRlocLength,
lispMappingDatabaseLocatorRloc } lispMappingDatabaseLocatorRloc }
::= { lispMappingDatabaseLocatorTable 1 } ::= { lispMappingDatabaseLocatorTable 1 }
LispMappingDatabaseLocatorEntry ::= SEQUENCE { LispMappingDatabaseLocatorEntry ::= SEQUENCE {
lispMappingDatabaseLocatorRlocLength Integer32, lispMappingDatabaseLocatorRlocLength Integer32,
lispMappingDatabaseLocatorRloc LispAddressType, lispMappingDatabaseLocatorRloc LispAddressType,
lispMappingDatabaseLocatorRlocPriority Integer32, lispMappingDatabaseLocatorRlocPriority Integer32,
skipping to change at page 22, line 33 skipping to change at page 23, line 22
lispMappingDatabaseLocatorRlocEncapOctets Counter64, lispMappingDatabaseLocatorRlocEncapOctets Counter64,
lispMappingDatabaseLocatorRlocEncapPackets Counter64 lispMappingDatabaseLocatorRlocEncapPackets Counter64
} }
lispMappingDatabaseLocatorRlocLength OBJECT-TYPE lispMappingDatabaseLocatorRlocLength OBJECT-TYPE
SYNTAX Integer32 (5..259) SYNTAX Integer32 (5..259)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to get the octet-length of "This object is used to get the octet-length of
lispMappingDatabaseLocatorRloc, the next object." lispMappingDatabaseLocatorRloc."
::= { lispMappingDatabaseLocatorEntry 1 } ::= { lispMappingDatabaseLocatorEntry 1 }
lispMappingDatabaseLocatorRloc OBJECT-TYPE lispMappingDatabaseLocatorRloc OBJECT-TYPE
SYNTAX LispAddressType SYNTAX LispAddressType
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is a locator for the given EID prefix in the "This object is a locator for the given EID prefix in the
mapping database." mapping database."
::= { lispMappingDatabaseLocatorEntry 2 } ::= { lispMappingDatabaseLocatorEntry 2 }
skipping to change at page 25, line 50 skipping to change at page 26, line 39
lispMapCacheTable OBJECT-TYPE lispMapCacheTable OBJECT-TYPE
SYNTAX SEQUENCE OF LispMapCacheEntry SYNTAX SEQUENCE OF LispMapCacheEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table represents the short-lived, on-demand table on "This table represents the short-lived, on-demand table on
an ITR that stores, tracks, and is responsible for an ITR that stores, tracks, and is responsible for
timing-out and otherwise validating EID-to-RLOC mappings." timing-out and otherwise validating EID-to-RLOC mappings."
REFERENCE REFERENCE
"[LISP], Section 6.0., Section 12.0." "draft-ietf-lisp-23.txt, Section 6.0., Section 12.0."
::= { lispObjects 6 } ::= { lispObjects 6 }
lispMapCacheEntry OBJECT-TYPE lispMapCacheEntry OBJECT-TYPE
SYNTAX LispMapCacheEntry SYNTAX LispMapCacheEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry (conceptual row) in the "An entry (conceptual row) in the
lispMapCacheTable." lispMapCacheTable."
INDEX { lispMapCacheEidLength, INDEX { lispMapCacheEidLength,
skipping to change at page 26, line 35 skipping to change at page 27, line 24
lispMapCacheEidEncapOctets Counter64, lispMapCacheEidEncapOctets Counter64,
lispMapCacheEidEncapPackets Counter64 lispMapCacheEidEncapPackets Counter64
} }
lispMapCacheEidLength OBJECT-TYPE lispMapCacheEidLength OBJECT-TYPE
SYNTAX Integer32 (5..259) SYNTAX Integer32 (5..259)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to get the octet-length of "This object is used to get the octet-length of
lispMapCacheEid, the next object." lispMapCacheEid."
::= { lispMapCacheEntry 1 } ::= { lispMapCacheEntry 1 }
lispMapCacheEid OBJECT-TYPE lispMapCacheEid OBJECT-TYPE
SYNTAX LispAddressType SYNTAX LispAddressType
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The EID prefix in the mapping cache." "The EID prefix in the mapping cache."
::= { lispMapCacheEntry 2 } ::= { lispMapCacheEntry 2 }
skipping to change at page 29, line 13 skipping to change at page 30, line 4
::= { lispMapCacheEntry 10 } ::= { lispMapCacheEntry 10 }
lispMapCacheLocatorTable OBJECT-TYPE lispMapCacheLocatorTable OBJECT-TYPE
SYNTAX SEQUENCE OF LispMapCacheLocatorEntry SYNTAX SEQUENCE OF LispMapCacheLocatorEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table represents the set of locators per EID prefix "This table represents the set of locators per EID prefix
contained in the map-cache table of an ITR." contained in the map-cache table of an ITR."
REFERENCE REFERENCE
"[LISP], Section 6.3." "draft-ietf-lisp-23.txt, Section 6.3."
::= { lispObjects 7 } ::= { lispObjects 7 }
lispMapCacheLocatorEntry OBJECT-TYPE lispMapCacheLocatorEntry OBJECT-TYPE
SYNTAX LispMapCacheLocatorEntry SYNTAX LispMapCacheLocatorEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry (conceptual row) in the "An entry (conceptual row) in the
lispMapCacheLocatorTable." lispMapCacheLocatorTable."
INDEX { lispMapCacheEidLength, INDEX { lispMapCacheEidLength,
skipping to change at page 30, line 7 skipping to change at page 30, line 47
lispMapCacheLocatorRlocEncapOctets Counter64, lispMapCacheLocatorRlocEncapOctets Counter64,
lispMapCacheLocatorRlocEncapPackets Counter64 lispMapCacheLocatorRlocEncapPackets Counter64
} }
lispMapCacheLocatorRlocLength OBJECT-TYPE lispMapCacheLocatorRlocLength OBJECT-TYPE
SYNTAX Integer32 (5..259) SYNTAX Integer32 (5..259)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to get the octet-length of "This object is used to get the octet-length of
lispMapCacheLocatorRloc, the next object." lispMapCacheLocatorRloc."
