DHC T. Huth Internet-Draft J. Freimann Intended status: Standards Track IBM Deutschland Research & Expires:
April 17,May 22, 2009 Development GmbH October 14,November 18, 2008 DHCPv6 option for network boot draft-ietf-dhc-dhcpv6-opt-netboot-01draft-ietf-dhc-dhcpv6-opt-netboot-02 Status of this Memo By submitting this Internet-Draft, each author represents that any applicable patent or other IPR claims of which he or she is aware have been or will be disclosed, and any of which he or she becomes aware will be disclosed, in accordance with Section 6 of BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet- Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt. The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html. This Internet-Draft will expire on April 17,May 22, 2009. Abstract The Dynamic Host Configuration Protocol for IPv6 (DHCPv6) provides a framework for passing configuration information to nodes on a network. This document describes a new option for DHCPv6 to convey information, required for network booting, to the nodes. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. Conventions . . . . . . . . . . . . . . . . . . . . . . . . . 3 3. Netboot option format . . . . . . . . . . . . . . . . . . . . 3 4. Suboptions . . . . . . . . . . . . . . . . . . . . . . . . . . 4 4.1. Suboption: Boot file Uniform Resource Locator (URL) . . . . .4 5.4.2. Suboption: Vendor class extension . . . . . . . . . . . . . .6 6.5. Appearance of these options . .the Netboot option . . . . . . . . . . . . . . . 7 7.6. Boot protocol considerations . . . . . . . . . . . . . . . . . 7 8.8 7. IANA considerations . . . . . . . . . . . . . . . . . . . . . 7 9.8 8. Security considerations . . . . . . . . . . . . . . . . . . . 8 10.9 9. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 8 11.9 10. References . . . . . . . . . . . . . . . . . . . . . . . . . . 9 22.214.171.124. Normative References . . . . . . . . . . . . . . . . . . . 9 126.96.36.199. Informative References . . . . . . . . . . . . . . . . . 9. 10 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 910 Intellectual Property and Copyright Statements . . . . . . . . . . 1112 1. Introduction Network booting means that a node which should be booted fetches the files required for booting via its network device from a server. Network booting is, for example, very useful in environments where the administrators have to maintain a large number of nodes. Since all boot and configuration files are stored on a central server, the maintenance of all nodes can be kept simple this way. A typical boot file would be, for example, an operating system kernel or a boot loader program. To be able to download such a file, the firmware (BIOS) running on the client node must be provided with information such as: the server on which the boot files can be found, the protocol to be used for the download (for example TFTP [RFC1350]) and the name of the boot file. Since some kernels or boot loaders need to be provided with additional parameters, there should also be the possibility to pass additional parameters along with the server address, the protocol and the file name. DHCPv6 allows client nodes to ask a DHCPv6 server for configuration parameters. Contrary to its IPv4 predecessor, DHCPv6 does not yet define a way to query network boot options such as the IPv6 address of a boot file server and boot file names. Therefore this document defines a new DHCPv6 option which is required for network booting clients. 2. Conventions The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [RFC2119]. Terminology specific to IPv6 and DHCPv6 are used in the same way as defined in the "Terminology" sections of RFC 3315 [RFC3315]. 3. Netboot option format The netboot option is used as an encapsulation for suboptions which carry the actual information needed to boot a client. This option will be used by clients to request boot information from a server. 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | OPT_NET_BOOT | option-len | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | suboption-code 1 | suboption-len | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | subopt-data 1 (variable length) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ . . . <multiple suboptions> . . . +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | suboption-code n | suboption-len | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | subopt-data n (variable length) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ option-code OPT_NET_BOOT (tbd).(TBD1). option-len Length of the netboot option in octets (not including the size of the option-code and option-lenoption- len fields). suboption-code, suboption-len and subopt-data together comprise a suboption for the netboot option. The 16-bit unsigned suboption-code values are drawn from a private namespace of the netboot option managed by IANA (cf. Section 8). The 16-bit unsigned suboption-len values indicate the length of the subopt-data field in octets. Multiple occurences of each suboption-type can occur within a netboot option (for example when more than one boot server is available). Clients MUST process the suboptions in the order in which they appear in the message sent by the server. So far, only the suboptions in the following chapters have been defined. Other suboptions might be defined in future RFCs. 4. Suboptions 4.1. Suboption: Boot file Uniform Resource Locator (URL) This suboption consists of multiple null-terminatedASCII strings. It is used to convey an URL to a boot file together with additional parameters for the boot file (e.g. parameters for the kernel or boot loader program). Since multiple occurrences of SUBOPT_BOOTFILE_URL