::= { lispMapCacheLocatorEntry 1 } ::= { lispMapCacheLocatorEntry 1 }
lispMapCacheLocatorRloc OBJECT-TYPE lispMapCacheLocatorRloc OBJECT-TYPE
SYNTAX LispAddressType SYNTAX LispAddressType
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The locator for the EID prefix in the mapping cache." "The locator for the EID prefix in the mapping cache."
::= { lispMapCacheLocatorEntry 2 } ::= { lispMapCacheLocatorEntry 2 }
skipping to change at page 31, line 4 skipping to change at page 31, line 44
(0-255); lower more preferred." (0-255); lower more preferred."
::= { lispMapCacheLocatorEntry 5 } ::= { lispMapCacheLocatorEntry 5 }
lispMapCacheLocatorRlocMWeight OBJECT-TYPE lispMapCacheLocatorRlocMWeight OBJECT-TYPE
SYNTAX Integer32 (0..100) SYNTAX Integer32 (0..100)
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The multicast weight of the RLOC for this EID prefix "The multicast weight of the RLOC for this EID prefix
(0 - 100) percentage." (0 - 100) percentage."
::= { lispMapCacheLocatorEntry 6 } ::= { lispMapCacheLocatorEntry 6 }
lispMapCacheLocatorRlocState OBJECT-TYPE lispMapCacheLocatorRlocState OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
up (1), up (1),
down (2) down (2),
unreachable (3)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The state of this RLOC as per this device "The state of this RLOC as per this device
(1 = RLOC is up; 2 = RLOC is down)." (1 = RLOC is up; 2 = RLOC is down)."
::= { lispMapCacheLocatorEntry 7 } ::= { lispMapCacheLocatorEntry 7 }
lispMapCacheLocatorRlocTimeStamp OBJECT-TYPE lispMapCacheLocatorRlocTimeStamp OBJECT-TYPE
SYNTAX TimeStamp SYNTAX TimeStamp
MAX-ACCESS read-only MAX-ACCESS read-only
skipping to change at page 31, line 38 skipping to change at page 32, line 31
If this information was present at the most recent If this information was present at the most recent
re-initialization of the local management subsystem, re-initialization of the local management subsystem,
then this object contains a zero value." then this object contains a zero value."
::= { lispMapCacheLocatorEntry 8 } ::= { lispMapCacheLocatorEntry 8 }
lispMapCacheLocatorRlocLastPriorityChange OBJECT-TYPE lispMapCacheLocatorRlocLastPriorityChange OBJECT-TYPE
SYNTAX TimeTicks SYNTAX TimeTicks
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Time since the last change of the unicast priority of the "Time elapsed since the last change of the unicast priority
RLOC for this EID prefix." of the RLOC for this EID prefix. Note that this is
independent of lispMapCacheLocatorRlocTimeStamp."
::= { lispMapCacheLocatorEntry 9 } ::= { lispMapCacheLocatorEntry 9 }
lispMapCacheLocatorRlocLastWeightChange OBJECT-TYPE lispMapCacheLocatorRlocLastWeightChange OBJECT-TYPE
SYNTAX TimeTicks SYNTAX TimeTicks
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Time since the last change of the unicast weight of the "Time elapsed since the last change of the unicast weight
RLOC for this EID prefix." of the RLOC for this EID prefix.Note that this is
independent of lispMapCacheLocatorRlocTimeStamp."
::= { lispMapCacheLocatorEntry 10 } ::= { lispMapCacheLocatorEntry 10 }
lispMapCacheLocatorRlocLastMPriorityChange OBJECT-TYPE lispMapCacheLocatorRlocLastMPriorityChange OBJECT-TYPE
SYNTAX TimeTicks SYNTAX TimeTicks
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Time since the last change of the multicast priority of the "Time since the last change of the multicast priority of the
RLOC for this EID prefix." RLOC for this EID prefix."
::= { lispMapCacheLocatorEntry 11 } ::= { lispMapCacheLocatorEntry 11 }
lispMapCacheLocatorRlocLastMWeightChange OBJECT-TYPE lispMapCacheLocatorRlocLastMWeightChange OBJECT-TYPE
SYNTAX TimeTicks SYNTAX TimeTicks
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Time since the last change of the multicast weight of the "Time since the last change of the multicast weight of the
RLOC for this EID prefix." RLOC for this EID prefix."
::= { lispMapCacheLocatorEntry 12 } ::= { lispMapCacheLocatorEntry 12 }
skipping to change at page 34, line 15 skipping to change at page 35, line 10
lispConfiguredLocatorTable OBJECT-TYPE lispConfiguredLocatorTable OBJECT-TYPE
SYNTAX SEQUENCE OF LispConfiguredLocatorEntry SYNTAX SEQUENCE OF LispConfiguredLocatorEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table represents the set of routing locators "This table represents the set of routing locators
configured on this device. Note that the Proxy-ITR configured on this device. Note that the Proxy-ITR
configured addresses are treated as routing locators configured addresses are treated as routing locators
and therefore can be part of this table." and therefore can be part of this table."
REFERENCE REFERENCE
"[LISP], Section 6.3." "draft-ietf-lisp-23.txt, Section 6.3."
::= { lispObjects 8 } ::= { lispObjects 8 }
lispConfiguredLocatorEntry OBJECT-TYPE lispConfiguredLocatorEntry OBJECT-TYPE
SYNTAX LispConfiguredLocatorEntry SYNTAX LispConfiguredLocatorEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry (conceptual row) in the "An entry (conceptual row) in the
lispConfiguredLocatorTable." lispConfiguredLocatorTable."
INDEX { lispConfiguredLocatorRlocLength, INDEX { lispConfiguredLocatorRlocLength,
skipping to change at page 34, line 47 skipping to change at page 35, line 42
lispConfiguredLocatorRlocEncapOctets Counter64, lispConfiguredLocatorRlocEncapOctets Counter64,
lispConfiguredLocatorRlocEncapPackets Counter64 lispConfiguredLocatorRlocEncapPackets Counter64
} }
lispConfiguredLocatorRlocLength OBJECT-TYPE lispConfiguredLocatorRlocLength OBJECT-TYPE
SYNTAX Integer32 (5..259) SYNTAX Integer32 (5..259)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to get the octet-length of "This object is used to get the octet-length of
lispConfiguredLocatorRloc, the next object." lispConfiguredLocatorRloc."
::= { lispConfiguredLocatorEntry 1 } ::= { lispConfiguredLocatorEntry 1 }
lispConfiguredLocatorRloc OBJECT-TYPE lispConfiguredLocatorRloc OBJECT-TYPE
SYNTAX LispAddressType SYNTAX LispAddressType
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is a RLOC address configured on this device. "This object is a RLOC address configured on this device.
It can be an RLOC that is local to this device or can be an It can be an RLOC that is local to this device or can be an
RLOC which belongs to another ETR within the same site. RLOC which belongs to another ETR within the same site.
skipping to change at page 37, line 25 skipping to change at page 38, line 21
lispEidRegistrationTable OBJECT-TYPE lispEidRegistrationTable OBJECT-TYPE
SYNTAX SEQUENCE OF LispEidRegistrationEntry SYNTAX SEQUENCE OF LispEidRegistrationEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table provides the properties of each LISP EID prefix "This table provides the properties of each LISP EID prefix
that is registered with this device when configured to be that is registered with this device when configured to be
a Map-Server." a Map-Server."
REFERENCE REFERENCE
"[LISP-MS], Section 4.0." "draft-ietf-lisp-ms-16.txt, Section 4.0."
::= { lispObjects 9 } ::= { lispObjects 9 }
lispEidRegistrationEntry OBJECT-TYPE lispEidRegistrationEntry OBJECT-TYPE
SYNTAX LispEidRegistrationEntry SYNTAX LispEidRegistrationEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry (conceptual row) in the lispEidRegistrationTable." "An entry (conceptual row) in the lispEidRegistrationTable."
INDEX { lispEidRegistrationEidLength, INDEX { lispEidRegistrationEidLength,
lispEidRegistrationEid } lispEidRegistrationEid }
skipping to change at page 37, line 48 skipping to change at page 38, line 44
LispEidRegistrationEntry ::= SEQUENCE { LispEidRegistrationEntry ::= SEQUENCE {
lispEidRegistrationEidLength Integer32, lispEidRegistrationEidLength Integer32,
lispEidRegistrationEid LispAddressType, lispEidRegistrationEid LispAddressType,
lispEidRegistrationSiteName OCTET STRING, lispEidRegistrationSiteName OCTET STRING,
lispEidRegistrationSiteDescription OCTET STRING, lispEidRegistrationSiteDescription OCTET STRING,
lispEidRegistrationIsRegistered TruthValue, lispEidRegistrationIsRegistered TruthValue,
lispEidRegistrationFirstTimeStamp TimeStamp, lispEidRegistrationFirstTimeStamp TimeStamp,
lispEidRegistrationLastTimeStamp TimeStamp, lispEidRegistrationLastTimeStamp TimeStamp,
lispEidRegistrationLastRegisterSenderLength Integer32, lispEidRegistrationLastRegisterSenderLength Integer32,
lispEidRegistrationLastRegisterSender LispAddressType, lispEidRegistrationLastRegisterSender LispAddressType,
lispEidRegistrationRouteTag Unsigned32,
lispEidRegistrationAuthenticationErrors Counter64, lispEidRegistrationAuthenticationErrors Counter64,
lispEidRegistrationRlocsMismatch Counter64 lispEidRegistrationRlocsMismatch Counter64
} }
lispEidRegistrationEidLength OBJECT-TYPE lispEidRegistrationEidLength OBJECT-TYPE
SYNTAX Integer32 (5..259) SYNTAX Integer32 (5..259)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to get the octet-length of "This object is used to get the octet-length of
lispEidRegistrationEid, the next object." lispEidRegistrationEid."
::= { lispEidRegistrationEntry 1 } ::= { lispEidRegistrationEntry 1 }
lispEidRegistrationEid OBJECT-TYPE lispEidRegistrationEid OBJECT-TYPE
SYNTAX LispAddressType SYNTAX LispAddressType
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The EID prefix that is being registered." "The EID prefix that is being registered."
::= { lispEidRegistrationEntry 2 } ::= { lispEidRegistrationEntry 2 }
skipping to change at page 38, line 49 skipping to change at page 39, line 43
prefix that is being registered belongs to this site." prefix that is being registered belongs to this site."
::= { lispEidRegistrationEntry 4 } ::= { lispEidRegistrationEntry 4 }
lispEidRegistrationIsRegistered OBJECT-TYPE lispEidRegistrationIsRegistered OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates the registration status of the given EID prefix. "Indicates the registration status of the given EID prefix.
If this object is TRUE, then it means the EID prefix is If this object is TRUE, then it means the EID prefix is
registered." registered.
The value FALSE implies the EID prefix is not registered
with the Map Server. There are multiple scenarios when this
could happen like authentication failures, routing problems,
misconfigs to name a few."