can be present in a single OPT_NETBOOT message, clients MUST process them in the order in which they appear within the message. For example in the case of a boot file URL the first file should be downloaded and executed. In case of a failure the process should continue with the second one and so on.0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | SUBOPT_BOOTFILE_URL | suboption-len | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | bootfile-len | bootfile-url | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ (variable length) . (variable). | | '\0' |+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | param-len 1 | parameter 1 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ (variable length) . (variable). | | '\0' |+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ . . . <multiple Parameters> . . . +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | param-len n | parameter n | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ (variable length) . (variable). | | '\0' |+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Format description: suboption-code SUBOPT_BOOTFILE_URL (tbd).(1). suboption-len Length of the bootfile suboption in octets (not including the size of the suboption-code and suboption-len fields). bootfile-len 16-bit integer that specifies the length of the bootfile-url in octets (not including the bootfile- length field). bootfile-url This NULL-terminatedASCII string is the URL (conforming to [RFC2396]) to[RFC3986]) for a boot file. This string starts with the protocol which is used for downloading. Separated by '://',"://", the hostname or IPv6 address of the server hosting the boot file (see also the note below),below) follows, and then the path, file name and query parts of the URL follow.URL. The string is not null- terminated. param-len 1...n This is a 16-bit integer which specifies the length of the following parameter in octets (not including the parameter-length field). parameters 1...n These NULL-terminatedASCII strings are parameters needed for booting, e.g. kernel parameters. The strings are not null-terminated. The firmware should pass these parameters in the order they appear in the SUBOPT_BOOTFILE_URL suboption to the boot file which has been specified in the bootfile-url field. In cases where no parameters are needed, everything but the boot file URL (including its length field) can be omitted. Parameters following the boot file name should be directly related to the boot file (kernel) itself.Note about the bootfile-url: This string can either contain a hostname or ana literal IPv6 address to specify the server where the boot file should be downloaded from. All clients which implement support forthe SUBOPT_BOOTFILE_URL suboption MUST be able to handle IPv6 addresses here.here and SHOULD also be able to handle a hostname in the URL. The IPv6 address in the URL then MUST be enclosed in "[" and "]" characters, conforming to [RFC2732].[RFC3986]. Clients SHOULD also be able to handle hostnames in the URLs. However, in this case the firmware implementation on the client machine must support DNS, too. Due to size limitations, this might not be possible in all firmware implementations, so support for hostnames in the URLs is only optional. 5.Since multiple occurrences of SUBOPT_BOOTFILE_URL can be present in a single OPT_NETBOOT message, clients MUST process them in the order in which they appear within the message. For example in the case of a boot file URL the first file should be downloaded and executed. In case of a failure the process should continue with the second one and so on. 4.2. Suboption: Vendor class extension With this suboption, vendors can define their own netboot suboptions: It can be used by clients and servers to exchange vendor-specific information which is related to network booting. This suboption can occur multiple times within a OPT_NET_BOOT option (also with different enterprise-numbers in case a server and client implementation supports different vendor extensions). Clients MUST process them in the order in which they appear within the message. Unsupported vendor extensions MUST be ignored. 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | SUBOPT_NETBOOT_VENDOR | suboption-len | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | enterprise-number | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ . . . vendor-class-data . . (variable length) . . . +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Format description: suboption-code SUBOPT_NETBOOT_VENDOR (tbd).(2). suboption-len Length of the vendor class suboption in octets (not including the size of the suboption-code and suboption-len fields). enterprise-number The enterprise number of the vendor as registered with IANA (see [VENDORIDS]). vendor-class-data Vendor-specific information. The meaning is defined by the vendor identified by the enterprise-number. 6.It is suggested that the vendor-class-data SHOULD be composed of a series of separate items with a two-octets length field at the beginning of each item, as it is described for the vendor class option in chapter 22.16 of [RFC3315]. 5. Appearance of these optionsthe Netboot option The netboot option MUST NOT appear in DHCPv6 messages other than the types Solicit, Advertise, Request, Renew, Rebind, Information-Request and Reply. The numberoption-code of the netboot option MAY appear in the Option Request Option in the DHCPv6 message types Solicit, Request, Renew, Rebind, Information-Request and Reconfigure. The suboptions MUST appear only in the netboot option. 