::= { lispEidRegistrationEntry 5 } ::= { lispEidRegistrationEntry 5 }
lispEidRegistrationFirstTimeStamp OBJECT-TYPE lispEidRegistrationFirstTimeStamp OBJECT-TYPE
SYNTAX TimeStamp SYNTAX TimeStamp
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of sysUpTime at which the first valid register "The value of sysUpTime at which the first valid register
message for the EID Prefix information represented by this message for the EID Prefix information represented by this
entry was received by this device. entry was received by this device.
skipping to change at page 39, line 52 skipping to change at page 40, line 50
lispEidRegistrationLastRegisterSender OBJECT-TYPE lispEidRegistrationLastRegisterSender OBJECT-TYPE
SYNTAX LispAddressType SYNTAX LispAddressType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Source address of the last valid register message for the "Source address of the last valid register message for the
given EID prefix that was received by this device." given EID prefix that was received by this device."
::= { lispEidRegistrationEntry 9 } ::= { lispEidRegistrationEntry 9 }
lispEidRegistrationRouteTag OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of the routing table tag assigned to the given EID
prefix."
::= { lispEidRegistrationEntry 10 }
lispEidRegistrationAuthenticationErrors OBJECT-TYPE lispEidRegistrationAuthenticationErrors OBJECT-TYPE
SYNTAX Counter64 SYNTAX Counter64
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of total authentication errors of map-registers "Count of total authentication errors of map-registers
received for the given EID prefix. received for the given EID prefix.
Discontinuities in this monotonically increasing value occur Discontinuities in this monotonically increasing value occur
at re-initialization of the management system. at re-initialization of the management system.
Discontinuities can also occur as a result of site config Discontinuities can also occur as a result of site config
changes, which can be detected by observing the value of changes, which can be detected by observing the value of
lispEidRegistrationFirstTimeStamp." lispEidRegistrationFirstTimeStamp."
::= { lispEidRegistrationEntry 11 } ::= { lispEidRegistrationEntry 10 }
lispEidRegistrationRlocsMismatch OBJECT-TYPE lispEidRegistrationRlocsMismatch OBJECT-TYPE
SYNTAX Counter64 SYNTAX Counter64
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of total map-registers received that had at least one "Count of total map-registers received that had at least one
RLOC that was not in the allowed list of RLOCs for the given RLOC that was not in the allowed list of RLOCs for the given
EID prefix. EID prefix.
Discontinuities in this monotonically increasing value occur Discontinuities in this monotonically increasing value occur
at re-initialization of the management system. at re-initialization of the management system.
Discontinuities can also occur as a result of site config Discontinuities can also occur as a result of site config
changes, which can be detected by observing the value of changes, which can be detected by observing the value of
lispEidRegistrationFirstTimeStamp." lispEidRegistrationFirstTimeStamp."
::= { lispEidRegistrationEntry 12 } ::= { lispEidRegistrationEntry 11 }
lispEidRegistrationEtrTable OBJECT-TYPE lispEidRegistrationEtrTable OBJECT-TYPE
SYNTAX SEQUENCE OF LispEidRegistrationEtrEntry SYNTAX SEQUENCE OF LispEidRegistrationEtrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table provides the properties of ETRs that register "This table provides the properties of ETRs that register
the given EID prefix with this device when configured to the given EID prefix with this device when configured to
be a Map-Server." be a Map-Server."
REFERENCE REFERENCE
"[LISP], Section 6.1." "draft-ietf-lisp-23.txt, Section 6.1."
::= { lispObjects 10 } ::= { lispObjects 10 }
lispEidRegistrationEtrEntry OBJECT-TYPE lispEidRegistrationEtrEntry OBJECT-TYPE
SYNTAX LispEidRegistrationEtrEntry SYNTAX LispEidRegistrationEtrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry (conceptual row) in the "An entry (conceptual row) in the
lispEidRegistrationEtrTable." lispEidRegistrationEtrTable."
INDEX { lispEidRegistrationEidLength, INDEX { lispEidRegistrationEidLength,
skipping to change at page 41, line 37 skipping to change at page 42, line 26
lispEidRegistrationEtrProxyReply TruthValue, lispEidRegistrationEtrProxyReply TruthValue,
lispEidRegistrationEtrWantsMapNotify TruthValue lispEidRegistrationEtrWantsMapNotify TruthValue
} }
lispEidRegistrationEtrSenderLength OBJECT-TYPE lispEidRegistrationEtrSenderLength OBJECT-TYPE
SYNTAX Integer32 (5..259) SYNTAX Integer32 (5..259)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to get the octet-length of "This object is used to get the octet-length of
lispEidRegistrationEtrSender, the next object." lispEidRegistrationEtrSender."
::= { lispEidRegistrationEtrEntry 1 } ::= { lispEidRegistrationEtrEntry 1 }
lispEidRegistrationEtrSender OBJECT-TYPE lispEidRegistrationEtrSender OBJECT-TYPE
SYNTAX LispAddressType SYNTAX LispAddressType
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Source address of the ETR that is sending valid register "Source address of the ETR that is sending valid register
messages for this EID prefix to this device." messages for this EID prefix to this device."
::= { lispEidRegistrationEtrEntry 2 } ::= { lispEidRegistrationEtrEntry 2 }
skipping to change at page 43, line 4 skipping to change at page 43, line 42
::= { lispEidRegistrationEtrEntry 6 } ::= { lispEidRegistrationEtrEntry 6 }
lispEidRegistrationLocatorTable OBJECT-TYPE lispEidRegistrationLocatorTable OBJECT-TYPE
SYNTAX SEQUENCE OF LispEidRegistrationLocatorEntry SYNTAX SEQUENCE OF LispEidRegistrationLocatorEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table provides the properties of all locators per "This table provides the properties of all locators per
LISP site that are served by this device when configured LISP site that are served by this device when configured
to be a Map-Server." to be a Map-Server."
REFERENCE REFERENCE
"[LISP], Section 6.1." "draft-ietf-lisp-23.txt, Section 6.1."
::= { lispObjects 11 } ::= { lispObjects 11 }
lispEidRegistrationLocatorEntry OBJECT-TYPE lispEidRegistrationLocatorEntry OBJECT-TYPE
SYNTAX LispEidRegistrationLocatorEntry SYNTAX LispEidRegistrationLocatorEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry (conceptual row) in the "An entry (conceptual row) in the
lispEidRegistrationLocatorTable." lispEidRegistrationLocatorTable."
INDEX { lispEidRegistrationEidLength, INDEX { lispEidRegistrationEidLength,
skipping to change at page 43, line 41 skipping to change at page 44, line 30
lispEidRegistrationLocatorMPriority Integer32, lispEidRegistrationLocatorMPriority Integer32,
lispEidRegistrationLocatorMWeight Integer32 lispEidRegistrationLocatorMWeight Integer32
} }
lispEidRegistrationLocatorRlocLength OBJECT-TYPE lispEidRegistrationLocatorRlocLength OBJECT-TYPE
SYNTAX Integer32 (5..259) SYNTAX Integer32 (5..259)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to get the octet-length of "This object is used to get the octet-length of
lispEidRegistrationLocatorRloc, the next object." lispEidRegistrationLocatorRloc."
::= { lispEidRegistrationLocatorEntry 1 } ::= { lispEidRegistrationLocatorEntry 1 }
lispEidRegistrationLocatorRloc OBJECT-TYPE lispEidRegistrationLocatorRloc OBJECT-TYPE
SYNTAX LispAddressType SYNTAX LispAddressType
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The locator of the given EID prefix being registered by the "The locator of the given EID prefix being registered by the
given ETR with this device." given ETR with this device."
::= { lispEidRegistrationLocatorEntry 2 } ::= { lispEidRegistrationLocatorEntry 2 }
skipping to change at page 45, line 22 skipping to change at page 46, line 13
::= { lispEidRegistrationLocatorEntry 8 } ::= { lispEidRegistrationLocatorEntry 8 }
lispUseMapServerTable OBJECT-TYPE lispUseMapServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF LispUseMapServerEntry SYNTAX SEQUENCE OF LispUseMapServerEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table provides the properties of the map-server(s) "This table provides the properties of the map-server(s)
with which this device is configured to register." with which this device is configured to register."
REFERENCE REFERENCE
"[LISP-MS], Section 4.3." "draft-ietf-lisp-ms-16.txt, Section 4.3."
::= { lispObjects 12 } ::= { lispObjects 12 }
lispUseMapServerEntry OBJECT-TYPE lispUseMapServerEntry OBJECT-TYPE
SYNTAX LispUseMapServerEntry SYNTAX LispUseMapServerEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry (conceptual row) in the lispUseMapServerTable." "An entry (conceptual row) in the lispUseMapServerTable."
INDEX { lispUseMapServerAddressLength, INDEX { lispUseMapServerAddressLength,
lispUseMapServerAddress } lispUseMapServerAddress }
skipping to change at page 45, line 47 skipping to change at page 46, line 38
lispUseMapServerAddress LispAddressType, lispUseMapServerAddress LispAddressType,
lispUseMapServerState INTEGER lispUseMapServerState INTEGER
} }
lispUseMapServerAddressLength OBJECT-TYPE lispUseMapServerAddressLength OBJECT-TYPE
SYNTAX Integer32 (5..259) SYNTAX Integer32 (5..259)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to get the octet-length of "This object is used to get the octet-length of
lispUseMapServerAddress, the next object." lispUseMapServerAddress."
::= { lispUseMapServerEntry 1 } ::= { lispUseMapServerEntry 1 }
lispUseMapServerAddress OBJECT-TYPE lispUseMapServerAddress OBJECT-TYPE
SYNTAX LispAddressType SYNTAX LispAddressType
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Address of Map-Server configured on this device." "Address of Map-Server configured on this device."
::= { lispUseMapServerEntry 2 } ::= { lispUseMapServerEntry 2 }
lispUseMapServerState OBJECT-TYPE lispUseMapServerState OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
up (1), up (1),
down (2) down (2),
unreachable (3)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"State of this Map-Server configured on this device "State of this Map-Server configured on this device
(1 = Map-Server is up; 2 = Map-Server is down)." (1 = Map-Server is up; 2 = Map-Server is down)."
::= { lispUseMapServerEntry 3 } ::= { lispUseMapServerEntry 3 }
lispUseMapResolverTable OBJECT-TYPE lispUseMapResolverTable OBJECT-TYPE
SYNTAX SEQUENCE OF LispUseMapResolverEntry SYNTAX SEQUENCE OF LispUseMapResolverEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table provides the properties of the map-resolver(s) "This table provides the properties of the map-resolver(s)
this device is configured to use." this device is configured to use."
REFERENCE REFERENCE
"[LISP-MS], Section 4.4." "draft-ietf-lisp-ms-16.txt, Section 4.4."
::= { lispObjects 13 } ::= { lispObjects 13 }
lispUseMapResolverEntry OBJECT-TYPE lispUseMapResolverEntry OBJECT-TYPE
SYNTAX LispUseMapResolverEntry SYNTAX LispUseMapResolverEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry (conceptual row) in the "An entry (conceptual row) in the
lispUseMapResolverTable." lispUseMapResolverTable."
INDEX { lispUseMapResolverAddressLength, INDEX { lispUseMapResolverAddressLength,
skipping to change at page 47, line 9 skipping to change at page 47, line 47
lispUseMapResolverAddress LispAddressType, lispUseMapResolverAddress LispAddressType,
lispUseMapResolverState INTEGER lispUseMapResolverState INTEGER
} }
lispUseMapResolverAddressLength OBJECT-TYPE lispUseMapResolverAddressLength OBJECT-TYPE
SYNTAX Integer32 (5..259) SYNTAX Integer32 (5..259)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to get the octet-length of "This object is used to get the octet-length of
lispUseMapResolverAddress, the next object." lispUseMapResolverAddress."