7.6. Boot protocol considerations RFC 906 [RFC906] suggests to use TFTP for bootstrap loading. Because it is easy to implement this protocol in firmware (where one has to deal with size and complexity constraints), this is still the recommended protocol for network booting. Every firmware implementation SHOULD at least support this protocol. The boot file URLs then must be specified according to RFC 3617 [RFC3617]. An alternative approach to TFTP network booting is to bootstrap the system with iSCSI. In this case, the URL in the SUBOPT_BOOTFILE_URL suboption MUST be specified according to the "iscsi:" string definition in chapter 5 of [RFC4173]. Note that [RFC4173] also suggests that the "iscsi:" string should be specified in the so- called "Root Path" option. However, this option does not exist for DHCPv6 yet, and with the SUBOPT_BOOTFILE_URL it is also not necessary anymore. So for IPv6 iSCSI booting, the "iscsi:" string MUST be specified as URL in the SUBOPT_BOOTFILE_URL suboption instead. In some different scenarios, it might also be useful to use other protocols like FTP or HTTP for network booting, so a firmware implementation can support these protocols, too. Then it is up to the network administrator to choose the appropriate boot protocol for the network, and to specify the right boot file URLs in the DHCPv6 server configuration file. 8.7. IANA considerations The following option needs to be assigned by the IANA from the option number space defined in the chapter 22 of the DHCPv6 RFC [RFC3315]. +--------------+-------+--------------+ | Option name | Value | Specified in | +--------------+-------+--------------+ | OPT_NET_BOOT | tbdTBD1 | Section 3 | +--------------+-------+--------------+ The netboot suboptions numbers formOPT_NET_BOOT option also defines a new name space16-bit integer suboption field, for which IANA is to be defined bycreate and maintain a new sub-registry entitled "Netboot Suboptions" under the IANA:OPT_NET_BOOT option. Initial values for the Netboot Suboptions registry are given below; future assignments are to be made through IETF Review (see [RFC5226]). Assignments consist of a suboption name and its associated value. +-----------------------+-------+--------------+ | Suboption name | Value | Specified in | +-----------------------+-------+--------------+ | SUBOPT_BOOTFILE_URL | tbd1 | Section 44.1 | | SUBOPT_NETBOOT_VENDOR | tbd2 | Section 54.2 | +-----------------------+-------+--------------+ 9.8. Security considerations The new DHCPv6 option described in this document could be sent in untrusted networks by malicious people with a fake DHCPv6 server to confuse the booting clients. The clients could be provided with a wrong URL so that the boot either fails, or even worse, the client boots the wrong operating system which has been provided by a malicious file server. To prevent this kind of attack, clients SHOULD use authentication of DHCPv6 messages (see chapter 21. in RFC 3315 [RFC3315]). Note also that DHCPv6 messages are sent unencrypted by default. So the boot file URL options are sent unencrypted over the network, too. This can become a security risk since the URLs can contain sensitive information like user names and passwords (for example a URL like "ftp://username:password@servername/path/file"). At the current point in time, there is no possibility to send encrypted DHCPv6 messages, so it is strongly recommended not to use sensitive information in the URLs in untrusted networks. 10.9. Acknowledgements The authors would like to thank Ketan P. Pancholi and Alfred Hoenes for corrections and suggestions. Vijayabhaskar Kalusivalingam and Senthil Balasubramanian published a similar draft for IPv6 network booting some years ago (available at http://tools.ietf.org/html/draft-ietf-dhc-dhcpv6-opt-rboot-00), which however was abandoned for unknown reasons. 11.10. References 188.8.131.52. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC2396] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform Resource Identifiers (URI): Generic Syntax", RFC 2396, August 1998. [RFC2732] Hinden, R., Carpenter, B., and L. Masinter, "Format for Literal IPv6 Addresses in URL's", RFC 2732, December 1999.[RFC3315] Droms, R., Bound, J., Volz, B., Lemon, T., Perkins, C., and M. Carney, "Dynamic Host Configuration Protocol for IPv6 (DHCPv6)", RFC 3315, July 2003. [RFC3617] Lear, E., "Uniform Resource Identifier (URI) Scheme and Applicability Statement for the Trivial File Transfer Protocol (TFTP)", RFC 3617, October 2003. [RFC3986] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform Resource Identifier (URI): Generic Syntax", STD 66, RFC 3986, January 2005. [RFC4173] Sarkar, P., Missimer, D., and C. Sapuntzakis, "Bootstrapping Clients using the Internet Small Computer System Interface (iSCSI) Protocol", RFC 4173, September 2005. [RFC5226] Narten, T. and H. Alvestrand, "Guidelines for Writing an IANA Considerations Section in RFCs", BCP 26, RFC 5226, May 2008. [VENDORIDS] IANA, "Private Enterprise Numbers", <http://www.iana.org/assignments/enterprise-numbers>. 184.108.40.206. Informative References [RFC1350] Sollins, K., "The TFTP Protocol (Revision 2)", STD 33, RFC 1350, July 1992. [RFC906] Finlayson, R., "Bootstrap Loading using TFTP", RFC 906, June 1984. Authors' Addresses Thomas H. Huth IBM Deutschland Research & Development GmbH Schoenaicher Strasse 220 Boeblingen 71032 Germany Phone: +49-7031-16-2183 Email: email@example.com Jens T. Freimann IBM Deutschland Research & Development GmbH Schoenaicher Strasse 220 Boeblingen 71032 Germany Phone: +49-7031-16-1122 Email: firstname.lastname@example.org Full Copyright Statement Copyright (C) The IETF Trust (2008). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Intellectual Property The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at email@example.com.