::= { lispUseMapResolverEntry 1 } ::= { lispUseMapResolverEntry 1 }
lispUseMapResolverAddress OBJECT-TYPE lispUseMapResolverAddress OBJECT-TYPE
SYNTAX LispAddressType SYNTAX LispAddressType
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Address of map-resolver configured on this device." "Address of map-resolver configured on this device."
::= { lispUseMapResolverEntry 2 } ::= { lispUseMapResolverEntry 2 }
skipping to change at page 47, line 40 skipping to change at page 48, line 31
::= { lispUseMapResolverEntry 3 } ::= { lispUseMapResolverEntry 3 }
lispUseProxyEtrTable OBJECT-TYPE lispUseProxyEtrTable OBJECT-TYPE
SYNTAX SEQUENCE OF LispUseProxyEtrEntry SYNTAX SEQUENCE OF LispUseProxyEtrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table provides the properties of all Proxy ETRs that "This table provides the properties of all Proxy ETRs that
this device is configured to use." this device is configured to use."
REFERENCE REFERENCE
"[INTERWORK], Section 6.0." "draft-ietf-lisp-ms-16.txt, Section 6.0."
::= { lispObjects 14 } ::= { lispObjects 14 }
lispUseProxyEtrEntry OBJECT-TYPE lispUseProxyEtrEntry OBJECT-TYPE
SYNTAX LispUseProxyEtrEntry SYNTAX LispUseProxyEtrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry (conceptual row) in the "An entry (conceptual row) in the
lispUseProxyEtrTable." lispUseProxyEtrTable."
INDEX { lispUseProxyEtrAddressLength, INDEX { lispUseProxyEtrAddressLength,
skipping to change at page 48, line 23 skipping to change at page 49, line 14
lispUseProxyEtrMWeight Integer32, lispUseProxyEtrMWeight Integer32,
lispUseProxyEtrState INTEGER lispUseProxyEtrState INTEGER
} }
lispUseProxyEtrAddressLength OBJECT-TYPE lispUseProxyEtrAddressLength OBJECT-TYPE
SYNTAX Integer32 (5..259) SYNTAX Integer32 (5..259)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to get the octet-length of "This object is used to get the octet-length of
lispUseProxyEtrAddress, the next object." lispUseProxyEtrAddress."
::= { lispUseProxyEtrEntry 1 } ::= { lispUseProxyEtrEntry 1 }
lispUseProxyEtrAddress OBJECT-TYPE lispUseProxyEtrAddress OBJECT-TYPE
SYNTAX LispAddressType SYNTAX LispAddressType
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Address of Proxy ETR configured on this device." "Address of Proxy ETR configured on this device."
::= { lispUseProxyEtrEntry 2 } ::= { lispUseProxyEtrEntry 2 }
skipping to change at page 49, line 37 skipping to change at page 50, line 28
(0 = Proxy ETR is down; 1 = Proxy ETR is up)." (0 = Proxy ETR is down; 1 = Proxy ETR is up)."
::= { lispUseProxyEtrEntry 7 } ::= { lispUseProxyEtrEntry 7 }
-- --
-- Conformance Information -- Conformance Information
-- --
lispCompliances OBJECT IDENTIFIER ::= { lispConformance 1 } lispCompliances OBJECT IDENTIFIER ::= { lispConformance 1 }
lispGroups OBJECT IDENTIFIER ::= { lispConformance 2 } lispGroups OBJECT IDENTIFIER ::= { lispConformance 2 }
-- --
-- Compliance Statements -- Compliance Statements
-- --
lispMIBComplianceEtr MODULE-COMPLIANCE lispMIBComplianceEtr MODULE-COMPLIANCE
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The compliance statement for LISP ETRs." "The compliance statement for LISP ETRs. It conveys
MODULE -- this module information if device supports ETR feature, and relevant
MANDATORY-GROUPS { lispMIBEtrGroup } state associated with that feature."
MODULE -- this module
MANDATORY-GROUPS { lispMIBEtrGroup }
GROUP lispMIBItrGroup GROUP lispMIBItrGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBPetrGroup GROUP lispMIBPetrGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBPitrGroup GROUP lispMIBPitrGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBMapServerGroup GROUP lispMIBMapServerGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBMapResolverGroup GROUP lispMIBMapResolverGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBEtrExtendedGroup GROUP lispMIBEtrExtendedGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBItrExtendedGroup GROUP lispMIBItrExtendedGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBMapServerExtendedGroup GROUP lispMIBMapServerExtendedGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBTuningParametersGroup GROUP lispMIBTuningParametersGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBEncapStatisticsGroup GROUP lispMIBEncapStatisticsGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBDecapStatisticsGroup GROUP lispMIBDecapStatisticsGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBDiagnosticsGroup GROUP lispMIBDiagnosticsGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBVrfGroup GROUP lispMIBVrfGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
::= { lispCompliances 1 } ::= { lispCompliances 1 }
lispMIBComplianceItr MODULE-COMPLIANCE lispMIBComplianceItr MODULE-COMPLIANCE
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The compliance statement for LISP ITRs." "The compliance statement for LISP ITRs. It conveys
MODULE -- this module information if device supports ITR feature, and any
MANDATORY-GROUPS { lispMIBItrGroup } state associated with that feature."
MODULE -- this module
MANDATORY-GROUPS { lispMIBItrGroup }
GROUP lispMIBEtrGroup GROUP lispMIBEtrGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBPetrGroup GROUP lispMIBPetrGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBPitrGroup GROUP lispMIBPitrGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBMapServerGroup GROUP lispMIBMapServerGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBMapResolverGroup GROUP lispMIBMapResolverGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBEtrExtendedGroup GROUP lispMIBEtrExtendedGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBItrExtendedGroup GROUP lispMIBItrExtendedGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBMapServerExtendedGroup GROUP lispMIBMapServerExtendedGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBTuningParametersGroup GROUP lispMIBTuningParametersGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBEncapStatisticsGroup GROUP lispMIBEncapStatisticsGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBDecapStatisticsGroup GROUP lispMIBDecapStatisticsGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBDiagnosticsGroup GROUP lispMIBDiagnosticsGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBVrfGroup GROUP lispMIBVrfGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
::= { lispCompliances 2 } ::= { lispCompliances 2 }
lispMIBCompliancePetr MODULE-COMPLIANCE lispMIBCompliancePetr MODULE-COMPLIANCE
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The compliance statement for LISP Proxy-ETRs." "The compliance statement for LISP Proxy-ETRs. It conveys
MODULE -- this module information if given device supports Proxy-ETR feature,
MANDATORY-GROUPS { lispMIBPetrGroup } and relevant state associated with that feature."
MODULE -- this module
MANDATORY-GROUPS { lispMIBPetrGroup }
GROUP lispMIBEtrGroup GROUP lispMIBEtrGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBItrGroup GROUP lispMIBItrGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBPitrGroup GROUP lispMIBPitrGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBMapServerGroup GROUP lispMIBMapServerGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBMapResolverGroup GROUP lispMIBMapResolverGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBEtrExtendedGroup GROUP lispMIBEtrExtendedGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBItrExtendedGroup GROUP lispMIBItrExtendedGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBMapServerExtendedGroup GROUP lispMIBMapServerExtendedGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBTuningParametersGroup GROUP lispMIBTuningParametersGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBEncapStatisticsGroup GROUP lispMIBEncapStatisticsGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBDecapStatisticsGroup GROUP lispMIBDecapStatisticsGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBDiagnosticsGroup GROUP lispMIBDiagnosticsGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBVrfGroup GROUP lispMIBVrfGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
::= { lispCompliances 3 } ::= { lispCompliances 3 }
lispMIBCompliancePitr MODULE-COMPLIANCE lispMIBCompliancePitr MODULE-COMPLIANCE
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The compliance statement for LISP Proxy-ITRs." "The compliance statement for LISP Proxy-ITRs. It conveys
MODULE -- this module information if device supports Proxy-ITR feature, and
MANDATORY-GROUPS { lispMIBPitrGroup } relevant state associated with that feature."
MODULE -- this module
MANDATORY-GROUPS { lispMIBPitrGroup }
GROUP lispMIBEtrGroup GROUP lispMIBEtrGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBItrGroup GROUP lispMIBItrGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBPetrGroup GROUP lispMIBPetrGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBMapServerGroup GROUP lispMIBMapServerGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBMapResolverGroup GROUP lispMIBMapResolverGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBEtrExtendedGroup GROUP lispMIBEtrExtendedGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBItrExtendedGroup GROUP lispMIBItrExtendedGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBMapServerExtendedGroup GROUP lispMIBMapServerExtendedGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBTuningParametersGroup GROUP lispMIBTuningParametersGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBEncapStatisticsGroup GROUP lispMIBEncapStatisticsGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBDecapStatisticsGroup GROUP lispMIBDecapStatisticsGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBDiagnosticsGroup GROUP lispMIBDiagnosticsGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBVrfGroup GROUP lispMIBVrfGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
::= { lispCompliances 4 } ::= { lispCompliances 4 }
lispMIBComplianceMapServer MODULE-COMPLIANCE lispMIBComplianceMapServer MODULE-COMPLIANCE
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The compliance statement for LISP Map Servers." "The compliance statement for LISP Map Servers. It
MODULE -- this module conveys information if device supports Map Server
MANDATORY-GROUPS { lispMIBMapServerGroup } feature, and relevant state associated with that
GROUP lispMIBEtrGroup feature."
DESCRIPTION
"This group is optional."
GROUP lispMIBItrGroup MODULE -- this module
DESCRIPTION MANDATORY-GROUPS { lispMIBMapServerGroup }
"This group is optional."
GROUP lispMIBPetrGroup GROUP lispMIBEtrGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBPitrGroup GROUP lispMIBItrGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBMapResolverGroup GROUP lispMIBPetrGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBEtrExtendedGroup GROUP lispMIBPitrGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBItrExtendedGroup GROUP lispMIBMapResolverGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBMapServerExtendedGroup GROUP lispMIBEtrExtendedGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBTuningParametersGroup GROUP lispMIBItrExtendedGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBEncapStatisticsGroup GROUP lispMIBMapServerExtendedGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBDecapStatisticsGroup GROUP lispMIBTuningParametersGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBDiagnosticsGroup GROUP lispMIBEncapStatisticsGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBVrfGroup GROUP lispMIBDecapStatisticsGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
::= { lispCompliances 5 } GROUP lispMIBDiagnosticsGroup
DESCRIPTION
"This group is optional."
lispMIBComplianceMapResolver MODULE-COMPLIANCE GROUP lispMIBVrfGroup
STATUS current DESCRIPTION
DESCRIPTION "This group is optional."
"The compliance statement for LISP Map Resolvers."
MODULE -- this module
MANDATORY-GROUPS { lispMIBMapResolverGroup }
GROUP lispMIBEtrGroup ::= { lispCompliances 5 }
DESCRIPTION
"This group is optional."
GROUP lispMIBItrGroup lispMIBComplianceMapResolver MODULE-COMPLIANCE
DESCRIPTION STATUS current
"This group is optional." DESCRIPTION
"The compliance statement for LISP Map Resolvers. It
conveys information if device supports Map Server
feature, and relevant state associated with that
feature."
MODULE -- this module
MANDATORY-GROUPS { lispMIBMapResolverGroup }
GROUP lispMIBPetrGroup GROUP lispMIBEtrGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBPitrGroup GROUP lispMIBItrGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBMapServerGroup GROUP lispMIBPetrGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBEtrExtendedGroup GROUP lispMIBPitrGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBItrExtendedGroup GROUP lispMIBMapServerGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBMapServerExtendedGroup GROUP lispMIBEtrExtendedGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBTuningParametersGroup GROUP lispMIBItrExtendedGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBEncapStatisticsGroup GROUP lispMIBMapServerExtendedGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBDecapStatisticsGroup GROUP lispMIBTuningParametersGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBDiagnosticsGroup GROUP lispMIBEncapStatisticsGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
GROUP lispMIBVrfGroup GROUP lispMIBDecapStatisticsGroup
DESCRIPTION DESCRIPTION
"This group is optional." "This group is optional."
::= { lispCompliances 6 } GROUP lispMIBDiagnosticsGroup
DESCRIPTION
"This group is optional."
GROUP lispMIBVrfGroup
DESCRIPTION
"This group is optional."
::= { lispCompliances 6 }
-- --
-- Units of Conformance -- Units of Conformance
-- --
lispMIBEtrGroup OBJECT-GROUP lispMIBEtrGroup OBJECT-GROUP
OBJECTS { lispFeaturesEtrEnabled, OBJECTS { lispFeaturesEtrEnabled,
lispMappingDatabaseLsb, lispMappingDatabaseLsb,
lispMappingDatabaseLocatorRlocPriority, lispMappingDatabaseLocatorRlocPriority,
lispMappingDatabaseLocatorRlocWeight, lispMappingDatabaseLocatorRlocWeight,
skipping to change at page 60, line 5 skipping to change at page 61, line 11
::= { lispGroups 8 } ::= { lispGroups 8 }
lispMIBMapServerExtendedGroup OBJECT-GROUP lispMIBMapServerExtendedGroup OBJECT-GROUP
OBJECTS { lispEidRegistrationSiteName, OBJECTS { lispEidRegistrationSiteName,
lispEidRegistrationSiteDescription, lispEidRegistrationSiteDescription,
lispEidRegistrationIsRegistered, lispEidRegistrationIsRegistered,
lispEidRegistrationFirstTimeStamp, lispEidRegistrationFirstTimeStamp,
lispEidRegistrationLastTimeStamp, lispEidRegistrationLastTimeStamp,
lispEidRegistrationLastRegisterSenderLength, lispEidRegistrationLastRegisterSenderLength,
lispEidRegistrationLastRegisterSender, lispEidRegistrationLastRegisterSender,
lispEidRegistrationRouteTag,
lispEidRegistrationEtrLastTimeStamp, lispEidRegistrationEtrLastTimeStamp,
lispEidRegistrationEtrTtl, lispEidRegistrationEtrTtl,
lispEidRegistrationEtrProxyReply, lispEidRegistrationEtrProxyReply,
lispEidRegistrationEtrWantsMapNotify, lispEidRegistrationEtrWantsMapNotify,
lispEidRegistrationLocatorIsLocal, lispEidRegistrationLocatorIsLocal,
lispEidRegistrationLocatorPriority, lispEidRegistrationLocatorPriority,
lispEidRegistrationLocatorWeight, lispEidRegistrationLocatorWeight,
lispEidRegistrationLocatorMPriority, lispEidRegistrationLocatorMPriority,
lispEidRegistrationLocatorMWeight lispEidRegistrationLocatorMWeight
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A collection of objects to support management "A collection of objects to support management
of LISP features and properties on Map Servers." of LISP features and properties on Map Servers
related to EID registrations."
::= { lispGroups 9 } ::= { lispGroups 9 }
lispMIBTuningParametersGroup OBJECT-GROUP lispMIBTuningParametersGroup OBJECT-GROUP
OBJECTS { lispFeaturesMapCacheLimit, OBJECTS { lispFeaturesMapCacheLimit,
lispFeaturesEtrMapCacheTtl lispFeaturesEtrMapCacheTtl
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A collection of writeable objects used to "A collection of writeable objects used to
configure LISP behavior and to tune performance." configure LISP behavior and to tune performance."
skipping to change at page 61, line 44 skipping to change at page 62, line 50
lispGlobalStatsMapRepliesIn, lispGlobalStatsMapRepliesIn,
lispGlobalStatsMapRepliesOut, lispGlobalStatsMapRepliesOut,
lispGlobalStatsMapRegistersIn, lispGlobalStatsMapRegistersIn,
lispGlobalStatsMapRegistersOut, lispGlobalStatsMapRegistersOut,
lispEidRegistrationAuthenticationErrors, lispEidRegistrationAuthenticationErrors,
lispEidRegistrationRlocsMismatch lispEidRegistrationRlocsMismatch
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Objects providing additional diagnostics "Objects providing additional diagnostics
related to a LISP router." related to a LISP router. These are related
to LISP control plane state."
::= { lispGroups 13 } ::= { lispGroups 13 }
lispMIBVrfGroup OBJECT-GROUP lispMIBVrfGroup OBJECT-GROUP
OBJECTS { lispIidToVrfName OBJECTS { lispIidToVrfName
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Objects providing information related to VRF "Objects providing information related to VRF
configurations on a LISP router." configurations on a LISP router."
::= { lispGroups 14 } ::= { lispGroups 14 }
 End of changes. 146 change blocks. 
354 lines changed or deleted 373 lines changed or added

This html diff was produced by rfcdiff 1.41. The latest version is available from http://tools.ietf.org/tools/rfcdiff/